Related
Can someone please help me. I just rooted the Samsung fascinate and had a problem with installing CWM. I flashed it via rom manager and it wouldnt let me do a nandroid so I then installed the CWM red via odin and was able to make my nandroid backup fine.
I wanted to theme the phone.apk gradient backgrounds and did so using ninjamorph. I put in my new background files and rebooted and everything was fine. The phone.apk would call out but when I would end a call it would force close. I decided I wanted to restore my backup so via rom manager I selected reboot into recovery. The phone rebooted and got stuck at the Samsung Logo screen and has been.
Ive pulled the battery and tried to boot again normall but it remains stuck at the logo. I let the phone sit for over 30 min and nothing happened. Am I bricked? If so, how do I fix the phone? I just need to get into recovery to restore my nandroid backup. Please someone help?
Sorry if this is a stupid question but did you already try holding volume up and down after pulling the battery and holding power?
Sent from my SCH-I500 using XDA Premium App
dgwood12 said:
Can someone please help me. I just rooted the Samsung fascinate and had a problem with installing CWM. I flashed it via rom manager and it wouldnt let me do a nandroid so I then installed the CWM red via odin and was able to make my nandroid backup fine.
I wanted to theme the phone.apk gradient backgrounds and did so using ninjamorph. I put in my new background files and rebooted and everything was fine. The phone.apk would call out but when I would end a call it would force close. I decided I wanted to restore my backup so via rom manager I selected reboot into recovery. The phone rebooted and got stuck at the Samsung Logo screen and has been.
Ive pulled the battery and tried to boot again normall but it remains stuck at the logo. I let the phone sit for over 30 min and nothing happened. Am I bricked? If so, how do I fix the phone? I just need to get into recovery to restore my nandroid backup. Please someone help?
Click to expand...
Click to collapse
If you are unable to get into recovery, then you will have to odin back to stock.
As stated above, holding vol up + vol down + power (Until you see the logo pop up) should take you there. If that doesn't work, Odin is now your new best friend.
ClockWorkMod 3.x.x Doesn't Play Well with the Samsung Fascinate
USB Port Got Confused
I am having much the same problem. I still haven't gotten a working solution. But, I thought I'd put together in one place all the Information that I've found so far regarding this problem from other users on the XDA Forums. The USB Port on my Fascinate seems to have gotten confused. When I connect to Computer, the Computer Doesn't Recognize the Fascinate. And when I connect via USB to an AC Outlet and Hold Volume Down key, only then can I access the Yellow DownLoading Screen that Odin needs. However, the Computer still won't Recognize the Fascinate, so I Can't get Odin to find the Fascinate to do a return to a Stock ROM.
My Facinate seems to need ClockWorkMod Version 2.5.1.2, but I can't access the USB Port to Change this, so the StartUp Screen Shows "SAMSUNG", unless I use the "Recovery_UpDate.zip" made with ClockWorkMod, but then Hangs at the ClockWorkMod Logo, (the Hat and Orange Circle). Reasons for this hang are given below. Any Help you send me also would also be appreciated.
The USB Port seemed to have gotten Confused when the Computer wanted to Install Verizon Wireless Software Utility Application for Android - Samsung to make my Computer Communicate better with the Fascinate and I Declined this option. I have more than one Computer and on the other Computer I Accepted, and although I don't use the VZ Media Manager, it didn't interfere with the Cell Phone Communicating with the Computer, and must be a Help.
All of the Following is Copied, so when it reads, "in my testing" or "I highly recommend", please understand that these are not my Words or Expertise, but are copied from the Link Below the Paragraph. Also, I found that if the Screen Freezes on ReBoot that if the Menu Button is Pushed, {Bottom Left Corner ~ Pop-Up Menu Icon ~ Looks like Paper Coming out of a Printer), it will Toggle to another Menu to see the UnderLying Reasons for Incompletion, (ie... Signature Not Recognized, etc.).
* * * * *
ClockworkMod Version 3.0.2.5
Please note: Some People have had the Samsung Recovery appear after this Flash, and in my testing, in some circumstances, the Stock Kernel can actually Flash back the Stock Recovery. Due to this, I highly recommend that anyone flashing the new CWM with this Flash, please also Flash my Clean Kernel, located here: Clean Kernel EC05 1.03d thread Also note, that the One Click Version of this should not have this problem, since it takes away the ability of the Stock Kernel to Flash the Samsung Recovery.
