Hello friends all right? then, my phone just had a brick and I needed to return to stock rom, but the updates that were available I downloaded and installed, but not arrived android 11 with the realme ui 2.0, but was i used before, but as my smartphone just gave brick needed to downgrade now I can no longer update via OTA to android 11, does not appear to me, someone can help me?
RMX2155
Got the same issue too but for me I was trying to unlock the bootloader. Was on android 12 but after following the steps to unlocking the bootloader I am now stuck on android 10 and my bootloader is still locked
RMX2155
BBlackrn said:
Hello friends all right? then, my phone just had a brick and I needed to return to stock rom, but the updates that were available I downloaded and installed, but not arrived android 11 with the realme ui 2.0, but was i used before, but as my smartphone just gave brick needed to downgrade now I can no longer update via OTA to android 11, does not appear to me, someone can help me?
RMX2155
Click to expand...
Click to collapse
Incarcecon said:
Got the same issue too but for me I was trying to unlock the bootloader. Was on android 12 but after following the steps to unlocking the bootloader I am now stuck on android 10 and my bootloader is still locked
RMX2155
Click to expand...
Click to collapse
updates for RMX2155 model are not being available via settings, it seems to be some kind of sever issue, you can manually update by using sp flash tool, but only do this if you know what you are doing, this will delete your data.
also unlocked bootloaders are facing similar issues with updates, you should relock the bootloader if you want to update.
you can unlock/relock bootloader by using these kind of tool (MTK universal v5)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Incarcecon said:
Got the same issue too but for me I was trying to unlock the bootloader. Was on android 12 but after following the steps to unlocking the bootloader I am now stuck on android 10 and my bootloader is still locked
RMX2155
Click to expand...
Click to collapse
I have fixed this issue all you need is Android 11 ota update update from Android 10 settings then u will start receiving updates
Raghav. said:
I have fixed this issue all you need is Android 11 ota update update from Android 10 settings then u will start receiving updates
Click to expand...
Click to collapse
Wdym u dude?
Should I wait until the update just pops up or is there a way to do it manually
I tried to download the .zip file from realmefirmware.com and flash it thru recovery mode but it says : "Installation Failed"
tony 54325 said:
updates for RMX2155 model are not being available via settings, it seems to be some kind of sever issue, you can manually update by using sp flash tool, but only do this if you know what you are doing, this will delete your data.
also unlocked bootloaders are facing similar issues with updates, you should relock the bootloader if you want to update.
you can unlock/relock bootloader by using these kind of tool (MTK universal v5) View attachment 5794063
Click to expand...
Click to collapse
bro can u plz post a small tutorial on how to do it plz i really need to get back to rui3.0 thx in advance
DaCrab said:
bro can u plz post a small tutorial on how to do it plz i really need to get back to rui3.0 thx in advance
Click to expand...
Click to collapse
Follow this tutorial:
But instead of stock a53(RUI1) frimware you need for download F09(RUI3) frimware for rmx2151, can't paste link here because it will be removed,
After extraction of Ofp file you'll get multiple super.img and one supermap.xml type file..
You only need one super.img, for that you'll need simg2img.exe,
After downloading simg2img.exe put it in the same folder where you extracted the ofp and open cmd in the same folder,
And type following command "simg2img.exe super.xxx.img super.yyy.img super.zzz.img super.img"
where x,y,z will be replaced by names present in supermap file ..
Then you'll have a new file in ofp folder named super.img,
Follow rest of the tutorial afterwards...
You also might need to unlock bootloader.
so im looking at realmefirware(.com) but i cant find the F09 firmware only the C.19 version idk if thats it
I also checked the link in the tutorials description and the codename is RMX2163 and i also dk if its the right files
the last thing i wanna do now is to brick my device
DaCrab said:
so im looking at realmefirware(.com) but i cant find the F09 firmware only the C.19 version idk if thats it
I also checked the link in the tutorials description and the codename is RMX2163 and i also dk if its the right files
the last thing i wanna do now is to brick my device
Click to expand...
Click to collapse
its available on "gsmmafia"
tony 54325 said:
its available on "gsmmafia"
Click to expand...
Click to collapse
Btw u thing rooting is worth it (not only for the custom roms but for the modules and the endless possibilities that root unlocks)
DaCrab said:
Btw u thing rooting is worth it (not only for the custom roms but for the modules and the endless possibilities that root unlocks)
Click to expand...
Click to collapse
Depends on the situations,
If you have only one phone and you are a corporate guy, then its probably not worth it
Also now a days most of the little customisations(including custom roms) can be achieved without root.
However if you plan to root your secondary phone and do all kind of kinky stuff with it then its absolutely fun,
Root always comes with risk.
magnumoZeus said:
Follow this tutorial:
But instead of stock a53(RUI1) frimware you need for download F09(RUI3) frimware for rmx2151, can't paste link here because it will be removed,
After extraction of Ofp file you'll get multiple super.img and one supermap.xml type file..
You only need one super.img, for that you'll need simg2img.exe,
After downloading simg2img.exe put it in the same folder where you extracted the ofp and open cmd in the same folder,
And type following command "simg2img.exe super.xxx.img super.yyy.img super.zzz.img super.img"
where x,y,z will be replaced by names present in supermap file ..
Then you'll have a new file in ofp folder named super.img,
Follow rest of the tutorial afterwards...
You also might need to unlock bootloader.
Click to expand...
Click to collapse
btw dude can u share any guide on this one cause it seems its the only way ( at least for me ) to unlock my bootloader cause i cant do it thru the deep test (or in-depth test ) idk why.
Unlocking the bootloader might be more useful for me rather than flashing back to rui3.0
thx for all the help fam very much appreciated
DaCrab said:
btw dude can u share any guide on this one cause it seems its the only way ( at least for me ) to unlock my bootloader cause i cant do it thru the deep test (or in-depth test ) idk why.
Unlocking the bootloader might be more useful for me rather than flashing back to rui3.0
thx for all the help fam very much appreciated
Click to expand...
Click to collapse
there are tons and dozens of tutorials available online on how to unlock the bootloader,
you can use tools like this
, and there are many more tools available,
quick tutorial steps :
1 click on install drivers
2 select device
3 power off phone
4 click unlock bootloader
5 connect phone using company usb cable, while holding volume up and down key together (in power off state)
done!!!!
magnumoZeus said:
there are tons and dozens of tutorials available online on how to unlock the bootloader,
you can use tools like thisView attachment 5808179 , and there are many more tools available,
quick tutorial steps :
1 click on install drivers
2 select device
3 power off phone
4 click unlock bootloader
5 connect phone using company usb cable, while holding volume up and down key together (in power off state)
done!!!!
