hi,
my xiaomi mi pad 1 got hard bricked or whatever happened i could not find out properly in any of the online forums, one thing is that i could not turn the device on nor can i open the bootloader or twrp. All i could do is press the power button or the volume button comination only to see the screen turn on and turn off after 2 seconds I,ve read a few solution for this which involves opening the back cover and short circuting the sd card slot but i want to find any other non invasive method of bringing my tab back from the dead . If anyone could help please sugesst a solution ASAP
Suriya1996 said:
hi,
my xiaomi mi pad 1 got hard bricked or whatever happened i could not find out properly in any of the online forums, one thing is that i could not turn the device on nor can i open the bootloader or twrp. All i could do is press the power button or the volume button comination only to see the screen turn on and turn off after 2 seconds I,ve read a few solution for this which involves opening the back cover and short circuting the sd card slot but i want to find any other non invasive method of bringing my tab back from the dead . If anyone could help please sugesst a solution ASAP
Click to expand...
Click to collapse
Can you see mi logo?
Is the led blinking when connected to charger?
Did u use SuperSU to root your tab ?
Unfortunately If it is a hardbrick then you have to use the short circuit method there's no other option available
Check MIUI forum for tutorial on how to unbrick MiPad , if you face any problem join MiPad telegram group we will help you there ,BEST OF LUCK
Related
Hello
I have a problem with the phone Lenovo k900
It
After downloading the official rom for the phone and install it and reboot
Phone does not work
Black screen
Below are the buttons that light up when I press the power button to shut down within seconds
When connected to the computer to make it also does not work
Is there a solution?
I apologize for the poor quality of the writing because I Arabic:victory:
K_S_A said:
Hello
I have a problem with the phone Lenovo k900
It
After downloading the official rom for the phone and install it and reboot
Phone does not work
Black screen
Below are the buttons that light up when I press the power button to shut down within seconds
When connected to the computer to make it also does not work
Is there a solution?
I apologize for the poor quality of the writing because I Arabic:victory:
Click to expand...
Click to collapse
Basicly....u got bootloop here.
go read the main forum for solution
http://forum.xda-developers.com/lenovo-k900/general/lenovo-k900-discussion-views-google-app-t2256075
pjsplayez said:
Basicly....u got bootloop here.
go read the main forum for solution
http://forum.xda-developers.com/lenovo-k900/general/lenovo-k900-discussion-views-google-app-t2256075
Click to expand...
Click to collapse
Thank you
But there are more than 300 pages Where was looking for?
After searching for how to fix boot loop a lot says remove the battery and the phone can not remove battery
At the origin is not related to the computer
What to do?
K_S_A said:
Thank you
But there are more than 300 pages Where was looking for?
After searching for how to fix boot loop a lot says remove the battery and the phone can not remove battery
At the origin is not related to the computer
What to do?
Click to expand...
Click to collapse
Sorry bro....i also forgot what page is it in the forum.....but i remembered page 200 and forward.....i already facing this problem and solve it by reading whole forum and didnt sleep to solve this....so gudluck searching and finding the solution
K_S_A said:
Hello
I have a problem with the phone Lenovo k900
It
After downloading the official rom for the phone and install it and reboot
Phone does not work
Black screen
Below are the buttons that light up when I press the power button to shut down within seconds
When connected to the computer to make it also does not work
Is there a solution?
I apologize for the poor quality of the writing because I Arabic:victory:
Click to expand...
Click to collapse
sorry to just barge in..but the only way then is MFT ..flash a ROW ROM through MFT and you are good. BTW, were you trying Vibe X ROM? Cause that's what I am about to flash.
Hi guys, I'm new here, so I'm sorry if I'm not doing this properly.
