Hi folks,
I have install cyanogenmod 13 nightly builds, and Cyanogenmod Recovery. Currently my usb is broken, i want to flash the Recovery by replacing with TRWP or CMW
Is there any help? I tried flashify , its not working .. I tried Rom manager , not working... i don't know whats the problem. My phone is fully rooted though.
thanks for any help
[email protected] said:
Hi folks,
I have install cyanogenmod 13 nightly builds, and Cyanogenmod Recovery. Currently my usb is broken, i want to flash the Recovery by replacing with TRWP or CMW
Is there any help? I tried flashify , its not working .. I tried Rom manager , not working... i don't know whats the problem. My phone is fully rooted though.
thanks for any help
Click to expand...
Click to collapse
did you try this guide?
https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
it doesn't require any PC...
just curious, if your USB is broken, how do you charge your phone??????!!! wirelessly?????? :laugh:
haha wirelessly , i don't mean this, i mean it does not recognised the usb. I'm getting error each time, may be the usb port is loose. I will try it for sure MigoMujahid, thanks for the help and i will let you know if it works
[email protected] said:
haha wirelessly , i don't mean this, i mean it does not recognised the usb. I'm getting error each time, may be the usb port is loose. I will try it for sure MigoMujahid, thanks for the help and i will let you know if it works
Click to expand...
Click to collapse
well, you could try another USB port in PC or another Cable, it's may not be your USB, could be another thing of what i mentioned above, or it could be the drivers are not installed correctly.
@MigoMujahid, i think i bricked the phone now and without odin, i am unable to flash with usb not being recognised.
[email protected] said:
@MigoMujahid, i think i bricked the phone now and without odin, i am unable to flash with usb not being recognised.
Click to expand...
Click to collapse
did you try another port or cable?
or even another PC?
it would sound insane, but a user here had your problem, but he fixed by using Odin3 in a Linux operating system!
MigoMujahid said:
did you try another port or cable?
or even another PC?
it would sound insane, but a user here had your problem, but he fixed by using Odin3 in a Linux operating system!
Click to expand...
Click to collapse
@MigoMujahid, yes , i had tried in other usb ports, even in other pc, laptops etc, it does not work. I think i will either change the usb port of the S2 or buy a new phone ...
Related
Hi guys,
need a hand here, yesterday I plugged my S2 to my PC but it wouldn't show up. I've done this many times before. I was getting the message saying 'usb device not recognized'. I then flashed the new ICS resurrection rom by moving it to my SD Card through an adapter. I thought maybe the usb problem would go away.
As my luck would have it the flash went badly it seems because i'm now getting the kernel panic message on my device. I can't get it to recovery mode but I can get it to download mode BUT Pc doesn't recognize the device still...
Could this maybe be a damaged port on my device?
Is it maybe a driver problem?
Any help would be much appreciated....
Anyone have any advice?
pdscoelho said:
Is it maybe a driver problem?
Click to expand...
Click to collapse
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
peachpuff said:
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
Click to expand...
Click to collapse
I plugged in a galaxy TAB and used KIES through my web browser to transfer items to the TAB. Does this interfere with the SGSII? I haven't used KIES with the SII
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
JJEgan said:
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
Click to expand...
Click to collapse
I can only get my phone into download mode, when I connect and open up odin it isn't picking up the device.....so how can I flash anything to it?
Hi
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
OP, try this.
Ekibyo22 said:
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
Click to expand...
Click to collapse
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
pdscoelho said:
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
Click to expand...
Click to collapse
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
ctomgee said:
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
Click to expand...
Click to collapse
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
pdscoelho said:
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
Click to expand...
Click to collapse
Download the apk to your computer, and email it to yourself? Or via wifi file copy?
EDIT: I'm a dork, right, your phone doesn't boot. Um... I'm not sure now... have to think about it.
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
pdscoelho said:
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
Click to expand...
Click to collapse
Good luck, dude.
I resolved the problem! Thanks for the input guys
Hi to all!
