Related
Anyone find any good tpu cases?
I found a couple on Amazon but most with bad reviews. Most complaints were that the cases do not fit.
I found this one.
http://www.amazon.com/dp/B00I86GGII/ref=cm_sw_r_udp_awd_22zhtb0CC8DKH
It has no reviews yet and I bought it ...I don't have it yet... But let's hope it's good.
I have this one. It fits. It's snug, but it fits. The buttons are pretty hard to press though. It will do until some other options come out I guess!
If I could have any case for this device, I would want a Gumdrop Bounce Skin.
My wife has one for her Ipad air with a glass screen protector and there is nothing like it. Survives drops and a 5 year old, feels great to touch, sticks to your hand so you can use if one handed without a strap, sticks enough to a table or whatever so you can just lean it up against anything (wall, pillow, monitor, shelf, pencil holder, ...) and it stays at the same angle you set it down at, easy.
I just love this thing. If gumdrop doesn't make it, I'm going to have to bribe a silicone guy and get him to copy one for me. I think I could almost duplicate it with RTV silicone rubber if I bought two of them cut them up to fit and then did a two part mold, but it would take a bit of thinking and I don't know how well RTV silicone would last (but it would have the right shore A hardness to feel great and "stick" in all the right ways).
The best thing about the case is that while it grabs lint and stuff like most silicone cases, it does not feel bad and does not inhibit its stickiness. This might not make sense to you if you aren't acutely aware of everything you touch and how it feels (and I wish I didn't), but if you are sensitive to it, this is amazing. Now I haven't covered it in baby powder or anything, but it is amazing not having to worry about tossing it on a pile of laundry or the bed or the carpet and it not getting so covered in tiny dust that you feel like you have to wask it off. Even my otterbox for my GS4 makes me feel like that sometimes, but not my wife's gumdrop bounce, man I'm envious of that skin.
If you want here is the link to it on amz. for the ipad. they even have it in like 7 colors, I just wish they made it for the Note pro.., maybe they will.
http://www.amazon.com/Gumdrop-Cases-Bounce-Skin-BOUNCE-IPAD5-LTBLU-V3/
I got my Poetic Graph Grip yesterday. I'm pretty torn about it. The fit is great, it is much better protection than the Fosmon case linked above that I have, it is comfortable to hold BUT... it is heavy!! It adds a significant amount of weight to an already large tablet. And it also seems to be a bit of a dog fur/dust magnet. Which is a problem in a house with three dogs! So I'm not sure whether I will continue to use it or not.
OK I got the tpu case.... And it's pretty good. The buttons are a little hard to press especially the power button.... Other than that it's not bad.
Sent from my SM-P900 using Tapatalk
I am about 90 percent certain I will get this phone. I've searched around and all these 'best' case threads for the last month IMO are useless because they don't have any requirements other than being the 'best' case people subjectively feel about them.
Here's a much better question, as I am looking for the 'best' protective case for this phone?
bulk/weight is not much of a concern. I want to know what you all think is the case to get to not have any worries about dropping it from say 4 to 5 feet on hard surfaces. Like all day dropping and not break a sweat. So far my searching has come up with:
Ballistic Touch Jacket
Supcase heavy duty
Trident Aegis
I've used the aegis before. I like the case, and am leaning to that one. Am I missing any other cases I should consider?
8Fishes said:
Ballistic Touch Jacket
Click to expand...
Click to collapse
This is a good case. Thick silicon bumper with a hard plastic shell. I have one on order since it seems to be the *best* protection available.
Edit: You actually linked to the Nexus 5 Ballistic. You'll certainly want the **SIX**:
https://www.goballisticcase.com/shop/motorola/nexus-6/tough-jacket-maxx/
Also, you can get them cheaper on Amazon;
http://www.amazon.com/gp/offer-listing/B00QMGRW8E/ref=dp_olp_new?ie=UTF8&condition=new
Supcase heavy duty
Click to expand...
Click to collapse
This is JUNK. Unfortunately, nobody in the Chinese phone case manufacturing business seems to know squat about mixing TPU, so every cheap chinese TPU case will have a "polycarbonate hard shell" over a flexible HARD TPU shell.
Trident Aegis
Click to expand...
Click to collapse
This one looks... OK. If the inner layer is made of a decent soft rubber/silicon (their site seems to be very lacking in details...), it should protect the phone well. I'm not really liking the SHAPE of the outer plastic shell though, the side opposite the buttons seems to have excessive cutouts and a fairly thin band.
