Related
Help - I have an A1CS Fusion 5 tablet which I've managed to install CWM v6.0.3.1 but in the process of trying to install CM 10 or 9 I cannot get the tablet to boot into android, it always boots straight into the CWM recovery. This is common tablet which is identical to the Protab 2xxl which I've found a single rom image file but I'm unsure how to flash. I don't have access to a windows box to use livesuit as I hope there are equivalent Linux tools, but as a last resort I can borrow a win pc.
Within CWM I've tried to flash the CM 9 or 10 .ZIP which it claims to do successfully but it still boots into recovery. I've wiped all the data/cache/system/dalvik partitions many times before each install.
Through much fiddling I've found that I can gain adb access to the tablet whilst it is in CWM recovery mode, but I'm unsure what to do next? I've also found I can put the tablet into bootloader mode (black screen) and I'm able to read / write raw mem using rkflashtool, but I don't know how to split the single .img file or CM ROM .ZIP file into separate sections to flash each partition?
Although I'm fairly technical on Windows & Linux, I'm a newbie with Android so any help would be very welcome to avoid it becoming an expensive paper weight.
Thanks in advance
Andrew
hello everyone i need help with my mediapad 7 lite , i been searching for months and have not been able to install a single recovery like cwm twrp etc. would someone tell me what is going on , most guides stuck at fastboot and waiting for device . why is there so much shadyness would anyone post a good solution with tools etc? mediapad 7 lite s7-932u. well i hope i get a solution , i want install android lollipop , and by anymeans is there a rom for the bios to make the processor quad or dual . as simple as formating windows 98 or xp please.
I am sorry if you don't like my answer as I know your device is not the same as this TWRP but you may like to port it? or compile it?
I think you need to root your device as well otherwise you may struggle.
http://forum.xda-developers.com/showthread.php?t=2693100
Note this is tested on S7-931W while your post shows you are keen to get s7-932u.
If you use Linux you can download that TWRP, unpack it with imgRePackerRK
http://forum.xda-developers.com/showthread.php?t=2257331
then use Android to get info on where your recovery is and take a backup image of it
copy your stock recovery to Linux, unpack it with same tool as above, then swap in your kernel into TWRP and adjust the fstab and a few text files to match your ids
repack modified TWRP with imgRePackerRK and flash it.
making sure you have kept a backup on your removable sdcard.
good luck
Hi. I just want to ask about TWRP recovery that is Compatible with my Phone :
Starmabile PLAY Click
Android 5.1 Lollipop
Spreadtrum SC7731
4.5"
Quadcore
Anyone with a Phone with same specs as mine that is using A TWRP ?
Please help. I wanna try yours.
Cant find on google with the same specs with my phone with twrp working.
I have tried those TWRP on google but none of them works. All of them take me Only to the Bootlogo. Only thing i know as of now is i have to port twrp to my stock recovery or to my phone.
Anyone please help.
maucerezo said:
Hi. I just want to ask about TWRP recovery that is Compatible with my Phone :
Starmabile PLAY Click
Android 5.1 Lollipop
Spreadtrum SC7731
4.5"
Quadcore
Anyone with a Phone with same specs as mine that is using A TWRP ?
Please help. I wanna try yours.
Cant find on google with the same specs with my phone with twrp working.
I have tried those TWRP on google but none of them works. All of them take me Only to the Bootlogo. Only thing i know as of now is i have to port twrp to my stock recovery or to my phone.
Anyone please help.
Click to expand...
Click to collapse
Hi Bro,
i have sc7731c (karbonn titanium 3D Plex ) device too. and i have tried many available img but none of them worked this would be because these devices are new and there no suitable recovery available simply because people have not made any till now..
There is many programs that allows u to create a new custom recovery if there is no recovery is available for your device try to goggle it.
On windows, philz magic touch recovery tool, android kitchen recovery image unpacker and so on.