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
ROM Manager
{New Users ~ ROM Manager is the Name of an Application that can be DownLoaded from the Android Market that can Flash ClockWorkMod}.
Samsung Users: You must Flash a ClockWork Compatible Kernel First (see XDA forums)
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
Note, using Reboot Recovery or ADB Reboot Recovery will take you to a "Stock" Recovery. Simply Apply the UpDate.zip on your SD card and ClockWorkMod will start up. (This method is better known as FakeFlash)
http://forum.xda-developers.com/showthread.php?t=788251
* * * * *
ClockWorkMod Version 2.5.1.2 ~
At the moment the Latest Versions of ClockWorkMod Recovery are Orange with Build Numbers 3.x.x. Unfortunatley this CAN NOT be used because in order to install any Flashable .zip file a script of code is required to direct the installation. At the moment almost everything written for Fascinate has been written in a language called Amend. The most recent version 3.x.x ONLY Accepts a Language called Edify, in Previous Versions of Clockwork (anything under 3.x.x) were Compatible with both Amend and Edify.
http://forum.androidcentral.com/ver...-clockworkmod-recovery-w-screen-captures.html
* * * * *
ClockWorkMod Compatible Kernel and ROM Manager Support
[Recovery] ClockWorkMod 3.0.2.5 Upgrade RFS - Ext4 Compatible!!! - XDA-Developers
CWM3.0.2.5.zip
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
CWM3.0.2.5_Reboot_Recovery_&_Rom_Manager
DRockstar.Clean.Kernel.EC05.v1.04.zip
[Kernel][GPL]Clean Kernel Ec05 V1.04 Cwm3.0.2.5 Reboot Recovery & Rom Manager!!! - XDA-Developers
http://forum.xda-developers.com/showthread.php?t=1053252
* * * * *
How to Restore you Samsung Fascinate to Factory?
http://www.nyneaxis.com/2010/11/how-to-restore-you-samsung-fascinate-to-factory/
JollyChollie said:
USB Port Got Confused
I am having much the same problem. I still haven't gotten a working solution. But, I thought I'd put together in one place all the Information that I've found so far regarding this problem from other users on the XDA Forums. The USB Port on my Fascinate seems to have gotten confused. When I connect to Computer, the Computer Doesn't Recognize the Fascinate. And when I connect via USB to an AC Outlet and Hold Volume Down key, only then can I access the Yellow DownLoading Screen that Odin needs.
My Facinate seems to need ClockWorkMod Version 2.5.1.2, but I can't access the USB Port to Change this, so the StartUp Screen Shows "SAMSUNG", unless I use the "Recovery_UpDate.zip" made with ClockWorkMod, but then Hangs at the ClockWorkMod Logo, (the Hat and Orange Circle). Reasons for this hang are given below. Any Help you send me also would also be appreciated.
The USB Port seemed to have gotten Confused when the Computer wanted to Install Verizion Wireless' Verizon Wireless Software Utility Application for Android - Samsung to make my Computer Communicate better with the Fascincate and I Declined this. I have more than one Computer and on the other Computer I Accepted and although I don't use the VZ Media Manager, it didn't interfer with the Cell Phone Communicating with the Computer and must be a Help.
All of the Following is Copied, so when it reads, "in my testing" or "I highly recommend", please understand that these are not my Words or Expertise, but are copied from the Link Below the Paragraph.
* * * * *
ClockworkMod Version 3.0.2.5
Please note: Some People have had the Samsung Recovery appear after this Flash, and in my testing, in some circumstances, the Stock Kernel can actually Flash back the Stock Recovery. Due to this, I highly recommend that anyone flashing the new CWM with this Flash, please also Flash my Clean Kernel, located here: Clean Kernel EC05 1.03d thread Also note, that the One Click Version of this should not have this problem, since it takes away the ability of the Stock Kernel to Flash the Samsung Recovery.
