I'd like to extract the modem from the CP for Cricket posting in this forum and installing it on my 930T that I'm using U code on. Cricket is my carrier and I want to see if it gives me better reception. Does anyone know of a how to for this?
Related
since moving from 2.3.3 to to 2.3.5 ive had stability issues and signal drop outs.
ive kept the kf2 modem during the change over and suspect that i may need to upgrade the modem to the latest version compatible for telstra and i will also move to 2.3.6 (stock) soon.
what is the latest modem version that works nicely with telstra's 3g network in AU.
Both Voda and Telstra sell the I9100T which uses a different modem to the international model. Last I heard, the latest modem was released by Voda - I9100TDUKJ1.
But you might want to check / ask on the Aussie forum below.
http://forum.xda-developers.com/showthread.php?t=1166701
There is also a modem thread which has all the worldwide T model modems.
Edit: modem thread. Check post 3
http://forum.xda-developers.com/showthread.php?t=1131950
I find i get best speeds and stability with DXKL1
Here is the link
http://www.multiupload.com/IQB1391ZVO
Is the file above able to be flashed via odin or is it for a rooted phone with clockworkmod?
At this stage my phone isnt rooted.
CW. If you want to flash it with Odin, extract the modem.bin file & put that in the "phone" section of Odin & away you go.
anark1 said:
Is the file above able to be flashed via odin or is it for a rooted phone with clockworkmod?
At this stage my phone isnt rooted.
Click to expand...
Click to collapse
so .bin will work fine in the phone section of odin.
shouldnt it be in the tar.md5 format?
Hello!
Probably it's not the perfect thread to post in, but i've got an Ace with signal problems. I'm on 3 UK network, and so far i know, there's only 2.2 branded firmware issued for this device. I have that in md5 format, which i can flash through odin, however that is a [email protected] Is there any way to flash the csc from that to any gingerbread version? as it is in .rfs format, and odin does not really like it. Is it affecting in any way my phone if i flash that to a gingerbread format, or ICS if i can? If so, could you tell me how to do it? Or how to solve my network signal issue? So far itried it with CM7, CM9, but it was still bad. I mean i did not have any signal, however in my I9100 there's almost full coverage in the same place, and i'm not using stock rom on that one. I just flashed the modem from the carrier branded firmware, but to flash on that device is much more easier, as there is many source for the modem file in the correct format.
So to make it clear, i need someone to help me to solve network issue (3 UK) in any way like flashing somehow the modem from old 2.2 (if that's possible), or if someone can point me a firmware with working "radio"/modem. Thanks in advance!
Sent from my GT-I9100 using XDA
Hey guys,
I've been doing some reading and trying to work out the best way to dump a copy of my CSC so that if I flash in a new custom rom from another country that has JB that I can then load in my original CSC to get the settings back.
I've seen this thread http://forum.xda-developers.com/showthread.php?t=1106502
But one of the first things it says to look for CSCFiles.txt doesn't exist on my S3.
Is there a better method for backing this up? Additionally would like to backup my modem just to be 100% sure so ran through another thread to backup the modem (http://forum.xda-developers.com/showthread.php?t=1705650) but the backup image came out significantly larger than the other modem files I have downloaded and the MD5 doesn't match what is supposedly the same version modem.
And one more question, I found some time ago a really good thread explaining the firmware versions as there is B firmware and C if I recall correctly and the relation of these to the modems and why flashing the wrong one can have issues. I haven't been able to locate that thread again to bookmark it, if anyone can point me in the direction of this it'd be awesome.
Beacuse there is none..all the Firmwares are more or less same with little region specific customizations..
You can flash any firmware if you are okay with the region specific changes..
There is no need to backup your modem you can get it easily from here..just note which modem you are using currently..
CSC again does not make much of a difference other then providing you with region specific customization and updates.....you dont need to back it up ..you can change you CSC using dialer or CSC changer from the market..
zoot1 said:
Beacuse there is none..all the Firmwares are more or less same with little region specific customizations..