Can i make you custom recovery using your stock image if you're too lazy
as i said above i have been trying to flash online available recoveries and accidentally flashed my stock u could help me out this
can u provide me you stock recovery image file ?
@Maucurezo
Hey dude! Im a pinoy. Im running with my STARMOBILE PLAY CLICK. As same as yours. Im running on the same Spreadtrum SC7731C and I flashed a Custom Recovery but it would only bring me to bootload. I kept finding solutions to get my Stock recovery but failed. We have the same Problem. I need the Custom recovery too. Help us admins
You can try and do it yourself. Porting TWRP and CWM to a new device. You'll need the stock rom for your device or simply make an image "dump" of the system files (boot.img, etc) via adb. Goodluck.
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging you phone (DO NOT CHEAT PLZ)
ps:wen you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i run my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4-your device has to be in USB MTP mode
5-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command-adb devices
-if the device is detected a serial number apears
command-adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command-fastboot devices
-the device displays the serial number again
command-fastboot flash recovery recovery.img
- if all went well it will say successful
command-fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tool, a great ty to them :highfive:
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed bi the installation of the magisk15.3.zip and voila twrp+root
any one help me i port twrp using adb but after i flash my twrp upside down on sc7731ceb it works fine but the twrp upside down any help me
pauljack2 said:
any one help me i port twrp using adb but after i flash my twrp upside down on sc7731ceb it works fine but the twrp upside down any help me
Click to expand...
Click to collapse
humm,.. as far as i now adb does not port recovery image´s you mean you found an image for sc7731?? phone and there are at least 4 or 5 variations of the sc7731 board and you
flashed it on your phone, by shear luck you did not soft-brick or brick your phone and it actualy Works, :cyclops:
you need to search Google/xda/hovatek site for your brand and model´s stock recovery or even better your custom recovery
or as an alternative your stock ROM/FIRMWARE and then extract the stock recovery from ROM/FIRM port it and flash it
im prety shure someone out there has a phone like your´s and you can , when you find it download the stock recovery - the custom recovery - or the ROM/FIRMWARE file
the hovatek site has a great auto port tool all you need is your stock recovery follow the vídeo simple steps and flash it now that you have root just use
twrp oficial app to flash it ,se my tutorial above it will be easy once you have the stock recovery or rom/firmware
i have a 50 buck cheap phone wierd brand,it took me several days to find the stock rom/firmware once i did all worked just fine no strange stuff
hovetek site also has a lot of rom´s/firmware files for many brands and model´s , again search Google/xda/hovatek for your model + stock recovery or recovery.img, custom recovery.
good luck
i have stock recovery so i copy the recovery from my stock and i use carlivimg so i can unpack my recovery.img but i have really problem on upside down but i work fine i flash supersu on it now i have rooted my phone. my phone by the way is ding ding defi go SC7731ceb i use TWRP 3.0.2.0 it works fine but if you update the latest twrp you have problem on failed mount and .etc
ANY can help that upside down ??? thats my problem now on my recovery
but you can port recovery using fastboot
i commend
c:/adb>adb devices
adb>adb reboot bootleader
adb>fastboot flash recovery recovery.img
thats i port my recovery on sc7731ceb
using pc
pauljack2 said:
i have stock recovery so i copy the recovery from my stock and i use carlivimg so i can unpack my recovery.img but i have really problem on upside down but i work fine i flash supersu on it now i have rooted my phone. my phone by the way is ding ding defi go SC7731ceb i use TWRP 3.0.2.0 it works fine but if you update the latest twrp you have problem on failed mount and .etc
ANY can help that upside down ??? thats my problem now on my recovery
but you can port recovery using fastboot
i commend
c:/adb>adb devices
adb>adb reboot bootleader
adb>fastboot flash recovery recovery.img
thats i port my recovery on sc7731ceb
using pc
Click to expand...
Click to collapse
Go here https://forum.hovatek.com/thread-21669.html try and port again with this tool it worked fine for me.