Since yesterday, my PC which is running W8 gave an error whenever i tried to connect my xperia mini to my PC. 'USB device not recognized'. I was running CM 10.1 and a new update was available so i tried to flash it. Flashed it successfully and then the network was gone so, what i did was flash back to CM 9.1. Here the problem occurred. My PC is not recognizing my phone. I tried flashing the kernel with flash tool and followed this :- http://forum.xda-developers.com/showthread.php?t=2095087 Still nothing. Connected it to another laptop running windows 8. Even that didn't work so i connected my phone to my dad's laptop running windows 7. I was somehow able to flash kernel at first but then the same error there too! Tried 3 different PC's and i'm not able to solve this issue! Please help!
as you have a custom kernel on device,try accessing CWM and installing the stock ROM,then install CM again..
btw did you check the CM10.1 page for any bugs..?
a|\|droid_user said:
as you have a kernel on device,access CWM and try installing the stock ROM,then install CWM again..
Click to expand...
Click to collapse
Tried 2 different ROM's on the same kernel. Nothing happens. I get the same error each time! Also now my ear-piece won't work too (In both the ROM's i flashed) :'(
I also noticed that using Win XP, i can connect MSC to my PC and copy/paste items. But as soon i go into fastboot mode, it gives me the error!
Edit: I have used CM 10.1 before with no bugs. This started happening only yesterday!
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Gamertroid said:
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Click to expand...
Click to collapse
I have everything installed! Right now i'm on XP. Even it doesn't recognize my phone in fastboot mode!
check device manager..
when you connect your xperia..what does it show ?
try updating the driver by manual selection...
if that doesnt work..
open flashtool..
check the logs when you connect your xperia..
-DELETE-
I somehow managed to connect it to flashhtool in flash mode! Now i'm flashing .42 ftf file to use my device somehow with 0 bugs/glitches. It is taking forever to do so! See the attachment!
Any other way to flash ftf file?
Thank you
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Is your computer detecting any other xperia device,or an iphone...?
check if your micro usb port is damaged...
Sent from my WT19i using xda app-developers app
ishanbhatnagr96 said:
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Click to expand...
Click to collapse
Goto flashtool/drivers/ and install drivers and check...
a|\|droid_user said:
Is your computer detecting any other xperia device,or an iphone...?
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
It is detecting my pendrive, my hard-drive and my nexus!
Edit: Tested on 3 laptops each running:- Win8 and other two Win7. Also, tested on 1 PC (dual-booted with XP and Win8) Same result in all of them.
Is SEUS detecting the phone?
Try changing connection modes on the phone...
if not..flash stock kernel
get me a screenshot of flashtool logs for check drivers option..
its here help->check drivers..
Solved (I guess)
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
Maybe its the prob with ports, others reported it not working with usb3.
Regards
-N
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
well,why dont try reinstalling your usb controller drivers to see if the front port is workin?...
otherwise if you are done with this problem...change the topic to RESOLVED..
Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh:
Hello pretty nooby ;however, im stuck i recently wanted to try an older cm10.2 rom from the unstable newer ones and decided to go back to cm11 and i decided to reformat my data leaving me emptiness. I am now stuck with not being able to coneect to a device or external storage i can charge though. so please help any solution? im pretty sure i didnt enable mtp and put on debugging... Thx in advance
Edit: this phone doesnt support otg how may i cant connect adb it says waiting for device when i try to flash twrp
fizzlemcdizzle said:
Hello pretty nooby ;however, im stuck i recently wanted to try an older cm10.2 rom from the unstable newer ones and decided to go back to cm11 and i decided to reformat my data leaving me emptiness. I am now stuck with not being able to coneect to a device or external storage i can charge though. so please help any solution? im pretty sure i didnt enable mtp and put on debugging... Thx in advance
Click to expand...
Click to collapse
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
luqman98 said:
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
Click to expand...
