I bought the ADAM elements CASA H01 USB Type-C to HDMI Adapter Gold, I tried connecting HDMI to my S8, S8 says HDMI connected but the TV has no response. I am sure the TV works with HDMI as I tested my XBOX on it. Is there anyway to make it work? Or is my adapter broken?
you can try things like switching the tv off/on and the phone off/on whilst its connected. sometimes, not often, that will help
it sounds like hdmi handshake issues. basically a compatibility problem between the phone and the tv.
Thank you for the suggestion, I tried but still doesn't work. If it's a problem between the phone and tv, should I try the adapter on other tv?
I used Choetech USB C to HDMI 60HZ cable to my S8. Everything worked well. https://www.amazon.com/CHOETECH-Thunderbolt-Compatible-MacBook-ChromeBook/dp/B06XP9NV4G/ref=sr_1_5?ie=UTF8&qid=1495422430&sr=8-5&keywords=choetech+HDMI
I had some HDCP issues when I tried connecting my S8 to a capture device, but that was due to a poor quality cable.
Make sure your device can read the HDMI signal coming from the phone too. It appears to send 1080p or higher, so if your device only understands 720p (some smaller TVs are like this) it might not be able to see the signal from your phone.
I'm having same issue hubbies works mine won't same cord and tv???
Any idea what's going on I just factory reset my phone and still doesn't work
I just got an hdmi to USB c adapter today as well and I first connected it it did not recognize my phone either. The thing that seamed to do the trick was attaching the adapter to my phone first without the hdmi or power cord, then powercord then connecting the hdmi cord and all works well
still not repaired
4 repair invoices 3 months and still not repaired currently on hold with Samsung .... i'm not impressed as this feature was a huge decision for buying the S8+
i use baseus usb-c to hdmi cable - all work good (but no dex)
I have tried two different usb-c to HDMI cable adapters and can't get neither of them to work. Any ideas thanks
Broken and need help
I have a Ugreen Adapter for usb-c to HDMI cable, it worked very well
On several tvs, it WAS working here in Mexico on my ATVIO tv, then I did some phone cleanup and it STOPPED, is there a special application or setting that I've uninstalled????, I'm lost without YouTube on my tv LOL , cant find info anywhere and I swear I installed something on my phone to get it working like 7 months ago in Dallas LOL
biggest thing iv found with EVERY usb type C connectivity issue, POCKET LINT. its as simple as using a sewing needle or safety pin to CAREFULLY take the pocket lint out of the type C port on your device, there are 30 individual pins in there, and they ALL need to make a good connection to your adapter. brand does not matter, if it works with phone A phone B will figure it out (unless your phone simply doesnt support mhl adapters)
Same problem - Galaxy S8+ with Choetech USB-C to HDMI adapter. Worked a couple of months ago not working now. Wife's phone (exactly the same) work a with adapter and HDMI cable. Cleaned, powered on/off, reset phone, nothing works. So frustrating. Any ideas?
I was using my S8+ with my TV. After a couple updates ( prior to Pie) no longer worked. Please don't suggest turning things on / off or factory reset.... The cord is fine. My phone just now updated to Pie, I thought great, maybe it will work again..... nope... I've contacted Samsung, same BS runaround. Samsung - must be a compatibility issue, Me - it was working, Samsung - must be the cord, buy a new one, Me - already did, tried two different brands, Samsung - was one of them Samsung, Me - ......., Samsung - try factory reset, Me -....... by this time I know I'm screwed. There WAS something to do with an update. (And yes prior to the Pie update I did a factory re-set with no results). From the comments on this post appears no one has a solution....
Related
Picked up the mhl converter at a T-Mobile shop, grabbed 6' of hdmi cable, hooked up the phone to my newest tv, and "no signal" bounced all over the screen.
Mocking me.
Hdmi 1
Hdmi 2
Hdmi 3
Nope, zippo.
Dead USB? No, the USB>TV worked for pictures and file browsing.
Faulty MHL adapter? No way of knowing.
Dead HDMI TV inputs? All 3 on a 2 week old tv? Possible.
I called technical, and they were stumped as well.
I have 2 units, and neither worked.
