Fingerprint not working in any MIUI rom - Xiaomi Redmi Note 4 Questions & Answers

So I've been using RR and other custom roms .
Before having this device I had an xperia and I'm quite familiar with ROMs.
So after using RR for a while I decided to go back to stock ROM .
I flashed ROM via twrp .I wiped data ,cache,system, and flashed the ROM and rebooted .
The fingerprint didn't work.. Every time I tried to set up fingerprint it said "couldn't add fingerprint try again"
In custom ROMs fingerprint sensor is working fine.
So my question is am I doing something wrong?
I've tried global , global beta, China beta and stable.
Thank you!

IronHydeFeLix said:
So I've been using RR and other custom roms .
Before having this device I had an xperia and I'm quite familiar with ROMs.
So after using RR for a while I decided to go back to stock ROM .
I flashed ROM via twrp .I wiped data ,cache,system, and flashed the ROM and rebooted .
The fingerprint didn't work.. Every time I tried to set up fingerprint it said "couldn't add fingerprint try again"
In custom ROMs fingerprint sensor is working fine.
So my question is am I doing something wrong?
I've tried global , global beta, China beta and stable.
Thank you!
Click to expand...
Click to collapse
Try flashing via fastboot method, and select option' wipe user data'.

You could try deleting these files if your device is rooted.
/data/system/users/0/fpdata/user.db
/data/system/users/0/settings_fingerprint.xml
Deleting that fixed my fingerprint issues partially, like I could add atleast 3 after that

How many employees can i load on the miui divice?

[email protected] said:
How many employees can i load on the miui divice?
Click to expand...
Click to collapse
Employees????
I didn't get it.

sachin n said:
Employees????
I didn't get it.
Click to expand...
Click to collapse
I think he is asking how many users can be added

Boomshiva said:
I think he is asking how many users can be added
Click to expand...
Click to collapse
Oh I see. Thanks for the clarification. And I've no idea as I didn't tried MIUI. It's probably 6 users I guess. Not sure.
Sent from Mido using Tapatalk

Use the miflash tool to flash stock ROM, it restores all partitions to factory state. Twrp can't do that.

Fingerprint scanner issues
Good evening to all, I've a problem with fingerprint scanner that I'm not able to solve.
My Redmi Note 4 went in bootloop after that I've flashed TWRP. I reflash MIUI with TWRP and then the fingerprint scanner start to go bad: it recognizes all my fingers but not my right index.
I've followed a guide that I've founded on YouTube for fix that issue. It said to delete some system files, I've deleted them but after this the fingerprint scanner has stopped working at all.
I've tried everything: I've reflashed MIUI with MiFlash, I've relocked the bootloader, I've tried to flash more than one MIUI versions with TWRP, I've tried to flash Resurrection Remix but no one of these things have solved my problem. The fingerprint scanner still doesn't work and I don't know what else do.
Please help me, I've bought this phone about two months ago :'(
Thank you in advance

TheRealChimmi said:
Good evening to all, I've a problem with fingerprint scanner that I'm not able to solve.
My Redmi Note 4 went in bootloop after that I've flashed TWRP. I reflash MIUI with TWRP and then the fingerprint scanner start to go bad: it recognizes all my fingers but not my right index.
I've followed a guide that I've founded on YouTube for fix that issue. It said to delete some system files, I've deleted them but after this the fingerprint scanner has stopped working at all.
I've tried everything: I've reflashed MIUI with MiFlash, I've relocked the bootloader, I've tried to flash more than one MIUI versions with TWRP, I've tried to flash Resurrection Remix but no one of these things have solved my problem. The fingerprint scanner still doesn't work and I don't know what else do.
Please help me, I've bought this phone about two months ago :'(
Thank you in advance
Click to expand...
Click to collapse
Which files did you delete?
Sent from my Redmi Note 4 using Tapatalk

nilanko said:
Which files did you delete?
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
I've deleted the folder named "0_0" in persist/data/gxfp

TheRealChimmi said:
I've deleted the folder named "0_0" in persist/data/gxfp
Click to expand...
Click to collapse
Well, none of the MIUI stock ROM flashing methods flashes the persist partition. There's a persist.img in the stock ROM folder but if you try flashing it using "fastboot flash persist persist.img", it fails. You need to find a way to flash the persist.img.
Anyway, I'm giving you the 0_0 folder from my system.
Extract it and copy the folder to data/gfxp on persist.
Set the permissions of the folder to 700
Set the permissions of all the files inside the folder to 700 as well.
Owner and group for folder and its contents should be "system"
http://cloud.tapatalk.com/s/59ff86fde5534/0_0.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi Note 4 using Tapatalk

nilanko said:
Which files did you delete?
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
nilanko said:
Well, none of the MIUI stock ROM flashing methods flashes the persist partition. There's a persist.img in the stock ROM folder but if you try flashing it using "fastboot flash persist persist.img", it fails. You need to find a way to flash the persist.img.
Anyway, I'm giving you the 0_0 folder from my system.
Extract it and copy the folder to data/gfxp on persist.
Set the permissions of the folder to 700
Set the permissions of all the files inside the folder to 700 as well.
Owner and group for folder and its contents should be "system"
http://cloud.tapatalk.com/s/59ff86fde5534/0_0.zip
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Thank you very much, I've solved the problem! Now the fingerprint scanner works, but it still doesn't recognize my right index. I add the fingerprint but it doesn't unlock the phone. What can I do?