Click to expand...
Click to collapse
aye bro sorry for bothering you all the time but i really dont know anything about this whole thing and as it seems u r the only one that can help me
but i unlocked my bootloader and got into a Orange State which cause my system to reboot to recovery can u help me with that fam
thanks for ur time.
DaCrab said:
aye bro sorry for bothering you all the time but i really dont know anything about this whole thing and as it seems u r the only one that can help me
but i unlocked my bootloader and got into a Orange State which cause my system to reboot to recovery can u help me with that fam
thanks for ur time.
Click to expand...
Click to collapse
No problem buddy, just keep searching for solutions.
Orange state is just a msg to inform you that your boot loader has been unlocked,
while in recovery format and wipe data, then reboot.
And next time try to add images also.
And if you plan on using sp flash tool it doesn't matter if your phone is booting or not.
magnumoZeus said:
No problem buddy, just keep searching for solutions.
Orange state is just a msg to inform you that your boot loader has been unlocked,
while in recovery format and wipe data, then reboot.
And next time try to add images also.
And if you plan on using sp flash tool it doesn't matter if your phone is booting or not.
Click to expand...
Click to collapse
So to get this right
Once I unlock the bootloader I will get into the the Orange state which I will able to bypass by formating (wipe data) on my phone and I should be able to boot again right ? On the original rom
And from there I will be able to install the TWRP custom recovery in which I can install my custom rom ?
Right?
DaCrab said:
So to get this right
Once I unlock the bootloader I will get into the the Orange state which I will able to bypass by formating (wipe data) on my phone and I should be able to boot again right ? On the original rom
And from there I will be able to install the TWRP custom recovery in which I can install my custom rom ?
Right?
Click to expand...
Click to collapse
Didn't you said you already unlocked your bootloader
yeah i did but then relocked it to use my phone , i cant use it with the orange state
magnumoZeus said:
No problem buddy, just keep searching for solutions.
Orange state is just a msg to inform you that your boot loader has been unlocked,
while in recovery format and wipe data, then reboot.
And next time try to add images also.
And if you plan on using sp flash tool it doesn't matter if your phone is booting or not.
Click to expand...
Click to collapse
If I format my device while on Orange state will I able to bypass it and install TWRP (or any other custom recovery)
Or I need to do something else ?
Look brother i have managed to bypass that error but now i cant boot to fastboot thru ADB whenever i try it prints some zeros and at the bottom fastboot verification failed can u help me with that?
Also idk how to delete the quotes above
Related
Hi everyone!
Yesterday i decided to start exploring my Xperia X10i and so came across this site, rooted my phone, installed xRecover and tried to unlock the bootloader... BUT it would not work!!! I used the [HOW-TO]UNLOCK bootloader for X10 by 9Lukas5, followed all the steps and it would not work!!
He says you dont need to downgrade, so i was using my 2.3.3 firmware. (downgraded only in flashtool), the semc program just wouldnt finish the job (i checked, i have the semc certificate). It even bricked my phone(stuck on the sony ericcson part) a few times (i managed to revive it). Now i installed the Cyanogen7 mod 003, im wondering if i should try again with the bootloder?
If i have to downgrade to 2.1 please send me a link where i can download the firmware. And its done by the flashtool right? (i got the 0.2.9.1, for some reason the 0.6.7.1 comes up with some error screen when i start it)
Ok, i just downgraded with this file -> Generic version 2.1update1 build 2.1.A.0.435.
Tried to do the bootloader unlock again, thats what comes up (and did on my old 2.3.3):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can I unlock the bootloader with the Cyanogenmod as well?
OMFG!!! AFTER CHANGING BACK TO CYANOGEN7 FROM 2.1 I CANT SEND SMS!!!! HELP SOMEONE!!!!
PLZ HELP! Thanks in advance
Are the developers doing anything except developing and talking to each other?? HOW ABOUT HELPING A NOOB?! (me) FML!!! Fixed the sms problem btw with flashing 2.1 again. CMON SOMEONE, HELP!!!!!!
I'm no expert but I will try to help
What error are you getting with the latest flashtool?
Try using the X10_aZuZu_Kernel_Downgrade_Generic firmware.
http://forum.xda-developers.com/showthread.php?t=1254087
BTW for most of the devices, you need to downgrade and be careful on choosing on the .bat file to unlock. also keep the upgrade file ready.
If you have troubles getting the phone into flash mode use this trick
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs.
So quick clicks on the mouse would help you
kylec said:
I'm no expert but I will try to help
What error are you getting with the latest flashtool?
Click to expand...
Click to collapse
The one i downloaded was from here (Windows version 32 bit btw) : [TOOL/X10] [UPDATE 15/01/2012] Flashtool version 0.6.7.0 - Windows / Linux
Wait, i just installed the 0.6.7.0 from http://androxyde.github.com/ And it seems to be working... But this is the installer, the other one was a zip with the files so maybe it has to be installed.
amrth said:
Try using the X10_aZuZu_Kernel_Downgrade_Generic firmware.
http://forum.xda-developers.com/showthread.php?t=1254087
BTW for most of the devices, you need to downgrade and be careful on choosing on the .bat file to unlock. also keep the upgrade file ready.
If you have troubles getting the phone into flash mode use this trick
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs.
So quick clicks on the mouse would help you
Click to expand...
Click to collapse
The flashmode is not a problem atm, but if thats a good tip for the future
I was using the Azuzu downgrade that is included in the 0.2.9.1 flashtool, isnt it the same one? <---- Yes, im 99% sure it is. Same name and weight of the downloaded file as the one included in the firmwares folder. So i have been using it.
OK!! I USED THE [25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE
(with the working 0.6.7.0)
And apparently i successfully unlocked the bootloader.
Where it says "S1 ERROM VER", if the code looks like this "r8А033" (the letter "r" is small), then you have successfully unlocked the BL, if its capital letter "R", then repeat the steps for BL unlocking.
Click to expand...
