USB - Mouse not working anymore - Android Q&A, Help & Troubleshooting

Hello everyone,
I recently had a few problems with my phone: First my display broke - I used a usb mouse + adapter to controle it (it worked totally fine), my power button didn't survive the display-exchange - I was able to repair it.
Now the new display did break again, but this time not just the tocuh-control stopped working, so I did exchange it again to the old one.
But now, suddenly, my USB-Mouse-Setup won't work anymore. It may be, because I did reset the phone to factory settings.
Is there a way to get it working again?
I can fully control the phone via AirDroid.
A few details about the phone:
Device: Oppo Find7 EU
OS: ColorOS 2.1.5i (Android 5.0)
USB-Debugging enabled
Rooted (SuperSU) but stock recovery
Mouse-Setup:
Standard USB-Mouse + Adapter (goo.gl/Ndq8tF)
If you do need any more information, feel free to ask. I will do my best to provide it.
Thanks in advance for any help,
major_tom

Related

[Q] Galaxy 10.1 Table Screen Cracked - Need Help with USB or Bluetooth Mouse

Hello Everyone,
I need a little help, if possible.
I own a Galaxy 10.1 tablet. Recently my son dropped it and cracked the screen. I am not able to use the touch screen anymore.
The tablet is rooted, with current recovery and has a CM 10.1 JellyBean installed. I was in the impression that if I buy the samsung USB adapter then I can use the usb mouse but it seems like its not working.
I wiped the tablet and re-installed CM Nightly JB and its still not working.
Couple of questions:
1) Is there a way I can get the USB mouse working?
2) I also have a Bluetooth (BT) mouse that I can use but for that I need to have the Bluetooth option enabled and becuase the touch screen is not working that not happening.
3) Is it possible to request a backup from a co-owner with the bluetooth option enabled and then do a restore on my tablet? If yes, Can anyone volunteer to provide me a bluetooth enable backup?
4) Is there a way to enable bluetooth or mount USB mouse via zipfile through Recovery.
Thanks all and appreciate your help.
Found this link to enable bluetooth via adb (http://android.stackexchange.com/questions/21320/can-i-restart-the-bluetooth-from-terminal ) but it looks like it will pop up a confirmation...and if your touch screen isn't working you still may be out of luck. but it is worth a shot.

[Q] Problem with connecting android to pc.

Hello everyone. I have a problem with connecting my Samsung galaxy S3 (android 4.3) to any of my PCs. Before everything worked fine but then I upgraded to android 4.3 and connections started crashing. It still worked but connections were unstable. So I installed Samsung Kies 3 and from then on I haven't been able to connect my device to any PC. I tried everything I found on web. I have developer mode and usb debugging on. I know my cable is OK because other devices work just fine. Someone suggested going to usb settings but apparently there is no such think in android 4.3 settings, so I downloaded some apps to change my usb settings but they all require a rooted phone. I tried rooting my phone but even for that I need to connect it to a PC. I really need to connect my phone to PC to test apps(android emulator lags waaay too much). Does anyone know how to fix this please? Any suggestion is appreciated. Thanks.
Mustafa19 said:
Hello everyone. I have a problem with connecting my Samsung galaxy S3 (android 4.3) to any of my PCs. Before everything worked fine but then I upgraded to android 4.3 and connections started crashing. It still worked but connections were unstable. So I installed Samsung Kies 3 and from then on I haven't been able to connect my device to any PC. I tried everything I found on web. I have developer mode and usb debugging on. I know my cable is OK because other devices work just fine. Someone suggested going to usb settings but apparently there is no such think in android 4.3 settings, so I downloaded some apps to change my usb settings but they all require a rooted phone. I tried rooting my phone but even for that I need to connect it to a PC. I really need to connect my phone to PC to test apps(android emulator lags waaay too much). Does anyone know how to fix this please? Any suggestion is appreciated. Thanks.
Click to expand...
Click to collapse
Bring it to Samsung service center and smack them. (Samsung 4.3 updates suckz)
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.

[Q] Problems with Graphic Tablet on Android

Hi guys i have a one problem with device compatibility - when i try to connect Genius EasyPen i405x with Galaxy Tab 2 7.0. (with rooted stock firmware) i have trouble with recognition, because system can't correctly recognize that device - yeah android system says about successful usb connection, but when i tried to use stylus on graphic tablet i only have unmovable cursor on the screen, and touch of stylus recognises like a android "back" button
(Have any ideas? Maybe this cause with driver problem?)
P.S. Sorry for a bad english, because for me it is a foreign language :crying:
And please dont get mad at me for this stupid question - i only want to draw on my galaxy tab anytime and anywhere

USB Connection impossible.. how to flash now?