TheRealChimmi said:
Thank you very much, I've solved the problem! Now the fingerprint scanner works, but it still doesn't recognize my right index. I add the fingerprint but it doesn't unlock the phone. What can I do?
Click to expand...
Click to collapse
Did you copy my files or did you manage to flash the persist partition?
And if all other fingers work, I guess something's wrong with your right index finger which the reader can't accept.
Sent from my Redmi Note 4X using Tapatalk

nilanko said:
Did you copy my files or did you manage to flash the persist partition?
And if all other fingers work, I guess something's wrong with your right index finger which the reader can't accept.
Sent from my Redmi Note 4X using Tapatalk
Click to expand...
Click to collapse
I had done a copy of the folder before deleting it. When I've seen that the fingerprint scanner doesn't work at all, I've immediately replace the folder to persist/data/gfxp but I didn't know how to set permissions.
My right index isn't recognized after that the phone has been in bootloop. I've seen that's a "common" problem of this phone. I've tried deleting the files with .key extension and the files named "locksettings" in data/system like I found on a thread in this site but nothing happened.

fingerprint not working
in fastboot flashing not done error bootloader locked i am trying to unlock bootloader but not succed...

TheRealChimmi said:
I had done a copy of the folder before deleting it. When I've seen that the fingerprint scanner doesn't work at all, I've immediately replace the folder to persist/data/gfxp but I didn't know how to set permissions.
My right index isn't recognized after that the phone has been in bootloop. I've seen that's a "common" problem of this phone. I've tried deleting the files with .key extension and the files named "locksettings" in data/system like I found on a thread in this site but nothing happened.
Click to expand...
Click to collapse
All the fingerprint data is saved on data partition as far as I know. Once it's wiped, system won't remember the fingerprint data. Try a full wipe from twrp. Also format data (you'll lose everything on internal).
Sent from my Redmi Note 4X using Tapatalk

IronHydeFeLix said:
So I've been using RR and other custom roms .
Before having this device I had an xperia and I'm quite familiar with ROMs.
So after using RR for a while I decided to go back to stock ROM .
I flashed ROM via twrp .I wiped data ,cache,system, and flashed the ROM and rebooted .
The fingerprint didn't work.. Every time I tried to set up fingerprint it said "couldn't add fingerprint try again"
In custom ROMs fingerprint sensor is working fine.
So my question is am I doing something wrong?
I've tried global , global beta, China beta and stable.
Thank you!
Click to expand...
Click to collapse
Flash miui ROM via fastboot once it'll work properly