Am I missing something?
Operator error is not unfamiliar to me.
Thank you.
Plug the mhl to power and tv first. Plug the phone last
Double0EK said:
Plug the mhl to power and tv first. Plug the phone last
Click to expand...
Click to collapse
Tried it, no luck.
I tested mine out to see if I could re-create a no signal and the olny way I did was when I set the signal to HDMI on the tv first, then plugged in the mhl. I guess it needs to have that signal there first to pick it up. Anything else I tried, different configurations of plugging in worked.
Does your mhl have a micro usb plug to charge as well as the hdmi plug? I have a generic one off ebay that has the short micro usb pigtail for plugging in your wall charger into the mhl and also a short pigtail for the hdmi plug. I have read a couple people were having problems with the one that's hdmi out only
Well, I solved the first problem.
Thank you everyone that assisted.
Now my only problem is that I paid real money for the kit.
I do not advise purchasing.
The output is horrendous.
I tried my vids/pics, youtube...no netflix yet...everything was pixelrama.
It should have raised flags that not only tmo tech, but 3 stores in the area are completely unfamiliar due to nobody buying them or trying them personally.
ive had my MHL cable for over 2 weeks now and its got the official samsung logo - and i got it from suntekstore... only problem is i havent got it working...
ive tried with my dads stock 2.3 i9100 on a viewsonic monitor and samsung tv
same with my 4.0.4 i9100 resurrection remix 1.7 + siyah 3.1.2
the other two items i got from suntekstore were 2 OTG adaptors which fail to work... (i also have one that does work from another store) so i think it might be the MHL adaptor itself
yesterday i was frustrated and kept plugging my phone in and out of the samsung tv.... and BAM i got a visual =S after like 10 'no signal' and 2 resolution not supported... but the screen was stuck in portrait... thats the closest ive come to using MHL properly!
on top of that... when i use OTG keyboard connection... the phone freezes if i try pressing caps lock to check for power on my phone! any one else running same OS version and its working?
When successfully connected via MHL the S2 will display in portrait, so that was normal. Apps that run in landscape will do so when run, or where sensor orientation works, like in photo gallery etc, you can rotate it to landscape yourself.
No, as for your issues regarding getting the picture to stay on; first, you did have the Samsung Charger plugged into the MHL cable right, and the correct output channel selected on your tv?
Assuming you did for both the above, the problem is likely with your hdmi cable, not the tv's. Have you tried using different cables? I have a problem with one of my hdmi cables where the screen goes black for a few seconds whenever it pleases, with another cable (which comes with the sky box), it stays on all the time. So try changing cables and see what kind of response you get.
Also, some users have mentioned that they seem to get picture when they put their phones into flight mode first, I've never needed to do this, but give it a go and see what happens. Once you've got your picture up, you can use your tv's remote the control your S2, assumming your tv supports that function.
Hope that helps
I have not tried that rom but last I heard any source based rom doesn't have a working MHL output. I don't know the status at all of OTG on source based roms.
You said you tried it on your dads stock phone but didn't clearly state if it worked or not which it should if the phone is stock. So use that as a basis of if the adaptor is broken.
thanks guys - yeah it could be the hdmi cable... they are pretty cheapo - but on seeing 2 OTG adapters from the same store dont work... the MHL being broken cant really be a coincidence? it was in delivery for over 1 month =[ maybe someone broked it! lol
I think in the end it was the MHL adaptor... ive got a replacement sent out as now the phone wont even recognise power to charge when plugged into the mhl however the charger directly into the phone works! argh may be a long wait for the replacement took 30 days to get my other shipment! may have to resort to a more expensive one
Hi, I was hoping someone could help me please.
I recently purchased Samsung's smart dock to use with my note 3. It goes into dock mode when i sit the phone in the dock and i can control the phone using a wireless keyboard and mouse so the dock seems to be working as it should. Ive tried 2 hdmi cables on all 3 sockets on my panasonic viesa tv. I just cant get a picture on the tv.
I have tried all the obvious reboots, checking connections etc.
I can't see what the fault may be and I don't have another screen with hdmi input to test it with.
any advice would be appreciated.
