Hello everyone, I am new here, and I want to ask omething, after I turned off my Samung J7 Prime (Trying to restart it), it diddnt restart and says "Custom Binary Blocked by FRP Lock", I have stock rom odin in diffrent versions, i thried them but they fail, I saw in one thread that you need to Reformat your device, but when I am trying, to go to recovery mode, It says Recovery is Not Seandroid Enforcing, I cant use Recovery mode, I tried download mode but its blocked by FRP Lock so I cant use or flash orreformat my device, I hope I dont get ****ed! Please help really need all your help! Thank you, Hope my phone gets fixed!
" It all started when I turned off oem unlock and rebooted m phone"
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
abhinavp649 said:
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
Click to expand...
Click to collapse
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Im sorry but It diddnt work.
Also I cannot access my recovery mode It says RECOVERY IS NOT SEANDROID ENFORCING.
MakiBaka30 said:
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Click to expand...
Click to collapse
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
abhinavp649 said:
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
Click to expand...
Click to collapse
Wait, I will check, but just to make sure what kind of file should a stock rom be?
MakiBaka30 said:
Wait, I will check, but just to make sure what kind of file should a stock rom be?
Click to expand...
Click to collapse
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
abhinavp649 said:
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
Click to expand...
Click to collapse
Ok tnx, I will Check
Hey Its J7 Prime with nnon removable battery ...... Actually I turned off oem lock and restarted the phone with custom rom ........ and its says custom binary blocked by frp lock and when i unbrick using odin ...... it is also not installing ....... in the download mode also displays the same message ...... please bro help me....:crying::crying::crying::crying::crying:
Search for your stock roms here
https://updato.com/firmware-archive-select-model
https://www.sammobile.com/firmwares/
Related
well hello guys my friend bricked my other friends well he tried to install a custom rom using odin and it lead the phone to be bricked there was a message saying firmware upgrade issue please connnect to kies and i dont remeber the rest but i followe a tutorial about how to fix it which was with odin flashin a cwm when i flashed the phone was turning one but only when it connects to charge and stuck on galaxy logo
well then after searching it turned out i need to flash it with omap well i did it but now i get "logo.jpg' draw failed
when i try to enter the download mode i get 'ani_upload_unknown_4_reset.jpg' draw error well i flashed the original sbl.bin params.lfs mho which i extracted from the stock firmware the same problem my theory its that it cant draw the images from the sbl.bin for some error and i cant use a jig to enter force dowload mode still i have to wait or my jig to arrive
so any ideas .. is it possible to edit the images on the sbl.bin or try to pass it so it wont load the images? any tips help please
did you flash the good firmware? the Galaxy s2 plus firmware and not the galaxy s2 firmware cause the phones are a bit different
and much people are doing that
I can't even flash any rom
...
The phone won't get in download mode but when I try t get and get the ani_upload_ jpg error it gets stuck at setup connection in Odin
Is theres any way to flash. A firmware with Omap ? Or kernel or anything that would make the phone gets on download mode
(BP)blackclouds said:
I can't even flash any rom
...
The phone won't get in download mode but when I try t get and get the ani_upload_ jpg error it gets stuck at setup connection in Odin
Is theres any way to flash. A firmware with Omap ? Or kernel or anything that would make the phone gets on download mode
Click to expand...
Click to collapse
i don't know that much from galaxy s2plus and omapflashing but also look here i think that you've already readed it but i wil watch tomorrow to it and find it out if it can or not.http://forum.xda-developers.com/showthread.php?t=1701471 watch by download or uboot i need to sleep now hope you also can make some progress in the night
and can you also explain advanced what you al did so we know a bit how it go wrong or where so we know where to look for
tried
wulsic said:
i don't know that much from galaxy s2plus and omapflashing but also look here i think that you've already readed it but i wil watch tomorrow to it and find it out if it can or not.http://forum.xda-developers.com/showthread.php?t=1701471 watch by download or uboot i need to sleep now hope you also can make some progress in the night
and can you also explain advanced what you al did so we know a bit how it go wrong or where so we know where to look for
Click to expand...