I've used he aegis before. I like the case, and am leaning to that one. Am I missing any other cases I should consider?
Click to expand...
Click to collapse
http://www.amazon.com/MoKo-Google-N...8&qid=1422555727&sr=1-2&keywords=moko+nexus+6
I have one of these right now. Its actually very good. Not the thickest silicon bumper, but decent and strikes a fair balance between bloating it out and taking care of a drop. Not a chance it would take a whole 7 foot drop to pavement like the Ballistic claims on theirs, but probably fine for 3-4 feet. For the price, its a steal.
Get the UAG Case! Don't get that cheap case the other guy has. I'm using this UAG one right now and let me tell you, it's bloody fantastic.
http://www.urbanarmorgear.com/products/nexus-6-case
Long time user of Ballistic. I can attest to their durability and drop protection. FWIW, I highly recommend.
As nice as the UAG sounds, Not sure about the single body. I always feel that a soft + hard shell will offer better protection. I'll have to do some youtube searching to see who's doing drop tests with this case.
8Fishes said:
As nice as the UAG sounds, Not sure about the single body. I always feel that a soft + hard shell will offer better protection. I'll have to do some youtube searching to see who's doing drop tests with this case.
Click to expand...
Click to collapse
Found a guy drop testing an S5 with a UAG case on, can't find one with the Nexus 6 though
https://www.youtube.com/watch?v=7ybxd_XQJZ0
Oh and the case is basically the same as other cases with 2 shells one soft one hard, just merged together to make it thinner and lighter, but with the same amount of protection.
The ballistic case seems like it would take a good beating. Personally I think its fugly but it seems like your best bet.
C00lBeanz said:
Get the UAG Case! Don't get that cheap case the other guy has. I'm using this UAG one right now and let me tell you, it's bloody fantastic.
http://www.urbanarmorgear.com/products/nexus-6-case
Click to expand...
Click to collapse
Fantastic...thought it looks like complete amateur design hour. I mean seriously, they designed it and ordered the manufacturing without ever having seen or held a Nexus 6...they know it looks horrendous as you never see official UAG photos of the case back on a Nexus 6.
Skripka said:
Fantastic...thought it looks like complete amateur design hour. I mean seriously, they designed it and ordered the manufacturing without ever having seen or held a Nexus 6...they know it looks horrendous as you never see official UAG photos of the case back on a Nexus 6.
Click to expand...
Click to collapse
It looks amazing... Put it on the Nexus 6 and it turns into NexGEN! You can easily pop the logo off too if you want.
Skripka said:
Fantastic...thought it looks like complete amateur design hour. I mean seriously, they designed it and ordered the manufacturing without ever having seen or held a Nexus 6...they know it looks horrendous as you never see official UAG photos of the case back on a Nexus 6.
Click to expand...
Click to collapse
They didn't deviate from their previous design. UAG cases have all been the same except for the Note 2 case. I'm glad they put out the same design for the Nexus 6. Its the reason I bought their case for my previous 3 devices. Hopefully they offer more colors in the near future. The case feels good in the had. It has plenty of grip and good drop protection. The buttons are responsive, you can tell which one it the volume and power button by touching them.
I would steer clear from heavy cases, this phone is heavy as it is. I'm using a regular supcase protector and it wears down your hand after 10 mind of use.
Sent from my Nexus 6 using XDA Free mobile app
Thanks for all the replies. Not sure on the ballistic myself. I don't like the aesthetics at all.
I will definitely get a heavy case.. i don't use my phone for too long for any given session but that might change with the much larger screen.
8Fishes said:
Thanks for all the replies. Not sure on the ballistic myself. I don't like the aesthetics at all.
I will definitely get a heavy case.. i don't use my phone for too long for any given session but that might change with the much larger screen.
Click to expand...
Click to collapse
The UAG case is both lightweight, thin, and has very good protection. The case is military-grade drop tested too. It also includes a free screen protector if you're interested, personally I don't use screen protectors.
C00lBeanz said:
The UAG case is both lightweight, thin, and has very good protection. The case is military-grade drop tested too. It also includes a free screen protector if you're interested, personally I don't use screen protectors.
Click to expand...
Click to collapse
No it has not been tested as such. It "meets" a "standard" so loosely worded as to be utterly worthless and in no meaningful way a standard. To actually meet the standard, you have to state how you tested it specifically. And I quote from their n6 listing:
"meets military drop-test standards (MIL STD 810G 516.6)"
If they actually tested it... that blurb would have a different verb.