Click to collapse
<--- i get that r8А033
BUT!!! I just installed the [2.3.3+2.3.7+arc][05/02/2012]ThGo2 v14.0 [Bestest] [ICS theme] [with T.E.A.M] AND WHEN THE PHONE LOADS THE FIRST THING THAT POPS UP IS...GUESS WHAT?... SONY ERICCSON!!!! So that meant i havent unlocked it?? Im so confused
OR do i have to install a custom kernel (firmware or watever) before installing any other firmware? Koz I installed the ThGo2 from my generic 2.3.3 (without flashing anything or installing any kernels) that i updated through PC Companion. If i do need to install something, then how? Flashtool? And What? Sorry for being such a Noob guys
So basically what i did was -> Phone is on 2.3.3 -> Root phone with flash tool -> Install Xrecovery -> "Unlock BL" -> Xrecovery, install the ThGo2.
Whats kernel by the way?
And again I am left alone.... SERIOUSLY, WHERE IS EVERYONE THAT CAN HELP? WHAT DID I JOIN THE SITE FOR IF NOONE IS HELPING ME? FMFL.
Hey sorry about late reply.
After unlocking bootoader you will keep seeing SE boot image until you flash custom kernel.
The ROM you want will have the kernel that needs to be flashed via flashtool.
If you download FXP cm7, the kernel ftf is in the flashtool -> firmwares folder. Just drag and drop onto flashtool
Give that a go first and let me know what happens.
Ill try check this more often
Sent from my X10i using XDA App
Ok, thanks man!! Since i decided to go with the ThGo2 (its faster than cyanogen as far as i can see), i have to flash one of his kernels. He got 2 --> X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0 & X10_2.3.3_Th_kernel-n1.1_wifi. I'll try the first one now and report how it goes. Hopefully it works. And i hope my phone doesnt brick either
TeqTronix said:
Ok, thanks man!! Since i decided to go with the ThGo2 (its faster than cyanogen as far as i can see), i have to flash one of his kernels. He got 2 --> X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0 & X10_2.3.3_Th_kernel-n1.1_wifi. I'll try the first one now and report how it goes. Hopefully it works. And i hope my phone doesnt brick either
Click to expand...
Click to collapse
haha no worries. You should be fine so long as you don't pull the battery or cable while you're flashing a new baseband (which you shouldn't have to do unless your running a 2.1 rom )
ThGo2 is a great rom. Have fun
YYYYEEEEESSSSS!!!! IT WORKED!!! FINALLY!!!! DUDE, U R EPIC!!! THANKS HEAPS!!! Time to click the "thanks" button on your post! Now u have 20 So grateful!!
TeqTronix said:
YYYYEEEEESSSSS!!!! IT WORKED!!! FINALLY!!!! DUDE, U R EPIC!!! THANKS HEAPS!!! Time to click the "thanks" button on your post! Now u have 20 So grateful!!
Click to expand...
Click to collapse
Haha no problem glad I was able to help.
Sent from my Acer Iconia A500 using XDA Premium App
kylec said:
Hey sorry about late reply.
After unlocking bootoader you will keep seeing SE boot image until you flash custom kernel.
The ROM you want will have the kernel that needs to be flashed via flashtool.
If you download FXP cm7, the kernel ftf is in the flashtool -> firmwares folder. Just drag and drop onto flashtool
Give that a go first and let me know what happens.
Ill try check this more often
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Hey i think that answers my question but just to clarify: So this is what happened i usred flashtool 0.9.0 to unlock the bootloader so that i can unlock my phone from rogers. Everything went right. Flashtool did its thing completed the bootloader unlock recognized my phone and confirmed unlock with small r using s1 tool. After reeboot two things still happen. First i am still booting through the original se prompt thst oalways had, and two, my phone is still locked to rogers. I am using the standard firmware that came from sony with the 2.3.3 upgrade. So from what i understand from your post all i have to do is use the flashtool and flash my phone with custom firmware to complete the job, and if so which firmware would i use? Thanks
Osirisvii said:
Hey i think that answers my question but just to clarify: So this is what happened i usred flashtool 0.9.0 to unlock the bootloader so that i can unlock my phone from rogers. Everything went right. Flashtool did its thing completed the bootloader unlock recognized my phone and confirmed unlock with small r using s1 tool. After reeboot two things still happen. First i am still booting through the original se prompt thst oalways had, and two, my phone is still locked to rogers. I am using the standard firmware that came from sony with the 2.3.3 upgrade. So from what i understand from your post all i have to do is use the flashtool and flash my phone with custom firmware to complete the job, and if so which firmware would i use? Thanks
Click to expand...
Click to collapse
I think you misunderstood the fact that this is bootloader unlocking not network unlock
So you are still stuck with rogers. There's no free way to network unlock but there are some cheap ones you can find out
Sent from my X10
Guess I did misynderstand it....but i would still like to unlock my bootloader. Do i need a custom flash from flashtool or is there a specific one i need. Also i tried to check how many attempts i got left with the menu back...etc fromthe unlock screen command and its not workung. Is there a reason for this or do i ask that qyestion somewhere else?
Osirisvii said:
Guess I did misynderstand it....but i would still like to unlock my bootloader. Do i need a custom flash from flashtool or is there a specific one i need. Also i tried to check how many attempts i got left with the menu back...etc fromthe unlock screen command and its not workung. Is there a reason for this or do i ask that qyestion somewhere else?
Click to expand...
Click to collapse
You can unlock your bootloader anytime and relock is as many times as you want
That unlocking chances are for network unlock i guess dunno about it much
To unlock your bootloader there's a good guide in development section named G-face guide for flashtool. Search for it. I'm on phone right now can't search
Sent from my X10
Complete method to extract system files from ftf files of xperia devices for ics
(For gb u can use nero young method which is simple, but for ics u will get system files from ftf by this method (for windows)u will not get extracted folder by nero young method )
whom is this tutorial for?
Click to expand...
Click to collapse
For those who need exact system files from FTF of SONY XPERIA smart phone
Click to expand...
Click to collapse
TOOLS NEEDED
Flash tool for xperia devices (use flash tool version v 0.9.0.0 get it from here:http://androxyde.github.com/)
unyaffs tool (get it from here : http://www.mediafire.com/?h631v46n8v6efe3 )
Click to expand...
Click to collapse
METHOD :
step 1:
Open the ftf file using winrar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
step 2:
Extract which ever file u need (in this case i need system folder so i extracted system.sin )
step 3:
Open flash tool and click advanced option and then click sin editor
step 4:
Go to system.sin file from where u had extracted and open file
step 5:
Click dump data option
Wait for it to finish the process
step 6:
After finishing the process u will get two files in the folder where u r having original system.sin (one will be system.partinfo and other will be system.yaffs2 ) so tht u get yaffs2 file continue with the next step
Click to expand...
