Hello,
I am trying to root my honor 7. But when i boot into fastboot it keeps saying installing update 5%. Even after 30 minutes it is still on 5%. I can reboot my phone and it works fine but it won't stop installing that update in fastboot (that won't install). Anyone got a solution for this? I did a factory reset already but it did not help.
Greet,
Jordy
jorzwa96 said:
Hello,
I am trying to root my honor 7. But when i boot into fastboot it keeps saying installing update 5%. Even after 30 minutes it is still on 5%. I can reboot my phone and it works fine but it won't stop installing that update in fastboot (that won't install). Anyone got a solution for this? I did a factory reset already but it did not help.
Greet,
Jordy
Click to expand...
Click to collapse
Flash stock ROM.
Related
I have the 32 GB retail model of the galaxy tab 10.1 and it was working perfectly and I had no problems until I tried to boot it up today. It gets stuck between the Samsung animation and the Samsung logo. I'm not very great with fixing these kinds of things so could someone walk me through it?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
1canine2 said:
I have the 32 GB retail model of the galaxy tab 10.1 and it was working perfectly and I had no problems until I tried to boot it up today. It gets stuck between the Samsung animation and the Samsung logo. I'm not very great with fixing these kinds of things so could someone walk me through it?
Click to expand...
Click to collapse
what was the last update you did to your tab? any app or tweak?
I once had a similar problem but doing a wipe/factory reset from the recovery menu seemed to fix it for me and I've had no problems since.
Ok thanks, I just did a factory reset and now its back to normal.
How do you do a Factory Wipe and reset? I cannot get mine to take the ClockworkMod Recovery.... I have tried many times to install it and Odin says that it was successful but when I try to boot into the CWM... All I get is the USB fastboot or Odin again... any suggestions? I am trying to fix my Boot Loop issues on Galaxy Tab 10.1
novafreak69 said:
How do you do a Factory Wipe and reset? I cannot get mine to take the ClockworkMod Recovery.... I have tried many times to install it and Odin says that it was successful but when I try to boot into the CWM... All I get is the USB fastboot or Odin again... any suggestions? I am trying to fix my Boot Loop issues on Galaxy Tab 10.1
Click to expand...
Click to collapse
If you have fastboot that means your tab is Google I/O tab. So i believe the method may be different to install CWM for you. Google it
Hi guys! Can you give me a tip? Since yesterday my tab got caught in a boot loop. Didn't made any changes, just went into it. I have rooted it a long time ago. I can't get into recovery mode by holding power+up. All I can get it the download mode that first says "waiting for usb cable" and if I connect it to the PC it goes to "press the [START] of Odin3". Do I need to try the fastboot method and reset it to factory details? I've being trying to do that but no devices were listed... Or do I need to reflash something with oding again? Please, just give me a tip.
nightrave said:
Hi guys! Can you give me a tip? Since yesterday my tab got caught in a boot loop. Didn't made any changes, just went into it. I have rooted it a long time ago. I can't get into recovery mode by holding power+up. All I can get it the download mode that first says "waiting for usb cable" and if I connect it to the PC it goes to "press the [START] of Odin3". Do I need to try the fastboot method and reset it to factory details? I've being trying to do that but no devices were listed... Or do I need to reflash something with oding again? Please, just give me a tip.
Click to expand...
Click to collapse
Hey nightrave
I got caught in a bootloop the other day after updating to 3.2 from 3.1, my tab was rooted and running the starburst ROM. When I rebooted it it keeped getting stuck on the logo screen, and my device wasn't being recognized when I plugged it into my PC. I found a file online for the stock 3.1 firmware and flashed it using Odin and it got it out of the boot loop. If you can't go into CWM to flash a rom or do a recovery I would try using ODIN to flash the firmware your device was on. I ended up flashing the firmware for 3.2 the same way and the Galaxy Task 10 ROM. Let me know if that helps
app not working
i downloaded an app and it was working fine for a few days and now when i go use it i get an error msg and it kicks me out of the app. ive deleted and reinstalled app a few times but it still does it. what do i do?
Did u try goin on rom manager and clicking fix permissions.. its suppose to fix any force close issues, not sure if that would work.
I was able to fix my issue by installing a 3.2 rom. My tablet is not bricked anymore
Getting a com.android.phone error now but i'm trying to figure it out.
