Twrp + ROM For Honor 5x - L24 varriant - Honor 5X Questions & Answers

Hi,
I want to install twrp in my 5x l24 us version. I read some threads here at XDA about twrp and rooting of honor 5x. But I am not sure where to start. I am hoping that someone here can guide me a little. I currently have emui 4.0 with marshmallow official from huawei.
My questions are:
1. Should I make nan droid backup of my phone before proceeding to install twrp? I am not sure what exactly is nan droid backup.
2. Is there any risk of device being bricked during the installation of twrp?
3. I read a thread named twrp for l24 l22 l23 and so on.. Does this method work anymore? Because I see users complaining about some twrp issues.
4. What are the safety measures I should do before doing any rooting, flashing?
Note - I don't do much rooting or flashing stuff that's why I am asking here. Thank you in advance

abbas99 said:
Hi,
I want to install twrp in my 5x l24 us version. I read some threads here at XDA about twrp and rooting of honor 5x. But I am not sure where to start. I am hoping that someone here can guide me a little. I currently have emui 4.0 with marshmallow official from huawei.
My questions are:
1. Should I make nan droid backup of my phone before proceeding to install twrp? I am not sure what exactly is nan droid backup.
2. Is there any risk of device being bricked during the installation of twrp?
3. I read a thread named twrp for l24 l22 l23 and so on.. Does this method work anymore? Because I see users complaining about some twrp issues.
4. What are the safety measures I should do before doing any rooting, flashing?
Note - I don't do much rooting or flashing stuff that's why I am asking here. Thank you in advance
Click to expand...
Click to collapse
It's all already answered, but OK.
0. You must unlock your bootloader before any of those,
1. you can try just booting into TWRP (fastboot boot recovery.img) and try backing up everything from there. I'm not sure that one works, I simply flashed TWPR and continued backing up from there,
2. No way you can brick it if you go by instructions; follow simple instructions from TWRP thread == recovery flash without issues. This device is flash-friendly
3. This one? That would be an official TWRP thread, so... it works, my L21 is on latest 3.1.1 build.
4. Always have a backup and don't flash anything you're not sure it will work and that's it. So, you've freshly flashed TWRP, first thing would be to make a system backup, that way, if anything goes wrong with rooting or custom ROMs, you can always go back to stock one without hastle.
Hope that helped.

ShadySquirrel said:
It's all already answered, but OK.
0. You must unlock your bootloader before any of those,
1. you can try just booting into TWRP (fastboot boot recovery.img) and try backing up everything from there. I'm not sure that one works, I simply flashed TWPR and continued backing up from there,
2. No way you can brick it if you go by instructions; follow simple instructions from TWRP thread == recovery flash without issues. This device is flash-friendly
3. This one? That would be an official TWRP thread, so... it works, my L21 is on latest 3.1.1 build.
4. Always have a backup and don't flash anything you're not sure it will work and that's it. So, you've freshly flashed TWRP, first thing would be to make a system backup, that way, if anything goes wrong with rooting or custom ROMs, you can always go back to stock one without hastle.
Hope that helped.
Click to expand...
Click to collapse
Hey I had EMUI 4.0 so Android 6.0.1 installed. So I unlocked bootloader and installed twrp without doing a backup. But now there is a big problem. No custom Roms will ever boot. So I cant boot to any rom and don't have a backup.

Florian990107 said:
Hey I had EMUI 4.0 so Android 6.0.1 installed. So I unlocked bootloader and installed twrp without doing a backup. But now there is a big problem. No custom Roms will ever boot. So I cant boot to any rom and don't have a backup.
Click to expand...
Click to collapse
Um, you did a clean install? I see you're from Germany, so I guess you're using KIW-L21 model, which is fully compatible with all ROMs out there (and it still didn't receive VoLTE update if I'm not wrong). Try clearing everything and flashing again, if not, restore stock recovery via fastboot and do a emergency reflash of full EMUI firmware.

ShadySquirrel said:
Um, you did a clean install? I see you're from Germany, so I guess you're using KIW-L21 model, which is fully compatible with all ROMs out there (and it still didn't receive VoLTE update if I'm not wrong). Try clearing everything and flashing again, if not, restore stock recovery via fastboot and do a emergency reflash of full EMUI firmware.
Click to expand...
Click to collapse
Yes I did a clean install with Aosp Rom, LineageOS, Ressurection remix, XenonHD Rom but every Rom encpountered a bootloop where the animation ran for 10 seconds and then stopped. After that the phone rebooted and so on . And do you have a link for flashable L21 EMUI stock rom? And stock firmware only installable with stock recovery or TWRP?

I also encountered this situation, how to solve, help me! Thank you

风雷萨斯 said:
I also encountered this situation, how to solve, help me! Thank you
Click to expand...
Click to collapse
Can u explain what u did clearly ?

