Hi,
I bring a method to root this phone, ive tried with an Asian device but i know is working with South American branch as well.
-Download TWRP for SM-J105B.(link in the post).
-Download SuperSu.(link in the post).
-Enable developer options.
-Enable OEM unlock.
-Enter download mode (home+volume down+power)
-Flash with odin the SM-J105B_TWRP.tar recovery (option AP).
-Enter recovery (home+volume up+power).
-Flash SUPERSU_v276.zip.
-Reboot.
That's all
This method will install su in a boot partition(systemless).
¡ALERT!
Don't modify any file in a system partition or you will brick your phone because system is verified in each boot.
Regards,
Thanks. I'll try it when I'm home ??
Hi, thanks for the method. Unfortunately it wouldn´t work on mine. Odin says it´s a success, but then when I try to get to recovery, it´s just the default android recovery.
Konovolov said:
Hi, thanks for the method. Unfortunately it wouldn´t work on mine. Odin says it´s a success, but then when I try to get to recovery, it´s just the default android recovery.
Click to expand...
Click to collapse
I think you need to boot the device directly into the flashed recovery, and not into the system and them into the recovery. It probably flashes the stock recovery after verifying the installed recovery is not the original one.
kryz said:
Hi,
I bring a method to root this phone, ive tried with an Asian device but i know is working with South American branch as well.
-Download TWRP for SM-J105B.(link in the post).
-Download SuperSu.(link in the post).
-Enable developer options.
-Enable OEM unlock.
-Enter download mode (home+volume down+power)
-Flash with odin the SM-J105B_TWRP.tar recovery (option AP).
-Enter recovery (home+volume up+power).
-Flash SUPERSU_v276.zip.
-Reboot.
That's all
This method will install su in a boot partition(systemless).
¡ALERT!
Don't modify any file in a system partition or you will brick your phone because system is verified in each boot.
Regards,
Click to expand...
Click to collapse
hey man should i keep enabling the oem unlocking .. i tried disabled it after succesfully rooted .. but i was frp locked .. dont have other option but to install firmware
How did you flash recovery.img by Odin??? May be you used ADB???
Sir its not working when i go to recovery mode the twrp recovery doesnt appear
VarunSelvaraj said:
Sir its not working when i go to recovery mode the twrp recovery doesn't appear
Click to expand...
Click to collapse
hold it longer, at first try it was not trwp recovery mode but when i hold it longer it finally enters the trwp recovery mode, or you maybe you don't have trwp recovery installed on your phone, i finally root my SE Asian j106b :good:
Sempak_Berdarah said:
hold it longer, at first try it was not trwp recovery mode but when i hold it longer it finally enters the trwp recovery mode, or you maybe you don't have trwp recovery installed on your phone, i finally root my SE Asian j106b :good:
Click to expand...
Click to collapse
thanks working for me
Thanks..it works.. :good:
sir my divice is the samsung galaxy j1 mini prime sm-j106b/ds
its not working the twrp recovery before unlock my phone please send the link for unlock my device
It worked for an SM-J106H
Thanks!
alter help!
kryz said:
Hi,
I bring a method to root this phone, ive tried with an Asian device but i know is working with South American branch as well.
-Download TWRP for SM-J105B.(link in the post).
-Download SuperSu.(link in the post).
-Enable developer options.
-Enable OEM unlock.
-Enter download mode (home+volume down+power)
-Flash with odin the SM-J105B_TWRP.tar recovery (option AP).
-Enter recovery (home+volume up+power).
-Flash SUPERSU_v276.zip.
-Reboot.
That's all
This method will install su in a boot partition(systemless).
¡ALERT!
Don't modify any file in a system partition or you will brick your phone because system is verified in each boot.
Regards,
Click to expand...
Click to collapse
heyy guys if you can't install twrp because of FRP Lock disable it by turning off the "verified via usb" on developer options. if you stock on download mode watch this video to bypass you gmail account >> the right way To remove Google account FRP Lock On samsung (search that in youtube)
Vibratelord said:
heyy guys if you can't install twrp because of FRP Lock disable it by turning off the "verified via usb" on developer options. if you stock on download mode watch this video to bypass you gmail account >> the right way To remove Google account FRP Lock On samsung (search that in youtube)
Click to expand...
Click to collapse
Do you have the TWRP for SM-J106B?