Hey, I think the phone is totally brick, can anyone confirm it? Here we go
The phone came totally crazy and it has restart automatically, and went to the Fastboot mode. (i dont know if it was updating something, i had not using it). So, I've UNLOCKED it with the code that Huawei brings, till here everything is fine. The problem becames when I try to flash the CUST, CACHE, ABOOT, and the others that I think that are useless, it says
"FAILED (remote: Command not allowed)". But I can flash SYSTEM, RECOVERY, BOOT and USERDATA correctly. But that doesn't solve the problem of the LOOP RESTART, it show the Logo of Huawei and keeps restarting. I also tried 3 other stock roms, and the problem persists. Also tried putting the dload in SD with the UPDATE.app, and starting the phone with 3 buttons pressed and I have the error of "Error:update.app is a invalid package" and doens't work. (If i go to the Recovery it just stay for 1-2 seconds and automatically restart again). I don't think it could be the power button because it stays well in the Fastboot mode and also tried the CWM and works. I've been searching solutions for around 5 hours and didn't found any. I wish someone could help me, thanks in advance!
PD: I have the ADB Drivers updated.
live it
Hello
I have a problem with my new phone :/. I bought honor 9 yesterday. Today I update it to C432B183 by HiSuite. Then phone found and installed C432B360 update by ota . Unfortunately Phone found update C432B368 by ota(? I'm note sure this number) and installation failed. I tried to download C432B360 by erecovery, but it failed too. What can I do? Is it normal to brick the phone by downloading update? Should I send it to warranty?
Thank you for your answers.
You can't boot anymore in normal mode ?
I can't. It show only honor logo, then system shut down and I'm in recovery.
As eRecovery does not help ;
Boot to Recovery and try one of these :
-wipe cache
-wipe data / factory reset
Hold down volumeUp when booting for enter in recovery mode.
I tried this too, but it didn't help. The strangest thing is that erecovery starts redownloading from 30%.
Bootloader unlocked ?
Thank you for help. The phone is working again. I don't know how, but I tried download rom through erecovery again and it start working. I don't have bootloader unlocked. But I learned it's very dangerous to update phone and I shouldn't do this again.
Hi, im have a Xiaomi mi 8 lite 64gb, the device is randomly reboot in android and in recovery, the screen goes black and the device reboot, wifi or mobile data dont work, but when reboot work normally, later reboot and does not work anymore than a other reboot, when start to work with no problem, any idea ?
MauroGimenez483 said:
Hi, im have a Xiaomi mi 8 lite 64gb, the device is randomly reboot in android and in recovery, the screen goes black and the device reboot, wifi or mobile data dont work, but when reboot work normally, later reboot and does not work anymore than a other reboot, when start to work with no problem, any idea ?
Click to expand...
Click to collapse
Hello, try a factory reset first and see if your phone keeps rebooting without reason. If you got the same problem go flash again your firmware using mi flash tool. You can find the firmware here : https://mirom.ezbox.idv.tw/en/phone/platina/
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciated.
I am afraid there is nothing much to do, other than bring it in for repair.
You could try to deplete the battery completely, then charge it to 100% again.
Sometimes when battery if fully depleted, the device resets itself.
It's a long shot, but worth the try.
this most recent update is a bad one.
thejohnsmith13th said:
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciated.
Click to expand...
Click to collapse
Try to boot in safe mode and if it's done, you'll be able to backup and hard reset
skimminstones said:
this most recent update is a bad one.
Click to expand...
Click to collapse
I have no problems with this updatee
thejohnsmith13th said:
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciat
Click to expand...
Click to collapse
thejohnsmith13th said:
I got new OTA on my Reno2, update was installed successfully, But Now My phone is stuck in BootLoop and reboot nonstops. I can't get in Recovery mode or in fastboot Nothing works. Is there any solution to this? Any help will be much appreciated.
Click to expand...
Click to collapse
You can go into recovery : shutdown the phone and to start (you can try during the reboot, before logo Oppo appear) press volume down and power button during 6 or 7 second max. You need to stop pressing buttons before the and of the oppo logo. I tried now and I had a language menu (English and 2 others from Asia) and different solution like reset...