Click to collapse
well i stayed up all night and somehow i manager to use omapflash and flashed some files ok so and the phone is on download mode really somehow i didnt know what i did then on odin i forgot to the tick the reparition so it said error after that i tried again and its now stuck on setupconnection so i tturned the phone off then tried to turn it back on or get into download mode nothing on screen
but when trying to enter the download mode still its detetcetd on odin but nothing on screen and it stuck on setupconnection idk why but ill try
when i was about to go to sleep and turned my lights off i noticed that screen was on but the light wasnt that strong i guess the screen isnt broeken or something cause if so clikcing the voloume up would get me in download mode
(BP)blackclouds said:
well i stayed up all night and somehow i manager to use omapflash and flashed some files ok so and the phone is on download mode really somehow i didnt know what i did then on odin i forgot to the tick the reparition so it said error after that i tried again and its now stuck on setupconnection so i tturned the phone off then tried to turn it back on or get into download mode nothing on screen
but when trying to enter the download mode still its detetcetd on odin but nothing on screen and it stuck on setupconnection idk why but ill try
when i was about to go to sleep and turned my lights off i noticed that screen was on but the light wasnt that strong i guess the screen isnt broeken or something cause if so clikcing the voloume up would get me in download mode
Click to expand...
Click to collapse
i don't really know much things but i think the .pit file was going to be flashed but you need to repartition to do it so if you
and last option is to check this btw i know you have a problem with download mode but what says if you enter recovery mode with
volume button up+Homebutton and 3 seconds power button?
check also this link out http://forum.xda-developers.com/showthread.php?t=2261153
also try reinstalling the usb drivers
since your phone still can boot up i think the phone is soft bricked
wulsic said:
i don't really know much things but i think the .pit file was going to be flashed but you need to repartition to do it so if you
and last option is to check this btw i know you have a problem with download mode but what says if you enter recovery mode with
volume button up+Homebutton and 3 seconds power button?
check also this link out http://forum.xda-developers.com/showthread.php?t=2261153
also try reinstalling the usb drivers
since your phone still can boot up i think the phone is soft bricked
Click to expand...
Click to collapse
yeah i manager to get it to odin and flashed the stock recovery and reparition it
but not it stuck on the samsung animation logo
after that i installed the CM rom with CWM still the same stuck on cyanogenmod screen
on recovery mode it says failed to mount:efs argument error i think the error is cause of efs thing not sure what it is
(BP)blackclouds said:
yeah i manager to get it to odin and flashed the stock recovery and reparition it
but not it stuck on the samsung animation logo
after that i installed the CM rom with CWM still the same stuck on cyanogenmod screen
on recovery mode it says failed to mount:efs argument error i think the error is cause of efs thing not sure what it is
Click to expand...
Click to collapse
so you have now managed to get to odin and flashed the recovery.
if so if you install the rom and like that don't forget to wipe data/factory reset and wipe dalvik cache
efs has to do with baseband imei and like that and blackclouds if you manage to get into odin then i would say to flash the original stock firmware if the device is charged 100% and then later to flash philz kernel to root and then to install custom rom and remove yellow triangle with chainfire's app.
See further for Efs by this link http://forum.xda-developers.com/showthread.php?t=1308546 hope i could help you a bit without owning a Plus.
wulsic said:
so you have now managed to get to odin and flashed the recovery.
if so if you install the rom and like that don't forget to wipe data/factory reset and wipe dalvik cache
efs has to do with baseband imei and like that and blackclouds if you manage to get into odin then i would say to flash the original stock firmware if the device is charged 100% and then later to flash philz kernel to root and then to install custom rom and remove yellow triangle with chainfire's app.
See further for Efs by this link http://forum.xda-developers.com/showthread.php?t=1308546 hope i could help you a bit without owning a Plus.
Click to expand...
Click to collapse
flashed the stock still the same problem custom rom still the same it's just idk how to mount the efs or fix the partition or get the efs.img to flash it via odin idk im lost my friend xD
after searching and trying to fix the efs nothing turned out to help on google or here so i came up with my own solution it was failing to mount the esf soo i just used the adb to make a new folder called esf the phone fianlly booted up thanks god well staying up all night helped lol
sometimes googling and searching dont help just using m own brain better
well the imei maybe null but i think it will work here xD
well you need the imei to go to playstore but good that you got it finally booting up goodluck with your or your friends phone hope that i could help also a bit.