If you do have then please send me the link.
not working on me install twrp is a success but when booting to recovery its not working its like twrp is not installed at all.. thanks hope you can help me guys
vergel21 said:
not working on me install twrp is a success but when booting to recovery its not working its like twrp is not installed at all.. thanks hope you can help me guys
Click to expand...
Click to collapse
I had the same problem but i managed to resolve the issue. I flashed via ODIN the recovery and when the device rebooted I imediately remove the battery and disconnect the usb cable. Then I entered in recovery mode and it worked.
Hope this helps.
I succeeded with this tutorial and worked with normal beckup / restore, install costomrom thanks for the developer and keep working on you: good:
your TWRP works on my phone, thanks.
but my first attempt was with the rooting tutorial for J106B on rootmygalaxy dot net
there is a different custom TWRP for J106B
it doesn't work on my phone, but maybe that when one doesn't work, the other do.
twrp 3.1.1
https://github.com/abi55514/android...ve3gxtc/blob/master/SM-J106B_twrp-3.1.1-0.tar
kryz said:
Hi,
I bring a method to root this phone, ive tried with an Asian device but i know is working with South American branch as well.
-Download TWRP for SM-J105B.(link in the post).
-Download SuperSu.(link in the post).
-Enable developer options.
-Enable OEM unlock.
-Enter download mode (home+volume down+power)
-Flash with odin the SM-J105B_TWRP.tar recovery (option AP).
-Enter recovery (home+volume up+power).
-Flash SUPERSU_v276.zip.
-Reboot.
That's all
This method will install su in a boot partition(systemless).
¡ALERT!
Don't modify any file in a system partition or you will brick your phone because system is verified in each boot.
Regards,
Click to expand...
Click to collapse
Any one can share link of twrp 3.1.1
Related
Hello! Here im gonna show you an answer for how to flash custom recovery, this is very easy and you only need a pc or some couple of apps and a file.
First things first make sure you're phone is supported, unofficial custom recoveries works fine! Download the tar/img file of the custom recovery and some couple of apps on second method or a program and usb cable on first method.
PC method: Tar file
This one's will work fine and it will have no chance of failing in flash (Depends if something happened on the phone while flashing)(make sure you have samsung usb drivers installed!)
1. Install ODIN3 and Samsung USB Drivers
2. Make sure you have the downloaded tar file of the custom recovery.
3. Turn off the phone and make sure it is in ODIN Mode or Download Mode (A useful feauture for Samsung Devices)
4. Connect the phone to PC via USB Cable
5. Select the AP/PDA button (depends on you're ODIN3 version)
6.Select the tar file
Follow additional instructions from the custom recovery installation instructions or you may fail. (cuztomizing the settings or removing something on the phone)
7.After that click start and wait for some few seconds.
8a. If it leaded you to lock screen, launch recovery to make sure it flashed perfectly and works fine. But if it doesnt work reflash the recovery again/flash it with another version of recovery or another recoveries like CWM/Philz/TWRP (if reflashing dont work). Maybe because the recovery flashed is bugged or corrupted.
8b. If it leaded you automatically to "recovery booting" and then turns into ODIN Mode or Download Mode. Reflash the recovery again/Flash it with another recovery version or another recoveries like CWM/Philz/TWRP. Maybe because the recovery flashed is bugged or corrupted.
Non-PC Method: IMG File
This second method have some chances or RARE chances you may fail and brick or get stuck on a certain point, somehow convenient if you're out of options on flashing.
1. Download and Install Flashify app
2. Select your custom recovery IMG file
3. Wait for it to say that the file is flashed
4. Reboot the device
At this point, this one is the confusing point because you maybe dont know what to do next when you reboot the phone
5a. After rebooting the device, and it leads you to lock screen. Launch recovery to make sure its perfectly flashed and working. If not and when you launch the recovery, it leads you to download mode (recovery only problem), it looks like you need reflash it again/flash another recovery version or another recoveries like CWM/Philz/TWRP(if reflashing dont work) . Maybe because the recovery flashed is bugged or corrupted.
5b. After rebooting the device, it leads you automatically to recovery and not to the lock screen. It shows as "recovery booting" and then turns into ODIN Mode or Download Mode, this is the point you have to reflash it again/flash it with another recovery version or another recoveries like CWM/Philz/TWRP(if reflashing dont work). Maybe because the recovery flashed is bugged or corrupted.