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
ROM Manager
Samsung Users: You must Flash a Clockwork Compatible Kernel First (see XDA forums)
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
Note, using Reboot Recovery or ADB Reboot Recovery will take you to a "Stock" Recovery. Simply Apply the UpDate.zip on your SD card and ClockWorkMod will start up. (This method is better known as FakeFlash)
http://forum.xda-developers.com/showthread.php?t=788251
* * * * *
ClockWorkMod Version 2.5.1.2 ~
At the moment the Latest Versions of ClockWorkMod Recovery are Orange with Build Numbers 3.x.x. Unfortunatley this CAN NOT be used because in order to install any Flashable .zip file a script of code is required to direct the installation. At the moment almost everything written for Fascinate has been written in a language called Amend. The most recent version 3.x.x ONLY Accepts a Language called Edify, in Previous Versions of Clockwork (anything under 3.x.x) were Compatible with both Amend and Edify.
http://forum.androidcentral.com/ver...-clockworkmod-recovery-w-screen-captures.html
* * * * *
ClockWorkMod Compatible Kernel and ROM Manager Support
[Recovery] ClockWorkMod 3.0.2.5 Upgrade RFS - Ext4 Compatible!!! - XDA-Developers
CWM3.0.2.5.zip
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
CWM3.0.2.5_Reboot_Recovery_&_Rom_Manager
DRockstar.Clean.Kernel.EC05.v1.04.zip
[Kernel][GPL]Clean Kernel Ec05 V1.04 Cwm3.0.2.5 Reboot Recovery & Rom Manager!!! - XDA-Developers
http://forum.xda-developers.com/showthread.php?t=1053252
* * * * *
How to Restore you Samsung Fascinate to Factory?
http://www.nyneaxis.com/2010/11/how-to-restore-you-samsung-fascinate-to-factory/
Click to expand...
Click to collapse
You Know all of those links are for Epic 4g right??
Fascinate doesn't like Rom Manager as well.
For OP
Just Odin back to Stock and work your way up.
JollyChollie said:
USB Port Got Confused
I am having much the same problem. I still haven't gotten a working solution. But, I thought I'd put together in one place all the Information that I've found so far regarding this problem from other users on the XDA Forums. The USB Port on my Fascinate seems to have gotten confused. When I connect to Computer, the Computer Doesn't Recognize the Fascinate. And when I connect via USB to an AC Outlet and Hold Volume Down key, only then can I access the Yellow DownLoading Screen that Odin needs. However, the Computer still won't Recognize the Fascinate, so I Can't get Odin to find the Fascinate to do a return to a Stock ROM.
My Facinate seems to need ClockWorkMod Version 2.5.1.2, but I can't access the USB Port to Change this, so the StartUp Screen Shows "SAMSUNG", unless I use the "Recovery_UpDate.zip" made with ClockWorkMod, but then Hangs at the ClockWorkMod Logo, (the Hat and Orange Circle). Reasons for this hang are given below. Any Help you send me also would also be appreciated.
The USB Port seemed to have gotten Confused when the Computer wanted to Install Verizon Wireless Software Utility Application for Android - Samsung to make my Computer Communicate better with the Fascinate and I Declined this option. I have more than one Computer and on the other Computer I Accepted, and although I don't use the VZ Media Manager, it didn't interfere with the Cell Phone Communicating with the Computer, and must be a Help.
All of the Following is Copied, so when it reads, "in my testing" or "I highly recommend", please understand that these are not my Words or Expertise, but are copied from the Link Below the Paragraph.
* * * * *
ClockworkMod Version 3.0.2.5
Please note: Some People have had the Samsung Recovery appear after this Flash, and in my testing, in some circumstances, the Stock Kernel can actually Flash back the Stock Recovery. Due to this, I highly recommend that anyone flashing the new CWM with this Flash, please also Flash my Clean Kernel, located here: Clean Kernel EC05 1.03d thread Also note, that the One Click Version of this should not have this problem, since it takes away the ability of the Stock Kernel to Flash the Samsung Recovery.
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
ROM Manager
{New Users ~ ROM Manager is the Name of an Application that can be DownLoaded from the Android Market that can Flash ClockWorkMod}.