I think it is kind of a nice case...but, please recognize worthless cheap marketing for what it is, to sway people who don't think things through and see them for what they are.
Skripka said:
No it has not been tested as such. It "meets" a "standard" so loosely worded as to be utterly worthless and in no meaningful way a standard. To actually meet the standard, you have to state how you tested it specifically. And I quote from their n6 listing:
"meets military drop-test standards (MIL STD 810G 516.6)"
I think it is kind of a nice case...but, please recognize worthless cheap marketing for what it is, to sway people who don't think things through and see them for what they are.
Click to expand...
Click to collapse
Well, maybe not ACTUALLY military-grade tested, but it did save me a 3-4 foot drop onto my school's tile floor.
Personally I use the Ringke Max: http://www.amazon.com/Free-Screen-P...+nexus+6&pebp=1422593278769&peasin=B00OKRJNZM
I've (for some reason) always gone and gotten a Rearth (Ringke) case for my Motorola phones. Had Slim for my Moto G (1st Gen). Dropped it by accident a few times. Case took most of the hits, phone came out fine (luckily didn't hit on the front corners...probably would have cracked screen if it did). Got the Max since it offers a bit more of a glove-like protection for my N6.
Trident makes some good cases. I still have my Trident for my HAM2. It's a tank of a case, but increases thickness and width a bit too much for my liking. On top of that, getting it out of the case requires the use of a slotted screwdriver. Had to take it out once a week since the built-in screen protector would form some air gaps causing dust to get trapped. Ended up getting a slim case for the HAM2 becuase of it.
Other that Trident's claim that it meets and exceeds ANSI military spec (which is very loose definition as pointed out above), I've never dropped my HAM2 to test it. Though they do have videos up of others with Tridents on their Sammys and such throwing their phones across a room or running it over with a truck (and whatnot).
Acreo Aeneas said:
Personally I use the Ringke Max: http://www.amazon.com/Free-Screen-P...+nexus+6&pebp=1422593278769&peasin=B00OKRJNZM
Click to expand...
Click to collapse
God no. That thing won't take a 2 INCH drop.
---------- Post added at 04:31 PM ---------- Previous post was at 04:28 PM ----------
8Fishes said:
Thanks for all the replies. Not sure on the ballistic myself. I don't like the aesthetics at all.
I will definitely get a heavy case.. i don't use my phone for too long for any given session but that might change with the much larger screen.
Click to expand...
Click to collapse
My Ballistic arrived last night.
Its actually a lot more slim than I was expecting. Not in a bad way, but in a "well planned" way. Looks great in person, and actually very nice to hold. The "screen protector" it came with (if you can call it that) is utterly useless.
doitright said:
God no. That thing won't take a 2 INCH drop.
Click to expand...
Click to collapse
Do you have proof of this? Other than one supposed cracked screen with the case on, I haven't found any proof that the phone would not survive a typical drop. And the one with the cracked screen seems to have fallen on the screen itself rather than on the case (point of impact is just on the edge of the visible screen).
Acreo Aeneas said:
Do you have proof of this? Other than one supposed cracked screen with the case on, I haven't found any proof that the phone would not survive a typical drop. And the one with the cracked screen seems to have fallen on the screen itself rather than on the case (point of impact is just on the edge of the visible screen).
Click to expand...
Click to collapse
It may not be the most heavy duty case out there, but I am happy with it. Dropped my N6 on Thursday while doing a walkthrough on a kitchen install, my heart stopped when my phone went bouncing across a brand new tile floor and landed face down. Not a scratch on the phone itself. YMMV but the case fits well, it doesn't add too much bulk and I didn't have to send my phone off to get repaired.
Thanks for all the input. I've settled on the trident + jelly comb TG. I'm hoping it will be a winning combination, will be posting picks. Ideally since TGs are all pretty small I would like a heavier case to have some overlap on where it drops off from the curve... but we'll see.
Hi all,
Back again with another video- there will be a few coming over the weekend as I've had some accessories delivered! Thought I'd start big with a bunch of Orzly accessories.
So I've got the clear and coloured flexicases as well as two different colours of the Wallet case.
FlexiCase
Looks like Orzly have changed up their design this year for the FlexiCase. Traditionally, they've really only done the clear one. That's still here and from what I've seen across the boards, allot of people have ordered it, almost because it was the only option up until a few days ago. This is a decent case, it's clear so you can show your phone off, adds a decent level of grip with little bulk!