This is some recoveries which include the two recoveries I said in this thread: Credits to @aapav01 @ali.filth for this amazing recoveries!
TWRP 3.0.0 by @aapav01 : http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535
Philz Recovery by @ali.filth : http://forum.xda-developers.com/galaxy-grand-2/orig-development/sm-g7102-philz-touch-6-47-4-t2798020
Request!: Whenever you visit some threads like this please leave a big thanks to them for there hardwork. Thank you
HAPPY FLASHING AND HAVE A GREAT CHRISTMAS AHEAD OF YOU!
goood job mate
agriculture said:
goood job mate
Click to expand...
Click to collapse
Thank you sir! Merry christmas and happy new year
NYT_RootComm said:
Thank you sir! Merry christmas and happy new year
Click to expand...
Click to collapse
how do i install custom recovery
This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks
Hello everyone,
I am not an IT guy and apparantly not an intelligent man as well.
I tried rooting my phone following a guide I found and was able to unlock bootloader and install TWRP on my phone. When I tried the next step (installing Supersu) all my files appeared encrypted when I tried to install through TWRP. Checked some other guides that said "clean up data". Went to TWRP and wiped phone (genius). now i am stuck in fastboot & rescue mode or the emui recovery which does nothing.
"fastboot&rescue mode
please coonect usb cable to
your computer and open hisuite
Android reboot reason:AP_S_COLDBOT
NA
VOLUMNKEY_DOWN_PRESS_PROCESS_FUNC
PHONE Unlocked
FRP Unlock"
Any help appreciated and sorry about the new post but through reading other posts, the standard language you guys use is way too advanced for my comprehension
Ok so you're phone is PHONE Unlocked & FRP Unlock, good.
You have access to :
- bootloader, good.
- stock recovery or twrp ?
- erecovery ?
In stock recovery not twrp, did you tried to "Wipe Data/Factory reset" ?
In stock Erecovery, did you tried to "download latest version and recovery" (while having stock recovery on recovery, not twrp) ?
---------- Post added at 15:00 ---------- Previous post was at 14:58 ----------
Were you on nougat emui 5 or oreo emui 8 ?
oslo83 said:
Ok so you're phone is PHONE Unlocked & FRP Unlock, good.
You have access to :
- bootloader, good.
- stock recovery or twrp ?
- erecovery ?
In stock recovery not twrp, did you tried to "Wipe Data/Factory reset" ?
In stock Erecovery, did you tried to "download latest version and recovery" (while having stock recovery on recovery, not twrp) ?
Click to expand...
Click to collapse
I did install TWRP on it before everything happened but i dont have access to it anymore.
in erecovery I only have 3 options:
download latest version and recovery
reboot
shutdown
after clicking on download latest version and recovery, my screen goes into "connecting WIFI" and from there "getting package info failed"
if you have europe version , repair from e-recpvert not work.
you have to flash stock recovery and use a three fingers way for install B130
@Boomaye What happens when you boot to recovery ? (not erecovery ?)
angelobiz said:
if you have europe version , repair from e-recpvert not work.
you have to flash stock recovery and use a three fingers way for install B130
Click to expand...
Click to collapse
@angelobiz I appreciate the help but remember i mentioned i am a novice at this? i am completely new to this, reason why i screwed up probably hehe... i bought it from gearbest and i am using it in South America
@oslo83
when i boot to recovery a screen with android cartoon appears with the following writting:
"fastboot&rescue mode
please coonect usb cable to
your computer and open hisuite
Android reboot reason:AP_S_COLDBOT
NA
VOLUMNKEY_DOWN_PRESS_PROCESS_FUNC
PHONE Unlocked
FRP Unlock"
when i do a regular boot the system enters a loop with honor logo and after a while of this boot loop it sends me to erecovery
Are you not misunderstanding recovery mode with boorloader mode ?
---------- Post added at 20:11 ---------- Previous post was at 20:09 ----------
https://4pda.ru/forum/index.php?showtopic=772246&st=800#entry55689846
you have to check if you gave stock recovery or TWRP.