Sent from my GT-I9100 using xda app-developers app
I tried to flash a rom using Odin but it failed. The phone now stuck at LOGO screen.
I entered download mode and noticed that the REACTIVATION LOCK is ON. I think it prevents Odin from flashing anything to the phone.
I tried to enter recovery mode, factory reset but still same. In recovery mode, there is a line saying "failed to mount /system".
I don't know what to do now. Please help.
coolplaymib said:
I tried to flash a rom using Odin but it failed. The phone now stuck at LOGO screen.
I entered download mode and noticed that the REACTIVATION LOCK is ON. I think it prevents Odin from flashing anything to the phone.
I tried to enter recovery mode, factory reset but still same. In recovery mode, there is a line saying "failed to mount /system".
I don't know what to do now. Please help.
Click to expand...
Click to collapse
Even if you got that message while in Download mode did you try and flash a stock firmware?
Sent from my Samsung Galaxy Tab Pro 10.1
Cr4z33 said:
Even if you got that message while in Download mode did you try and flash a stock firmware?
Sent from my Samsung Galaxy Tab Pro 10.1
Click to expand...
Click to collapse
Yes I tried to flash back to stock firmware but failed. I searched for solutions and it seems its because the reactivation lock is blocking odin from flashing anything to the phone.
Hello, did you try Smart Switch? I had a similar problem after rooting then stupidly activated Knox, but Reactivation Lock was OFF as once you root it seems like you can't enable it, my answer was Smart Switch which initialized everything
Skhulile said:
Hello, did you try Smart Switch? I had a similar problem after rooting then stupidly activated Knox, but Reactivation Lock was OFF as once you root it seems like you can't enable it, my answer was Smart Switch which initialized everything
Click to expand...
Click to collapse
Hi. Yes I tried smart switch, it says it can not reognise the device. After I failed to flash the ron for tge first time I was able to boot the phone, knox ask me to restart the phone so I did restart it. I think it was when reactivation lock was triggered. after that the phone is not able to be booted. No idea how to disable the lock.
coolplaymib said:
Hi. Yes I tried smart switch, it says it can not reognise the device. After I failed to flash the ron for tge first time I was able to boot the phone, knox ask me to restart the phone so I did restart it. I think it was when reactivation lock was triggered. after that the phone is not able to be booted. No idea how to disable the lock.
Click to expand...
Click to collapse
Dang! hopefully someone can help
coolplaymib said:
I tried to flash a rom using Odin but it failed. The phone now stuck at LOGO screen.
I entered download mode and noticed that the REACTIVATION LOCK is ON. I think it prevents Odin from flashing anything to the phone.
I tried to enter recovery mode, factory reset but still same. In recovery mode, there is a line saying "failed to mount /system".
I don't know what to do now. Please help.
Click to expand...
Click to collapse
Do you have the latest odin? Read somewhere someone with the same issue and the problem was odin. He installed the newest one and everything was fine.
Good luck
I am in same situation. Yesterday I was able to reinstall original firmware. Trick is to get Odin to recognize com port. By connecting to USB first and then entering download mode it seems to work.
Sent from my QTAQZ3 using XDA Free mobile app
Remove Samsung account. This will remove lock.
Sent from my QTAQZ3 using XDA Free mobile app
try hard reset with odin and use the latest version and don t forget to run it as administrator
chesterx1 said:
I am in same situation. Yesterday I was able to reinstall original firmware. Trick is to get Odin to recognize com port. By connecting to USB first and then entering download mode it seems to work.
Sent from my QTAQZ3 using XDA Free mobile app
Click to expand...
Click to collapse
How did you get to download mode? I'v been trying to figure that out for 3 days.
leaninphonesbruh said:
How did you get to download mode? I'v been trying to figure that out for 3 days.
Click to expand...
Click to collapse
press
Volume Down + Home + Power Button
It'll take you to download mode
subhy259 said:
press
Volume Down + Home + Power Button
It'll take you to download mode
Click to expand...