Hello! i have used the search tool to see if there is a custom recovery for my device but i am unable to find any. I found TB-X103F custom twrp but im unsure about trying it!.
I may be rather early as this tablet only recently came out.
Lenovo X 104F- 1 GB RAM
I own the same tablet , found also a solution to root it . Just to try other Custom ROMs you do not need to root it ....it is project TREBLE compatible ! This means that you can , with fastboot and ADB , install various GSI images )
ATTENTION : this method does not allow you to go back easily to the factory ROM !!! If you wish to do so, you need to root your Tab and make a full backup with one of the solutions described here in XDA ! Titanium or so .
I have installed Lineage 15 (Oreo 8) on my device and it runs without any problem ......Custom ROMs based on Pie make still some issues ! Be aware , that for one or other reason on my tablet i can install only ROM that is less than 1 GB after unzip !!!
Artarun said:
I own the same tablet , found also a solution to root it . Just to try other Custom ROMs you do not need to root it ....it is project TREBLE compatible ! This means that you can , with fastboot and ADB , install various GSI images )
ATTENTION : this method does not allow you to go back easily to the factory ROM !!! If you wish to do so, you need to root your Tab and make a full backup with one of the solutions described here in XDA ! Titanium or so .
I have installed Lineage 15 (Oreo 8) on my device and it runs without any problem ......Custom ROMs based on Pie make still some issues ! Be aware , that for one or other reason on my tablet i can install only ROM that is less than 1 GB after unzip !!!
Click to expand...
Click to collapse
Care to share any links?
Since Lenovo/Motorola added our E10 / TB-X104F to the recovery tool I decided to play around with hacking apart this awesome and terrible table. Long-story-short... you can unlock it using the normal FASTBOOT commands. A MAGISK modified BOOT.IMG does work which gave me full root access to the tablet. If people are interested I'll write up a guide... but a little bit of research on MAGISK and grabbing the Lenovo recovery tool will be your first step if starting from scratch.
Next step is getting a recovery image. I'm currently looking into getting this tablet into the TWRP BUILDER queue, but at the time of this writing their queue is full.
UPDATE: Just saw the TWRP BUILDER team has had everything on hold for over a month now. Guess I'll need to see about building this locally in my free time.
kpfx said:
Since Lenovo/Motorola added our E10 / TB-X104F to the recovery tool I decided to play around with hacking apart this awesome and terrible table. Long-story-short... you can unlock it using the normal FASTBOOT commands. A MAGISK modified BOOT.IMG does work which gave me full root access to the tablet. If people are interested I'll write up a guide... but a little bit of research on MAGISK and grabbing the Lenovo recovery tool will be your first step if starting from scratch.
Next step is getting a recovery image. I'm currently looking into getting this tablet into the TWRP BUILDER queue, but at the time of this writing their queue is full.
UPDATE: Just saw the TWRP BUILDER team has had everything on hold for over a month now. Guess I'll need to see about building this locally in my free time.
Click to expand...
Click to collapse
I've been looking for one also and was gonna see about working on one
Artarun said:
I own the same tablet , found also a solution to root it . Just to try other Custom ROMs you do not need to root it ....it is project TREBLE compatible ! This means that you can , with fastboot and ADB , install various GSI images )
ATTENTION : this method does not allow you to go back easily to the factory ROM !!! If you wish to do so, you need to root your Tab and make a full backup with one of the solutions described here in XDA ! Titanium or so .
I have installed Lineage 15 (Oreo 8) on my device and it runs without any problem ......Custom ROMs based on Pie make still some issues ! Be aware , that for one or other reason on my tablet i can install only ROM that is less than 1 GB after unzip !!!
Click to expand...
Click to collapse
I can attest to this, I flashed the last Resurrection Remix Oreo GSI (12/21/18) and a (Magisk) rooted kernal I got from firmware (Lenovo MOTO Smart Assistant). And so far everything seems to be working fine.
