help me flash c5000 - Android Q&A, Help & Troubleshooting

Phone boots up , shows and samsung logo , all in 5-6 seconds, shuts down.
it's Hong Kong version c5000. cant flash china firmware because frp is on and bootloader is locked.
I flashed C5000ZHU1BRA1_C5000ZZH1BRA1_TGY with odin. atfer it shows PASS, phone boots into recovery, shows "erasing......" ... and reboots then same problem.
combinations dont work either , it says frp on , ignoring pit download..
Thanks in advance

superyacine1994 said:
Phone boots up , shows and samsung logo , all in 5-6 seconds, shuts down.
it's Hong Kong version c5000. cant flash china firmware because frp is on and bootloader is locked.
I flashed C5000ZHU1BRA1_C5000ZZH1BRA1_TGY with odin. atfer it shows PASS, phone boots into recovery, shows "erasing......" ... and reboots then same problem.
combinations dont work either , it says frp on , ignoring pit download..
Thanks in advance
Click to expand...
Click to collapse
Hi , download this one :
https://updato.com/firmware-archive-select-model?record=012D128981D811E89F15FA163EE8F90B
You can use IDM - Internet Download Manager or other download manager to speed up your downloading ...
Use Latest Version of Odin :
https://odindownload.com/
Before you are trying to flash please make sure your battery is more than 60 % , is better to be full .
Good luck ....

Teddy Lo said:
Hi , download this one :
https://updato.com/firmware-archive-select-model?record=012D128981D811E89F15FA163EE8F90B
You can use IDM - Internet Download Manager or other download manager to speed up your downloading ...
Use Latest Version of Odin :
https://odindownload.com/
Before you are trying to flash please make sure your battery is more than 60 % , is better to be full .
Good luck ....
Click to expand...
Click to collapse
I installed C5000ZZH1BRE3
Same problem so far,
the installation succeeds but after the second reboot the phone shuts down,
I have noticed that when installing any TGY rom, it shows in RED " FRP mode is enabled... , ignoring pit download "
Some research from the internet say that FRP can be removed with Z3X... but that method doesnt work for me either.

superyacine1994 said:
I installed C5000ZZH1BRE3
Same problem so far,
the installation succeeds but after the second reboot the phone shuts down,
I have noticed that when installing any TGY rom, it shows in RED " FRP mode is enabled... , ignoring pit download "
Some research from the internet say that FRP can be removed with Z3X... but that method doesnt work for me either.
Click to expand...
Click to collapse
Hi once again , try to Wipe Cache partition and also do Factory Reset , before you are doing that make sure that sim card and micro sd is outside .
You said also combination firmware doesn't work but try again with this one :
COMBINATION_CHC_FA60_C5000ZCU1APF3
https://drive.google.com/uc?id=0B8WzibHYkEUYSXdsQklfYzhqb00&export=download
Instructions:
https://combination-files.blogspot.com/2018/01/combination-rom-c5000.html
or try with this one:
https://pakfirmware.com/2018/01/frp-lock-samsungsamsung-c5-sm-c5000-boot-file/
If That doesn't work try to downgrade back to Android 6.0.1 to see if it boots ...
C5000ZHU1AQC5 TGY
http://www.mediafire.com/file/8bjufrz8360lme4/C5000ZHU1AQC5_C5000ZZH1AQC5_TGY.zip
Make sure your battery is full if you are not sure put on charger for about 2 -3 hour ...
Good luck and let me updated . With Respekt brother

Teddy Lo said:
Hi once again , try to Wipe Cache partition and also do Factory Reset , before you are doing that make sure that sim card and micro sd is outside .
You said also combination firmware doesn't work but try again with this one :
COMBINATION_CHC_FA60_C5000ZCU1APF3
https://drive.google.com/uc?id=0B8WzibHYkEUYSXdsQklfYzhqb00&export=download
Instructions:
https://combination-files.blogspot.com/2018/01/combination-rom-c5000.html
or try with this one:
https://pakfirmware.com/2018/01/frp-lock-samsungsamsung-c5-sm-c5000-boot-file/
If That doesn't work try to downgrade back to Android 6.0.1 to see if it boots ...
C5000ZHU1AQC5 TGY
http://www.mediafire.com/file/8bjufrz8360lme4/C5000ZHU1AQC5_C5000ZZH1AQC5_TGY.zip
Make sure your battery is full if you are not sure put on charger for about 2 -3 hour ...
Good luck and let me updated . With Respekt brother
Click to expand...
Click to collapse
I tried to wipe cache + factory reset but nothing.
Flashing COMBINATION_CHC_FA60_C5000ZCU1APF3 now shows two errors ,
"Frp mode enabled , ignoring pit"
"Custom binary blocked ... something aboot " same error it was showing when i was trying to flash a CNY roms instead of TGY.
I am not a phone repair expert i feel like frp needs to be removed first before flashing the stock rom.
And while combinations were supposed to work, none of them did. I tried three of them but none worked. I even downgraded like you suggested but didnt help either.
I appreciate your effort though.