Click to collapse
// Iv tried that, Must be bricked or something. I can only reach recovery system but when I do it says failed to mount basically everything.
leaninphonesbruh said:
// Iv tried that, Must be bricked or something. I can only reach recovery system but when I do it says failed to mount basically everything.
Click to expand...
Click to collapse
Hold it down for like 20 seconds and keep repeating it. It will eventually boot into download mode.
Once in download mode just flash stock and it will work. Try it if you get any errors get back to me and ill help
anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?
Phone boots up , shows and samsung logo , all in 5-6 seconds, shuts down.
it's Hong Kong version c5000. cant flash china firmware because frp is on and bootloader is locked.
I flashed C5000ZHU1BRA1_C5000ZZH1BRA1_TGY with odin. atfer it shows PASS, phone boots into recovery, shows "erasing......" ... and reboots then same problem.
combinations dont work either , it says frp on , ignoring pit download..
Thanks in advance
superyacine1994 said:
Phone boots up , shows and samsung logo , all in 5-6 seconds, shuts down.
it's Hong Kong version c5000. cant flash china firmware because frp is on and bootloader is locked.
I flashed C5000ZHU1BRA1_C5000ZZH1BRA1_TGY with odin. atfer it shows PASS, phone boots into recovery, shows "erasing......" ... and reboots then same problem.
combinations dont work either , it says frp on , ignoring pit download..
Thanks in advance
Click to expand...
Click to collapse
Hi , download this one :
https://updato.com/firmware-archive-select-model?record=012D128981D811E89F15FA163EE8F90B
You can use IDM - Internet Download Manager or other download manager to speed up your downloading ...
Use Latest Version of Odin :
https://odindownload.com/
Before you are trying to flash please make sure your battery is more than 60 % , is better to be full .
Good luck ....
Teddy Lo said:
Hi , download this one :
https://updato.com/firmware-archive-select-model?record=012D128981D811E89F15FA163EE8F90B
You can use IDM - Internet Download Manager or other download manager to speed up your downloading ...
Use Latest Version of Odin :
https://odindownload.com/
Before you are trying to flash please make sure your battery is more than 60 % , is better to be full .
Good luck ....
Click to expand...
Click to collapse
I installed C5000ZZH1BRE3
Same problem so far,
the installation succeeds but after the second reboot the phone shuts down,
I have noticed that when installing any TGY rom, it shows in RED " FRP mode is enabled... , ignoring pit download "
Some research from the internet say that FRP can be removed with Z3X... but that method doesnt work for me either.
superyacine1994 said:
I installed C5000ZZH1BRE3
Same problem so far,
the installation succeeds but after the second reboot the phone shuts down,
I have noticed that when installing any TGY rom, it shows in RED " FRP mode is enabled... , ignoring pit download "
Some research from the internet say that FRP can be removed with Z3X... but that method doesnt work for me either.
Click to expand...
Click to collapse
Hi once again , try to Wipe Cache partition and also do Factory Reset , before you are doing that make sure that sim card and micro sd is outside .
You said also combination firmware doesn't work but try again with this one :
COMBINATION_CHC_FA60_C5000ZCU1APF3
https://drive.google.com/uc?id=0B8WzibHYkEUYSXdsQklfYzhqb00&export=download
Instructions:
https://combination-files.blogspot.com/2018/01/combination-rom-c5000.html
or try with this one:
https://pakfirmware.com/2018/01/frp-lock-samsungsamsung-c5-sm-c5000-boot-file/
If That doesn't work try to downgrade back to Android 6.0.1 to see if it boots ...
C5000ZHU1AQC5 TGY
http://www.mediafire.com/file/8bjufrz8360lme4/C5000ZHU1AQC5_C5000ZZH1AQC5_TGY.zip
Make sure your battery is full if you are not sure put on charger for about 2 -3 hour ...
Good luck and let me updated . With Respekt brother
Teddy Lo said:
Hi once again , try to Wipe Cache partition and also do Factory Reset , before you are doing that make sure that sim card and micro sd is outside .