So I also flashed resurrection remix pie gsi... it works as well... only thing is it doesn't come with gapps... and without twrp i can't flash a gapps package. The resurrection remix I used was the final oreo build... zt has gapps pre-installed... you have to register the device with google because it is not certified... but after that everything seem good. One thing to mention is both the oreo and pie builds are "go edition" so some features are missing because of that... one in particular I noticed is notification access for 3rd party apps... go edition devices don't have that feature
Do either of you all have a step-by-step guide to rooting the device and installing either the Lineage or RR ROM?
Also, what works and what doesn't on the tablet afterwards?
44Guest said:
Do either of you all have a step-by-step guide to rooting the device and installing either the Lineage or RR ROM?
Also, what works and what doesn't on the tablet afterwards?
Click to expand...
Click to collapse
Use Lenovo MOTO Smart Assistant to repair your tablet (you wont actually repair tablet, just using to get firmware)
Follow steps to get to download the firmware (it will save to ProgramData folder, its hidden folder... in widows anyway)
Take the boot image (boot.img) from firmware folder and transfer to storage on tablet
Instal magisk manager and use to patch the boot image you transfered from computer
Transfer patched boot image back to computer
Download the latest oreo gsi for resurrection remix or lineage
Use fastboot to unlock bootloader
Use fast boot to flash gsi
Use fastboot to flash patched boot image
Google anything you need help with...
I used the resurrection remix oreo also because there is a build that has gapps pre-installed... the pie version works but doesn't have gapps pre-installed and without twrp I couldn't find a way to install them
After tablet boots up install magisk manager and you will be rooted
You will need to register your device with google because it will not be certified... that was a pain to get done even though the process is pretty straight forward
So far only "issues" I have encountered are not actually issues they are due to the fact that the resurrection remix gsi is android "go edition" I haventr tried lineage because I like the customization options that resurrection remix offers
Here is the magisk patched boot image I made so you can skip that part...
https://www.mediafire.com/download/x4d3xp8w3e8bw3g
Just to confirm the sequence of events (and thank you for the magisk-altered file):
1. Move magisk-modified boot image to the tablet.
2. Download latest version of Lineage OS or RR; move that file to the tablet as well
3. DL magisk manager APK and move that to the tablet as well
3. Boot the tablet into Bootloader and flash the new OS file first
fastboot flash recovery file.img
4. Then flash the boot.img altered by magisk
fastboot flash recovery boot.img
5. Reboot the tablet (will it load with the new ROM?)
6. Install magisk manager
Questions on the flashing:
A: Do you flash the .img and the ROM through fastboot shell command on your computer or do you install them in recovery mode?
4niner4 said:
Just to confirm the sequence of events (and thank you for the magisk-altered file):
1. Move magisk-modified boot image to the tablet.
2. Download latest version of Lineage OS or RR; move that file to the tablet as well
3. DL magisk manager APK and move that to the tablet as well
3. Boot the tablet into Bootloader and flash the new OS file first
fastboot flash recovery file.img
4. Then flash the boot.img altered by magisk
fastboot flash recovery boot.img
5. Reboot the tablet (will it load with the new ROM?)
6. Install magisk manager
Questions on the flashing:
A: Do you flash the .img and the ROM through fastboot shell command on your computer or do you install them in recovery mode?
Click to expand...
Click to collapse
So you want all files on the computer at first...
When you unlock bootloader it will wipe the tablet.
Flash the the gsi image then the magisk patched boot image using fastboot (there are instructions on xda regarding flashining gsi... you have to wipe system before flashing)
After tablet reboots to resurrection remix move the magisk manager apk to the tablet and install it... open magisk manager and you should have magisk installed giving you root and so much more.
Before you attempt this make sure you familiarize yourself with all the steps... search google/xda.
Also... I will say this... I tried to just root the tablet first but it wouldn't boot after so I tried to fix it using the Lenove tool and it failed... flashing the resurrection remix gsi with the patched boot image saved me from a lot of headache and wasted time... I would prefer if it was not a "go edition" rom but its still better than stock.