You can flash any firmware if you are okay with the region specific changes..
There is no need to backup your modem you can get it easily from here..just note which modem you are using currently..
CSC again does not make much of a difference other then providing you with region specific customization and updates.....you dont need to back it up ..you can change you CSC using dialer or CSC changer from the market..
Click to expand...
Click to collapse
I understand I can flash any firmware, hence asking about the CSC's to be able to retain my regional customization's.
Modem was more a paranoia of making sure what I have is exactly what is available on here. E.g. pull it out MD5 and compare. I'd rather be sure and pull the modem out myself and confirm.
I had seen references to B type firmwares and about using specific modems with certain firmwares for compatibility.. Hence the question regarding this.
I've got the CSC changer but isn't that only able to change the CSC to the ones in that firmware? From looking at the firmware list in some of the reference threads that listed the CSC's they came with they didn't list my region.
Basically I want to know that when I flash in another firmware, in this case the 4.1.1 from the UK that I can load in the CSC and get the region specific customization's back and at the same time have a route back to the original modem and firmware that I have taken backups of myself.
With that all said the modem issue is sorted but still need to confirm I can migrate the CSC from my current firmware to the new.
claymen said:
I understand I can flash any firmware, hence asking about the CSC's to be able to retain my regional customization's.
With that all said the modem issue is sorted but still need to confirm I can migrate the CSC from my current firmware to the new.
Yes copy your original CSC folder and files to the new rom then flash it .
jje
Click to expand...
Click to collapse
Hi Everyone,
Several questions for you. I have a Galaxy SIII i9300 and I'm
New to Android here, although I have had a few years with WM phones, this is all new to me. Been reading , reading and learning.
I would deeply appreciate it if someone would help me with these questions:
1.) Can someone please tell me where I can find what my alpha 3-digit country code is? (the codes as listed on SamMobile site) I already know about using *#1234# to find AP, PDA and CSC but not where to get these country codes.
2.) Where can I dl my country code's Stock firmware for backup? I've searched XDA forums but all that I've been able to find is Singapore Stock ROMs in the XDA forum. My particuliar stock ROM has an updated date of Jan 14, 2013, maybe this Stock ROM isn't available yet?
3.) If I dl the SamMobile firmware for my country code will it be compatable with the XDA forum's instructions for Newbys? (so that I can flash back my stock Rom either with SamMobile's Stock dl's or XDA's Stock ROMs? ), in other words is there a difference between flashing SamMobile's Stock ROMS and XDA member's posted Stock ROMs?
4.) Can I use ANY odin3 version or are the different versions that are ROM-specific? Will any Odin3 versions work equally well with any ROMs?
Any finally Thank You!, to all of you for your dedication and support and most importantly your help. - MobiManiacs
1. That's what CSC is
2. sammobile
3. yes
4. firmware IS a ROM, it'll replace the current one
I Need Some Clarification Please
Glebun said:
1. That's what CSC is
2. sammobile
3. yes
4. firmware IS a ROM, it'll replace the current one
Click to expand...
Click to collapse
Thank You for your response Glebun. I can't see your Thank You Button to hit as I have a piece of software running in the background that was designed to strip-out some of the html coding on all web-sites and I'm not certain that it can be temporarily turned off at this point. I will work on it. So I will have to say Thank you this way then.
I think i figured out some of my own questions, such as the first one, and I believe that I can find this answer by *#272* IMEI#. I would think it can only be found if my phone is rooted, as I tried on a Stock non-rooted phone and doesn't work.
On my question 2.) When I use SamMobile Stock ROM there are 2 files in the package, do I need the SS_ DL.dll file AND the tar file for Odin?
On my question 3.) So what you are saying then is that there is no difference if I use SamMobile's Stock ROM or the same CSC ROM posted by a XDA member? SamMobile ROM and XDA posted ROM are the same then?
On my question 4.) So can I use ANY version of Odin3?. There are many versions of Odin3 available.