Plz send me 0_0 file I'm also facing same problem above link not working

Related

SOS: Help a Noob stuck at Samsung screen upon attempt to root

Hello,
Could you pls help a noob with a rooting problem? I attempted to root my ICS AT&T Galaxy Note i-717 using Odin3 v 1.85 and a pda.tar file. Prior to that, I had checked and confirmed the USB drivers are installed (I have Kies software installed on the PC. However, folliwing the succesful flash of pda.tar I got the phone stuck at the Samsung screen. I could still get to the download screen. However, the phone would not go pass that screen. Can you pls tell me what I did wrong/guide me w simple steps on how to fix the phone and finish the root? I have the read many different root treads but I find them confusing. Treads are ponting at different files to be frashed/installed on the phone. Thanks very much.
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
re:
rangercaptain said:
This happens from time to time...don't worry.
Reboot phone in download mode, connect phone, reflash kernel.
A few things: use stock samsung cable. Use back of computer usb port. Reboot computer before you try again. Re download the kernel to be sure your file is not corrupted. Make sure phone battery is more than 80%.
Click to expand...
Click to collapse
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
ptanev said:
Rangercaptain,
Thanks very much. Where can I get the kernel from and which one/which file do I need to flash? Also, how do I flash it? Do I use Odin or another method? Again Thanks a lot!
Click to expand...
Click to collapse
Follow the part one instructions in the first post. Read twice click once. Take your time.
http://forum.xda-developers.com/showthread.php?p=24539068
Make sire lies is closed
Sent from my SAMSUNG-SGH-I717 using xda premium
Nolenm04 said:
Make sire lies is closed
Click to expand...
Click to collapse
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Problem solved
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
All,
Thanks very much for your help! I fugured it out and am now up and running!
I ended up flashing rooted Stock ICS ROM from FJ!
Thanks very much to all of you and FJ!
rangercaptain said:
Make sure Kies is closed
Yes, good suggestion. I would reboot the computer, put the phone in download, open Odin3, then plug in phone.
All that is well explained in the thread.
Click to expand...
Click to collapse
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Nolenm04 said:
Oh snap lol just noticed I misspelled half of that oops
Sent from my SGH-I717 using xda premium
Click to expand...
Click to collapse
I liked it....:laugh:.....:good:
I thought it was drunk-xda-ing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
:laugh:
rangercaptain said:
I thought it was drunk-xda-ing.
Click to expand...
Click to collapse
Lol
View attachment 1291558
Sent from A Closet @ Arkham Asylum on my GNote using Forum Runner, Black ★.
Stuck at Samsung
I have the same issue tho have tried troubleshooting and could really use some extra help.
Updated to ATT stock ICS update a few months ago. Everything workin fine.
Wanted to root it so I could back everything up not to lose anything when moving to JB.
Rooted by flashing Da_G's pda.tar, reboot, and then flashed 2.3.3.0 TWRP
Noticed it was stuck at Samsung.
Here's where I'm kickin myself because I should have backed it up before all this, but I waited because I figured root doesn't wipe data!
Entered TWRP, backed up.
Now what I've tried to fix it... and failed
1. Reflashed pda.tar about 5 times
2. Found a stock pda "pda-odin-att-stock.tar", flashed (fixed) but it's stock setup and contacts and other google services don't work, lost homescreen icon placement and all other settings.
3. TWRP: Restore all = stuck at Samsung again
4. Repeat 2 and Restore only System
5. Repeat 2 and Restore only Data
6. Repeat 2 and flash pda.tar = boots, but same thing with it all stock, so I restore and it's stuck again.
It's my wife's phone and she has contacts that aren't saved in Google, to-do lists saved in app data files, and to be honest, she said everything better be exactly the same after updating (which I promised it would be since the plan was to root, backup, update, and restore), so I'm kinda trying to save my hide. PLEASE HELP me save my ass ha!
Other things to note: I just rooted a new phone about 30mins prior with the exact same root and TWRP files and it went very smooth, no issues.
Using a Samsung original cable on a laptop. Phone Battery was ~30% when I did all the steps, but since then read that battery should be higher so swapped out to fully charged battery and retried the steps.
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
gregsarg said:
Using the root kernel you did, basically flashed a Gingerbread kernel over an ICS rom. (Doesn't work)
Your best bet at this point, is too flash a rooted ICS build from bigfau ...(located in the super thread stock section)
Just flash using TWRP ....BUT !!!
make sure you wipe the dalvik cache, system cache, and system before flashing the rooted ICS build.
Once the rom is flashed, you will be stock and rooted.
Regarding data you have lost with no backup....start begging forgiveness now ....it's gone ....g
Click to expand...
Click to collapse
Wouldn't I be able to just flash an ICS Kernel to undo the GB kernel and set things straight? Or is the whole thing ruined already?
I have the data/app and data/data files. If all's really lost, I'll just put JB on it. If I copy the data/app and data/data files onto the new image will all the apps with their settings/data be restored at least?
Yes, flash the correct kernel.
I think what happened to me is the OS got deleted cuz once I flashed a rom I was good to go!