Click to collapse
step 7:
Download unyaffs tool from the link provided first and extract unyaffs.exe and cygin1.dll to c drive of ur system by making a folder named "unyaffs"
Click to expand...
Click to collapse
step 8:
Go to the folder where u get system.yaffs2 ( the file we get though the flash tool process) and copy the file
step 9:
Paste it to the unyaffs folder in "c"
step 10:
While u are in unyaffs folder press shift + right mouse button then only u will get "open command window here option", click that.... Other wise u can go to this folder using usual command method
step 11:
U will get command window inside unyaffs folder
step 12:
U should type inside the command window "unyaffs.exe system.yaffs2" (app name)(space)(name of the file u need to extract, if u need to extract kernel use tht file name here) and then press enter
step 13:
Wait for some time " until u see end of image " and u can see the extracted folders appearing in the unyaffs folder
through this method u can get any .sin file inside ur ftf
thankyou for reading my tutorial
DONT FORGET TO PRESS THANKS IF I HAD HELPED U
Click to expand...
Click to collapse
Super Thanks Bro
This tutorial is Very Helpful and Should Be Pinned
Copying files from phone to PC was Killing Me
Okay, i have a serious question
First of all, yes i have read in TONS of articles, blogs, and many forums about the problem i have, and it could be useful for everyone if we get sorted out.
See, my phone has locked bootloader. even if i unlock it with s1tool, it wont enter fastboot mode (because fastboot mode is disabled, and no one knows how to enable it apart from paying someone with stool or omnius. and YES, I DID THE PROCEDURE PRESSING THE CORRECT BUTTON AND EVERYTHING, IT'S NOT ABOUT ME NOT KNOWING HOW TO FASTBOOT). so, even if i unlock my bootloader, i cannot flash kernels because i can't enter fastboot mode.
BUT!
My phone is rooted, which means I can flash roms and practically anything that's not a kernel through recovery mode (x-parts) in zip files, right? So, here's my question:
What if I extract the contents of the kernel IMG file, and then make a flashable zip file out of it? Would it work to flash my kernel? I would have tried it before asking, believe me, but I do not know how to extract a IMG kernel file
Thanks in advance
juhn777 said:
What if I extract the contents of the kernel IMG file, and then make a flashable zip file out of it? Would it work to flash my kernel? I would have tried it before asking, believe me, but I do not know how to extract a IMG kernel file
Thanks in advance
Click to expand...
Click to collapse
Whether it works or not ,IDK ,You should Ask some Dev whom works with Kernels ,I guess there's a reason why in sony devices we Always use .img files instead of .zip when it comes to kernels
Anyway
to Extract IMG Files You can try The following programs (Windows)
Alcohol 120% , UltraISO , Nero
you don't have to buy anything ,you can work it out with trial :good:
juhn777 said:
Okay, i have a serious question
First of all, yi have read in TONS of articles, blogs, and many forums about the problem i have, and it could be useful for everyone if we get sorted out.
See, my phone has locked bootloader. even if i unlock it with s1tool, it wont enter fastboot mode (because fastboot mode is disabled, and no one knows how to enable it apart from paying someone with stool or omnius. and YES, I DID THE PROCEDURE PRESSING THE CORRECT BUTTON AND EVERYTHING, IT'S NOT ABOUT ME NOT KNOWING HOW TO FASTBOOT). so, even if i unlock my bootloader, i cannot flash kernels because i can't enter fastboot mode.
BUT!
My phone is rooted, which means I can flash roms and practically anything that's not a kernel through recovery mode (x-parts) in zip files, right? So, here's my question:
What if I extract the contents of the kernel IMG file, and then make a flashable zip file out of it? Would it work to flash my kernel? I would have tried it before asking, believe me, but I do not know how to extract a IMG kernel file
Thanks in advance
Click to expand...
Click to collapse
hey bro check whtr ur bootloader is unlocked with the unofficial bootloader unlocking SE tool..
roninnbaby said:
hey bro check whtr ur bootloader is unlocked with the unofficial bootloader unlocking SE tool..
Click to expand...
Click to collapse
man, i did verify if my bootloader was unlocked through both s1tool and flashtool, both tell me i have unlocked bootloader (give me a code like r384u28 instead of R384u28) so yes I HAVE UNLOCKED BOOTLOADER, but can't enter fastboot anyway :crying: for ****s sake
i would pay for it to be unlocked, really, but i live in Chile and no one knows **** about anything around here. if anyone could do it for me, i could make a bank transfer or something since i don't (and can't) have a business card or something like that (because of the ****ty laws around here, requiring people to win lots of money before getting a credit card or stuff like that).
anyone knows what can i do? ):
Thanks man.
Working like charm!.
juhn777 said:
man, i did verify if my bootloader was unlocked through both s1tool and flashtool, both tell me i have unlocked bootloader (give me a code like r384u28 instead of R384u28) so yes I HAVE UNLOCKED BOOTLOADER, but can't enter fastboot anyway :crying: for ****s sake
i would pay for it to be unlocked, really, but i live in Chile and no one knows **** about anything around here. if anyone could do it for me, i could make a bank transfer or something since i don't (and can't) have a business card or something like that (because of the ****ty laws around here, requiring people to win lots of money before getting a credit card or stuff like that).
anyone knows what can i do? ):
Click to expand...
Click to collapse
ho did u tried to enter to fast boot???
roninnbaby said:
ho did u tried to enter to fast boot???
Click to expand...
Click to collapse
i stated in a previous post that i did the correct procedure to enter fastboot, so again, here's what i do/did:
-before everything, i installed busybox, correct fastboot drivers, correct phone drivers, proper adb drivers, etc
-flashed some roms with both flashtool and cwm, so my cable is not the problem, neither is my cellphone hardware since i can flash stuff
-many, many times, and in many, many different ways i turned off my phone, pressed the menu key and without letting go the menu key i connected the usb cable (also tried vol up, vol down, home key, etc)
-never heard any "connected hardware" sound from windows
-never got the blue light for more than 2 sec, then it started charging the phone instead, with green light
so yes, I DO KNOW THE PROCEDURE, really, i'm not that noob you know, been trying this for months actually
that's the problem, because i've tried everything and nothing seems to work, so looks like i gotta pay someone with wotan server, se tool 2, omnius or something like that, but here in chile there is NO ONE, and i really mean NO ONE who knows even what those programs do
and here i come to you my dear friends... thanks to all who try to help me
juhn777 said:
i stated in a previous post that i did the correct procedure to enter fastboot, so again, here's what i do/did:
-before everything, i installed busybox, correct fastboot drivers, correct phone drivers, proper adb drivers, etc
-flashed some roms with both flashtool and cwm, so my cable is not the problem, neither is my cellphone hardware since i can flash stuff
-many, many times, and in many, many different ways i turned off my phone, pressed the menu key and without letting go the menu key i connected the usb cable (also tried vol up, vol down, home key, etc)
-never heard any "connected hardware" sound from windows
-never got the blue light for more than 2 sec, then it started charging the phone instead, with green light
so yes, I DO KNOW THE PROCEDURE, really, i'm not that noob you know, been trying this for months actually
that's the problem, because i've tried everything and nothing seems to work, so looks like i gotta pay someone with wotan server, se tool 2, omnius or something like that, but here in chile there is NO ONE, and i really mean NO ONE who knows even what those programs do
and here i come to you my dear friends... thanks to all who try to help me
Click to expand...