Again,
Thanks
MobiManiacs said:
Thank You for your response Glebun. I can't see your Thank You Button to hit as I have a piece of software running in the background that was designed to strip-out some of the html coding on all web-sites and I'm not certain that it can be temporarily turned off at this point. I will work on it. So I will have to say Thank you this way then.
I think i figured out some of my own questions, such as the first one, and I believe that I can find this answer by *#272* IMEI#. I would think it can only be found if my phone is rooted, as I tried on a Stock non-rooted phone and doesn't work.
On my question 2.) When I use SamMobile Stock ROM there are 2 files in the package, do I need the SS_ DL.dll file AND the tar file for Odin?
On my question 3.) So what you are saying then is that there is no difference if I use SamMobile's Stock ROM or the same CSC ROM posted by a XDA member? SamMobile ROM and XDA posted ROM are the same then?
On my question 4.) So can I use ANY version of Odin3?. There are many versions of Odin3 available.
Again,
Thanks
Click to expand...
Click to collapse
2) You need the .tar file to flash via Odin
3) There is no difference, if it is the original ROM, nevertheless some original ROMs here on XDA are for instance pre-rooted, the thread should tell you anyway
4) I guess the newest version should work? Have a look in the Odin How-To threads
How Do You Now Get The Country Code Now That It's Blocked?
chrismast said:
2) You need the .tar file to flash via Odin
3) There is no difference, if it is the original ROM, nevertheless some original ROMs here on XDA are for instance pre-rooted, the thread should tell you anyway
4) I guess the newest version should work? Have a look in the Odin How-To threads
Click to expand...
Click to collapse
I appreciate your clarification Chrismast.
I read somewhere that the *#272*IMEI# has been blocked by Samsung on the latest firmware updates. Can anyone confirm this? If this is true then how can we know the 3-digit alpha country code of our current stock ROM? Is there a fix or safe file to apply, or maybe another method?
So any luck on this one. I have searched all over and still can't find an answer. Did you ever figure out how to find the country code. Here in South Africa there are three options. South Africa - XFA, South Africa - XFE and South Africa - XFV. Would be awesome to know where to find the code for my phone.
Did you try to dial *#1234#?
It works on my i9305....
That gives me all other info but not the 3 digit code after the country.
Anyway seems I answered my own question. Decided to install kies. Something I have almost never used. Seems when you install KIES and connect your device it gives you all the info and the 3 digit code you see after the country on Sammobile.
Hi all. My first post! Apologies in advance for asking something that seems it should be here, but seems is not. After tireless searching, it seems there is no stock roms for GT-S5360T for Australia (Telstra CSC(? I think?). Please please if anyone knows of the location of any please link for me???
Ok so I've read through a lot of the forums here and I've figured that I had the Austrian stock Rom originally (55360TAJKK3). I have flashed the firmware to it and it's back to it's original state except one thing. There's no network. Telstra is listed under the APNs but I'm assuming it's Austrian telstra and it's because I don't have the right CSC file? Is this right? Is there a CSC file anywhere for ZSA for this? I've looked throug Doky's thread but can only find this rom. Can I flash just a CSC file to my phone without the modem and pda if I do happen to find it?
This worked for me.
tam774 said:
Hi all. My first post! Apologies in advance for asking something that seems it should be here, but seems is not. After tireless searching, it seems there is no stock roms for GT-S5360T for Australia (Telstra CSC(? I think?). Please please if anyone knows of the location of any please link for me???
Ok so I've read through a lot of the forums here and I've figured that I had the Austrian stock Rom originally (55360TAJKK3). I have flashed the firmware to it and it's back to it's original state except one thing. There's no network. Telstra is listed under the APNs but I'm assuming it's Austrian telstra and it's because I don't have the right CSC file? Is this right? Is there a CSC file anywhere for ZSA for this? I've looked throug Doky's thread but can only find this rom. Can I flash just a CSC file to my phone without the modem and pda if I do happen to find it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51445018#post51445018