Samsung Users: You must Flash a ClockWork Compatible Kernel First (see XDA forums)
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
Note, using Reboot Recovery or ADB Reboot Recovery will take you to a "Stock" Recovery. Simply Apply the UpDate.zip on your SD card and ClockWorkMod will start up. (This method is better known as FakeFlash)
http://forum.xda-developers.com/showthread.php?t=788251
* * * * *
ClockWorkMod Version 2.5.1.2 ~
At the moment the Latest Versions of ClockWorkMod Recovery are Orange with Build Numbers 3.x.x. Unfortunatley this CAN NOT be used because in order to install any Flashable .zip file a script of code is required to direct the installation. At the moment almost everything written for Fascinate has been written in a language called Amend. The most recent version 3.x.x ONLY Accepts a Language called Edify, in Previous Versions of Clockwork (anything under 3.x.x) were Compatible with both Amend and Edify.
http://forum.androidcentral.com/ver...-clockworkmod-recovery-w-screen-captures.html
* * * * *
ClockWorkMod Compatible Kernel and ROM Manager Support
[Recovery] ClockWorkMod 3.0.2.5 Upgrade RFS - Ext4 Compatible!!! - XDA-Developers
CWM3.0.2.5.zip
http://forum.xda-developers.com/showthread.php?t=1074324
* * * * *
CWM3.0.2.5_Reboot_Recovery_&_Rom_Manager
DRockstar.Clean.Kernel.EC05.v1.04.zip
[Kernel][GPL]Clean Kernel Ec05 V1.04 Cwm3.0.2.5 Reboot Recovery & Rom Manager!!! - XDA-Developers
http://forum.xda-developers.com/showthread.php?t=1053252
* * * * *
How to Restore you Samsung Fascinate to Factory?
http://www.nyneaxis.com/2010/11/how-to-restore-you-samsung-fascinate-to-factory/
Click to expand...
Click to collapse
If your phone is rooted, ODIN your way to this ROM.
http://forum.androidcentral.com/ver...tom-roms-w-root-clockwork-updated-3-25-a.html
From there you can be voodoo converted or not, your choice. I would choose to be converted, FYI. From there you can upgrade your CWM using ODIN. Here is the latest CWM that I use.
http://forum.xda-developers.com/showthread.php?t=1046905
Now from there, DON'T use ROM Manager. I will say it again so you get the point. DON'T use ROM Manager. Download all your ROMs or Kernels for the Fascinate here and read about them. You will learn a lot and knowledge is power. I know I have learned a lot and now wish I didn't pay for ROM manager when I got started in this fun game.
A list of all the ROMs and Kernels is here.
http://forum.xda-developers.com/showthread.php?t=1013312
The Fasinate has two main types of ROMS. AOSP and Touchwiz. Touchwiz is what the phone was shipped with and has a lot of development done on it. It is favored a lot because everything generally works. AOSP is faster and Google's original source code modified to work on our phones. Not everything works however. We do have great developers that work on our phones and they have a great IRC channel to you can ask questions on about their ROMs.
This thread is from march..
good day.
chopper the dog said:
This thread is from march..
good day.
Click to expand...
Click to collapse
The thread originally is, however, the recent post has another person asking the same question because he couldn't get the answer he needed.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Motorola Droid 2 Global, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0-DROID2WE
Download: link
Mirror: link
MD5sum: 96fc1288449d9f6dd468efd4fc509f39
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
First!!
Haha,
Do we need to flash to Gingerbread .SBF first??
Or is going from stock rooted to this ok?
Bugs so far:
**Edit. Went fine going from stock. However I do not get Any usb mode connection when connecting the usb cable??
-Alt Lock on keyboard does not work?
FYI - the link to the office post is broken
what the hell!!
update complate.. but
I korean korea use cdma 3G
go to cdma. forace working airplane mode and err phone
what the hell!!
USB not working
Just installed and USB is not working for me either. Anyone found a solution for this?
stays stuck at m logo for me
Me two. Red M, stuck. I didn't do a factory reset though (step 4). How do I boot into recovery?
Edit: Got into regular recovery, factory reset, wiped cache, still stuck on red M. Did a nandroid backup before attempting to install, but I can't get into CWM to restore it.
HELP!
None of the info on the CM7 website seems to say they have a version for the D2G(WE). I sure hope we do get some CM7 love.
Overall I am happy with Venus for now....