Okay , try now with 4 file repair firmware :
Downlaod link : ( Create free account and use IDM for fast downloading)
https://samsung-firmware.org/ar/download/Galaxy__C5__/2d23/TGY/C5000ZHU1BRA1/C5000ZZH1BRA1/
password:
Password: www.gem-flash.com or windows4droid.
Instructions " How To Flash Galaxy C5 SM-C5000 "
Extract the Firmware By 7z or winrar
Extract Odin ZIP file
Open Odin.exe
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the files to BL - AP - CP - CSC
Make sure re-partition is NOT ticked
Click the start button and you know the rest ...
Let me know if you pass to normal Boot - Setup for first use ...

Related

how to reset an android device when there is not boot screen ?

It is a Samsung Galaxy Mini (GT S5570) , the mobile of my girlfriend, she say she didn't install anything and it suddenly stop working
Now, when start , it apears the samsung screen, and then the galaxy-mini screen, and then it stuck in the samsung loading screen
I presume something on the software got corrupted or similar, so i wish to make a factory reset
VolumenDown + keyOK + Power -> send me to Downloading mode, but nothing goes on
VolumenDown + Power -> do not do a thing ...
can I do something with the phone, or should think into the next phone ??
InTheater said:
It is a Samsung Galaxy Mini (GT S5570) , the mobile of my girlfriend, she say she didn't install anything and it suddenly stop working
Now, when start , it apears the samsung screen, and then the galaxy-mini screen, and then it stuck in the samsung loading screen
I presume something on the software got corrupted or similar, so i wish to make a factory reset
VolumenDown + keyOK + Power -> send me to Downloading mode, but nothing goes on
VolumenDown + Power -> do not do a thing ...
can I do something with the phone, or should think into the next phone ??
Click to expand...
Click to collapse
When you enter download mode do you have your phone connected to your computer through a USB cable and is Odin detecting your phone? If you are able to access download mode you can download the stock firmware for the Galaxy Mini from here and then using Odin which can be downloaded from here, flash the firmware to the device. Let me know if you still have questions .
shimp208 said:
When you enter download mode do you have your phone connected to your computer through a USB cable and is Odin detecting your phone? If you are able to access download mode you can download the stock firmware for the Galaxy Mini from here and then using Odin which can be downloaded from here, flash the firmware to the device. Let me know if you still have questions .
Click to expand...
Click to collapse
Thanks a lot for the response !!!
I download drivers, Odin, and tar.md5 file, great...
but I start Odin with the package I get the "an unnamed file was not found" error, I search and I found that XDA_Galaxy_mini_OPS
Then I add it and it went everything well
Mobile is up and running again, and even I didn't loose all configurations and programs, GREAT !!!
Thanks again !!

[Q] Galaxy S2 Stuck at logo all of a sudden (not rooted)