Wrong information in the 'About phone' panel

This is my first post, so I apologize if I am in the wrong section, but I really need help.
After running diferent custom roms on my KIW-L21, I saw the official MM update on the forum, so I restored my TWRP backup of B140 and tried updating but with no luck, so I tried restoring stock B130. Because the force update wouldn't work I flashed the files manually using adb and fastboot and succeded. The problem is that now, when I go to the 'about phone' panel all the informations except for the version number are wrong :
model is unknown
CPU shows quad core 1,2 GHz
RAM 1,0 GB
Memory 4,0 GB
Resolution 540 x 960
Android version 4.3.
Has anyone encountered anything like this?
Once again, I am very sorry if I posted this in the wrong section, but I could really use some help.
cosminvr27 said:
This is my first post, so I apologize if I am in the wrong section, but I really need help.
After running diferent custom roms on my KIW-L21, I saw the official MM update on the forum, so I restored my TWRP backup of B140 and tried updating but with no luck, so I tried restoring stock B130. Because the force update wouldn't work I flashed the files manually using adb and fastboot and succeded. The problem is that now, when I go to the 'about phone' panel all the informations except for the version number are wrong :
model is unknown
CPU shows quad core 1,2 GHz
RAM 1,0 GB
Memory 4,0 GB
Resolution 540 x 960
Android version 4.3.
Has anyone encountered anything like this?
Once again, I am very sorry if I posted this in the wrong section, but I could really use some help.
Click to expand...
Click to collapse
you need this > http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
clsA said:
you need this > http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
Click to expand...
Click to collapse
I already tried that, but at the start of the installation it gives me 'system file instalation failed'.
cosminvr27 said:
I already tried that, but at the start of the installation it gives me 'system file instalation failed'.
Click to expand...
Click to collapse
yeah well where did you get the files you flashed with fastboot ?
use the Huawei Update Extractor and get the files from the link i posted
clsA said:
yeah well where did you get the files you flashed with fastboot ?
use the Huawei Update Extractor and get the files from the link i posted
Click to expand...
Click to collapse
Will try, but after the extraction wich files should I flash?
On a post I saw it said that I should flash only cust, system, recovery and boot.
Is it necesary to flash all the files from the update?
cosminvr27 said:
Will try, but after the extraction wich files should I flash?
On a post I saw it said that I should flash only cust, system, recovery and boot.
Is it necesary to flash all the files from the update?
Click to expand...
Click to collapse
System and data
You may also need cust from paulobrian rom
Sent from my SM-N920C using Tapatalk
clsA said:
System and data
You may also need cust from paulobrian rom
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
I managed to flash a stock rom using gopinaidu77's [RoM][StOcK][Kiw-L22/L21]B140.Debloated, because it is the only one I found that is stock but .zip file.
The only question now, if you can help me with an answer, is what could go wrong if in the 'about phone' panel model number is MSM8916 for arm64 and the file version is kiw-l24c567b140.
I mean, taking to consideration that my phone is KIW-L21 and the original file version it was originally for KIW-L24.
Anyway I really apreciate the help.
cosminvr27 said:
I managed to flash a stock rom using gopinaidu77's [RoM][StOcK][Kiw-L22/L21]B140.Debloated, because it is the only one I found that is stock but .zip file.
The only question now, if you can help me with an answer, is what could go wrong if in the 'about phone' panel model number is MSM8916 for arm64 and the file version is kiw-l24c567b140.
I mean, taking to consideration that my phone is KIW-L21 and the original file version it was originally for KIW-L24.
Anyway I really apreciate the help.
Click to expand...
Click to collapse
this rom contains the /cust partition you need
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
after flashing it with TWRP
Flash stock recovery with TWRP / Install / Install Image >> https://www.androidfilehost.com/?w=files&flid=51004
when you are done leave twrp with power off
now with the update.app files in the sdcard/dload boot the phone with
Power+ vol+ and vol-
EMUI will flash the phone
if you want complete stock boot to stock recovery (power + volume up) and choose factory reset
cosminvr27 said:
I managed to flash a stock rom using gopinaidu77's [RoM][StOcK][Kiw-L22/L21]B140.Debloated, because it is the only one I found that is stock but .zip file.
The only question now, if you can help me with an answer, is what could go wrong if in the 'about phone' panel model number is MSM8916 for arm64 and the file version is kiw-l24c567b140.
I mean, taking to consideration that my phone is KIW-L21 and the original file version it was originally for KIW-L24.
Anyway I really apreciate the help.
Click to expand...
Click to collapse
Download twrp backup for KIW-L21C432B130 from here and restore using twrp
After restoring backup flash stock recovery before booting into system then update as normal through OTA to B140 firmware
https://r.tapatalk.com/shareLink?ur...share_tid=3328288&share_fid=3793&share_type=t
[Repository] The Honor 5x File Depot
Sent from my KIW-L21 using Tapatalk
chubby65 said:
Download twrp backup for KIW-L21C432B130 from here and restore using twrp
After restoring backup flash stock recovery before booting into system then update as normal through OTA to B140 firmware
https://r.tapatalk.com/shareLink?ur...share_tid=3328288&share_fid=3793&share_type=t
[Repository] The Honor 5x File Depot
Click to expand...
Click to collapse
I am sorry guys,it didn't work.
Tried everything but it seems that the only rom working is the one I mentiones above.
Thank you very much,both of You,though,but for now I guess I'll stock to this one.
The only question now remains how will the fact that it show 'KIW-L24' will afect future updates ?
cosminvr27 said:
I am sorry guys,it didn't work.
Tried everything but it seems that the only rom working is the one I mentiones above.
Thank you very much,both of You,though,but for now I guess I'll stock to this one.
The only question now remains how will the fact that it show 'KIW-L24' will afect future updates ?
Click to expand...
Click to collapse
Did you extract the backup from the zip
Sent from my KIW-L21 using Tapatalk
chubby65 said:
Did you extract the backup from the zip
Click to expand...
Click to collapse
Yes I did, the only problem is that it will not boot. It gets stuck at the first honor logo.
It only booted when I tried the first solution but in that case again it was showing 'unknown device' '1 gb of ram' etc.
cosminvr27 said:
I am sorry guys,it didn't work.
Tried everything but it seems that the only rom working is the one I mentiones above.
Thank you very much,both of You,though,but for now I guess I'll stock to this one.
The only question now remains how will the fact that it show 'KIW-L24' will afect future updates ?
Click to expand...
Click to collapse
what didn't work ? if you can't follow simple steps how do you expect to fix the phone ?
Did you download and flash the customromtemplate-5x-plk21-b130-r3.zip from paulobrien ? if you did your phone would not still say L24 it would be L21
The phone boots very slow wait at least 10 - 15 min before you give up on it
clsA said:
what didn't work ? if you can't follow simple steps how do you expect to fix the phone ?
Did you download and flash the customromtemplate-5x-plk21-b130-r3.zip from paulobrien ? if you did your phone would not still say L24 it would be L21
The phone boots very slow wait at least 10 - 15 min before you give up on it
Click to expand...
Click to collapse
I read the description of the rom and saw that it boots slow and left it 35 minute by the watch before giving up. That was the only thing that it didn't work,the fact that it didn't boot.
cosminvr27 said:
I read the description of the rom and saw that it boots slow and left it 35 minute by the watch before giving up. That was the only thing that it didn't work,the fact that it didn't boot.
Click to expand...
Click to collapse
well i have no idea what you flashed with fastboot but you seem to have messed up good if the factory stock rom won't boot
cosminvr27 said:
Yes I did, the only problem is that it will not boot. It gets stuck at the first honor logo.
It only booted when I tried the first solution but in that case again it was showing 'unknown device' '1 gb of ram' etc.
Click to expand...
Click to collapse
When it sticks at logo boot in bootloader mode and fast boot flash the stock boot image then the phone WILL reboot as normal mate
Trust me it happened to me and that sorted it
Sent from my KIW-L21 using Tapatalk
chubby65 said:
When it sticks at logo boot in bootloader mode and fast boot flash the stock boot image then the phone WILL reboot as normal mate
Trust me it happened to me and that sorted it
Sent from my KIW-L21 using Tapatalk
Click to expand...
Click to collapse
It worked, thank u very much mate1
cosminvr27 said:
It worked, thank u very much mate1
Click to expand...
Click to collapse
No worries mate glad you're all sorted
Sent from my KIW-L21 using Tapatalk
This happened to me also. I flashed SuperSU on my GR5 and it went on bootloop. So I searched for TWRP Backup but I flashed KIW the first time, so I searched again and found the file. After boot, my about phone is displaying the wrong info. And also the pc detects it as MSM8916 for arm64 with only 2GB space. Please help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 05:47 AM ---------- Previous post was at 05:25 AM ----------
I can't edit or post another link ><"
ht*tp://i.imgur.com/IXvNPEr.png
ht*tp://i.imgur.com/79HFKGq.png