Installed via rom manager, wiped data, and dalvik cache, and it threw me into a bootloop. cannot boot into stock recovery to flash the backup
what button combo will boot me into CWM, or what can i flash via bootloader
ive never had problems with htc or samsungs, this is the first moto ive worked on, its a friends.
Windst said:
Installed via rom manager, wiped data, and dalvik cache, and it threw me into a bootloop. cannot boot into stock recovery to flash the backup
what button combo will boot me into CWM, or what can i flash via bootloader
ive never had problems with htc or samsungs, this is the first moto ive worked on, its a friends.
Click to expand...
Click to collapse
You can always flash the .sbf stock image using Rsd Lite.
2.4.29 SBF Download - http://www.megaupload.com/?d=MD5K1YY8
RSDlite 5.0 DOWNLOAD http://www.megaupload.com/?d=BCA2LDFX
Pass: alabama
If you are not familiar on how to use RSDLite here is a brief overview
Method 1: While phone is on
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF
Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete.
Method 2: While phone is off
To manually put your device in bootloader mode:
Turn off device
press and hold the up and down volume buttons
power on device (continue to hold the up and down volume buttons)
wala - you are in bootloader mode
Launch RSDLite (make sure device appears in window)
Select SBF
Start
Usb enable
texas-saluki said:
Just installed and USB is not working for me either. Anyone found a solution for this?
Click to expand...
Click to collapse
Good for those who do not recognize it as mass storage, yesterday restart the cell with the data cable connected to the computer and when I start my usb recognized as mass storage. Hopefully this info will serve. but hopefully the developers fix this little problem. In the rest of me is going great rom.
Are you all sure this is a rom for driod 2 global and not droid 2 because if you look on CyanogenMod web site there is no mention of droid 2 global. This rom is for 2.2 and not 2.3.
I wouldnt update to this rom if you are a D2G until this is confirmed with CyanogenMod people.
kurpter said:
Are you all sure this is a rom for driod 2 global and not droid 2 because if you look on CyanogenMod web site there is no mention of droid 2 global. This rom is for 2.2 and not 2.3.
I wouldnt update to this rom if you are a D2G until this is confirmed with CyanogenMod people.
Click to expand...
Click to collapse
Dev thread: http://rootzwiki.com/showthread.php?3546-DEV_THREAD-Droid-2-Global-CM7-with-Gingerbread-Leak-Kernel
Sorry, but even searching through the internet there is one point I'm still missing..
has the D2G bootloader been unlocked with the official GB update (like the Atrix) or not?
If you install using rom manager you have to install the recovery from rom manager which in my experience over-rides boot strap. With that said, I was unable to use the backup made with the CWM recovery nandroid. When installing via rom manager, it doesnt seem to wipe correctly and I was stuck at the "M" logo. I pulled the batter, held power and x until the little droid symbol showed up then hit the search button to boot into stock recovery. Wiped data and cache from there and CM booted up just fine.
The problem I am having is once I am in CM I can no longer use Boot strap recovery and make nandroids so essentially I am stuck. The rom manager cwm doesnt create usable nandroids and once i reinstall bootstrap in CM and flash bootstrap recovery I end up stuck at the M symbol at which wiping in stock recovery will not allow me to boot back up and have to SBF all the way back to stock
Something is broke but I cannot determine what.
I tried installing this and got stuck on red M.
How does one access CWM? all my attempts have taken me to stock recovery....
Can somebody tell me if Cyanogen is installed with its own kernel or if it runs on Motorola signed Gingerbread kernel?
In other words.. I ask again, is D2G bootloader unloked like Droid and Atrix or not?
phoenixs4r said:
I tried installing this and got stuck on red M.
How does one access CWM? all my attempts have taken me to stock recovery....
Click to expand...
Click to collapse
Hate to be "That guy" and quote myself, but since this wasn't my phone, I couldn't waste a bunch of time. I had to SBF back to stock and do the OTA back to gingerbread. I don't know what went wrong exactly, but I couldn't get into recovery. Maybe cause I updated recovery via rom manager? I don't quite know.
as a heads up, the rootzwiki link is for the build using the GB kernel (leaked, or ota), and the one from the official cmod site (listed under "cdma_droid2we" on the cyanogen download site, sorry cant post links til i get 8 posts!) is using the froyo codebase. if you're on .330 or below, use the offical cm build, if you've already got gingerbread from moto, then use the rootzwiki dev thread version!