Hello a couple of days back I had my phone charging over night as usual, however at the morning the phone showed the Samsung Galaxy S2 white text as if the phone was about to boot up but it never did. I have tried removing the battery etc with no luck and I cant get into recovery mode, the only thing I can do is to get into Download Mode.
I have never rooted the phone and it have worked flawless for 2 years.
So I tried to use Odin to flash it with a stock firmware, my phone it not tied to any operator, I have tried 2 different firmwares so far with different versions of Odin and different USB leads with the same result, a ERROR at cache.img, Complete(Write) operation failed.
I have no idea what to do and I´m starting to get worried, what is there left to do :/?
Help will be greatly appreciated!
Read this mate. :thumbup:
http://forum.xda-developers.com/showthread.php?t=2345831
try to boot into recovery mode . plug out the battery and press the combination for recovery mode and then whilst pressing the 3 buttons , ask someone to insert the battery . i hope you'll boot into recovery mode . if not , remove the battery , leave it out overnight and then the next morning , insert the battery and press volume up and power button . it might boot up . otherwise , download latest odin ( if not latest , v 3.07 ) a new galaxy s2 firmware ( say xwlsd ) and flash it via odin . it might just help you . hope i helped and make sure to try out all the methods i mentioned . all the best and hope i helped .
flasherruts said:
try to boot into recovery mode . plug out the battery and press the combination for recovery mode and then whilst pressing the 3 buttons , ask someone to insert the battery . i hope you'll boot into recovery mode . if not , remove the battery , leave it out overnight and then the next morning , insert the battery and press volume up and power button . it might boot up . otherwise , download latest odin ( if not latest , v 3.07 ) a new galaxy s2 firmware ( say xwlsd ) and flash it via odin . it might just help you . hope i helped and make sure to try out all the methods i mentioned . all the best and hope i helped .
Click to expand...
Click to collapse
I have tried to do that with no luck, download mode seems to be the only way.
yes. flash your ( preferred ) stock rom from odin . here are a few links to help you
guide how to flash stock ( in case you did not understand me ) : http://www.ibtimes.co.uk/samsung-galaxys2-i9100-unroot-official-jellybean-firmware-460777
stock roms for i9100 ( jelly bean 4.1.2 ) http://samsung-updates.com/device/?id=GT-I9100
As I wrote Odin is the only way and it is not working, tried multiple different firmwares, PCs and usb leads and I can never get passed the cache.img part where it after some time always comes up with FAILED.

Galaxy ace won't boot to anything

Guys someone plz help. I flashed some random ROM and now the phone won't boot up. It doesn't go to recovery or boot loader. Just keeps on rebooting. I tried all possible combinations but nothing worked.
Plz see the pics attached. Whenever m trying to boot into recovery and boot loader all I see is some screen like broken or something. (Second pic).
Sent from my LG-D802 using XDA Free mobile app
@burninitup, Humm I see where you come from,, Let's run an experiment on your device and see if we can restore it to its former glory .
Technically you did hard bricked your device ( claiming both Recovery and Download mode are not accessible), so your last hope might be USBjig to force your device into Download mode. However in some cases with black /distorted images these instructions might work:
1. Remove your battery for ~1 Minute ( don't make any difference though, just for discharging purposes ).
2. Phone is off, Now try to get into Download mode by pushing (Volume(+) + Volume(-) + Power) simultaneously; ONLY IF phone will turn on ( doesn't matter you have no visuals ), then press volume up;connect your device through USB cable; have your correct Wipe-flash able PDA/CSC/MODEM + boot loader+ pit file at hands ; Re-partition ticked ) .
phone should be detected in "ID:COM" area ( green USB signal), then proceed with your flashing over Odin.
Hope I did help you
burninitup said:
Guys someone plz help. I flashed some random ROM and now the phone won't boot up. It doesn't go to recovery or boot loader. Just keeps on rebooting. I tried all possible combinations but nothing worked.
Plz see the pics attached. Whenever m trying to boot into recovery and boot loader all I see is some screen like broken or something. (Second pic).
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Hi bro,
according to your problem it shows that you have Hard bricked your device you may need to provide it with JTAG service which may revive back your bootloader values then flash it using Odin
Thanks for ur reply but it is running fine now. I don't know what the problem was but i kept it without battery for around whole night and in the morning when i plugged in the battery and try the download mode, it worked and then same with the Odin and stuff. And it's running very well now.
Sent from my LG-D802 using XDA Free mobile app
Same Issue with me also
Thanks All. I have the similar issue. My phone boots again and again (I guess it is in bootloop) with no volume. Please guide me in flashing the phone to any stock/custom ROM and let me know if I have to start a new thread for this issue.
I have followed the procedure on the link: http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-ace-s5830/ and downloaded ODIN 4.38 but the phone is not getting detected in ODIN and it is not getting into download mode by pressing Vol UP + Vol Down + Power keys.
Then, I got a software named Samsung 300K Tool.exe which forces the phone into download mode. It forces the phone to download mode.
I have downloaded samsung drivers from the link: http://www.android.gs/download-samsung-usb-drivers-for-android/
Then, I followed the instructions provided in the following video: https://www.youtube.com/watch?v=ELeDUwa9c34
It is instructed in this video to install Odin3-v1.85 in which phone is getting detected (pic is attached). I followed the whole process in the above video and the result is PASS in green (pic attached) but the result is same. No Improvement.
Please help and guide me to get the phone recovered to any ROM (stock/custom)
Any help will be highly appreciated.
@vijay.gupta, You didn't clarify whether you were on s5830 "i" variation, code name : CooperVe or not ,, I wrote an instruction for status 7 errors on CM11 (post#297) which you can proceed from the line starts with "- We need wipe flash-able zip package,,,," to get out of boot loop.
Get all of the tools from either sources available to you and get to your download mode and do the following instruction in regards of ( PDA/CSC/MODEM) / boot loader/ pit file ( doesn't matter you have no access to E3 stock recovery at the moment for wipe instruction , just put the required files into Odin3 and rest of the story was depicted in clear detail ).
@ ehsanotaku - I have s5830i variant.
i will follow the instructions on the following link by you: http://forum.xda-developers.com/galaxy-ace/s5830i-develop/stock-rom-odin-flashable-firmware-t3002776
and let you know what happens.
vijay.gupta said:
@ ehsanotaku - I have s5830i variant.
i will follow the instructions on the following link by you: http://forum.xda-developers.com/galaxy-ace/s5830i-develop/stock-rom-odin-flashable-firmware-t3002776
and let you know what happens.
Click to expand...
Click to collapse
Thanks it worked!