I have Alcatel Flash 2 phone (7049D) and I accidentally hard-bricked it while trying to root my phone. I used this tool called "Smart Phone Flash Tool". I turned my phone off,press the Download button on the software,and then I press Power+Volume Up button on my phone,the Download process on the software showed 64% completion but then it showed Error Message (can't remember what it is), and after that I can't turn my phone on however I tried. I already tried pressing every button for a while (ex : Power button, Power+Volume Up button, etc), still not working. And when I connect it to my laptop, somehow my laptop also can't recognize it,it makes the sound that it connects but it says "Unknown device" on Device Manager with yellow exclamation mark on it. Can anyone please tell me how to fix it? I read some articles that this kind of situation might be the end for my phone,but I just hope that there might still a chance for me to fix it. Hope someone can help me, thx a lot.
You made a hard-brick, let some expert come and answer to your question, For now your phone is in HARD-BRICK and you cannot do anything to it simple.
Salman Al-Badgail said:
You made a hard-brick, let some expert come and answer to your question, For now your phone is in HARD-BRICK and you cannot do anything to it simple.
Click to expand...
Click to collapse
So,my point is,is there any possibility that a hard-brick is repairable? Because I've been going left and right, calling many repair shops, and none of them can repair my phone, simply because it's new, not many people have Alcatel Flash 2. I will in the end bring my phone to Alcatel Service Center of course if there's no other solution, but I'm holding it as a last resort since it's gonna cost more.
The phone cost is around (USD-$132 . 58), go to the service centre they might help you on this,
i have the same problem......just this morning i accidentally installed incompatible rom on my flash 2 and now it wont open ....... my laptop will detect it for about 3 seconds and then nothing........
[email protected] said:
i have the same problem......just this morning i accidentally installed incompatible rom on my flash 2 and now it wont open ....... my laptop will detect it for about 3 seconds and then nothing........
Click to expand...
Click to collapse
Did you solved the problem?
I bricked my Lenovo Yoga Tab 3 (YTS-X50F) this morning.
Trying to flash as ROM to get an update. it said it worked fine, rebooted and well ... I'm here aren't I.
Here is the thing, its somewhere between a soft brick and a hard brick.
If I try to power it down (or force it to turn off) I can hear it go through the motions. It plays the super obnoxious, deafeningly loud start up sound and vibrates. But the screen isn't readable. In some light you can kind of sorta make out the lenovo logo.
At one point I let it go through the motions, I could tell when I tried to swipe to unlock it worked (it vibrated when I did it from the wrong side and chimed when I did it right). I could kinda sort of make out stuff on the screen. but it wasn't in English. It was all as if someone had the screen brightness all the way down.
I know if I press and hold power and Vol+ it should go into Recovery and I could reset to factory etc. I just can't see that screen to do that!
Are there any kind of tools to force that from my computer? If I plug it into my computer and its on, my laptop recognizes its there.
I know I posted in the Lenovo forums, but I wanted to post here in a more general area in case other Android experts have ideas.
Kerivkennedy said:
I bricked my Lenovo Yoga Tab 3 (YTS-X50F) this morning.
Trying to flash as ROM to get an update. it said it worked fine, rebooted and well ... I'm here aren't I.
Here is the thing, its somewhere between a soft brick and a hard brick.
If I try to power it down (or force it to turn off) I can hear it go through the motions. It plays the super obnoxious, deafeningly loud start up sound and vibrates. But the screen isn't readable. In some light you can kind of sorta make out the lenovo logo.
At one point I let it go through the motions, I could tell when I tried to swipe to unlock it worked (it vibrated when I did it from the wrong side and chimed when I did it right). I could kinda sort of make out stuff on the screen. but it wasn't in English. It was all as if someone had the screen brightness all the way down.
I know if I press and hold power and Vol+ it should go into Recovery and I could reset to factory etc. I just can't see that screen to do that!
Are there any kind of tools to force that from my computer? If I plug it into my computer and its on, my laptop recognizes its there.
I know I posted in the Lenovo forums, but I wanted to post here in a more general area in case other Android experts have ideas.
Click to expand...
Click to collapse
Just flash the stock firmware and everything will be fine
Regards milkyway3
yes, I know that. but HOW when you can not see anything on the screen
I know it powers on. but I can't get it to a Recovery screen. The screen is practically black.
milkyway3 said:
Just flash the stock firmware and everything will be fine
Regards milkyway3
Click to expand...