Click to collapse
hey dont be angry...i try to help u only ... so be patient... otherwise none in this forum will help u... because no one is having responsiblity to serve u ,,,... ok...
actually the problem is with ur bootloader...i think so ...we cant give u a complete help until u give correct answers for wht they ask...trial and error method is only one possible in this field...u try to unlock the bootloader via official tool once more and check whtr ur both "r" is in small letters...
yes, sorry... i didn't mean to be rude, i was just clarifying it's not the common problem every noob has, it's something more than that
i cannot unlock via the official way (sony site, right?) because my phone says "unlock bootloader allowed: no", so it won't let me (won't enter fastboot anyways)
keep on getting the error broken image file...
emwno said:
keep on getting the error broken image file...
Click to expand...
Click to collapse
use flash tool version 0.9.0.0 or 0.9.6...
roninnbaby said:
use flash tool version 0.9.0.0 or 0.9.6...
Click to expand...
Click to collapse
I got 9.4. Downloading 9.6
How to rebuild it back?
pls help me
thanks
12793080 said:
How to rebuild it back?
pls help me
thanks
Click to expand...
Click to collapse
if u are in a starting phase u need to setup android kitchen and u can customize ur rom... u need more reading
12793080 said:
How to rebuild it back?
pls help me
thanks
Click to expand...
Click to collapse
rebuilding back to ftf is not possible usually they are cooked by the developers and ziped file by signing it so tht u can flash through CWM recovery
if u know any other way than this please post the link to this thread so tht it will help in future
I think this thread should be in Xperia threads as a sticky since ftf files r more or less found only in Xperia line up...
Sent from my ST25i using xda premium
Hey man thanks for tut. Im using flashtool 9.8 and i dont need yaffs2 extractor you can extract yaffs2 files with flashtool too (Tools>Extractors>Yaffs2)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
hello guys in last few days ME and my friend Dhruv worked so hard to finally got Twrp ready to use so please makr sure to hit thanks ( it's free and easy way to help me )
Notice1:
both phones they share same kernel and tree and both have A/B partitions, this twrp based on nokia7+
Notice2:
take a backup for your data and your important files or folders before you start your Warrenty will be lost
I'm not responsible for any damage in your phone but I'll always and as usual do my best to help you in case something goes wrong
Notice3:
to reboot recovery from buttons follow this steps:
first of all you have to plug your phone to pc or charger and switch off your phone totally then press and hold volume up and power at the same time untill the bootloader`s unlock message disappear after that release power button and keep holding volume up
there you are
Notice4:
to boot to fastboot switch off your phone plug it to charger or pc wait till the screen charging become black now press and hold volume down and power buttons you`ll get fastboot page there you are
Nokia 6.1 (6 2018) Twrps:
October
https://drive.google.com/file/d/1bF1oNRzH0Kj1i5PZ7E_OijCVNvvy8gcF/view?usp=sharing
September
https://drive.google.com/file/d/1bupZhAXIik0LTEJVReSAO6yGAEEYvpSL/view?usp=sharing
August
https://drive.google.com/file/d/1V_3ORXibJUm12IGsYWCs_D3hBHNpvgG2/view?usp=sharing
July
https://drive.google.com/file/d/1XoUAbzPbx_JHccxttXtXGHDGHwDBqQO7/view?usp=sharing
June
https://drive.google.com/file/d/11kEZTItYhiU_U372a2cXadafJJZE3hAr/view?usp=sharing
Twrp for Nokia 6.1 plus
August
https://drive.google.com/file/d/1u4tcdcWsA-C6LKEWr6wwFmEn3RlNOS3s/view?usp=sharing
INSTALLATION
required :
1- unlocked bootloader
2- ADB and fastboot
3- enable usb debugging in developer settings.
4- use those codes
Code:
adb shell
Code:
reboot bootloader
now we flash it
Code:
fastboot flash boot <image`s name>.img
then
Code:
fastboot reboot
it will boot to system dirctly so reboot to recovery
Code:
adb reboot recovery
6- install magisk.zip v17.1 + download it with latest apk from here (( thanks for Magisk developers )
https://forum.xda-developers.com/app...80cb6-t3618589
7- that`s all please if you like my work hit like and if you want to share cup of cappuccino with me
paypal.me/MaherAbdulghani
Nokia6.1 group on Telegram go here
https://t.me/nokia6_1
Nokia globle group on Telegram go here
https://t.me/joinchat/EDAqGkPkzNQG5b7q28b1yw
Special thanks to:
Team Win Recovery Project developers
my friend Dhruv for his help
Reserved
#Reserved
Ok cool but this nokia phone can't be bootloaded into; it's always locked, even if you tick on allow oem unlocking in dev settings fastboot will tell you it doesn't have permission. Whats the purpose of this? Is there some kind of way to get past it that I am not aware of?
pixeloite said:
Ok cool but this nokia phone can't be bootloaded into; it's always locked, even if you tick on allow oem unlocking in dev settings fastboot will tell you it doesn't have permission. Whats the purpose of this? Is there some kind of way to get past it that I am not aware of?
Click to expand...
Click to collapse
You need to unlock bootloader, it is a paid service....
@Maherabed1986 can you add link to the bootloader unlock to your guide?
Sent from my Lenovo TB-8704F using XDA Labs
Ja_som said:
You need to unlock bootloader, it is a paid service....
Sent from my Lenovo TB-8704F using XDA Labs
Click to expand...