GT-I9100G won't turn on

hi , I flashed my samsung galaxy s2 gt-i9100g with odin (i used 4 files flash I9100GJPKH8_2.3.5) and after the flash was done the phone was supposed
to restart but it did't ,I tried to press the power botton but nothing happes ,I changed the battary and it's still the same
then i tried to enter the recovery mode and still the same, and finally i tried to enter download mode and the phone turn on
into download mode but there was a zero in the middle of the android man , then i tried to flash it again and it's stuck on x-loader
for about 5 minutes and then it falis ,after that I tried to use one flash file (I9100GJPLPB_I9100GOJPLP7_I9100GXXLPV_HOME.tar)
wich is android 4.0.4 and it's still the same then I tries to use another one flash file (I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar) this time it stuck on cache for about 5 minutes and then it fails.
please help me.
well86 said:
hi , I flashed my samsung galaxy s2 gt-i9100g with odin (i used 4 files flash I9100GJPKH8_2.3.5) and after the flash was done the phone was supposed
to restart but it did't ,I tried to press the power botton but nothing happes ,I changed the battary and it's still the same
then i tried to enter the recovery mode and still the same, and finally i tried to enter download mode and the phone turn on
into download mode but there was a zero in the middle of the android man , then i tried to flash it again and it's stuck on x-loader
for about 5 minutes and then it falis ,after that I tried to use one flash file (I9100GJPLPB_I9100GOJPLP7_I9100GXXLPV_HOME.tar)
wich is android 4.0.4 and it's still the same then I tries to use another one flash file (I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar) this time it stuck on cache for about 5 minutes and then it fails.
please help me.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You'll receive expert advice there.
Good luck!

J7 Prime, FRP Lock, Need Help!

Hello everyone, I am new here, and I want to ask omething, after I turned off my Samung J7 Prime (Trying to restart it), it diddnt restart and says "Custom Binary Blocked by FRP Lock", I have stock rom odin in diffrent versions, i thried them but they fail, I saw in one thread that you need to Reformat your device, but when I am trying, to go to recovery mode, It says Recovery is Not Seandroid Enforcing, I cant use Recovery mode, I tried download mode but its blocked by FRP Lock so I cant use or flash orreformat my device, I hope I dont get ****ed! Please help really need all your help! Thank you, Hope my phone gets fixed!
" It all started when I turned off oem unlock and rebooted m phone"
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
abhinavp649 said:
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
Click to expand...
Click to collapse
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Im sorry but It diddnt work.
Also I cannot access my recovery mode It says RECOVERY IS NOT SEANDROID ENFORCING.
MakiBaka30 said:
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Click to expand...
Click to collapse
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
abhinavp649 said:
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
Click to expand...
Click to collapse
Wait, I will check, but just to make sure what kind of file should a stock rom be?
MakiBaka30 said:
Wait, I will check, but just to make sure what kind of file should a stock rom be?
Click to expand...
Click to collapse
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
abhinavp649 said:
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
Click to expand...
Click to collapse
Ok tnx, I will Check
Hey Its J7 Prime with nnon removable battery ...... Actually I turned off oem lock and restarted the phone with custom rom ........ and its says custom binary blocked by frp lock and when i unbrick using odin ...... it is also not installing ....... in the download mode also displays the same message ...... please bro help me....:crying::crying::crying::crying::crying:
Search for your stock roms here
https://updato.com/firmware-archive-select-model
https://www.sammobile.com/firmwares/

Categories

Resources