Close phone, and turn on the phone phone holding Volume UP and Power together,. WHITHOUT ANY USB CABLE CONNECTED (otherwise you will have e-recovery)
if you have stock recovery you have to do so:
1) download "stock service B130" from:
https://forum.xda-developers.com/hon...stock-t3696892
2) copy UPDATE.APP and update_STF-L09_hw_eu.app to external SDCARD into /dload folder
turn on the phone holding Volume + and volume - and power ( three fingers way)
if all is good, phone restart in stocj recovery and update firmware....
you will have again bootloader and frp blocked
if you have twrp installed, you have to install again a stock recovery....
you can try:
1) download "stock service B130" from:
https://forum.xda-developers.com/hon...stock-t3696892
2) download those 2 file from
https://mega.nz/#F!Y59nFYbJ!fb1f4UpEdgABZ4NhOfu1JQ
3) put all files in HWOTA7 directory on external SD
4)In TWRP find the folder HWOTA7 on the phone SD and from it flash the file "hwota7_update.zip"
he phone will reboot itself into the stock recovery and it will install the firmware.
++++++ Important ! ! ! ++++++
After have installed the firmware, you need to boot into the recovery and make a full Wipe
if all ok, b130 firmware will be flashed.
otherwise toy will have now a stock recovery installed and you can try whit three fingers mode
oslo83 said:
Are you not misunderstanding recovery mode with boorloader mode ?
---------- Post added at 20:11 ---------- Previous post was at 20:09 ----------
https://4pda.ru/forum/index.php?showtopic=772246&st=800#entry55689846
Click to expand...
Click to collapse
Sorry @oslo83 i may be, as i mentioned i lack the specific knowledge...
i can only boot it in fastboot&recovery through "down volume + power key" or in the regular mode which after looping through the Honor logo a few times stops at the "eRecovery" from huawei.
that is basically all i have access to
@angelobiz : if he's on oreo, will it work with these nougat's files ?
@Boomaye :
Were you on nougat, emui 5 or on oreo, emui 8 ?
ok, now you have to flash a valid recovery
we try whit a stock recovery:
downaload this recovery:
https://mega.nz/#!ostQGRpC!X38uOE0LDz5G7LJp27Ie_BqMBnx_6Zpe7AEbHtNPUQU
go in fastboot mode ( cooncet usb cable to pc holding volume- button)
and flash recovery:
fastboot flash recovery STF_RECOVERY_NoCheck.img
tell me is all is ok, and now you can go in recovery stock, turining phone holding volume+ and power button WHITOUT USB CABLECONNECTED
---------- Post added at 09:52 PM ---------- Previous post was at 09:50 PM ----------
oslo83 said:
@angelobiz : if he's on oreo, will it work with these nougat's files ?
@Boomaye :
Were you on nougat, emui 5 or on oreo, emui 8 ?
Click to expand...
Click to collapse
NO... i assume he is in nougat.
if he is in Oreo we have to use other files
angelobiz said:
you have to check if you gave stock recovery or TWRP.
Close phone, and turn on the phone phone holding Volume UP and Power together,. WHITHOUT ANY USB CABLE CONNECTED (otherwise you will have e-recovery)
if you have stock recovery you have to do so:
1) download "stock service B130" from:
https://forum.xda-developers.com/hon...stock-t3696892
2) copy UPDATE.APP and update_STF-L09_hw_eu.app to external SDCARD into /dload folder
turn on the phone holding Volume + and volume - and power ( three fingers way)
if all is good, phone restart in stocj recovery and update firmware....
you will have again bootloader and frp blocked
if you have twrp installed, you have to install again a stock recovery....
you can try:
1) download "stock service B130" from:
https://forum.xda-developers.com/hon...stock-t3696892
2) download those 2 file from
https://mega.nz/#F!Y59nFYbJ!fb1f4UpEdgABZ4NhOfu1JQ
3) put all files in HWOTA7 directory on external SD
4)In TWRP find the folder HWOTA7 on the phone SD and from it flash the file "hwota7_update.zip"
he phone will reboot itself into the stock recovery and it will install the firmware.
++++++ Important ! ! ! ++++++
After have installed the firmware, you need to boot into the recovery and make a full Wipe
if all ok, b130 firmware will be flashed.
otherwise toy will have now a stock recovery installed and you can try whit three fingers mode
Click to expand...