"Unfortunately Setting Has Stopped" after factory reset

After factory resetting/reinstalling [Resurrection_Remix][Android 6.0.1, r_52][Kenzo], the "Unfortunately Setting Has Stopped" has started appearing whenever I try to access the Privacy setting to change the password/pin/pattern option. I also noticed that the Fingerprint scanner is no longer in the Privacy setting.
Under TWRP I have also tried wiping Dalvik / ART Cache, Data, Internal Storage, and Cache when reinstalling any other Custom ROMs and Gaap. The other custom ROMS I've installed are causing the Setting->Privacy option to crash also. All the searches I've made doesn't seem to fix the issue, particularly the searches in the Redmi section. Any suggestion would be helpful, thanks.
phonester said:
After factory resetting/reinstalling [Resurrection_Remix][Android 6.0.1, r_52][Kenzo], the "Unfortunately Setting Has Stopped" has started appearing whenever I try to access the Privacy setting to change the password/pin/pattern option. I also noticed that the Fingerprint scanner is no longer in the Privacy setting.
Under TWRP I have also tried wiping Dalvik / ART Cache, Data, Internal Storage, and Cache when reinstalling any other Custom ROMs and Gaap. The other custom ROMS I've installed are causing the Setting->Privacy option to crash also. All the searches I've made doesn't seem to fix the issue, particularly the searches in the Redmi section. Any suggestion would be helpful, thanks.
Click to expand...
Click to collapse
Flash radio.zip fix.and dont forget to flash gapps after flashing roms.
Sent from my Redmi Note 3 using Tapatalk
khan_pegasus said:
Flash radio.zip fix.and dont forget to flash gapps after flashing roms.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
It worked, thanks.
link to download radio.zip?
This situation happens when you switch to an OFFICIAL Rom from an UNOFFICIAL one like Mokee or RR from Siddhesh or Santosh. This is because these ROMs lock the bootloader and cause other problems too.
Radio.zip may not always fix the problem. If you are really stuck, there is a lengthy process that is guaranteed to work.
1. Flash one of the MiUI Fastboot ROM (global or chinese stable works fine) for RN3SD with Mi Flash tool. Use Flash All in the options at the bottom.
2. If you had an officially unlocked bootloader, use the Mi Unlocker tool to unlock your bootloader. Otherwise, you need to follow the unofficial unlock guide.
3. Flash official TWRP or a variant if you now what you are doing. Refer to this thread if you are not sure which TWRP will work.
3a. Download and copy this file to internal storage - LazyFlasher. I have verified this file to work with MiUI7 and MiUI8 global.
3b Reboot the phone in fastboot mode. On your PC, copy the TWRP img file to the adb directory and open command window there. Rename it to recovery.img. Use this command
Code:
fastboot flash recovery recovery.img
3c Boot into recovery (using ADB or Vol-pwr button shortcut). DO NOT BOOT into the phone before you do this. Flash the Lazyflasher zip with TWRP. You could probably flash this using fastboot too, I just never tried it.
Dhanajay made a guide video here. The video is a little outdated, and the updated instructions are in the description and comments.
You phone is now rooted and you have TWRP. Happy flashing.
This method will soon be outdated as a graphical UI for ADB is already in progress. Others have done it before, but this one shows real promise. Check here for details.
It has been a few months now since the RN3SD launch and the time has come when unofficial ROMs are no longer the best option around. Most Official ROMs, including the ones from RR and XOSP among others work great now and are incredbilby smooth and efficient. The war for the best kernel is now starting, and custom kernels will be responsible for the next round of reasons for bricked phones. Be VERY careful when you are flashing a ROM with a custom kernel. Be prepared to do some legwork if things go wrong.
Joswin said:
link to download radio.zip?
Click to expand...
Click to collapse
http://builder.balika011.me/official-cm13/cm-13.0-RADIOS.zip
I would also recommend anyone having this issue to read this post.
talkaboom said:
http://builder.balika011.me/official-cm13/cm-13.0-RADIOS.zip
I would also recommend anyone having this issue to read this post.
Click to expand...
Click to collapse
Link isn't working...
Can you mirror it?
Joswin said:
Link isn't working...
Can you mirror it?
Click to expand...
Click to collapse
Seems to be down. Normally works. Give it some time.
But if you are moving from an unofficial ROM, flashing radios alone is unlikely to work. Radio zip fix is for undetected SIM and IMIE errors. Check your IMIE number in About Phone. If you are showing an IMIE number instead of '0', flashing radio may be pointless.
Joswin said:
Link isn't working...
Can you mirror it?
Click to expand...
Click to collapse
New Link available.
https://mega.nz/#!9hlljJKD!QmjwPqMOH...gOqWkEJ0QasGE4
talkaboom said:
New Link available.
This link needs a decryption key not provided. Why even post this?
Click to expand...
Click to collapse
virtualgates said:
This link needs a decryption key not provided. Why even post this?
Click to expand...
Click to collapse
Link is from August 8th. That **** has mirrored a hundred times by now.
Also, the problem is now tackled in a different way. If you're facing a similar issue, ask in the rom thread you are trying to flash.
If you are facing this problem now, just flash the correct CM firmware.
P.S. On XDA, please do not question why someone posted a link or method that did not work for you. Do your research. No one is obligated to solve your problems.
Flashed radio. Zip. Worked for me.
Sent from my Redmi Note 3 using Tapatalk
Hello talkaboom!
the link is not working anymore. Any chance to upload it again please? Thanks a lot!