Thanks
Did you plug in your power supply?
Yeah, plugged into power socket using all official Samsung cables plugs etc. It's driving me mad. I'm going to try it on a friends TV tonight. Hopefully it's just a compatability issue with my TV. But I use the hdmi inputs with other several other things as well without problems.
my note 3 is rooted on a tw rom.
So I tried a Samsung brand TV. Still no picture, so I installed stock firmware and tried again. Still nothing, so I guess I have a faulty smart dock or I have damaged my port on my phone. (It charges and transfers data fine without any problems).
I shall be exchanging the dock, but if that does not sort it I guess it's the port. If it's the port then I've voided my warranty by setting knox to 0x1.
Does anyone know how I would be able to test it, because it doesn't seem damaged to me.
I purchased the Amazon Basics micro HDMI cable (http://www.amazon.com/AmazonBasics-High-Speed-Mini-HDMI-Cable-Ethernet/dp/B003ES5ZR8/ref=sr_1_1?ie=UTF8&qid=1419968500&sr=8-1&keywords=mini+hdmi) and I've been having issues with poor or no connection. The first time I connected the tablet everything was great. I played about an hour of Portal with no issue. I had to reboot the tablet, and after that I couldn't get a signal. I tried the HDMI cable in my Canon 70d and had no signal. I assumed that the cord was bad, but last night I tried again and got a good signal for about ten minutes. I had to change the source on the TV and when I went back to the original input, my signal was gone. Has anyone else experienced this with the Amazon HDMI cable or any other HDMI cable? What are some good low-cost HDMI cables that others have had success with?
Ive used this adapter a few times without issue. http://www.amazon.com/gp/product/B00IZYIYX8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 .. If the cable is giving you an issue with multiple devices can it be the TV?
joeycent said:
Ive used this adapter a few times without issue. http://www.amazon.com/gp/product/B00IZYIYX8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 .. If the cable is giving you an issue with multiple devices can it be the TV?
Click to expand...
Click to collapse
I plugged the cable into all of the HDMI ports on the TV and one on my Sony receiver. It seems to react the same way with both devices. But that adapted you linked looks pretty slick.
Sounds more like a bad cable than anything else. If you replace the cable and it continues then the shield would be the next more likely culprit. I haven't heard of this happening to anyone else, though.
Hi!
Background:
I'm an esport producer and after some nightmare productions I'm really excited about the rog phone as it seams to be the only phone that have the features needed to make it into a good esports phone (e.g. Having 8-10 players competing in from of an audience), mainly: Hdmi output, ethernet capabilities and usb-c ports on the side..
Problem: After first successfully testing out Hdmi + ethernet connection I wanted to try if I could use the fan accessory and still be able to get the Hdmi signal from it.. When I connected the fan it told me to update the fan firmware so I did, but after that I'm not able to get Hdmi signal either with or without the fan accessory.. For instance, when I plug in my portable asus laptop monitor (power and signal from usb-c) the monitor starts to boot up and then dies.. Then tries again and dies and so on.. On my Samsung s8 it works fine.. So I'm guessing the firmware limits the power that the phone can output on the usb-c port.
Question, has anyone else experienced this issue? Is there a way to uninstall the fan firmware update (that obviously did not only affect the fan but the phone as well). The Hdmi adapter I used was something very similar to the professional dock but is actually an usb-c dock ment for laptops..
Tl:dr; hdmi doesn't work after "fan firmware update", plez halp.
Best regards
Ludvig Fjell
Qruxel E-sports Studio
Just a small update,
I was able to get it to work if I disconnect the power cable from the USB-C dongle and then connect it again.. and sometimes it also requires me to disconnect the HDMI + reconnecting that as well.. so I'm not sure if this actually was due to the fan firmware or just a result of a... weird bug(?) when it comes to the OTG features of the phone.. because connecting the dongle with both HDMI + power already plugged in does not work.
Anyway, just wanted you guys to know that it does work, just need to randomly connect/disconnect cables from the dongle first =)
Best regards,
Which USB-C to HDMI adapter were you using? I am looking for one that works with this device, aside from the fairly costly pro dock.