Click to collapse
Thank you sir!! i will try the step by step first thingwhen i get back rom work!
angelobiz said:
ok, now you have to flash a valid recovery
we try whit a stock recovery:
downaload this recovery:
https://mega.nz/#!ostQGRpC!X38uOE0LDz5G7LJp27Ie_BqMBnx_6Zpe7AEbHtNPUQU
go in fastboot mode ( cooncet usb cable to pc holding volume- button)
and flash recovery:
fastboot flash recovery STF_RECOVERY_NoCheck.img
tell me is all is ok, and now you can go in recovery stock, turining phone holding volume+ and power button WHITOUT USB CABLECONNECTED
---------- Post added at 09:52 PM ---------- Previous post was at 09:50 PM ----------
NO... i assume he is in nougat.
if he is in Oreo we have to use other files
Click to expand...
Click to collapse
Hi guys, i didnt answer because i am not sure, but i do believe it is emui 5.1 or 5.0 as i remember seeing it many times (and never 8.0 or 8.1)
i will try the solution today when ig et back to work, and i really do appreciate all the help/effort. you guys are doing this for free without any kind of retribution except my thanks, which is pretty awesome. just want to make my appreciation for your work very clear Oslo and Angelo my best regards
angelobiz said:
you have to check if you gave stock recovery or TWRP.
Close phone, and turn on the phone phone holding Volume UP and Power together,. WHITHOUT ANY USB CABLE CONNECTED (otherwise you will have e-recovery)
if you have stock recovery you have to do so:
1) download "stock service B130" from:
https://forum.xda-developers.com/hon...stock-t3696892
2) copy UPDATE.APP and update_STF-L09_hw_eu.app to external SDCARD into /dload folder
turn on the phone holding Volume + and volume - and power ( three fingers way)
if all is good, phone restart in stocj recovery and update firmware....
you will have again bootloader and frp blocked
if you have twrp installed, you have to install again a stock recovery....
you can try:
1) download "stock service B130" from:
https://forum.xda-developers.com/hon...stock-t3696892
2) download those 2 file from
https://mega.nz/#F!Y59nFYbJ!fb1f4UpEdgABZ4NhOfu1JQ
3) put all files in HWOTA7 directory on external SD
4)In TWRP find the folder HWOTA7 on the phone SD and from it flash the file "hwota7_update.zip"
he phone will reboot itself into the stock recovery and it will install the firmware.
++++++ Important ! ! ! ++++++
After have installed the firmware, you need to boot into the recovery and make a full Wipe
if all ok, b130 firmware will be flashed.
otherwise toy will have now a stock recovery installed and you can try whit three fingers mode
Click to expand...
Click to collapse
Hello,
i was able to access TWRP through power + volume up.
i downloaded the files you mentioned (but the link was broken, so i searched for the 130b on XDA and found it) and put them on the SD card.
i clicked install and selected the service full repair zip and swiped to install
my phone rebooted and i got an error instalation failed
hello guys,
after i followed Angelo steps and i got a failed instalation notice, i went to erecovery and it suddenly gave me the option for a factory reboot, which i did and now i can use the phone regularly.
i am back to ground zero
i am not sure exactly what i did that worked, but it worked even though it said failed
thanks for the help
edit: Angelo i sent a donation as thanks
thanks again
thanks a lot.
Boomaye said:
hello guys,
after i followed Angelo steps and i got a failed instalation notice, i went to erecovery and it suddenly gave me the option for a factory reboot, which i did and now i can use the phone regularly.
i am back to ground zero
i am not sure exactly what i did that worked, but it worked even though it said failed
thanks for the help
edit: Angelo i sent a donation as thanks
thanks again
Click to expand...
Click to collapse
I think that you have flashed a valid recovery (e-recovery don't give you a choice of factory reset)
And so you can solve.
Maybe I don't know too h
What you have done... But it is important that now phone is ok.
Which firmware you have now?
Check if your bootloader and Frp are blocked and of you still have twrp
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO https://youtu.be/30gFxuyiFqU
Credits and Thanks to:
@Darkcannibal and @santhoosh
redymedan said:
TWRP 3.4.0.0 for Galaxy A50 has patched Magisk v20.4. For more information about TWRP 3.4.0.0 please visit https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Installing TWRP and Rooting may void warranty.