Hello people,
i got a small problem. I just bought a sm-g925F and be very happy with it so far. Well the problem is, that i can't connect to the phone via USB to flash another FW because 6.0 isnt aviable for switzerland (AUT) now. For those who think they maybe got a solution: impossible. I already tried everything in every forum. I tried different cables, different PCs, download mode, usb debugging, different drivers, manual set drivers, exit silent mode, wipe device, apply a new usb port on the device (im not that shure if they really did it).
Win 10 gave me a message, that its unable to get informations about the connected hardware. For me there are two solutions: 1. Hardware device of the device core PCB, 2. the Firmware is broken somehow.
ANYWAY i dont want a solution for that. Im just ask if its possible to flash another firmware for example via Wireless Lan oder an SD Card, connected to the S6 via USB adapter.
I am thankful for every reply
Kind regards
Same problem here, USB was working 100% then I got the 6.0.1 beta and now I can't get USB at all.. Are you on the beta?
Sent from my SM-G925F using XDA Free mobile app
Nope, i did a usual update to 5.1.1 when i got my phone.
if the device is still working...dial *#0808# and select MTP+ADB and try if u can flash the new FW you want to flash.
Mtp+adb was already selected
May i change these settings?
Get usb otg cable, and push firmware as adb or put zip rom on usb and browse the connected usb via otg in twrp
Sent from my LG-H815 using Tapatalk
I thoght on this, too... the Problem is that i only have stock recovery
Hey guys i just got my S6 back!
I gave it to a samsung partner after some phones with the samsung service. They wasnt able to fix this problem. So i decided to give it away to repair it. It took 6 days(!!) whats amazingly fast and they installed a new main pcb, usb slot and another thing (dont know the part name) and it works fine now!
Thanks for all your help.

vodafone vf-895n -> broken screen -> how to enable ADB/remote control/ssh

Hello All,
I broke screen on my vodafone smart prime 6 (vf-895n). Touch layer is broken and LCD too, there is big black blot covering 20% of display. New LCD is expensive and I planed to buy new smartphone soon, I wan't to use my old phone as LTE modem only in future. (like Huawei CarFi)
Current status:
- USB debugging disabled :crying:
- not rooted, stock recovery :crying:
- touch layer broken in middle, only upper half is working, I can enable/disable WiFi or BT, but I am not able to enter PIN, open menu, start apps, change settings, etc.
- linked to google account, I can install apps from google play
- I don't much care about data in phone, everything important is on sd card or synced on my google account.
Is there any way how to gain remote access to phone? like install some app from play store which starts automatically after phone boot up? or something with recovery mode?
Or only way is replace at least digitizer which is not so expensive?
Thanks in advance
You can try using OTG connected to a mouse. I don't have other solutions in mind
KMXSLR said:
You can try using OTG connected to a mouse. I don't have other solutions in mind
Click to expand...
Click to collapse
Unfortunatelly phone doesn't support OTG, even OTG cable + USB hub with external power + mouse is not working
Skopy123 said:
Unfortunatelly phone doesn't support OTG, even OTG cable + USB hub with external power + mouse is not working
Click to expand...
Click to collapse
Try running adb commands while your phone is in stock recovery, it's rarely working but it's a try.
Last solution could be calling Vodafone for help about that or go in a Vodafone shop
Hope it will help
KMXSLR said:
Try running adb commands while your phone is in stock recovery, it's rarely working but it's a try.
Last solution could be calling Vodafone for help about that or go in a Vodafone shop
Hope it will help
Click to expand...
Click to collapse
Thank you very much for help,
I tried to run stock recovery and select apply update from adb, then I can see phone in result of "adb devices" but opening shell, or reboot commands via adb is not allowed, it seems that in recovery mode only flashing new ROM is allowed.
From vodafone I didn't expect any reasonable help, and it was true, they only offer me repair phone for non-sense price (90$), even whole used phones in good condition are cheaper.
So I bought new digitezer from ebay for 10$ and I am waiting for it.
Ok, good luck!

Categories

Resources