Click to collapse
Kerivkennedy said:
yes, I know that. but HOW when you can not see anything on the screen
I know it powers on. but I can't get it to a Recovery screen. The screen is practically black.
Click to expand...
Click to collapse
You have to flash it through pc not through mobile
Regards milkyway3
Kerivkennedy said:
yes, I know that. but HOW when you can not see anything on the screen
I know it powers on. but I can't get it to a Recovery screen. The screen is practically black.
Click to expand...
Click to collapse
Even once I bricked my lenovo.
For lenovo no recovery needed to fix using pc. Actually while flashing you don't even have to power on your device.
How to Download firmware from here as shown in the video. ( tutorial for downloading firmware. )
https://m.youtube.com/watch?v=QuGOV3uuTY8
And watch this for how to fix your device ( tutorial for fixing )
https://m.youtube.com/watch?v=4FRyDsV83PY
Thank you. Giving this a try. I tried Android Studio but couldn't seem to get it to work - however its a pretty impressive developer tool, that is complicated and has more than I need.
mdmaher said:
Even once I bricked my lenovo.
For lenovo no recovery needed to fix using pc. Actually while flashing you don't even have to power on your device.
How to Download firmware from here as shown in the video. ( tutorial for downloading firmware. )
https://m.youtube.com/watch?v=QuGOV3uuTY8
And watch this for how to fix your device ( tutorial for fixing )
https://m.youtube.com/watch?v=4FRyDsV83PY
Click to expand...
Click to collapse
Hate to pester you but I've been searching on this all day with no luck. I've got Stock frimware downloaded (zip file) and extracted. Yet I can not seem to locate the scatter file required to use the SP Flash tools. Most sites say "includes scatter file" yet no zip file seems to have it included (yes I've tried it more than one place).
mdmaher said:
Even once I bricked my lenovo.
For lenovo no recovery needed to fix using pc. Actually while flashing you don't even have to power on your device.
How to Download firmware from here as shown in the video. ( tutorial for downloading firmware. )
https://m.youtube.com/watch?v=QuGOV3uuTY8
And watch this for how to fix your device ( tutorial for fixing )
https://m.youtube.com/watch?v=4FRyDsV83PY
Click to expand...
Click to collapse
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Use test point mathod it will be back in life easily. Tested myself
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
can you boot to fastboot if yes then flash via fast boot or search for FASTBOOT TO EDL MODE IN guide news section and flash via EDL that might help
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Buy a deepflash cable for 5$ in Aliexpress.
Deep flash https://www.youtube.com/watch?v=uXai6PMmM7s
How to make deep flash cable https://www.youtube.com/watch?v=hmdrj4uX7gY
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
If you're unable to boot to fastboot and edl or the pc shows 9008E, get the deep flash cable from Alixpress. It's cheap and easiest way to recover your phone. This cable works fine.
https://www.aliexpress.com/item/New...rts-all-BL-locks-Engineering/32785943419.html
Or you can make the cable yourself with some Youtube tutorials posted above.
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Wait a bit more and if nothing happens try rebooting to fastboot.
If fastboot is accessible try flashing the latest dev rom.
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Did you flash all partition including storage? If I remember correctly, this shouldn't take more than 10-15 mins to boot up or even less. If it's still stuck, you should select 'flash all including storage' in Mi flash.
Or
Since your phone can boot into fastboot now, I would suggest to unlock it unofficially and flash zcx twrp recovery and than flash the rom through recovery after formatting all data.
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
Just get a permission from xiaome and unlock your device and then flash custom recovery change the rom(sorry for bad english)
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
You lost your IMEI and Modem. Try this -> https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Does the "Radio: OFF" status mean it's being kept forcibly off by the system. i looked for an option to turn it on with no success...
aizen_souske said:
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Click to expand...
Click to collapse
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Yogendra Kher said:
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Click to expand...