This is for the froyo kernel, if you want to use it you'll need to sbf back to 2.2. Although I'd would say go to the rootzwiki thread for the gingerbread version and use that, it works a lot better, except for gsm is flaky. Oh and if you have GB you can just use Rom Toolbox and download it there.
I want to give the awesome Android 5.1 experience to every Galaxy S2 user. I am here to help, so if you need help just post a new replay.
I will upload all I can on my own Google Drive, so when the Link is down someday send me a message.
This thread is ONLY for the Galaxy S2 GT-i9100 modell! Check it by going into settings -> about phone -> modell!
I am here to help, so if you have questions or problems post a reply here and I will give my best to help you.
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research about all the things I tell you
before doing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
Pre-requisits:
A1. Download Odin 3.07: HERE
A2. Download CWM Recovery:
A3. Download Phone Drivers [most not needed so only download when your phone doesn' get detected from your PC]: COMING SOON!
B1. [Optional - only if you need root on your Stock Rom] SuperSu: HERE
B2. [Optional - only if you don't want to have a so called Triangle which says that your device doesnt have OFFICIAL software anymore, check more!] Triangle Away: HERE
C1. Download your Android 5.1 Rom, here you can find some, but there will be some more:
- CyanogenMod 12.1 Unofficial [Most known Rom]: HERE
- CyanogenMod 12.1S Unofficial [Much more features from OnePlus One and more]: HERE
- Nameless Rom [Smoothes of all, and for me the stablest]: HERE
- Resurrection Remix Official [Most features of all these Roms, very smooth]: HERE
- OmniRom Unofficial [Simple but clever ]: HERE
C2. [Optional but really recommended!] Download Google Apps: HERE [TAKE ONE FOR ANDROID 5.1!]
C3. [Optional!!!] Download Apollo Custom Kernel (VERSION 8!), this will also bring TWRP Recovery to your phone (what I do prefer much than CWM):HERE and don't forget to install the Config App on your PHONE: HERE
A. So first let us start with giving you a new Recovery. I decided to show you because this is the most known one and there is no TWRP for it.
- Go to your PC and open Odin307.zip, now extract it somewhere and open Odin3 v.3.07.exe
- Take your S2 and bring it in Recovery Mode by shutting it down and then press Power+Home+Volume Down
- Now take your i9100 Galaxy S2 and connect it to PC with a USB Cable [it is recommended to use the cable which was delivered with the device]. Odin should now says something at ID:COM and under message should stand: "Added!".
- Check in Odin if ONLY THE FOLLOWING is crossed under Option: - Auto Reboot; F. Reset Time! NOTING MORE
- Now click in Odin on PDA and search your downloaded file called something like: "CWM-KitKatCompatible-i9100.tar"
- Let Odin check the md5 and after this is finished press "Start". Give your phone some time (up to 10 minutes) and wait until there is "Passed" in Odin.
- Your device has now lost garantee (only when you don't use Triangle Away) and you have a custom recovery
B. [OPTIONAL!] When you want to use Triangle Away or need root a last time on your Stock Firmware you have to root it first.
- Open AutoRoot S2 i9100.zip, now extract it somewhere and open Odin3 v.3.07.exe from inside the folder
- Take your S2 and bring it in Recovery Mode by shutting it down and then press Power+Home+Volume Down
- Now take your i9100 Galaxy S2 and connect it to PC with a USB Cable [it is recommended to use the cable which was delivered with the device]. Odin should now says something at ID:COM and under message should stand: "Added!".
- Now click in Odin on PDA and search your downloaded file called something like: "CF-Auto-Root-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
- Let Odin check the md5 and after this is finished press "Start". Give your phone some time (up to 10 minutes) and wait until there is "Passed" in Odin
If you now want to use Triangle Away read more at @Chainfire 's Official XDA Thread, linked at pre requisits!
C. Now we are at the Step to get your new Android Vanilla 5.1 Software. Go to the threads upside and take the Rom you most like, if you need help to decide I can help you
I would recommend you to use Resurrection Rom because for my S2 this was the smoothes one.
