I have a Samsung Tab E, t560nu. The problem is I cant get around verifying google account.
I used odin and downgraded to android version 5.1.1. I then tried using the otg cable method and sidesync both did not work. I can't use realterm because the tablet cant make calls. Also octoplus doesn't have my model since its not a phone.
I also tried to root it but can't because it was blocked by frp.
I'm not sure what I should try next, please help.
Related
I have a fake version of samsung galaxy tab named gamexy tab and it has a problem with so many unlock attemps, its usb debugging is off and also the jerk user didn't logged with a google account to sign in and unlock the pattern,the only way i think is to update firmware or flash it,but is there any firmwares for it? help please
I haven't seen anything concerning FRP around the site for the past couple months, I was wondering if anything new has popped up.
I've tried all the older methods, which have all been shut down by the latest update, and I cant root or flash a custom rom now because my bootloader is locked.
I'm just looking for anything that could help so I don't have to wait for the next couple days for my phone again..
Thanks in advance!
There is no universal method. It all depends on the update, phone, and carrier that it's from.
FRP Bypass methods not working on SM-T377W
I have recently purchased a second hand Samsung Galaxy Tab E (SM-T377W) from kijiji in Canada, but, to my dismay the FRP has been tripped. I have tried to follow ashyx and rootJunkie but even with an otg cable I am not able to access the settings/browser.
I have searched everywhere (I can think of) but am unable to find a stock firmware. any assistance would be appreciated.
Device:
Name: Samsung Galaxy Tab E
Model: SM-T377W
F/W: MMB29K.T377WVLU2API2 (gtesltebmc)
Country: Canada
I'm not sure what other info is useful, so I will reply as prompted.
Thanks in advance
Me too
Me too bud, the Sm-377w is locked down tight. Have tried everything. EMail me [email protected] if you have any answers
Not sure if this is the right place to go about asking my question but any help would be really appreciated. So I recently bought a Verizon Galaxy Note 5 from a third party and of course its FRP locked. I tried bypassing it with the program realterm however when i connect to the phone via realterm the program says it connected, says it transmitting when run the at+cerg?\r\n atd1234;\r\n commands but the phone doesn't respond. All the newest correct usb drivers are installed for the phone. So I was gonna try downgrading the firmware but cant figure out how to find out which firmware its even running since all i can see right now is the frp lock. Thanks in advance.
Please help me to resolve the FRP for my google account on my Samsung S9+ which I've encountered.
I have A Canadian S9+ model SM-G965W and downloaded the following Combination Files including the the American version which i read on a forum would work for the Canadian version so that I can get into the phone to gain develop access, factor reset and flash with original ROM. I have downloaded the following combination files: Combination_FAC_FA80_G965U1QU1ARBA.ZIP, Combination file G965WVLU1ARBG_G965WOYV1ARBG_GLW and file Combination_OXM_FA80_G965FXXU1ARB7_OXMFAC_CL13084894_QB17151834_REV01_user...rar which I downloaded off the web. Just to note I used 7 Zip software to unpack these zip files into .tar format for odin3. The firmware/bootloader i downloaded from Sammobile was G965WVLU1ARBG. When I try to flash any of these Combination files above with ODIN3 V3.13.1 it gives an error code after a few minutes of doing nothing. I have downloaded the samsung driver for mobile phones.
The error code in Odin3 is "Can't open the serior(COM) port. Please help me why i can't flash the combination to access my phone? What is going on with this error is it because I'm using the wrong combination file for S9+ Canadian verison?
Please help me resolve my problems to fix my phone so i can gain access to it. I'm new to the community and the whole process of flashing/routing phones.
thanks
:crying::crying::crying::crying:
Make sure you installed the samsung USB driver and have the phone in download mode.
Also USB debugging needs to be enabled. If you can enable developer options under settings and toggle USB debugging there. Otherwise unless you have somehow or another fudged it good just boot the phone normally and obtain the Google account information to access the phone. Then when you gain access be sure to factory reset it normally as to remove that lock.
There are videos and etc. on YouTube which discuss using some sort of automation application to enable USB debugging... I dont kmow if that is safe or if it works. Personally I would just get the person who had the Google account to disable the FRP lock, factory reset it.
Otherwise there are 3rd party pay for services that help with the FRP lock.
hi all,
I have Samsung SM-G935W8 (in Canada), bought used from someone. recently, try to play with android, and realized the phone PDA was G935UUEU4BRD1, and model was SM-G935U which is different from the model that showing on back cover. think the guy flashed a different rom for this phone.
couple days ago, I did hard factory reset for no reason, and get google account locked. then search online and learning how to fix it. seems like need to flash combination rom --> use tool bypass frp --> flash official rom to solve this issues.
i downloaded many combination firmware and all failed on odin flash. until i use one that allowed me to flash and success to open the phone as Factory Binary. But, I noticed the phone model changed to SM-G935A, which is AT&T firmware. the android version is 6.0.1, when I try to run program to do FRP bypass, no luck, think that because I can't turn on OEM- Unlock option(can't find it on developer option tough)? or bootloader locked?
now, I can only flash official rom that from AT&T, and android 8 that I can find it. if the phone can be fixed FRP issues, model change to G935A is fine, I dont care that model, I dont use the phone for call, only for wifi and camera. and maybe later can play flash to other model of ROM. not sure if possible.
current, the working combination rom I flashed is PDA : G935UUCUBATA1
ADB FRP to bypass FRP (not working)
and flashed to AT&T rom PDA: G935AUCUBCTB1_G935AATTBCTB1_8.0.0
FRP still not bypassed, and stuck on google account validation screen. any advice how and what tools can bypass FRP for this phone now model is SM-G935A? thanks in advance!