Bootloader Unlocked..I think? (SOLVED)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's a screenshot of what im getting after trying to unlock my rn4 with the unlock tool. What this mean? My bootloader unlocked already?
cant boot to recovery i can only see phone and connector icon..
Edit: I realize my bootloader is already unlocked and the thing missing is stock recovery. I installed TWRP and installed xiaomi.eu latest build.
Cheers
mcneil20 said:
Here's a screenshot of what im getting after trying to unlock my rn4 with the unlock tool. What this mean? My bootloader unlocked already?
cant boot to recovery i can only see phone and connector icon..
Cheers
Click to expand...
Click to collapse
What rom do you currently have installed? You must flash the china dev/beta rom, then make sure to enable the OEM unlock option. You then need to boot into fastboot, you should see the fastboot screen as on the phone in the vid below.
https://youtu.be/E-bWR-8EEYU?t=53
You can also log onto the i.mi.com site and log into your mi account and try to locate your device as in the video below.
https://youtu.be/SPyeQjbmQu8?t=55
gsmyth said:
What rom do you currently have installed? You must flash the china dev/beta rom, then make sure to enable the OEM unlock option. You then need to boot into fastboot, you should see the fastboot screen as on the phone in the vid below.
https://youtu.be/E-bWR-8EEYU?t=53
You can also log onto the i.mi.com site and log into your mi account and try to locate your device as in the video below.
https://youtu.be/SPyeQjbmQu8?t=55
Click to expand...
Click to collapse
Then i realize i need to be on china rom before unlocking is done.. *!^#&^&#$&(**$
Edit: Ill flash latest china dev later and hopefully later ill finish my 40gb backup -_-
mcneil20 said:
Then i realize i need to be on china rom before unlocking is done.. *!^#&^&#$&(**$
Edit: Ill flash latest china dev later and hopefully later ill finish my 40gb backup -_-
Click to expand...
Click to collapse
Yes it will wipe everything so definitely backup, i think you can use the built in mi backup to backup apps/some data, then backup that file to a pc.
Use the SP flash tool to flash the china dev rom and stay on this rom to carry out the bootloader unlock. Once unlocked you can then flash whatever you like or install twrp and again flash what you want, you will stay unlocked.
http://en.miui.com/thread-371349-1-1.html
gsmyth said:
Yes it will wipe everything so definitely backup, i think you can use the built in mi backup to backup apps/some data, then backup that file to a pc.
Use the SP flash tool to flash the china dev rom and stay on this rom to carry out the bootloader unlock. Once unlocked you can then flash whatever you like or install twrp and again flash what you want, you will stay unlocked.
http://en.miui.com/thread-371349-1-1.html
Click to expand...
Click to collapse
Helpful indeed! Thanks mate for the hand. Really appreciate it. Coming from S3 to RN4 is a bit hard as i dont get this problems xD
gsmyth said:
Yes it will wipe everything so definitely backup, i think you can use the built in mi backup to backup apps/some data, then backup that file to a pc.
Use the SP flash tool to flash the china dev rom and stay on this rom to carry out the bootloader unlock. Once unlocked you can then flash whatever you like or install twrp and again flash what you want, you will stay unlocked.
http://en.miui.com/thread-371349-1-1.html
Click to expand...
Click to collapse
Yep exactly what he said, btw the Mi Mover app (available from Play Store & install on both devices) works both ways so old phone - new phone & vice versa so you can use that or the MIUI backup.
http://forum.xda-developers.com/redmi-note-4/how-to/creating-backup-using-inbuilt-miui-t3512380
Either way you need to do it achieves the same thing.
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
Yep exactly what he said, btw the Mi Mover app (available from Play Store & install on both devices) works both ways so old phone - new phone & vice versa so you can use that or the MIUI backup.
http://forum.xda-developers.com/redmi-note-4/how-to/creating-backup-using-inbuilt-miui-t3512380
Either way you need to do it achieves the same thing.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Will update tomorrow and hopefully i finally get what i want xD Currently downloading the tgz file @400-900kbps -_-
UPDATE: I've successfully installed TWRP, SuperSU and Latest build by XIOMI.eu. I'm reinstalling backup and so far my verdict is great! Ram consumption decrease and its more faster than before i think I'll try to install Xposed later this day..
mcneil20 said:
UPDATE: I've successfully installed TWRP, SuperSU and Latest build by XIOMI.eu. I'm reinstalling backup and so far my verdict is great! Ram consumption decrease and its more faster than before i think I'll try to install Xposed later this day..
Click to expand...
Click to collapse
Nice one, glad to hear you got sorted! :good:
I had the same issue. Got to know that it was already unlocked by default (how come?)
The best place tout have latest rom/version of any xiaomi devices global/China developer/stable ?