Related

KII-Lxx Models

Hi i have a GR5 KII-L33 model (single sim), can i use any rom for kiw-l21, l22, etc. (CM13 and others)?
do i need to do extra steps? i dont want to brick my phone :silly:
Hey
make sure that you take full stock backup before flashing the ROM
use fastboot boot twrp.img to run twrp without replacing stock recovery then backup everything
after that you can flash twrp with normal command then flash cm
after flashing the ROM, you need to follow these steps here, to get your single sim working
I answered you in cm thread and here to talk more [emoji14]
And yes you can use any CM/AOSP Roms, don't mess around with stock roms
Sent from my KIW-L21 using Tapatalk
AL_IRAQI said:
Hey
use fastboot boot twrp.img to run twrp without replacing stock recovery then backup everything
after that you can flash twrp with normal command then flash cm
Click to expand...
Click to collapse
hi, just curious about the backup everything.
does TWRP backup our stock recovery partition? because you said that we have to boot twrp then backup everything. i wonder if we restore using twrp, will our old/original recovery return? i know that we can use update.app to restore stock recovery and rom.
i am new to this huawei device since i've been using htc one x and did flash custom rom also twrp. but my device is KII-L22 and keen to flash crpalmer's CM.
thanks.

Latest Cyanogenmod doesn't work.

Hi.
So the latest Cyanogenmod (honestly every update out of the CM update that came out on 9th Oct) builds do not work for my device. Whenever I try to boot up the device, the device just gets stuck on the bootup screen, that is the screen where you see the OnePlus logo and there's text in the lower part that says "Powered by Android", except that there is no "powered by Android" text seen.
What should I do in order to get things working?
Sorry to post this in the general thread, I am not yet high enough that I can post in the Android Development Thread.
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Loureiro said:
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Click to expand...
Click to collapse
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
sundhar88 said:
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
Click to expand...
Click to collapse
Alright thanks! If I face any problems I'll post again!
aamodjoshi23 said:
Alright thanks! If I face any problems I'll post again!
Click to expand...
Click to collapse
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
sundhar88 said:
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
Yup. You need to first flash the OOS recovery and then you need to flash the OOS 3.1.3 and then again the TWRP and then you need to flash whichever ROM you want to... Been there, done that. Real pain...
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Loureiro said:
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
You're a lifesaver dude! Thanks for the link!!
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Adesh15 said:
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Click to expand...
Click to collapse
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Install opx_recovery, flash 3.1.3 from recovery. After installed you can fastboot flash Blu sparks latest or Nichets twrp done.
Cretandus said:
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Click to expand...
Click to collapse
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Cretandus said:
Hi all,
I�¢??m having the exact same problem. I�¢??ve searched several forums, and have seen different solutions, but I�¢??m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don�¢??t want to make any mistakes. I�¢??m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I�¢??m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
What I did was, first of all, I took the backup using Titanium Backup and took a nandroid backup. Then I already had downloaded the files required, that is the BL zip file, the TWRP recovery, and the latest CM 13.0 build. Then I went to recovery > install and then located the BL and flashed it. Then I tried to flash the TWRP recovery but it didn't. Gave an error saying, "Unsuccessful" or something on those lines.
So I took that TWRP img file and copied it on my laptop. Then I went into the bootloader, which at first I thought was a bad idea since I just flashed the BL zip, then I flashed the new TWRP img file and went to recovery mode. And it had worked. So I flashed the CM 13.0 build too and then booted up the device, and it worked!
I guess that should help
aamodjoshi23 said:
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
Click to expand...
Click to collapse
I'm glad it worked for(don't forget to drop a thanks and a vote would be good too)
Also for next time,please search the forums before creating a thread.:angel:
Adesh15 said:
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Click to expand...
Click to collapse
Adesh15, it worked! Thank you very much!
Cretandus said:
Adesh15, it worked! Thank you very much!
Click to expand...
Click to collapse
Great !