- Copy your downloaded Rom.zip and Gapps.zip to your micro SD Card from your S2
- Shut down your phone, then boot into Recovery by Holding Power+Home+Volume Up, release Power as soon as you see the "Samsung Galaxy S2 i9100" Logo, otherwise it will maybe reboot again.
- [Optional but recommended] You will see the TWRP Logo, then go to Backup and Restore and do a backup!
- Go to Factory Reset and do a factory reset, then go to wipe cache and wipe cache, then go to advanced and wipe Dalvik, then go to mounts and storage and wipe System, Data, Cache, boot and Internal Storage (default)
- Now go to install and choose you directoy where your downloaded zip's are, and choose your Rom, then press install again and choose your Gapps.zip and wait until it has finished
- [Optional] After finished installation go to Advanced and Wipe Dalvik again. Then reboot your phone.
Finished! You have now the newest Android 5.1 on your S2!
OPTINAL you can now install a custom Kernel but this is really OPTIONAL! First read something about custom kernels before doing so!
Download the zip and flash in Recovery, finished, then install the Config app on your phone. CHECK FIRST IF THE KERNEL WORKS FOR YOUR ROM! Apollo works for CyanogenMod, Resurrection Remix, the rest I don't know.
Please press THANKS if you find this Thread usefull!
-------------------------------
Also Check:
- How to Root Galaxy S6 SM-G920F: HERE
- How to Root and install Android 5.1 on i9300 Galaxy S3: HERE
- How to Root and install Android 5.1.X on i9505 Galaxy S4: HERE
RESERVED
RESERVED
Hallo I have a galaxy s2 model i9100 which was on stock official android 2.3.6 gingerbread and I upgraded it to CWM 12.1 ANDROID 5.1 Custom rom....and then got these bugs.....
1.....the BACK button, OPTIONS button dont work...also the MENU/HOME [middle] button works as back button. .....its not a hardware problem coz they worked very well on Gingerbread the previous rom
2....when I call some one...he doesnt hear me and I also dont hear him....its the same issue when I activate loud speaker or insert HEADSETS.....
ITS NOT A HARDWARE PROBLEM because things were working well when on official android 2.3.6 stock......and also all the speakers work well on other apps....also, people dont hear me during calls and yet the mic WORKS VERY WELL FOR VOICE and VIDEO RECORDING FOR OTHER APPS including camera and voice recorder.....BUT STILL PEOPLE DONT HEAR ME DURING CALLS......
I then took it back to official android 4.1.2 jellybean AND I STILL HAVE THE SAME ISSUES......STILL THE BUTTONS DONT WORK and also i dont hear people during calls and they dont hear me either......PLEASE HELP ME...this is a software problem.....I have tried factory reseting the phone and wiping all data on phone and still the same issue. ........AM NOT AN EXPERT TO ANDROID
THANKS....
[email protected]
Sent using XDA Free mobile app
can i root my SG S2 GT-I9100 with kingo root apk or farmaroot then flash cwm recovery from "Rom Manager" app ??
My Micromax A250 has the following issues(because of installing different custom ROMs):
1. Camera is not able to focus.
2. Proximity sensor not working properly.
3. I am not able to install ROM directly from phone as recovery mode not working.
While going to recovery mode, it is showing me the Recovery Menu. But nothing is working. I cannot even factory reset the
phone. On the screen dead Android is being displayed. Nothing is working in recovery mode.
I can still use my phone with all of the above issues.
I need a stable and working ROM or any other way to fix all(or any) of the above mentioned issues.
It can be a stock ROM or custom ROM but as if I cannot install with phone itself, I need ROM which can be installed with SP Tool or any other PC Tool.
I was thinking of installing Cyanogen ROM, is it available for MMX A250?
Full description to fix all the issues will be appreciated.
Please help me out.
Thank You in advance.
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
LineageOS (former CyanogenMod) is a free, community built, aftermarket firmware distribution of Android 10 (Ten) , which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.2.1-0 or newer needed)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage 17.1 Zip > Swipe
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.
What is working
Wifi
Sound
Bluetooth
S-Pen
Off Charging
ADB/MTP
RIL
IR
GPS
Open GApps
...
What is not working
Camera
...
Bugs/ other things
SELinux Permissive
...