Sorry, more follow-up questions:
1. My bootloader is unlocked. It did not wipe the device (I used the "developer options" in the "Settings" menu to do it. Fastboot indicates the bootloader is unlocked. Do I need to redo unlocking the bootloader? For what it's worth, all my attempts to flash everything with my presumably unlocked bootloader have been unsuccessful.
2. Where did you find a .gsi of Lineage OS 15 for the Lenovo TB-X104F? I cannot find one.
Thanks
4niner5 said:
Sorry, more follow-up questions:
1. My bootloader is unlocked. It did not wipe the device (I used the "developer options" in the "Settings" menu to do it. Fastboot indicates the bootloader is unlocked. Do I need to redo unlocking the bootloader? For what it's worth, all my attempts to flash everything with my presumably unlocked bootloader have been unsuccessful.
2. Where did you find a .gsi of Lineage OS 15 for the Lenovo TB-X104F? I cannot find one.
Thanks
Click to expand...
Click to collapse
Make sure you fastboot flash unlock and fastboot flash unlock_critical. Just look an here for the links for lineage gsi. It flashes just fine and is super easy. I have resurrection remix on my 104f. I'm trying to compile twrp for it right now but hard to do with kids lol also if you use the lenovo tool you can download the recovery files which has boot recovery and all that in it and you can use magisk to patch the boot.ing and then copy that to the Lenovo tool and replace the stock boot img then recover it and you now have a working patched boot.img. I went through the same thing
Any Luck?
Any luck with that twrp? I'm willing to test it out...
Would like to be able to use the resurrection remix pie rom with gapps. So I can hopefully give some helpful feedback... one warning I am an amateur at anything beyond using fastboot and some adb commands, but I can learn pretty quick if i have the time to spend...
Another warning I have a sub-par windows pc to work with (and its the wife's) it prob can't run Linux in VM.
Disable "go edition" in Resurrection Remix Oreo
Using root explorer...
Navigate to /system
Copy build.prop to internal storage
Navigate to where you saved copy of build.prop
Edit build.prop that you copied to internal storage...
Find ro.config.low_ram=true and change to ro.config.low_ram=false
Save and exit file
Copy edited build.prop back to /system (make backup of original and overwrite with edited one)
Set permissions to owner read write (rw-------)
Navigate to /sbin/.magisk/mirror/system
Copy build.prop to internal storage
Navigate to where you saved copy of build.prop
Edit build.prop that you copied to internal storage...
Find ro.config.low_ram=true and change to ro.config.low_ram=false
Save and exit file
Copy edited build.prop back to /sbin/.magisk/mirror/system (make backup of original and overwrite with edited one)
Set permissions to owner read write (rw-------)
Reboot
This allowed me to set notification access again (its disabled in "go edition")
Hey guys, I'm trying to follow the steps in this thread to install Resurrection Remix Pie on the tablet using fastboot but whenever I try to flash a ROM to the system partition I get a (remote: size too large) error.. Does anyone know why this could be? I've tried using flags like -S, I've wiped the partitions and I don't know what else I can try. I have tried with Lineage, AOSiP and RR GSIs.
Thanks.
I cant get this to work.. What version of RR or Lineage OS works with tb-x104f?
up..................
I got the final version of rr oreo running fine... no luck with the latest rr pie unfortunately...
Anyone know if this is an A or AB device?
Hello,
I just managed to generate TWRP recovery for S912 Android 9 version, you can install the official TWRP app to flash with in the ROM.
But after reboot the ROM goes back to stock recovery, so for now i am installing everytime i need to use recovery, unless i am able to find a permanent solution.
Link to TWRP
Suggestions welcome if you have for keeping the recovery persistent.