Flash TWRP and Rooting instructions:
1. Make sure the bootloader is unlocked, OEM unlock option is grey out
2. Enter Download Mode
3. 4. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN ( uncheck "Auto Reboot" )
5. Enter TWRP Recovery for first time: Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
8. Format data.
9. Install multidisabler-samsung-2.2.zip
10. Reboot to System
11. When Samsung logo appears wait for a few seconds then press and hold volume down + power key until the screen blank
12. Enter TWRP Recovery
13. Reboot to Recovery
14. Install Magisk Manager ( connect to internet first )
15. Done!
Downloads
TWRP 3.4.0.0
multidisabler-samsung
For detail instructions WATCH THIS VIDEO
Credits and Thanks to:
@Darkcannibal and @santhoosh
Click to expand...
Click to collapse
Nice jo3
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL
how to put twrp on my A50 , please
Jhon177 said:
Hi.. your method not working on A50F - BTF1 ( A50FD )
on odin showing meassage RQT CLOSE. and FAIL ?
how to put twrp on my A50 , please
Click to expand...
Click to collapse
Let me know your A50 model number and region?
redymedan said:
Let me know your A50 model number and region?
Click to expand...
Click to collapse
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Jhon177 said:
Yess thanks before for your reply.
This for detail my series A50 :
A505FXXU5BTE1
A505FDDS5BTF1
region indonesia , hope you can help me
Just info.. i do method same way like you. But always fail
( maybe because BTC4 ☹☹☹ )
Click to expand...
Click to collapse
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
redymedan said:
I used A505F Indonesia too, it works for BTE1 and BTG3 (latest A505F firmware update ), It works for Android 10 firmware. I suggest you flash stock rom and then flash TWRP again
Click to expand...
Click to collapse
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Jhon177 said:
Hi redymedan.. i try justnow. Same result fail ?
on the developer option. I thick already for oem lock
Info when iam flash AP twrp : on the screen bootloader mode
( custom binary boot , blocked by OEM LOCK )
☹☹☹
Click to expand...
Click to collapse
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
twrp works on Baseband: A505FXXU5BTE1.
BuildNumber: QP1A.190711.020.A505FDDS5BTF2
Thank You
redymedan said:
Unlocked bootloader does not enough by enabling OEM unlocking options, you must some steps again
watch this video Unlock Bootloader https://youtu.be/8j6WkOOA3f4
Click to expand...
Click to collapse
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
Before install multidisabler, you must format data first... I think you missed a step, please check it again
redymedan said:
Before install multidisabler, you must format data first... I think you missed a step, please check it again
Click to expand...
Click to collapse
Hi redyman , just info ??
I am suscsess for evrything about twrp on my device A50.
About multidisabler samsung.
I try direct Reboot to system
?? violaaaaaa my A50 start SETUP PHONE.
Without installing Multidisabler. And my phone runing normal nice and greattttt
Maybe on lattes firmaware no need Flash multidisabler.
Btw thank alottttts to Redymedan , for attention reply my question until sucsess flash twrp for my A50 ?? terimakasih banyakkkk bosku
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
gSingh05 said:
Hi
I followed instructions and youtube link.
I got twrp working. But magisk manager says 'Magisk is not installed Latest: 20.4(20400)' . Magisk Manager is up to date Installed: 7.5.1 (267) Latest: 7.5.1(267)(7)
On clicking Install it offers to download zip. I downloaded the zip, went to twrp and flashed it but still it says not installed .
Edit: I have to go into twrp and select boot->recovery , this will boot with magisk. But on reboot simply it says Magisk not installed
Edit: Go to twrp -> reboot recovery. Open Magisk manager, Install -> Recommended Way, reboot. This will make rooting permanent.
Everything working
Thank You
Click to expand...
Click to collapse
That is long story I think, as I am not wrong in after android 8 or 9 above, It caused partition structure. In android 8 above partition structure has changed, we can not install magisk manually in TWRP anymore, we must patch it in recovery.img, repack recovery.img, boot.img and vbmeta.img to be flashable tar file then flash it. It looks no solution until now..
HELP
Jhon177 said:
HI REDYMAN i am sucses on twrp. but the problem now when i am installing multidisabler , twrp show failed
( errror installing zip file '/external sd/ ) red collor:crying::crying:
thanks for your attention reply
Click to expand...
Click to collapse
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
Please show me the error message or screenshot of its... I did not face any issue when install multidisabler..