Click to collapse
50% error is prety common..bothibg to do with your device..thabkfully i never had such issues..but u can find plenty of youtube videos adressing this issue
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
ebrehemx said:
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Click to expand...
Click to collapse
U did somethibg wrong..u have to use imei fixer and input your own imei given at the back of box..dont.input some random imei..imei spoofing is illegal
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
apriores said:
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
Click to expand...
Click to collapse
No
Hi every former developer, senior brother and all ... i need help about my black shark china version which is no IMEI, unknown baseband , cannot connect to wifi, no sim and freezing sometime. It work fine whole night but suddenly stop working when i woke up and screen on my phone. It show no sim and no network when i unlock my home screen. I try to check my IMEI and show no IMEI. I check baseband version but unknown baseband version and screen freeze sometime.
So i try to repair IMEI and i flash twrp to root it. Everything was fine and i take firmware back up immediately after i flashed twrp. I try to reboot to system. Select language, still no sim card and skip it, no wifi and skip it. After i click skip button it start freezing and cannot turn off this time. I try to press power button about 3 minutes and screen turn off but shark logo from back still lightning. Logo light cannot turn off even i press and hold down power button 5 minutes. I press and hold down all key alternately including shark key on off and logo light turn off when i press and hold down volume down button 1 minute. But unluckly my phone cannotbturn on anymore:crying:. I try to charging but totally no respond. But i saw HS USB QDLOADER port connected to my computer when i plug in to my PC. Can i revive my phone if i flash qcn firmware? If yes, can someone upload qcn firmwar and any file needed to revive my black shark? I already searched on google and almost every site but found nothing about black shark. Please someone help me who known the feeling of losing his precious phone:crying::crying:.
Aung Thu Ko said:
Hi every former developer, senior brother and all ... i need help about my black shark china version which is no IMEI, unknown baseband , cannot connect to wifi, no sim and freezing sometime. It work fine whole night but suddenly stop working when i woke up and screen on my phone. It show no sim and no network when i unlock my home screen. I try to check my IMEI and show no IMEI. I check baseband version but unknown baseband version and screen freeze sometime.
So i try to repair IMEI and i flash twrp to root it. Everything was fine and i take firmware back up immediately after i flashed twrp. I try to reboot to system. Select language, still no sim card and skip it, no wifi and skip it. After i click skip button it start freezing and cannot turn off this time. I try to press power button about 3 minutes and screen turn off but shark logo from back still lightning. Logo light cannot turn off even i press and hold down power button 5 minutes. I press and hold down all key alternately including shark key on off and logo light turn off when i press and hold down volume down button 1 minute. But unluckly my phone cannotbturn on anymore:crying:. I try to charging but totally no respond. But i saw HS USB QDLOADER port connected to my computer when i plug in to my PC. Can i revive my phone if i flash qcn firmware? If yes, can someone upload qcn firmwar and any file needed to revive my black shark? I already searched on google and almost every site but found nothing about black shark. Please someone help me who known the feeling of losing his precious phone:crying::crying:.
Click to expand...
Click to collapse
Hello! Do you happen to find a solution to the problem? Faced the same as you!
Friedrich_Schultz said:
Hello! Do you happen to find a solution to the problem? Faced the same as you!
Click to expand...
Click to collapse
u problem like me...me too black shark 3 chinese version no emei and unknown baseband
i want to try use lineage os custom rom but i dunno which one to download and dunno where to download
hi all, just happen to me after 2 years of usage, already give up and after searching almost 2 week i just found this site below..
BlackShark 3 Global Firmware | Lastest - FirmwareX
BlackShark 3 Global Stable Firmware. Download the latest official firmware for BlackShark 3. Updated from Xiaomi. Operating system optimization, hang logo fix , bootloop fix and unbrick,… Global Beta ROM for Black Shark 3. You can flash with TWRP after unlock bootloader Download firmware for...
firmwarex.net
im afraid its not the exact firmware that i looking for. Im not trying yet but will study more before flashing. hope will works.