Regards
I was able to keep it persistent but if I go to install all I get for folder names is a mess. Using Superceleron's generic SC normal pie rom. Appeared to install magisk but magisk manager didn't see it and I lost superuser access so I had to reflash rom. I hope you or others can pick up on TWRP for this. Unfortunately I don't have the knowledge so can only test. Liking the Superceleron rom on my T95Z(2/16) much better than poison or stock (so far... still testing...). Glad to see these old devices getting some new love. Hopefully it will continue.
rickpub said:
I was able to keep it persistent but if I go to install all I get for folder names is a mess. Using Superceleron's generic SC normal pie rom. Appeared to install magisk but magisk manager didn't see it and I lost superuser access so I had to reflash rom. I hope you or others can pick up on TWRP for this. Unfortunately I don't have the knowledge so can only test. Liking the Superceleron rom on my T95Z(2/16) much better than poison or stock (so far... still testing...). Glad to see these old devices getting some new love. Hopefully it will continue.
Click to expand...
Click to collapse
Jumbled charcters is because the ROM is encrypted and this recoveery is not able to decrypt it.
Bumping this, going to test this on Aidans rom
Update: could not confirm if it works it looks like the reset button is not mapped on Aidans rom. The weird thing is it works if I use the USB burn tool but not when I do a regular boot.
Doctorbeefy said:
Update: could not confirm if it works it looks like the reset button is not mapped on Aidans rom. The weird thing is it works if I use the USB burn tool but not when I do a regular boot.
Click to expand...
Click to collapse
Do you mean we can flash using amlogic usb burning tool, I am now struggling to install this ROM on khadas 64 android 9 ROM by Highway star
Hi @eagledipesh!
I managed to install your TWRP successfully on Aidan's ROM, thank you very much!
First I unpacked the Aidan' ROM with the Customizatio Tool, then I replaced the original recovery with your TWRP. I repackaged the ROM and flashed it with the AMLogic USB Burning Tool.
With TWRP and I did a full backup and I was also able to restore without errors. However, after restoring and booting the system, it gets stuck on AndroidTV splash screen.
Maybe I need to port the correct TWRP, because when unpacking your recovery with AIK, I saw in one of the files that the model is gxm_q201_2g, but my Android Box is gxm_q200_3g.
1. What base TWRP did you use to create your TWRP?
2. I tried porting TWRP myself from Aidan's ROM recovery, I can even get into recovery, but the letters are all scrambled. Can you help me make my own port?
ulissesemuman said:
Hi @eagledipesh!
I managed to install your TWRP successfully on Aidan's ROM, thank you very much!
First I unpacked the Aidan' ROM with the Customizatio Tool, then I replaced the original recovery with your TWRP. I repackaged the ROM and flashed it with the AMLogic USB Burning Tool.
With TWRP and I did a full backup and I was also able to restore without errors. However, after restoring and booting the system, it gets stuck on AndroidTV splash screen.
Maybe I need to port the correct TWRP, because when unpacking your recovery with AIK, I saw in one of the files that the model is gxm_q201_2g, but my Android Box is gxm_q200_3g.
1. What base TWRP did you use to create your TWRP?
2. I tried porting TWRP myself from Aidan's ROM recovery, I can even get into recovery, but the letters are all scrambled. Can you help me make my own port?
Click to expand...
Click to collapse
I used one of the twrp port guides, twrp was stock one, with stock recovery extracted from initial Android 9 builds by Highway star'
You can use the official twrp as base and then recovery from any of rom for your device
eagledipesh said:
I used one of the twrp port guides, twrp was stock one, with stock recovery extracted from initial Android 9 builds by Highway star'
You can use the official twrp as base and then recovery from any of rom for your device
Click to expand...
Click to collapse
Are you talking about the Wiko Highway Star? Any special reason for using this ROM as a base? How do I know which version of TWRP to use?
i create a twrp for my amlogic T972 but can't boot into it, don't know where to start fix bug
Can you help me build a twrp for this? Or can you teach me do that? Thank you @eagledipesh
Is there now a working TWRP for the Yoka KB2 Pro 3gb on Android 9.0? I would prefer to have an img file, but if there is really no other way, I would also take the zip version.
Thank you and best regards