Mortives said:
COULD YOU SOLVE IT? I AM ALSO GENTLE, DOES NOT INSTALL MULTIDISABLER :crying:
Click to expand...
Click to collapse
For me. Done. I think if you use lattest firmware / juni security patch.
No need samsung multidisabler.
On twrp
Just format data -
Swipe to factory reset
Reboot to recovery.
Install magisk manager done. ?
That my experience.
( that also true until now I am not succes to flash multidisabler ,but everything work fine without multidisabler ,
bener bro gak bisa . Tulisannya error merah saat flash zip sd card )
BOHEMIA840 said:
@redymedan
Click to expand...
Click to collapse
Not tested, I am not sure it will work.. but you can try to test it
I am using 3.3.1.3. The process is the same? even if I already have the twrp?
i'm having problem to boot in twrp it doesn't open i tried every way above and success once or twice only and after i granted su i rebooted then i lost su again
So uhm first time posting in XDA, and also first time rooting a phone in my life...
Anyways apparently twrp doesn't have an official custom recovery for the J6... and despite searching for the J600G (specificaly: J600GDXSACVB1), I was unable to find any proper website for my model (ive heard I need the exact file for my exact model)... maybe you guys know any twrp custom recovery for it....
And after that... some are saying just flash magisk, some are saying I need to disable VaultKeeper to really unlock Bootloader to then root the device... so I am getting confused
If anyone can help that'll be great!
Phone Info:
Android Version: 10
Baseband Version: J600GDXSACVB1
Knox version: Knox 3.5 (idk if this is needed)
"OEM Unlocking" option in developer setting is enabled
"USB Debugging" is also enabled
ThatUnknownDude said:
So uhm first time posting in XDA, and also first time rooting a phone in my life...
Anyways apparently twrp doesn't have an official custom recovery for the J6... and despite searching for the J600G (specificaly: J600GDXSACVB1), I was unable to find any proper website for my model (ive heard I need the exact file for my exact model)... maybe you guys know any twrp custom recovery for it....
Click to expand...
Click to collapse
TWRP =/= root. Root means you have SU access in Android system. Recovery mode is a separate environment; the difference between TWRP and stock recovery is that TWRP allows you to flash unsigned images.
If you just want to root your phone with Magisk, you can follow these instructions.
Otherwise, if you want to be able to flash custom ROMs, you can use this to patch your stock recovery to enable Fastbootd which will allow you to flash partitions directly instead of using Odin.
ThatUnknownDude said:
And after that... some are saying just flash magisk, some are saying I need to disable VaultKeeper to really unlock Bootloader to then root the device... so I am getting confused
Click to expand...
Click to collapse
Yes, see the Magisk instructions I linked. Samsung likes to make things complicated, so when you've unlocked the bootloader, it still won't let you flash custom images until Vaultkeeper has been disabled.
Hmm ok thanks.. I saw the Magisk installation help page and I am getting stuck in this part:
Allow bootloader unlocking in Developer options → OEM unlocking
Reboot to download mode: power off your device and press the download mode key combo for your device
Long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
Click to expand...
Click to collapse
I am long pressing volume up button in download mode however nothing is happening...
(Edit) Oh and KG State (which I assume is another word for RMM Lock) is just showing 'checking' and not 'prenormal' or anything...
I think TWRP may be the cause of the bootloop. I flashed a stock firmware of J600G to completely reset it (factory reset of sorts) and then flashed TWRP, and entered the recovery screen. After that the bootlooping issue started... is there any other good custom recoveries?
Hi TUD, fellow J600G user here, I'd recommend you to start off easy by installing TWRP 3.2.3.
Requirements -
Odin installed on your computer.
USB cable
TWRP tar file
To install TWRP -
1. Switch your phone off and hold volume up and down buttons at the same time while connecting your phone to the computer by cable.
2. Open Odin and go to options, switch off auto reboot, now click on AP and select your TWRP tar file.
3. Now after Odin says PASS disconnect the cable from your phone and hold Volume down + power button for 7 seconds and as soon as the screen goes black hold Volume up + power button. This will boot you into your newly installed TWRP.
When it comes to custom roms J6 has some limitations for a few good ones. In my opinion you can install EvolutionX 4.0 (made by @adi_ss) that is based on android 10 as its the easiest rom to install. All you have to do is follow the instructions given by the developer.
Happy Flashing.