Click to collapse
I have not seen this service anywhere, I did see that a page containing this service was deleted due to paid services, though. Regardless, I can imagine only a few handfuls of people being able to make use of this, which is a shame.. I hope in the future some method of unlocking it at home gets discovered, but that probably won't happen knowing nokia.
pixeloite said:
I hope in the future some method of unlocking it at home gets discovered, but that probably won't happen knowing nokia.
Click to expand...
Click to collapse
I also hope, not because $5 is much for it, but I rather do it myself w/o giving my IMEI or any other infos to someone. As it was on Nexus devices.
Sent from my Lenovo TB-8704F using XDA Labs
Ja_som said:
You need to unlock bootloader, it is a paid service....
@Maherabed1986 can you add link to the bootloader unlock to your guide?
Sent from my Lenovo TB-8704F using XDA Labs
Click to expand...
Click to collapse
No i can't but you can ask the guys on the groups
I'm new here and I don't know much about phones but I'll ask a dumb question anyway. Can't you do something about unlocking the bootloader now that you have a working rooted version w/ twrp ? If the answer is no please elaborate on why not.
madddking said:
I'm new here and I don't know much about phones but I'll ask a dumb question anyway. Can't you do something about unlocking the bootloader now that you have a working rooted version w/ twrp ? If the answer is no please elaborate on why not.
Click to expand...
Click to collapse
Because no one still now how to generate serial number and Imei number to get unlock file only one who knows that and he selling it for others and others resell it to me /you/ and othere users
@Maherabed1986 Thank you for getting this device rooted. Why does Magisk has Preserve force encryption selected by default?
Is the Nokia 6.1 encrypted by default? I had many Android devices and none were encrypted by default. I didn't know this Nokia was encrypted until I saw it on Magisk.
@Maherabed1986 Thanks so much for your efforts, I would like to contribute a dump of my boot.img for my model of Nokia 6.1 (TA-1045) but the instructions didn't quite work the way I expected, when I attempt to temp boot into the bootloader linked for the Nokia 6.1 it just boots into regular Android and then trying to su in the adb shell it tells me the command can't be found (because I am not rooted yet, of course). Am I missing something? How can I help?
spyda256 said:
@Maherabed1986 Thanks so much for your efforts, I would like to contribute a dump of my boot.img for my model of Nokia 6.1 (TA-1045) but the instructions didn't quite work the way I expected, when I attempt to temp boot into the bootloader linked for the Nokia 6.1 it just boots into regular Android and then trying to su in the adb shell it tells me the command can't be found (because I am not rooted yet, of course). Am I missing something? How can I help?
Click to expand...
Click to collapse
Contact with me on telegram will help you more
Maherabed1986 said:
Contact with me on telegram will help you more
Click to expand...
Click to collapse
Just sent you the boota and bootb imgs, hope that helps develop TWRP for the TA-1045! Thanks for helping get me to a point where I could get the boot dump.
Rooting with KingRoot app and than using this TWRP-Recovery possible?
I'm new here and I don't know much about phones, rooting etc., so i have this question:
Can i root my phone (TA-1068) in the first step with the KingRoot app and than install this TWRP-TA-1068-Recovery on this rooted phone?
(mayme per simple installing with Root Explorer - and without computer and adb...?)
Hello... yesterday night at Nokia 6.1 I try 2 times to flash recovery but I didn't succed. I use adb and phone stuck at fastboot (download mode) PC write wait for phone.. any help?
chriskleov said:
Hello... yesterday night at Nokia 6.1 I try 2 times to flash recovery but I didn't succed. I use adb and phone stuck at fastboot (download mode) PC write wait for phone.. any help?
Click to expand...
Click to collapse
What model do you have (TA-10xx)? And did you try to just boot before trying to flash the img?
spyda256 said:
What model do you have (TA-10xx)? And did you try to just boot before trying to flash the img?
Click to expand...
Click to collapse
Can you understand from screenshot? No I don't boot before flashing.
Just tired this on my USA Nokia 6.1 TA-1045 ... Used Twrp-N6.1-TA-1045.img (md5 6e9b859f6fe6138aa14beaea6cbdb26d ) in slot a and b using the commands provided and now my phone can't get passed the NOKIA screen. Any ideas?
---------- Post added at 08:13 AM ---------- Previous post was at 07:54 AM ----------
After doing a "fastboot -w", I was able to boot into TWRP but I am bootlooping when trying to boot into the system. Will do further research
prg318 said:
Just tired this on my USA Nokia 6.1 TA-1045 ... Used Twrp-N6.1-TA-1045.img (md5 6e9b859f6fe6138aa14beaea6cbdb26d ) in slot a and b using the commands provided and now my phone can't get passed the NOKIA screen. Any ideas?
---------- Post added at 08:13 AM ---------- Previous post was at 07:54 AM ----------
After doing a "fastboot -w", I was able to boot into TWRP but I am bootlooping when trying to boot into the system. Will do further research
Click to expand...
Click to collapse
That's why i dont try it. Did you wipe all cache like dalvik.
You need first unlock bootaloder,
-> Activate developer options
-> Allow OEM UNLOCK
Run the app(that is inside the zip on attchment(choose ur device))
Then go to query unlock bootloader, wait few seconds and it will go automatically to fastboot.
with your windows PC and fastboot installed, run this command: fastboot flashing unlock in your CMD/Prompt
choose with volume Down to accept unlocking
after that, don't quit fastboot screen yet.
Run the ROOT.bat on the attachment, wait few seconds and press any key, it will close and your device is rooted <3
just download latest magisk manager and there u go
samuk190 said:
You need first unlock bootaloder,
-> Activate developer options
-> Allow OEM UNLOCK
Run the app(that is inside the zip on attchment(choose ur device))
Then go to query unlock bootloader, wait few seconds and it will go automatically to fastboot.
with your windows PC and fastboot installed, run this command: fastboot flashing unlock in your CMD/Prompt
choose with volume Down to accept unlocking
after that, don't quit fastboot screen yet.
Run the ROOT.bat on the attachment, wait few seconds and press any key, it will close and your device is rooted <3
just download latest magisk manager and there u go
Click to expand...
Click to collapse
Hello samuk190, this is only for GT Neo A.19 and i am actual on A.22 FW.
I need/search the "boot.img" and "vbmeta.img".
The "GT-Neo-A.19-Magisk-11.img" and "vbmetaA.19.img" so called in the "realme GT NeoA.19ROOT.bat" in the Archiv is not embedded.
Have you a Link for the "boot.img" and "vbmeta.img" from A.19 or A.22 FW?
thx
Zenpool said:
Hello samuk190, this is only for GT Neo A.19 and i am actual on A.22 FW.