What they've added this year are a bunch of coloured FlexiCase which seem to be from an entirely different mould. They come in a multitude of different colours, and have both a gloss and matte finished. I'm pretty impressed with these, to the point that my phone is currently sporting the red FlexiCase as I type this! Again they add a good amount of grip, a small amount of impact protection with as minimal bulk as they can!
Wallet Case
If you've watched any of my Wallet videos before you'll know that I stand firm against their use. They're far too bulky and obtrusive for me to use in my day-to-day life. However I know there are a TON of people who do actually use them as I witness it daily. The Orzly offering seems to have gotten a lot better this year in comparison to their previous entries. They seem to have combined this new FlexiCase mould into the Wallet Case. Whereas last years OP3 had a hard grip on the inside, which could snap, this year they've gone with fully body flexible protection. This is the right decision in my eyes, it makes the case MUCH more viable as something that will protect your phone.
and heck, if you don't like the Screen Protector options that are out their currently. This could be the case for you, as it protects the screen as well!
If you're looking to buy any of these, the links are in the description below the video on YouTube and here is the video:
Link to the video
Been using the clear flexi case for a while now and it's a solid case. can't really go wrong with it! Waiting for my wallet case from them now but if it's anything like their other cases for the OP5 it should be a solid product!
Thanks for the video! Currently using the clear flexicase with my wallet case arriving tomorrow, and those coloured ones look really nice! Case addiction!
niijonodhg said:
Hi all,
Back again with another video- there will be a few coming over the weekend as I've had some accessories delivered! Thought I'd start big with a bunch of Orzly accessories.
So I've got the clear and coloured flexicases as well as two different colours of the Wallet case.
FlexiCase
Looks like Orzly have changed up their design this year for the FlexiCase. Traditionally, they've really only done the clear one. That's still here and from what I've seen across the boards, allot of people have ordered it, almost because it was the only option up until a few days ago. This is a decent case, it's clear so you can show your phone off, adds a decent level of grip with little bulk!
What they've added this year are a bunch of coloured FlexiCase which seem to be from an entirely different mould. They come in a multitude of different colours, and have both a gloss and matte finished. I'm pretty impressed with these, to the point that my phone is currently sporting the red FlexiCase as I type this! Again they add a good amount of grip, a small amount of impact protection with as minimal bulk as they can!
Wallet Case
If you've watched any of my Wallet videos before you'll know that I stand firm against their use. They're far too bulky and obtrusive for me to use in my day-to-day life. However I know there are a TON of people who do actually use them as I witness it daily. The Orzly offering seems to have gotten a lot better this year in comparison to their previous entries. They seem to have combined this new FlexiCase mould into the Wallet Case. Whereas last years OP3 had a hard grip on the inside, which could snap, this year they've gone with fully body flexible protection. This is the right decision in my eyes, it makes the case MUCH more viable as something that will protect your phone.
and heck, if you don't like the Screen Protector options that are out their currently. This could be the case for you, as it protects the screen as well!
If you're looking to buy any of these, the links are in the description below the video on YouTube and here is the video:
Link to the video
Click to expand...
Click to collapse
Thanks for pointing out how this woks with the matt and the gloss finish of the colored FlexiCases. Matt is better fro grip I think, but the gloss around the rim makes it look really nice, so it's a good combination. (previously I had assumed that the whole thing was matt and that maybe there was an all gloss version, as I think amazon describes these all as matt, so had previously (falsely) assumed that it was either/or with matt or gloss dependent on which style you bought. I cannot express enough how useful your videos have been for giving me a better understanding how these are really like in reality, so thankyou for showing these to us up close. After seeing this, I think I actually prefer the colored ones now to the transparent one, as the colored ones look like they don't suffer from picking up fingerprints the way any transparent one inevitably would, so would stay looking nicer alot easier, I reckon.
I do like the Wallet Case you showed in that video also. Are the inners just a similar material to the FexiCase, or are they actually the same mold aswell? (the flexicase seems to do a good job of protecting the camera at the back, so if it's the same, then that would answer my question about how the camera hole on the wallet case is. But if not an identical mold, how did you find the camera hole protection on the wallet case version?
thanks.
if anybody is interested in a second opinion on the matte cases, i just received mine, and decided to review it! https://forum.xda-developers.com/on...oneplus-5-arrived-t3633349/page4#post73031002
DarkExistence said:
if anybody is interested in a second opinion on the matte cases, i just received mine, and decided to review it! https://forum.xda-developers.com/on...oneplus-5-arrived-t3633349/page4#post73031002
Click to expand...