You said also combination firmware doesn't work but try again with this one :
COMBINATION_CHC_FA60_C5000ZCU1APF3
https://drive.google.com/uc?id=0B8WzibHYkEUYSXdsQklfYzhqb00&export=download
Instructions:
https://combination-files.blogspot.com/2018/01/combination-rom-c5000.html
or try with this one:
https://pakfirmware.com/2018/01/frp-lock-samsungsamsung-c5-sm-c5000-boot-file/
If That doesn't work try to downgrade back to Android 6.0.1 to see if it boots ...
C5000ZHU1AQC5 TGY
http://www.mediafire.com/file/8bjufrz8360lme4/C5000ZHU1AQC5_C5000ZZH1AQC5_TGY.zip
Make sure your battery is full if you are not sure put on charger for about 2 -3 hour ...
Good luck and let me updated . With Respekt brother
Click to expand...
Click to collapse
I tried to wipe cache + factory reset but nothing.
Flashing COMBINATION_CHC_FA60_C5000ZCU1APF3 now shows two errors ,
"Frp mode enabled , ignoring pit"
"Custom binary blocked ... something aboot " same error it was showing when i was trying to flash a CNY roms instead of TGY.
I am not a phone repair expert i feel like frp needs to be removed first before flashing the stock rom.
And while combinations were supposed to work, none of them did. I tried three of them but none worked. I even downgraded like you suggested but didnt help either.
I appreciate your effort though.
Okay , try now with 4 file repair firmware :
Downlaod link : ( Create free account and use IDM for fast downloading)
https://samsung-firmware.org/ar/download/Galaxy__C5__/2d23/TGY/C5000ZHU1BRA1/C5000ZZH1BRA1/
password:
Password: www.gem-flash.com or windows4droid.
Instructions " How To Flash Galaxy C5 SM-C5000 "
Extract the Firmware By 7z or winrar
Extract Odin ZIP file
Open Odin.exe
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the files to BL - AP - CP - CSC
Make sure re-partition is NOT ticked
Click the start button and you know the rest ...
Let me know if you pass to normal Boot - Setup for first use ...
Hi there.
So the phone's screen is frozen at the startup Samsung M31S powered by android screen.
The phone does boot up and I can use it the touch works but the screen is still showing the first logo.
I have enabled usb debugging using talkback and I can use an app called Vysor on my pc to see the screen
The phone works just fine but the screen is frozen and when the phone goes to sleep or I press the lock/power button
the screen goes black but when I press it again its still black. I have to force restart and it then shows the first logo screen.
Download mode and Recovery work just fine and the screen does show them correctly
but whenever I try to boot it to system its frozen on the first logo. I also installed twrp recovery it works.
Because I unlocked the bootloader instead of frozen Samsung M31S powered by android screen the screen is frozen at
the "your device has unlocked bootloader press power to continue.) The phone boots up fine but the screen is frozen
and goes black when I press lock/power button or leave it to sleep just like normal but it doesn't come back when I press the button again.
I flashed stock rom using ODIN. It has the same issue. Its on android 11 U3 binary. I can't use combination factory binary(I'm getting please get approval to use factory binary(PIT).
I can't tell what the problem is. Screen works and touch but gets frozen before it boots to system, but does work fine in recovery stock or custom(twrp) and download mode.
The main board works too it boots I can use it just fine using my pc to see the screen.
Let me know if you can explain what's going on and what can be done.
EDIT: In the recovery logs I noticed this error as well unable to set property ro.boot time.init.mount.cache so that might be a clue.
Thanks!
Android device can get booted into
Recovery
Fastboot ( AKA Download )
Sideload
EDL
Normal ( read: Android OS )
mode.
My guess is your phone's Android OS completely got corrupted for whatever reason, hence device won't boot into Normal mode
jwoegerbauer said:
Android device can get booted into
Recovery
Fastboot ( AKA Download )
Sideload
EDL
Normal ( read: Android OS )
mode.
My guess is your phone's Android OS completely got corrupted for whatever reason, hence device won't boot into Normal mode
Click to expand...
Click to collapse
The thing is it does boot up I can use it just fine with the pc. Its just the frozen screen. I think its hardware problem. Board or screen or both who knows. All I know is that it worked fine then one day it turned off. It didn't want to turn on. Then using Odin the phone was flashed with stock rom and it behaves like this. Anyway to confirm the faulty part? The warranty cannot be claimed because the front glass has a tiny crack but it worked for 6 months like that...
serifpersia said:
Hi there.