MY REALME 7 WAS STUCK ON ANDROID 10, REALME UI 1.0

Hello friends all right? then, my phone just had a brick and I needed to return to stock rom, but the updates that were available I downloaded and installed, but not arrived android 11 with the realme ui 2.0, but was i used before, but as my smartphone just gave brick needed to downgrade now I can no longer update via OTA to android 11, does not appear to me, someone can help me?
RMX2155
Got the same issue too but for me I was trying to unlock the bootloader. Was on android 12 but after following the steps to unlocking the bootloader I am now stuck on android 10 and my bootloader is still locked
RMX2155
BBlackrn said:
Hello friends all right? then, my phone just had a brick and I needed to return to stock rom, but the updates that were available I downloaded and installed, but not arrived android 11 with the realme ui 2.0, but was i used before, but as my smartphone just gave brick needed to downgrade now I can no longer update via OTA to android 11, does not appear to me, someone can help me?
RMX2155
Click to expand...
Click to collapse
Incarcecon said:
Got the same issue too but for me I was trying to unlock the bootloader. Was on android 12 but after following the steps to unlocking the bootloader I am now stuck on android 10 and my bootloader is still locked
RMX2155
Click to expand...
Click to collapse
updates for RMX2155 model are not being available via settings, it seems to be some kind of sever issue, you can manually update by using sp flash tool, but only do this if you know what you are doing, this will delete your data.
also unlocked bootloaders are facing similar issues with updates, you should relock the bootloader if you want to update.
you can unlock/relock bootloader by using these kind of tool (MTK universal v5)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Incarcecon said:
Got the same issue too but for me I was trying to unlock the bootloader. Was on android 12 but after following the steps to unlocking the bootloader I am now stuck on android 10 and my bootloader is still locked
RMX2155
Click to expand...
Click to collapse
I have fixed this issue all you need is Android 11 ota update update from Android 10 settings then u will start receiving updates
Raghav. said:
I have fixed this issue all you need is Android 11 ota update update from Android 10 settings then u will start receiving updates
Click to expand...
Click to collapse
Wdym u dude?
Should I wait until the update just pops up or is there a way to do it manually
I tried to download the .zip file from realmefirmware.com and flash it thru recovery mode but it says : "Installation Failed"
tony 54325 said:
updates for RMX2155 model are not being available via settings, it seems to be some kind of sever issue, you can manually update by using sp flash tool, but only do this if you know what you are doing, this will delete your data.
also unlocked bootloaders are facing similar issues with updates, you should relock the bootloader if you want to update.
you can unlock/relock bootloader by using these kind of tool (MTK universal v5) View attachment 5794063
Click to expand...
Click to collapse
bro can u plz post a small tutorial on how to do it plz i really need to get back to rui3.0 thx in advance
DaCrab said:
bro can u plz post a small tutorial on how to do it plz i really need to get back to rui3.0 thx in advance
Click to expand...
Click to collapse
Follow this tutorial:
But instead of stock a53(RUI1) frimware you need for download F09(RUI3) frimware for rmx2151, can't paste link here because it will be removed,
After extraction of Ofp file you'll get multiple super.img and one supermap.xml type file..
You only need one super.img, for that you'll need simg2img.exe,
After downloading simg2img.exe put it in the same folder where you extracted the ofp and open cmd in the same folder,
And type following command "simg2img.exe super.xxx.img super.yyy.img super.zzz.img super.img"
where x,y,z will be replaced by names present in supermap file ..
Then you'll have a new file in ofp folder named super.img,
Follow rest of the tutorial afterwards...
You also might need to unlock bootloader.
so im looking at realmefirware(.com) but i cant find the F09 firmware only the C.19 version idk if thats it
I also checked the link in the tutorials description and the codename is RMX2163 and i also dk if its the right files
the last thing i wanna do now is to brick my device
DaCrab said:
so im looking at realmefirware(.com) but i cant find the F09 firmware only the C.19 version idk if thats it
I also checked the link in the tutorials description and the codename is RMX2163 and i also dk if its the right files
the last thing i wanna do now is to brick my device
Click to expand...
Click to collapse
its available on "gsmmafia"
tony 54325 said:
its available on "gsmmafia"
Click to expand...
Click to collapse
Btw u thing rooting is worth it (not only for the custom roms but for the modules and the endless possibilities that root unlocks)
DaCrab said:
Btw u thing rooting is worth it (not only for the custom roms but for the modules and the endless possibilities that root unlocks)
Click to expand...
Click to collapse
Depends on the situations,
If you have only one phone and you are a corporate guy, then its probably not worth it
Also now a days most of the little customisations(including custom roms) can be achieved without root.