Click to collapse
i enabled usb debugging
original cable
adb fast boot i tried to install...
luqman98 said:
1. Did you have ADB and fastboot drivers installed?
2. Did you enable USB Debugging?
3. Use USB cable that came with your phone.
Click to expand...
Click to collapse
im now installing the 4.3 drivers
this should fix it
fizzlemcdizzle said:
im now installing the 4.3 drivers
this should fix it
Click to expand...
Click to collapse
Did nada my device cant be recognized i get it recognized and a hazardous driver sign. I cant boot into os i reformatted data now im stuck in cwm and bootloader pretty unique also because this phone doenst allow otg helppp!!!
whilst trying to update the "Android" drivers it says the third-party inf does not contain digital signature verification
from this thread
http://forum.xda-developers.com/showthread.php?t=1583801
i also once im in cwm get a new driver name for my device ls970 my phone name
fizzlemcdizzle said:
whilst trying to update the "Android" drivers it says the third-party inf does not contain digital signature verification
from this thread
http://forum.xda-developers.com/showthread.php?t=1583801
i also once im in cwm get a new driver name for my device ls970 my phone name
Click to expand...
Click to collapse
Search for your LG's drivers at their website or around the net and install.
Sent from my GT-S5300 using Tapatalk 2
luqman98 said:
Search for your LG's drivers at their website or around the net and install.
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
i have now do i have to locate and update with this driver?
i have installed the drivers like 5 time and the wizard said it was installed succesfully now what do i do?
am i missing a step?
fizzlemcdizzle said:
i have installed the drivers like 5 time and the wizard said it was installed succesfully now what do i do?
am i missing a step?
Click to expand...
Click to collapse
Flash stock ROM here: http://www.mylgphones.com/sprint-lg-optimus-g-ls970-software-update-ls970zvc.html
Or I'm wrong?
I don't know why my device won't be recognized I heard it might be a kernal from another thread with a similar situation.
fizzlemcdizzle said:
I don't know why my device won't be recognized I heard it might be a kernal from another thread with a similar situation.
Click to expand...
Click to collapse
Man you really don't have a clue do you!!
Why in hell would you need OTG to flash a rom? Do you even know what OTG is?
Stop ignoring people that give you the solution too. It's really bad manners.
So download the stock rom and flash it.
You should spend a day reading up first before you damage the phone permanently.
Sorry if not being clear I have been listening my phone has a hardware issue and I'm not to much of a noob have tried each comment. I'm not to nooby but I have downloaded the drivers my device is not being recognized correctly I have a hazardous icon in device manager on my android phone lg ls970. My phone does not support otg I'm trying to install .zips through a flash drive and otg cable. I'm sorry if waisting peoples time with my apparently nooby question. Please c correct me if I'm wrong thanks for the support.
Let me be clearer I'm sorry for not spelling it out well enough. I have installed drivers many times I have installed the driver however my phone is not being recognized correctly I have uninstalled and tried again. Otg which I looked it up pretty handy in these situations, doesn't work for this phone (due to outputting)I had a cm10.2 kernal which may have had something do do with this. I have come to believe that its a hardware problem with the female port I will try again on another computer tomorrow and see.
What I want to know is why it still recognizes something and if its fixable?
Thx
I have fixed thanks luqman98 it was a problem with windows not allowing me to install drivers due to 8.1 update
http://www.winbeta.org/news/windows...ly-watermark-finally-removed-hotfix-kb2902864
thx
Hey,
I have been using CM12.1 Nightlies since January, and I've been experiencing bugs related to USB recognition. Yesterday I've updated to CM13 thinking that it would solve this issue, but it haven't.
What happens is that I can't use USB storage/MTP/Odin/direct plug adb because my phone doesn't get recognized by the OS. I think that the USB port is not damaged because I can charge it when connected to my PC . I used to have CM11 and it worked fine, I think that maybe it is something related to the build itself..?