So the phone's screen is frozen at the startup Samsung M31S powered by android screen.
The phone does boot up and I can use it the touch works but the screen is still showing the first logo.
I have enabled usb debugging using talkback and I can use an app called Vysor on my pc to see the screen
The phone works just fine but the screen is frozen and when the phone goes to sleep or I press the lock/power button
the screen goes black but when I press it again its still black. I have to force restart and it then shows the first logo screen.
Download mode and Recovery work just fine and the screen does show them correctly
but whenever I try to boot it to system its frozen on the first logo. I also installed twrp recovery it works.
Because I unlocked the bootloader instead of frozen Samsung M31S powered by android screen the screen is frozen at
the "your device has unlocked bootloader press power to continue.) The phone boots up fine but the screen is frozen
and goes black when I press lock/power button or leave it to sleep just like normal but it doesn't come back when I press the button again.
I flashed stock rom using ODIN. It has the same issue. Its on android 11 U3 binary. I can't use combination factory binary(I'm getting please get approval to use factory binary(PIT).
I can't tell what the problem is. Screen works and touch but gets frozen before it boots to system, but does work fine in recovery stock or custom(twrp) and download mode.
The main board works too it boots I can use it just fine using my pc to see the screen.
Let me know if you can explain what's going on and what can be done.
EDIT: In the recovery logs I noticed this error as well unable to set property ro.boot time.init.mount.cache so that might be a clue.
Thanks!
Click to expand...
Click to collapse
Perform a clean flash, not just selecting BL AP CP CSC. You want to erase older NAND and re partiton it.
Code:
# Disclaimer
#
# I'm not responsible for further damage done to your device
#
# You have been warned
1. In odin selcet fimware tar.md5 file by BL AP CP CSC
2. Go in to PIT tab and extract CSC.tar.md5 fimware file and select .pit file in odin
3. Go in to opitions and make sure that NAND ERASE and re-partition are both on.
You can try to perform a SBL upgrade too.
I don't think it is a hardware releated thing because you said booting in to download, twrp works just fine.
And something else, in the picture you attched where the phone is in download mode. It shows OEM LOCK: ON L. Download mode reports that the bootloader is locked but you get stuck in the logo partition that give you a warning for PBL beeing unlocked?
And you triggered somehow triggerd PERENORMAL MODE?
LAST_krypton said:
Perform a clean flash, not just selecting BL AP CP CSC. You want to erase older NAND and re partiton it.
Code:
# Disclaimer
#
# I'm not responsible for further damage done to your device
#
# You have been warned
1. In odin selcet fimware tar.md5 file by BL AP CP CSC
2. Go in to PIT tab and extract CSC.tar.md5 fimware file and select .pit file in odin
3. Go in to opitions and make sure that NAND ERASE and re-partition are both on.
You can try to perform a SBL upgrade too.
I don't think it is a hardware releated thing because you said booting in to download, twrp works just fine.
Click to expand...
Click to collapse
I followed your steps. The flash went well but the phone's screen is still stuck at the your device's bootloader is unlocked(because I did unlock it, before it was stuck on first M31S powered by android) How do you perform SBL upgrade I don't see that option in ODIN 3.14
LAST_krypton said:
And something else, in the picture you attched where the phone is in download mode. It shows OEM LOCK: ON L. Download mode reports that the bootloader is locked but you get stuck in the logo partition that give you a warning for PBL beeing unlocked?
And you triggered somehow triggerd PERENORMAL MODE?
Click to expand...
Click to collapse
No that was before the FRP lock was on. I was able to unlock it using talkback. Now it says checking and OEM: OFF(U) (because I did a full stock flash it says prenormal bc it performed a factory reset if I finish the setup(enable usb debuging etc) and boot back in download mode it would say checking ofc)
serifpersia said:
I followed your steps. The flash went well but the phone's screen is still stuck at the your device's bootloader is unlocked(because I did unlock it, before it was stuck on first M31S powered by android) How do you perform SBL upgrade I don't see that option in ODIN 3.14
Click to expand...