However if you plan to root your secondary phone and do all kind of kinky stuff with it then its absolutely fun,
Root always comes with risk.
magnumoZeus said:
Follow this tutorial:
But instead of stock a53(RUI1) frimware you need for download F09(RUI3) frimware for rmx2151, can't paste link here because it will be removed,
After extraction of Ofp file you'll get multiple super.img and one supermap.xml type file..
You only need one super.img, for that you'll need simg2img.exe,
After downloading simg2img.exe put it in the same folder where you extracted the ofp and open cmd in the same folder,
And type following command "simg2img.exe super.xxx.img super.yyy.img super.zzz.img super.img"
where x,y,z will be replaced by names present in supermap file ..
Then you'll have a new file in ofp folder named super.img,
Follow rest of the tutorial afterwards...
You also might need to unlock bootloader.
Click to expand...
Click to collapse
btw dude can u share any guide on this one cause it seems its the only way ( at least for me ) to unlock my bootloader cause i cant do it thru the deep test (or in-depth test ) idk why.
Unlocking the bootloader might be more useful for me rather than flashing back to rui3.0
thx for all the help fam very much appreciated
DaCrab said:
btw dude can u share any guide on this one cause it seems its the only way ( at least for me ) to unlock my bootloader cause i cant do it thru the deep test (or in-depth test ) idk why.
Unlocking the bootloader might be more useful for me rather than flashing back to rui3.0
thx for all the help fam very much appreciated
Click to expand...
Click to collapse
there are tons and dozens of tutorials available online on how to unlock the bootloader,
you can use tools like this
, and there are many more tools available,
quick tutorial steps :
1 click on install drivers
2 select device
3 power off phone
4 click unlock bootloader
5 connect phone using company usb cable, while holding volume up and down key together (in power off state)
done!!!!
magnumoZeus said:
there are tons and dozens of tutorials available online on how to unlock the bootloader,
you can use tools like thisView attachment 5808179 , and there are many more tools available,
quick tutorial steps :
1 click on install drivers
2 select device
3 power off phone
4 click unlock bootloader
5 connect phone using company usb cable, while holding volume up and down key together (in power off state)
done!!!!
Click to expand...
Click to collapse
aye bro sorry for bothering you all the time but i really dont know anything about this whole thing and as it seems u r the only one that can help me
but i unlocked my bootloader and got into a Orange State which cause my system to reboot to recovery can u help me with that fam
thanks for ur time.
DaCrab said:
aye bro sorry for bothering you all the time but i really dont know anything about this whole thing and as it seems u r the only one that can help me
but i unlocked my bootloader and got into a Orange State which cause my system to reboot to recovery can u help me with that fam
thanks for ur time.
Click to expand...
Click to collapse
No problem buddy, just keep searching for solutions.
Orange state is just a msg to inform you that your boot loader has been unlocked,
while in recovery format and wipe data, then reboot.
And next time try to add images also.
And if you plan on using sp flash tool it doesn't matter if your phone is booting or not.
magnumoZeus said:
No problem buddy, just keep searching for solutions.
Orange state is just a msg to inform you that your boot loader has been unlocked,
while in recovery format and wipe data, then reboot.
And next time try to add images also.
And if you plan on using sp flash tool it doesn't matter if your phone is booting or not.
Click to expand...
Click to collapse
So to get this right
Once I unlock the bootloader I will get into the the Orange state which I will able to bypass by formating (wipe data) on my phone and I should be able to boot again right ? On the original rom
And from there I will be able to install the TWRP custom recovery in which I can install my custom rom ?
Right?
DaCrab said:
So to get this right
Once I unlock the bootloader I will get into the the Orange state which I will able to bypass by formating (wipe data) on my phone and I should be able to boot again right ? On the original rom
And from there I will be able to install the TWRP custom recovery in which I can install my custom rom ?
Right?
Click to expand...
Click to collapse
Didn't you said you already unlocked your bootloader
yeah i did but then relocked it to use my phone , i cant use it with the orange state
magnumoZeus said:
No problem buddy, just keep searching for solutions.
Orange state is just a msg to inform you that your boot loader has been unlocked,
while in recovery format and wipe data, then reboot.
And next time try to add images also.
And if you plan on using sp flash tool it doesn't matter if your phone is booting or not.
Click to expand...
Click to collapse
If I format my device while on Orange state will I able to bypass it and install TWRP (or any other custom recovery)
Or I need to do something else ?
Look brother i have managed to bypass that error but now i cant boot to fastboot thru ADB whenever i try it prints some zeros and at the bottom fastboot verification failed can u help me with that?
Also idk how to delete the quotes above

Categories

Resources