I have already tried a lot of methods, USB debug on/off, different cords, OSes (Tried on Windows, Mac, Linux), multiple adb/samsung drivers, apps.. nothing has worked so far.
I can only access the internal data using an external SD card or through network adb.
I think that the USB module was overwritten, because it looks undentified in every device that I've tested.
Has anyone experienced something like that? any tips, tests, or patches that I've missed?
Thanks.
Did you install Google USB Driver? I had to install this one to get my device on CM 13 recognized. It should work "out-of-the-box" on Linux distros though if you've got libmtp installed (for MTP browsing).
matee89 said:
Did you install Google USB Driver? I had to install this one to get my device on CM 13 recognized. It should work "out-of-the-box" on Linux distros though if you've got libmtp installed (for MTP browsing).
Click to expand...
Click to collapse
The device doesn't get recognized by Windows, it doesn't even show up on the connected devices list. The funny thing is that the phone actually charges, so it is not a dead usb connection...
I think that I'll have to replace the USB PCB...
Hello,
i tried to flash twrp to my i9100.
I had cm12.1 with cyanogen recovery and tried to apply update for :
"recovery-Lanchon-IsoRec-TWRP-2.8.7.0-20160113-i9100-(by-arnab)"
and
"kernel-Lanchon-TRIM-IsoRec-20160207-cm-13.0-i9100"
but know my phone is not starting anymore.
I already know that i used 13 kernel for 12.1 system and that was wrong.
I can access ODIN Mode but my pc (win10) and Odin v.3.10 don´t recognize my S2.
Can you tell me how to solve my problem?
i9100cm said:
Hello,
I can access ODIN Mode but my pc (win10) and Odin v.3.10 don´t recognize my S2.
Can you tell me how to solve my problem?
Click to expand...
Click to collapse
Try reinstalling Samsung USB drivers. If that didn't work then try it on another computer.
Now my S2 is getting recognized again.
But i geht the error code 43.
The device description is failured.
Kevin3014 said:
Try reinstalling Samsung USB drivers. If that didn't work then try it on another computer.
Click to expand...
Click to collapse
Kevin, how to flash lanchon kernel without recovery?
because my recovery is cyanogenmod recovery cm13 it cannot update from sdcard..
Abdullah Yusoff said:
Kevin, how to flash lanchon kernel without recovery?
because my recovery is cyanogenmod recovery cm13 it cannot update from sdcard..
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...es/guide-want-to-update-to-cm13-read-t3313978
Read this thread, it has the answer to your question.
Hey, OP here.
So just updating my status, I bought and replaced the Micro-USB connector and everything is working now, the device is recognized by the OS and I'm able to use use Odin/ADB normally.
If anyone out there is having the same issue, I recommend buying a new Micro-USB PCB. This phone is from 2011, batteries and connectors might stop working...
Thanks everyone for helping me out!
Thyrr said:
Hey,
I have been using CM12.1 Nightlies since January, and I've been experiencing bugs related to USB recognition. Yesterday I've updated to CM13 thinking that it would solve this issue, but it haven't.
What happens is that I can't use USB storage/MTP/Odin/direct plug adb because my phone doesn't get recognized by the OS. I think that the USB port is not damaged because I can charge it when connected to my PC . I used to have CM11 and it worked fine, I think that maybe it is something related to the build itself..?
I have already tried a lot of methods, USB debug on/off, different cords, OSes (Tried on Windows, Mac, Linux), multiple adb/samsung drivers, apps.. nothing has worked so far.
I can only access the internal data using an external SD card or through network adb.
I think that the USB module was overwritten, because it looks undentified in every device that I've tested.
Has anyone experienced something like that? any tips, tests, or patches that I've missed?
Thanks.
Click to expand...
Click to collapse
hey..if no method works for you i have simple way..to turn on usb debugging and for odin (means from this way odin will recognose your mobile)...just flash the new simple custom rom with lower android versions and then turn on usb debuging mode....thats all ...i also strucked in this problem but i did this and all works fine...sry for my bad english and typing