Click to collapse
Awesome!
niijonodhg said:
Click to expand...
Click to collapse
Thanks for this! Looks quite nice. Have you done the screen protector test with this one to see which ones fit in conjunction with it? (I remember you saying that the sleo screen protectors were not very good and that you preferred the orzly tempered glass as the best you have used so far for op5, but do you happen to know if the two are incompatible? (I remember from your other videos that the orzly screens are compatible with all their own cases, and with some of the otterbox ones, but would be useful to know which of the other branded cases that you thought were decent were also compatible with the better orzly screens, so that we know what all the viable choices are versus which ones definitely would not work together).
(I know you said you were going to a do a big vid that compares all the many combinations once you've received them all) but just checking in case there are any that you have tested out early. For example, which screen protector was on the phone when you tested the sleo case in this video? (or was the phone screenless in this one?)
thanks.
AnabolicAndroidz said:
Thanks for this! Looks quite nice. Have you done the screen protector test with this one to see which ones fit in conjunction with it? (I remember you saying that the sleo screen protectors were not very good and that you preferred the orzly tempered glass as the best you have used so far for op5, but do you happen to know if the two are incompatible? (I remember from your other videos that the orzly screens are compatible with all their own cases, and with some of the otterbox ones, but would be useful to know which of the other branded cases that you thought were decent were also compatible with the better orzly screens, so that we know what all the viable choices are versus which ones definitely would not work together).
(I know you said you were going to a do a big vid that compares all the many combinations once you've received them all) but just checking in case there are any that you have tested out early. For example, which screen protector was on the phone when you tested the sleo case in this video? (or was the phone screenless in this one?)
thanks.
Click to expand...
Click to collapse
SLEO definitely look interesting, I would also love to see their compatibility, especially as it seems to be a new company that has popped out of nowhere!
AnabolicAndroidz said:
Thanks for this! Looks quite nice. Have you done the screen protector test with this one to see which ones fit in conjunction with it? (I remember you saying that the sleo screen protectors were not very good and that you preferred the orzly tempered glass as the best you have used so far for op5, but do you happen to know if the two are incompatible? (I remember from your other videos that the orzly screens are compatible with all their own cases, and with some of the otterbox ones, but would be useful to know which of the other branded cases that you thought were decent were also compatible with the better orzly screens, so that we know what all the viable choices are versus which ones definitely would not work together).
(I know you said you were going to a do a big vid that compares all the many combinations once you've received them all) but just checking in case there are any that you have tested out early. For example, which screen protector was on the phone when you tested the sleo case in this video? (or was the phone screenless in this one?)
thanks.
Click to expand...
Click to collapse
Yeah, not screen protector on in this video. The SLEO/Nillkin definetley work as they don't go to the edge of the screen. I'm 95% the Orzly/CaseBase will work but I've not confirmed that!
niijonodhg said:
Yeah, not screen protector on in this video. The SLEO/Nillkin definetley work as they don't go to the edge of the screen. I'm 95% the Orzly/CaseBase will work but I've not confirmed that!
Click to expand...
Click to collapse
Okay thanks. I already don't like the design of the Sleo screen. (all those weirdly shaped square chunks missing looks horrible in my opinion). Have not seen what the Nilkin one is like, but I don't like the idea of it not fully covering it (unless the case edge lip is enough to cover what is missing), but I guess I'll just have to wait and see what they're all like when you do the final video. So far for me though, I have a feeling it's going to be a tossup between either the orzly or the casebase. Those last two look very similar judging by your videos, but are there any noticeable differences in quality between those two?
AnabolicAndroidz said:
Okay thanks. I already don't like the design of the Sleo screen. (all those weirdly shaped square chunks missing looks horrible in my opinion). Have not seen what the Nilkin one is like, but I don't like the idea of it not fully covering it (unless the case edge lip is enough to cover what is missing), but I guess I'll just have to wait and see what they're all like when you do the final video. So far for me though, I have a feeling it's going to be a tossup between either the orzly or the casebase. Those last two look very similar judging by your videos, but are there any noticeable differences in quality between those two?
Click to expand...