I need/search the "boot.img" and "vbmeta.img".
The "GT-Neo-A.19-Magisk-11.img" and "vbmetaA.19.img" so called in the "realme GT NeoA.19ROOT.bat" in the Archiv is not embedded.
Have you a Link for the "boot.img" and "vbmeta.img" from A.19 or A.22 FW?
thx
Click to expand...
Click to collapse
sadly not. Maybe you can extract boot.img and vbmeta.img from oppo stockrom
There is sadly absolutely nothing to find for the GT Neo.
For the realme GT you can extract the boot.img and vbmeta.img from the RMX2202_11.A.16 (Android 11) FW, this is the Rollbackpackage (back to Android 11) from the GT Android 12 beta.
A little Question, for what have you unlocked your GT if you can't root it?
Is there a specific reason why you don't want to share (all) the files with us?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zenpool said:
There is sadly absolutely nothing to find for the GT Neo.
For the realme GT you can extract the boot.img and vbmeta.img from the RMX2202_11.A.16 (Android 11) FW, this is the Rollbackpackage (back to Android 11) from the GT Android 12 beta.
A little Question, for what have you unlocked your GT if you can't root it?
Click to expand...
Click to collapse
I've unlocked realme gt, and i just shared all files i have, maybe my windows defender did block when i zipped again, well.. i will download again and share
Oh what I thought this was the answer but it seems dodgy... Why is it so hard to root the GT neo
Flashmeister said:
Oh what I thought this was the answer but it seems dodgy... Why is it so hard to root the GT neo
Click to expand...
Click to collapse
because realme didnt released kernel tree and devices for it so no one can compile twrp
Do you need to do deep testing apk ?
Also, can you relock and revert or not ?
thank you
amsh1 said:
Do you need to do deep testing apk ?
Also, can you relock and revert or not ?
thank you
Click to expand...
Click to collapse
yes you can relock -> fastboot flashing lock
Got the European version that's released this week in a few countries including The Netherlands. Had to download the root GT.zip on my laptop and transfer with the USBcable to the phone to get it installed. Couldn't do it on the phone directly. In the app I see only a box to check and a button with 'Submit Application'. I expected some more info in this app. Anybody got this same situation? Don't want to brick the device the first day of owning it
Stropdas said:
Got the European version that's released this week in a few countries including The Netherlands. Had to download the root GT.zip on my laptop and transfer with the USBcable to the phone to get it installed. Couldn't do it on the phone directly. In the app I see only a box to check and a button with 'Submit Application'. I expected some more info in this app. Anybody got this same situation? Don't want to brick the device the first day of owning it
Click to expand...
Click to collapse
Click on the button on right upper corner "Query Verification Status" . Then you start the test mode which basically your phone boot into fastboot. Then, you enter your fastboot commands.
samuk190 said:
You need first unlock bootaloder,
-> Activate developer options
-> Allow OEM UNLOCK
Run the app(that is inside the zip on attchment(choose ur device))
Then go to query unlock bootloader, wait few seconds and it will go automatically to fastboot.
with your windows PC and fastboot installed, run this command: fastboot flashing unlock in your CMD/Prompt
choose with volume Down to accept unlocking
after that, don't quit fastboot screen yet.
Run the ROOT.bat on the attachment, wait few seconds and press any key, it will close and your device is rooted <3
just download latest magisk manager and there u go
Click to expand...
Click to collapse
After that i got a bootloop. How can I fix it now?) The bootloader is unlocked. recovery/fastboot modes working.
CYAN193 said:
After that i got a bootloop. How can I fix it now?) The bootloader is unlocked. recovery/fastboot modes working.
Click to expand...
Click to collapse
Try formatting and full data wipe.
Via both recovery and fastboot
Stropdas said:
Got the European version that's released this week in a few countries including The Netherlands. Had to download the root GT.zip on my laptop and transfer with the USBcable to the phone to get it installed. Couldn't do it on the phone directly. In the app I see only a box to check and a button with 'Submit Application'. I expected some more info in this app. Anybody got this same situation? Don't want to brick the device the first day of owning it
Click to expand...
Click to collapse
Holy God!
you need wait stock rom to be released to flash, this root method wasnt tested for the european version, only for chinese version as both kernel and patched files is different you can expect them to not work
amsh1 said:
Click on the button on right upper corner "Query Verification Status" . Then you start the test mode which basically your phone boot into fastboot. Then, you enter your fastboot commands.
Click to expand...
Click to collapse
Query gave an error because I requested nothing.
samuk190 said:
Holy God!
you need wait stock rom to be released to flash, this root method wasnt tested for the european version, only for chinese version as both kernel and patched files is different you can expect them to not work
Click to expand...
Click to collapse
So, 'Root Realme GT / GT NEO Easily!' isn' t always easy I already thought that was the case. Maybe include CN/China version in the topic name and first post now that the European version is for sale? I still use my LG V30 for now until I get root on the GT. A good adblocker and viper4android need it to function.
Stropdas said:
So, 'Root Realme GT / GT NEO Easily!' isn' t always easy I already thought that was the case. Maybe include CN/China version in the topic name and first post now that the European version is for sale? I still use my LG V30 for now until I get root on the GT. A good adblocker and viper4android need it to function.
Click to expand...
Click to collapse
alright but keep in mind with rooting ur fingerprint will be broken until relock bootloader
Fingerprint not working? Or is it just me?
CYAN193 said:
Fingerprint not working? Or is it just me?
Click to expand...
Click to collapse
it does not work, and i dont recommend rooting anymore, i got my device bricked after flashing chinese rom stock and relocking.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Natesu53 said:
View attachment 5826507View attachment 5826509
Click to expand...
Click to collapse
?????
DrScrad said:
?????
Click to expand...
Click to collapse
Do you have a question
I managed to capture a full ota, and a --diff-incremental ota...
Natesu53 said:
I managed to capture a full ota, and a --diff-incremental ota...
Click to expand...
Click to collapse
well, would youliek to share your capture or you just gonna flaunt it? lol.. and were you able to achieve root and succesful boot thereafter ?
DrScrad said:
well, would youliek to share your capture or you just gonna flaunt it? lol.. and were you able to achieve root and succesful boot thereafter ?
Click to expand...
Click to collapse
Yes sir
I was able to capture ota extract the "payload.bin" get the boot image patched it with magisk app . Then I flashed it using fastboot on the computer.
I booted up the device installed root checker and it worked.
Natesu53 said:
I booted up the device installed root checker and it worked.