Download
All Downloads
Notes:
- TWRP 3.2.1-0 or newer necessary
Changelog:
--Lineage--
20210320: Synced sources, fixed GPS, fixed boot from off-charging, many small improvements [clean install recommended]
20200207: fixed MTP/PTP, Rotation, Hotspot and Keystore, small changes [clean install recommended]
20200205: bringup
Credit: LineageOS Team, Maintainer and Valera1978
Kernel Source
XDA:DevDB Information
Unofficial LineageOS 17.1 for lt03lte, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 Bootloader/Modem
Version Information
Status: Beta
Created 2020-02-05
Last Updated 2021-02-20
<< Hi David <<
Thank you for 10 on our lt03lte *** SUPER ROM
: Cyclops:: Plač:
Please ask for repair of the camera - then it will be OK : Dobrý:
Thank you for the new build - anyone got gapps installed successfully? My device doesn't boot after pico or nano installation...
ROM + nano OGAPPS = BOOTLOOP after rebooting (
First boot after installing is OK.
realkot said:
ROM + nano OGAPPS = BOOTLOOP after rebooting (
First boot after installing is OK.
Click to expand...
Click to collapse
Same behaviour...not after first reboot but happens after a couple of reboot. I could re produce is it after a new install. Will restore to previous android. It looks extremely promising will continue testing
New build
New build
[clean install recommended]
Changelog:
- fixed MTP/PTP, Rotation, Hotspot and Keystore
- small changes
Download
great job
Thank you so much
Still stuck in boot logo after some time with gapps
disthomuc said:
Still stuck in boot logo after some time with gapps
Click to expand...
Click to collapse
did you try with the new built ?
For me it worked after the first install but then had died.
Reinstalling I don't have a bootloop but I can't proceed with the install.
I get stuck at the Google assistant - if I don't activate voice it gets stuck in a loop and if I use voice it recognises but does not proceed.
BTW - Is this already gapps or is this linage..?
Still - good to see this progressing and looking forward to some further grey hairs when this gets stuck...
garniemand said:
did you try with the new built ?
For me it worked after the first install but then had died.
Reinstalling I don't have a bootloop but I can't proceed with the install.
I get stuck at the Google assistant - if I don't activate voice it gets stuck in a loop and if I use voice it recognises but does not proceed.
BTW - Is this already gapps or is this linage..?
Still - good to see this progressing and looking forward to some further grey hairs when this gets stuck...
Click to expand...
Click to collapse
yes
so it seems that we need to wait for a less buggy gaaps as linage seems to work...
garniemand said:
so it seems that we need to wait for a less buggy gaaps as linage seems to work...
Click to expand...
Click to collapse
Not sure if it is google apps related
For me nano gaaps and the new build worked perfectly.
I wiped everything except micro sd. Install both at once and reboot without wiping again.
TWRP 3.3.0-0
---------- Post added at 04:47 PM ---------- Previous post was at 04:19 PM ----------
Update: after rebooting into recovery mode to check the twrp version the systems ends in endless booting
made a wipe again and now it works for now. Won´t rebbot again ..
Yup nano did the trick for me as well.
For now it seem to work...
However - Let's see whether it still works tomorrow...
Tell me, does GPS work?
Rick148 said:
Tell me, does GPS work?
Click to expand...
Click to collapse
Yes, it works. But a reboot is not recommended. Need to check the battery drainage
## Hi David ##
Please ask for repair of the * Camera & GPS* - then it will be.
Great news to hear about developing a ROM based on Android 10 on the Note p605. Thanks for your work, as soon as I can I will try it.
Anyone got an idea why palm rejection is not working?
Everytime I place my hand on the screen and try to write in an app (like OneNote, Papyrus, etc...) using the S-Pen, my input is not recognized.
Anyone else with this issue?
hunter_sephiroth said:
Anyone got an idea why palm rejection is not working?
Everytime I place my hand on the screen and try to write in an app (like OneNote, Papyrus, etc...) using the S-Pen, my input is not recognized.
Anyone else with this issue?
Click to expand...
Click to collapse
Palm rejection works for me. At least in Adobe SketchBook.
What doesn't work is rebooting, which sucks, because AdAway and other tools can't be used.