Click to collapse
You might need to download a older version of odin, or use heimdall.
LAST_krypton said:
You might need to download a older version of odin, or use heimdall.
Click to expand...
Click to collapse
Could this be a battery issue? Download mode and recovery don't use too much current maybe the battery is the problem. I will try accubattery and see the stats. (4.2v 89% charged seems normal) Let me know what else to try. I wlll upload a video for you too see exactly how it works.
serifpersia said:
Could this be a battery issue? Download mode and recovery don't use too much current maybe the battery is the problem. I will try accubattery and see the stats. Let me know what else to try
Click to expand...
Click to collapse
Maybe try T-FLASH mode. And try asking here https://android.stackexchange.com/ there is probably a bigger chance someone will help you there.
LAST_krypton said:
Maybe try T-FLASH mode. And try asking here https://android.stackexchange.com/ there is probably a bigger chance someone will help you there.
Click to expand...
Click to collapse
Thanks. I just don't understand why the screen gets stuck but the phone boots up and works and touch works too. And screen works fine in download/stock recovery/twrp recovery.... but freezes at startup....
LAST_krypton said:
Maybe try T-FLASH mode. And try asking here https://android.stackexchange.com/ there is probably a bigger chance someone will help you there.
Click to expand...
Click to collapse
Do know a way to flash factory binary? I found U3 binary but i get please get approval to use factory binary(PIT). I think it would help as it has different AP and BL...
serifpersia said:
Do know a way to flash factory binary? I found U3 binary but i get please get approval to use factory binary(PIT). I think it would help as it has different AP and BL...
Click to expand...
Click to collapse
Get the fimware you want and do the same method as shown above
LAST_krypton said:
Get the fimware you want and do the same method as shown above
Click to expand...
Click to collapse
Yes but odin fails and the phone download screen says please get approval to use factory binary(PIT) when I give it PIT it says bootloader instead and if I remove the boot.img from it says different .img file they are all protected can't flash...
serifpersia said:
Yes but odin fails and the phone download screen says please get approval to use factory binary(PIT) when I give it PIT it says bootloader instead and if I remove the boot.img from it says different .img file they are all protected can't flash...
Click to expand...
Click to collapse
Are you trying to downgrade SW REV or upgrade. If you are upgradeing you need to set the PIT file in PIT tab. Downgradeing is a differnt thing.
LAST_krypton said:
Are you trying to downgrade SW REV or upgrade. If you are upgradeing you need to set the PIT file in PIT tab. Downgradeing is a differnt thing.
Click to expand...
Click to collapse
No I just want to flash the factory binary firmware to see if it will behave differently. Because the phone's bootloader is on U3 I can only use U3 factory binary so they are both the same. It won't flash because I need token from samsung servers to be able to flash factory binary( they added this security after the S10 launch)
serifpersia said:
No I just want to flash the factory binary firmware to see if it will behave differently. Because the phone's bootloader is on U3 I can only use U3 factory binary so they are both the same. It won't flash because I need token from samsung servers to be able to flash factory binary( they added this security after the S10 launch)
Click to expand...
Click to collapse
Then what have you flashed before.
I've uploaded a YouTube video. I replaced logo.jpg from param.bin with my yellow image to test the colors and as you can see it shows some green, same green as in twrp so ye its the display most likely.
EDIT: After flashing the PrishKernel the screen is stuck but after sleep I can wake up the screen and at the bottom where the navigation buttons are there is some noise type of image the rest of the screen is black. And its responsive if I press power button the bottom part turns on and off.
serifpersia said:
I've uploaded a YouTube video. I replaced logo.jpg from param.bin with my yellow image to test the colors and as you can see it shows some green, same green as in twrp so ye its the display most likely.
EDIT: After flashing the PrishKernel the screen is stuck but after sleep I can wake up the screen and at the bottom where the navigation buttons are there is some noise type of image the rest of the screen is black. And its responsive if I press power button the bottom part turns on and off.
Click to expand...
Click to collapse
Hey serifpersia . Are you able recover your m31s? As my m31s is auto restarting every time , and I also want to change the binary and downgrade the rom. Please help me
Did you solved the problem???