Issues reinstallling Custom Recovery

Hello everyone, long time lurker here. I have used xda over the course of many years with many different devices, and I am extremely grateful to all of you!
I recently cam across an issue. So with my OnePlus X I had unlocked it, rooted it, installed TWRP and a custom ROM (6.x.x). I had that setup for a while, it worked well, and I enjoyed it. I decided to try to update to a 7.x rom, but that is when I had issues. Trying to install the rom through twrp didn't work, and I couldn't revert back to the old rom either. I tried to use the master unbrick thread to set it back to stock, and it worked. The problem here is the stock rom is very broken, things like the OPX home launcher simply freeze and crash. Trying to usethe guide on the oneplus website to unlock it all again to reinstall TWRP doesn't work. I can unlock it, but installing recovery is where it screws up.
So it says it installs, but then when I try to reboot recovery it has a DTB: not found...manually rebooting to recovery leaves a black screen with the oneplus square logo.
Any ideas how to fix this? I am so lost, but I love this phone!
Fastboot flash old stock recovery from OOS2 wipe data and cache install 2.2.3 followed by 3.1.4 then make sure your flashing latest TWRP 3.0.3 from there site. Now should be able to flash Nougat.
Exodusche said:
Fastboot flash old stock recovery from OOS2 wipe data and cache install 2.2.3 followed by 3.1.4 then make sure your flashing latest TWRP 3.0.3 from there site. Now should be able to flash Nougat.
Click to expand...
Click to collapse
Good work sir! Mind you it probably be far easier for him to just
Code:
fastboot flash recovery 3.0.3.28w/e.img
fastboot boot recovery 3.0.3.28w/e.img
And then just plonk a nougat zip onto his device from the TWRP plugged into is computer?
Archtects said:
Good work sir! Mind you it probably be far easier for him to just
Code:
fastboot flash recovery 3.0.3.28w/e.img
fastboot boot recovery 3.0.3.28w/e.img
And then just plonk a nougat zip onto his device from the TWRP plugged into is computer?
Click to expand...
Click to collapse
No because he needs to upgrade the bootloader first to have a TWRP 3.0.3 that works OK.
Kéno40 said:
No because he needs to upgrade the bootloader first to have a TWRP 3.0.3 that works OK.
Click to expand...
Click to collapse
True true.

Please help answer this

My question is that if I try to flash a custom rom(I guess Havoc OS) after unlocking my RN3's bootloader "unofficially" with this guide.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Will i get a boot loop?
And to avoid that what should I do?
I don't want to go for official unlock tool, it takes 360hr I can't wait that much.
Please I don't want to brick my phone.
Thanks in advance
Please help
Vijay G said:
My question is that if I try to flash a custom rom(I guess Havoc OS) after unlocking my RN3's bootloader "unofficially" with this guide.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Will i get a boot loop?
And to avoid that what should I do?
I don't want to go for official unlock tool, it takes 360hr I can't wait that much.
Please I don't want to brick my phone.
Thanks in advance
Please help
Click to expand...
Click to collapse
Havoc got bootanimation bug. May take time on boot.
U Flash arrow OS. best battery.
First update ur phone to latest miui 10.
Then unlock it using ur method. After unlocking U will be on zcx old recovery.
Now download Flash below twrp latest 3.2.3 official.
https://dl.twrp.me/kenzo/
Go to new latest twrp
Format data. Type yes to format. Will delete data and internal sd.
Then wipe data reset
Flash Arrow os
Flash pico or nano gapps
Reboot
Thank you very much for replying sir,
I have 2 more questions.
1. If I unlock unofficially and install zcx twrp, and then how will i install official TWRP that you mentioned 3.2.3 version safely without any bootloops or stuck?
2. After installing official TWRP, if I try flashing ArrowOS, is it possible to get bootloop after flash (because some people say they hard bricked their phone after flashing Roms after using unofficial method)?
Vijay G said:
Thank you very much for replying sir,
I have 2 more questions.
1. If I unlock unofficially and install zcx twrp, and then how will i install official TWRP that you mentioned 3.2.3 version safely without any bootloops or stuck?
2. After installing official TWRP, if I try flashing ArrowOS, is it possible to get bootloop after flash (because some people say they hard bricked their phone after flashing Roms after using unofficial method)?
Click to expand...
Click to collapse
Just go to zcx recovery.
Click Install
Press select image
Select twrp 3.2.3 img file.
And flash
Reboot to recovery again
U have latest recovery

Unistall TWRP and make ONE Plus 6t like factory-made to claim warranty.

So i was trying to root my Oneplus 6t that was running OXynogen 10.3.4 Android 10 using TWRP & MagicSk.I read a tutorial somewhere explaining how to install TWRP recovery & then flash Magicsk.I successfully installed TWRP recovery on my phone using cmd with the help of fastboot.However, when i tried flashing Magicsk using TWRP,i got an error "KEY VERIFICATION FAILED".Now, i don't plant to proceed with rooting my phone any further.Can someone please tell me how can i undo all of my actions and get my phone back in original condition as it was when i purvhased.Like pure stock android with no TWRP,No unlocked bootloader...Just like a phone's software looks when purchased new.
TWRP can't get uninstalled. You've to flash Stock ROM to get rid off of it.
jwoegerbauer said:
TWRP can't get uninstalled. You've to flash Stock ROM to get rid off of it.
Click to expand...
Click to collapse
How do u suggest i flash the custom ROM? Will i have to do it using TWRP? Oneplus gives a .zip file of stock ROM on its website.Also will doing this lock my bootloader again?
@Illicit_Lokesh
I thought I made it clear.
FYI: Recovery and ROM are two completely independent different things.
No one needs a custom recovery as TWRP to flash Stock ROM: This can be done with Android SDK tools like ADB and Fastboot.

Categories

Resources