Click to collapse
Agree with this, SLEO and Nilikin just aren't doing it for me atm. Orzly is the best of a bad bunch sadly. Or you know, you could use a wallet case and not need a screen protector! Wallet case is pretty nice
DarkExistence said:
Agree with this, SLEO and Nilikin just aren't doing it for me atm. Orzly is the best of a bad bunch sadly. Or you know, you could use a wallet case and not need a screen protector! Wallet case is pretty nice
Click to expand...
Click to collapse
Yeah, I've thought about doing that! That's the way I used to do it years ago on my old iPhone 5. Works completely well that way whilst the case is closed, however I discovered the hard way that if your phone happens to fall face down while the case is open, obviously there is nothing there to protect the screen from smashing, so I've always used glass screen protectors ever since. However the new design for the orzly wallet cases seem to have a bit of a protective lip around the front, so these ones actually might be okay without the glass on. How is it on yours? do you reckon the lip around the front is enough to stop the screen hitting the floor if it fell face down like that?
(I guess alot probably depends on how high it fell from, or what part it landed on, etc, so I still reckon a combination of the two would ultimately still be the most guaranteed way). But being as you actually own one for this model, it would be interesting to get your opinions on it all the same
AnabolicAndroidz said:
Yeah, I've thought about doing that! That's the way I used to do it years ago on my old iPhone 5. Works completely well that way whilst the case is closed, however I discovered the hard way that if your phone happens to fall face down while the case is open, obviously there is nothing there to protect the screen from smashing, so I've always used glass screen protectors ever since. However the new design for the orzly wallet cases seem to have a bit of a protective lip around the front, so these ones actually might be okay without the glass on. How is it on yours? do you reckon the lip around the front is enough to stop the screen hitting the floor if it fell face down like that?
(I guess alot probably depends on how high it fell from, or what part it landed on, etc, so I still reckon a combination of the two would ultimately still be the most guaranteed way). But being as you actually own one for this model, it would be interesting to get your opinions on it all the same
Click to expand...
Click to collapse
Yeah unforunatly that seems like the only "case" where that a wallet case wouldn't protect the screen. I've been using the Orzly wallet case the past few days and it extreamly grippy so if i did drop it then it would probably be folded up
AnabolicAndroidz said:
Yeah, I've thought about doing that! That's the way I used to do it years ago on my old iPhone 5. Works completely well that way whilst the case is closed, however I discovered the hard way that if your phone happens to fall face down while the case is open, obviously there is nothing there to protect the screen from smashing, so I've always used glass screen protectors ever since. However the new design for the orzly wallet cases seem to have a bit of a protective lip around the front, so these ones actually might be okay without the glass on. How is it on yours? do you reckon the lip around the front is enough to stop the screen hitting the floor if it fell face down like that?
(I guess alot probably depends on how high it fell from, or what part it landed on, etc, so I still reckon a combination of the two would ultimately still be the most guaranteed way). But being as you actually own one for this model, it would be interesting to get your opinions on it all the same
Click to expand...
Click to collapse
Yeah definitely the only chance, a lot of the time i'd say thwe case would be closed though, or it would close at landing or something. Think its just takes a while to get used to!
A Guy Called Revive said:
Yeah unfortunately that seems like the only "case" where that a wallet case wouldn't protect the screen. I've been using the Orzly wallet case the past few days and it's extremely grippy so if i did drop it then it would probably be folded up
Click to expand...
Click to collapse
DarkExistence said:
Yeah definitely the only chance, a lot of the time i'd say the case would be closed though, or it would close at landing or something. Think its just takes a while to get used to!
Click to expand...
Click to collapse
Very true, Yeah, I've never had such problems when holding it in my hand to use it. (the time it happened to me I was actually watching videos in stand mode. Embarrassingly, I was in the toilet at the time, so reaching over for the paper I accidentally knocked it off the small cabinet it was resting on, and it fell down screen first. (No idea why I just shared that story in public, but completely true!)
Admittedly this is a very rare scenario, so is unlikely to ever happen to most people, but just explaining how it is possible, and why I have never dared to go without a glass screen protector ever since, even though there are other almost 99% foolproof ways to shield it. The wallet case is probably still by far the best type of case as a good backup way if you had to go without a glass screen, as so far it's the only style of case that covers the screen at all, but they're generally very good. in that respect, and I definitely feel alot safer when that type of case is on compared to any of the others.
I do like to have the choice though, so I often still buy other types of cases just for flavor and variety, but I tend to be more cautious these days whenever careful to only use them in situations that I feel would be less risky ever since that incident.