Click to expand...
Click to collapse
And this was android 12? I'm assuming you had to disable vbmeta as well yeah?
My only question to you... , but that's why I'm here . Is do you correctly have a nord n20 GN2200, and if so does your device turn on properly. Is it bricked .
DrScrad said:
And this was android 12? I'm assuming you had to disable vbmeta as well yeah?
Click to expand...
Click to collapse
Yes I disabled vbmeta
And yes it was android 12
My OnePlus is booting just fine. How'd you go about capturing that ota BTW
Natesu53 said:
My only question to you... , but that's why I'm here . Is do you correctly have a nord n20 GN2200, and if so does your device turn on properly. Is it bricked .
Click to expand...
Click to collapse
Currently** corrections
Natesu53 said:
Currently** corrections
Click to expand...
Click to collapse
I'm trying to show you but it won't let me post the pics cause too much too process with xda
Natesu53 said:
I'm trying to show you but it won't let me post the pics cause too much too process with xda
Click to expand...
Click to collapse
Hit me up on telegram
Or hell just email me with what you're trying to post
[email protected]
Images
So basically you connect your phone to the computer. Make sure you have automatic updates shutoff. Start downloading the update, but don't download it all the way . Pause it after 15 seconds. Type " adb logcat > ota.txt " without quotation . In you platform tools folder there should be a file called it's.txt open it . In the search type " googleapis " and you will find a httpslink.zip copy it and paste it in your browser it should start downloading. Extract the downloaded file. The payload will be in the extracted folder.
Ota.txt** not it's.txt
I have steps for you on how to extract the payload.bin file with payload_dumper-master... Once you got a capture of your ota
Also I have telegram, but I need to download it.
I sent message on telegram
Platform-tools directory in terminal type that command*
Also I had android 11 at first . I did end up bricking my phone trying to install a unofficial TWRP. I thought I was never get my phone back working then I tried to flash different boot.img . I flashed it with different ppls images. Still nothing. Kept doing research. Flashed it more had a phone that finally turned on , but no wifi .... I flashed the October patch android 11 flashed vbmeta , boot image , system.image system_etc.img . I finally was able to turn on my phone have wifi. I noticed there was a new update . I was just gonna download the update to fully get my phone back to normal, but this was my chance to root it cause all the software lined up . I figured out how to capture ota . I capture the ota to my version of the new update. I downloaded my update for Android 12. I patched the boot.img . BOOM flashed it phone successfully rooted . New update to Android 12 and root.
So my phone is currently rooted on the android 12 , but there is a new update . What I'm trying to figure out is how to update it. It seems you can only get the boot.img with full ota . With be android 11 at first . Android 12 was a full ota. Since I'm on android 12 there is a new update, but it's not a full ota . It's a incremental meaning not all the software is getting modified. I did manage to capture my incremental update , and you'll know it's not a full ota if it's only like 100mb. full ota are like 4gb . So I have the payloads for both updates. I'm trying to combine/extract both payload.bins boot.img combine them together to have a new updated root . My phone is still rooted properly . I would just like to stay up to date.
Natesu53 said:
I'm trying to show you but it won't let me post the pics cause too much too process with xda
Click to expand...
Click to collapse
I could definitely use a copy of the recent OTA mine is soft bricked right now. in the boot_b. in boot_a I flashed twrp to boot, the touchscreen doesnt work so i use my mouse on it.
DrScrad said:
My OnePlus is booting just fine. How'd you go about capturing that ota BTW
Click to expand...
Click to collapse
Start the OTA & then logcat - link will be in there
nam*eerf said:
I could definitely use a copy of the recent OTA mine is soft bricked right now. in the boot_b. in boot_a I flashed twrp to boot, the touchscreen doesnt work so i use my
Click to expand...
Click to collapse
nam*eerf said:
I could definitely use a copy of the recent OTA mine is soft bricked right now. in the boot_b. in boot_a I flashed twrp to boot, the touchscreen doesnt work so i use my mouse on it.
Click to expand...
Click to collapse
Umm what android version are you on , and what model . I could possibly upload the images for you to flash. , But my theory is you have to flash all the images on both slots to get it back working . If you're interested lmk.
Like system.img boot.img vendor.img modem.im ect... All the core images
Yes I believe it is possible. It's like getting a new update. And I have it all extracted from the payload bin. I check Here every so often if anyone interested. Like every image
Gotta flash all them so they all line up
Don't wanna just post anything and someone bricks there phone. But if your phone is already bricked , them it don't hurt to try.
I don’t usually post I just kinda hang back and read but I have an n20 gn2200 that I bricked trying to get rw on the system. I have tried so many combinations of flashing this that and the other that I don’t really know what firmware I’ve downloaded anymore. I know I was on 12 before I crashed the phone and was going to try getting twrp on my slot b partition but haven’t got there. If you have flashable imgs for android 12 I’ll give them a shot. Don’t mind trying it out like you said can’t hurt right
I got you . And the thing about twrp . You gotta flash it to your recover.img. it replaces your recovery. I've flashed it to my boot.img , and that's what bricked my phone.
And Nord doesn't have an official twrp that works. And I'm not seeing any recovery.img partitions.
Once I upload to Google drive . I will upload the link to all the images for download. I just need set my computer down and let them upload it'll take a lil time .
Uploading...
I've managed to figure out how to modify partitions and flash them. Like anyone interested in following along with this new project I'm working on. Like I mounted my_product.img to my computer edited some files deleted the carrier boot animations . If you try to mount it it'll mount, but it won't let you edit or delete files. OnePlus partitions are erofs not ext2, ext3, or ext4. Erofs is a read only file system I've came across this program that converts it to ext2. I was able to mount it I edited some files deleted some files. Flashed it .it flashed without a problem. The original my_product.img was like 300 mb. When it got converted it was like 600mb. So I deleted the carrier boot animations, and it reverted to the OnePlus boot animation. When I deleted the OnePlus boot animation it reverted to a stock android boot animation. And when I use a root explorer on the phone it allows me to create folders delete files. So the my_product which contains the boot animations flashed without a problem. So I did the same thing to system.img it lets me convert it edit files. When I go to flash it. I get an error. " fastboot flash system systemsu.img" the error says " invalid sparse file format at header magic Resizing 'system_a' FAILED (remote: 'not enough space to resize partition')". the original system.img was like 700mb then it changed to 1.5 gb once I converted it. If there is a way to reduce the size of the partition it it'll work . Or if you increase the size available, so you don't get an error.