AnabolicAndroidz said:
Very true, Yeah, I've never had such problems when holding it in my hand to use it. (the time it happened to me I was actually watching videos in stand mode. Embarrassingly, I was in the toilet at the time, so reaching over for the paper I accidentally knocked it off the small cabinet it was resting on, and it fell down screen first. (No idea why I just shared that story in public, but completely true!)
Admittedly this is a very rare scenario, so is unlikely to ever happen to most people, but just explaining how it is possible, and why I have never dared to go without a glass screen protector ever since, even though there are other almost 99% foolproof ways to shield it. The wallet case is probably still by far the best type of case as a good backup way if you had to go without a glass screen, as so far it's the only style of case that covers the screen at all, but they're generally very good. in that respect, and I definitely feel alot safer when that type of case is on compared to any of the others.
I do like to have the choice though, so I often still buy other types of cases just for flavor and variety, but I tend to be more cautious these days whenever careful to only use them in situations that I feel would be less risky ever since that incident.
Click to expand...
Click to collapse
Embarassing stories are the best lol, always.. the best
I always use tempered glass when I can too, and I agree that variety is great, but you always need to be cautious!
Disclaimer : I do not benefit in any way for saying anything good or bad about these products. I am giving you guys my honest opinion on these cases to help provide some assistance on buying a case.
Let’s start with the first case I bought from them.
Orzly Flexicase (Clear)
Link to the case: https://www.amazon.co.uk/dp/B072MZCQB6/ref=cm_sw_r_cp_dp_T1_v8mFzb704M66R
Price :£12.99
Things I like: Simple case, adds much need grip to the OnePlus5. Doesn't detract from the overall phones aesthetic or feel. , Good lip around the camera bump and the front.
Things of concern: It's a simple case, it's mainly there to prevent scratches. Not going to protect your phone from anything major
Comments: I really like this case, there is a craft to a making something simple and effective and this is it. No fancy features it just protects your phone from scratches, adds grip and protects from small drops. It doesn't over stay it's welcome and I congratulate on that.
I was happy with my purchase at the price I paid but since it has gone down. I think anyone wanting a simple case you can't really go wrong with this.
Also like to note, I haven't had problems with any holes in the case. Some people on other forums have asked me about the quality of the finish. No evident problems with the finish of my case.
Photos: http://imgur.com/a/c8eOF
Orzly Wallet Case (Black)
Link to the case : https://www.amazon.co.uk/dp/B072QV1VRT/ref=cm_sw_r_cp_dp_T1_qInFzbCVEWP0X
Price: £14.99
Things I like: Protects the screen while it’s closed, Magnet keeps the wallet closed well, Effective card slots and pocket slot, Effective stand, I like the case that holds the phone in the wallet, not too bulky.
Things of concern: It’s a wallet case, people either love them or hate them.
Comments: I had this case for my HTC 10 and they have improved this case immensely. Now having three card slots instead of two allows me to take my bank card, ID and my public transport card without having to double up in the slots (That can create further issues). The main issue with last years was the case that held the phone in place. Last year was a hard shell, now throughout my time working with phones, more than half of wallet cases I have seen have broken inner shells because they use a hard shell inside. This year they have basically taken the great Flexicase design and used it as the holder for the wallet case. That was a great move and make the wallet case great.
For a wallet case, this is a solid wallet case. You can’t really go wrong with it.
Photos: http://imgur.com/a/j1FFv
Orzly Slim Stand Case
Link to the case : https://www.amazon.co.uk/gp/product/B073S7BWQQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Price:£12.99
Things I like: THIS THING IS SLIM, the case itself may be the lowest profile case I have used on the OnePlus5, The stand can withstand a lot, stand can be rotated in different ways.
Things of concern: This case may not work with some in-car phone holders, the stand bulges out and made it hard for my vent holder to hold it.
Comments: I picked up this case because I was intrigued. I didn’t think I would like it but I really did! The case has a really nice soft touch finish and provides protection for the camera bump which is surprising as the case is really low profile , it provides a very small lip on the front so it may or may not protect the phone from if you put your phone screen down. The case doesn’t really take much away from the buttons which is nice.
The ring stand is really handy, A couple of times I’ve used it. I do find myself playing with the ring stand itself and hanging my phone off my finger, the case fits very well I can trust that my phone will stay there hanging. The stand really is quite strong. I can put a lot of force on the stand and it didn’t feel like it would break, (I have posted a video demoing that) The things I would say is that I would like the stand to have different standing points, it would be nice to have the phone to stand at different angles, while this isn’t a major thing, I thought I’d point it out.
I really like this case, nuff said.
Photos: http://imgur.com/a/kHBlm
Video:
Orzly Fusion Case
Link to the case : https://www.amazon.co.uk/gp/product/B072MPYX9Y/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Price: £9.99
Things I like: Not bulky, feels like it would protect the case.
Things of concern: Can’t think of anything…
Comments: This is the case I have on my OnePlus5, I really like it. It’s like the FlexiCase but better. This honestly feels like this case has been designed by someone who’s wanting a make a case for themselves. There is extra grip points around parts of the case which your hand is in contact with. That’s a smart move. There is some little feet on the back around the clear back, this is a expert level move from Orzly, clear plastic scratches easily by doing this the plastic clear back from the ground. The clear back is quite hard and seems like it could withstand a drop, this is the motto of this case: it’s solid.
Photos: http://imgur.com/a/CqoVz
Comments About Orzly
One thing I have noticed is Orzly has revamped their packaging. It’s more like you would see in a shop and has nice little touches to them. Having a little tab to pull to open the box and having nice information (To read on the toilet obviously) adds to the over. Here is some photos : http://imgur.com/a/vZ4eu
Please ask any questions and if this helped someone, if you liked it I may do more.
Thanks so much for this. I agree with the flexicase and slim case, both have been great for me and I have already used the stand on the slim case for a train journey. Worked out great. I am looking forward to receiving my fusion bumper case from the reviews both you and niijonodhg have been giving!
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
If it helps, my favourite case so far has been the Fusion!
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
abe2912 said:
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
Click to expand...
Click to collapse
Getting both of them might be a good option. My favorite is the fusion but the slim case is really good. The slim case adds grip to the phone without much bulk or extraprotection where as the fusion is really grippy as well as adding more protection.
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
AnabolicAndroidz said:
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
Click to expand...
Click to collapse
Any stand is nice really, what I like about the slim stand case though is that you can put your finger in the ring and it will mean your phone cant drop, very useful actually
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
abe2912 said:
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
Click to expand...
Click to collapse
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
Looks really good with that dbrand skin! Glad to know you had the same sort of material that didn't yellow
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
That is beautiful!
Finally got my video up:
niijonodhg said:
That is beautiful!
Finally got my video up:
Click to expand...
Click to collapse
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
ab7casper said:
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
Click to expand...
Click to collapse
Thanks!
Hi:
Has anyone found a reasonably high quality case for the LG X Venture/X Calilbur V9?
I love my X Venture, but I've already tried 3 cases for it. The first case-a MiniTurtle was complete garbage-unusable.
https://www.amazon.com/gp/product/B06Y2KZPD9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The second one, a Spevert, sold on Amazon
https://www.amazon.com/gp/product/B073XCWJ6P/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
was almost usable, but provided minimal protection, and was also somewhat junky.
The third, a Zizo Bolt, looked to be quite well-made in many ways, and provides good protection. However, the buttons are inline or even slightly recessed from the edge of the case, and also stiff. That makes them extremely difficult to press. The case is also a little too slippery in the hand.
Does anyone know of a quality case for the X Venture? I'd prefer all TPU for grip, but two layers would be fine.
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Thanks Rich. Is it fairly thick as cases go, thin, or somewhere in between?
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
RichBordoni said:
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Click to expand...
Click to collapse
Shplad said:
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
Click to expand...
Click to collapse
It's decently thick, a little bit more than I expected, and it feels very sturdy. It's not one of those cheap thin cases. If I had to guess I would say it's somewhere around 1.5mm thick. I don't know if it's made out of TPU but the website says it's made out of a polymer material. It's flexible but still feels very sturdy.
I don't know if this will help at all but I took a picture of the back camera cutout so you can kinda get an idea of how thick the case is: https://i.imgur.com/BdDx5zo.jpg Like I mentioned before, to me it looks like maybe 1 - 1.5mm.
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Shplad said:
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Click to expand...
Click to collapse
Oh, if you're interested in one with a belt clip Pelican makes a heavy-duty case that comes with a belt clip I believe: http://www.pelican.com/us/en/product/phone-and-tablet-cases/lg-case/voyager/c31030 (a little bit too big for me)
Unfortunately it's not a super popular phone so our case options are a bit limited compared to, say, a flagship. Plus, it is a rugged phone so it does have some pretty good protection by itself.