i now have a new problem ! ive ran companion softare repair and get this message
SOFTWARE REPAIR FAILED
An error occured while repairing your device
Please try gain if the problm persists, please contact Sony support
UEUpdateFailed
UE_2005
1.6.5.0/windows 7 homesp1 64bit / win 32 / US
Relock your device ?
max26292 said:
Relock your device ?
Click to expand...
Click to collapse
Sorted now but lost drm keys and can't find the fix for my kernel version
if you relock, you can repair by sony companion. Anyway, we have some rom on develop 4rom with DRM fix so i think you can try it ^^ have fun
max26292 said:
if you relock, you can repair by sony companion. Anyway, we have some rom on develop 4rom with DRM fix so i think you can try it ^^ have fun
Click to expand...
Click to collapse
Tried companion and it soft bricks every time need to re do it about 5 times before it boots again. Could you point me in the right direction for the roms? Tried one but it doesn't supprt my firmware
you must lock your bootloader before use companion. or use flashtool to flash other firmware
i have same problem, if you have found the solution?
this happened to me and this worked for me:
tried checking if cable was lose if so fix it
try turning the phone on
and it will say phone update failed try connecting to pc.....
after that turn it of and retry the process ..
i hope this works for you also
Sachin Das said:
this happened to me and this worked for me:
tried checking if cable was lose if so fix it
try turning the phone on
and it will say phone update failed try connecting to pc.....
after that turn it of and retry the process ..
i hope this works for you also
Click to expand...
Click to collapse
Thanks man! Your solution did the trick. Didn't think of the cable connection as the cause for the error. Changed cable and connected it to the USB 3.0 on the computer and the update went fast like a charm You saved my day!
Related
hello everyone,
i started rooting my X10,
i followed the instructions in step one, started my x10 in flashmood, pressed enter and the screen began to show messages then when it finished i unpluged my mobile from usb cable and tried to start it but it did not start . i removed the battery , put it again and tried to start it but again it did not start
did everything but the mobile is not responding to anything
even i tried to install a new software but the pc does not identify the mobile anymore, please helpppppppppppppp
is my mobile hardware got burned or is there anything i can do, please
Normally the phone does not get burned! (i don't know anyone who bricked his phone)!
So please try to take out the battery for a least one minute and try to flash via SEUS on another USB-Port!
Regards
Bin4ry
i will try this solution,
thx Bin
Bin4ry said:
Normally the phone does not get burned! (i don't know anyone who bricked his phone)!
So please try to take out the battery for a least one minute and try to flash via SEUS on another USB-Port!
Regards
Bin4ry
Click to expand...
Click to collapse
by this , do u mean Sony Ericsson PC companion ? cuz the main problem is still the same, the pc does not identify that there is a mobile connected via USB port so how can i flash it?
firstly you dont mean rooting do you - rooting doesnt require flashing
you're installing bin4ry's 2.1 rom ?
you will need flash mode to do this so im sure you know how to do it.
if you still cant get the x10 to boot back up, make sure it's got plenty of charge then use SEUS to Repair it - you should still be able to get into flash mode to do this
all of this is not working, i think i might got a virus while using seus or the hardware got a problem
I have updated my x10 mini to nAa-11 and unlocked it and is running on cm7, but the problem is that the batery sucks, i take a photo the phone switches off, so i wanna restore my phone back to its default firmware and stock 2.1... soo please help me on how to do this..!!!
to back to stock, just repair with seus or PcCompanion.
ArtBcn said:
to back to stock, just repair with seus or PcCompanion.
Click to expand...
Click to collapse
i doesnt detect my phone at all..!!!!
try to plug in flash mode (with companion started, turn off the device, press back button and connect USB)
...And if you tried yet, try pressing the three buttons...
ArtBcn said:
try to plug in flash mode (with companion started, turn off the device, press back button and connect USB)
...And if you tried yet, try pressing the three buttons...
Click to expand...
Click to collapse
i did it and i press repair ,but after downloading it said some error..!!!
sanjay_bandaru said:
i did it and i press repair ,but after downloading it said some error..!!!
Click to expand...
Click to collapse
...ups!!! Which kind of error ??, please can you write what error is saying?
ArtBcn said:
...ups!!! Which kind of error ??, please can you write what error is saying?
Click to expand...
Click to collapse
it says cannot start up the update service
...but this seems like pc error with companion
Companion detect correctly your device or not? The installation beggin correctly and stopped?
ArtBcn said:
...but this seems like pc error with companion
Companion detect correctly your device or not? The installation beggin correctly and stopped?
Click to expand...
Click to collapse
this is the problem with the pc companion ,i clicked repair and it said downloading some files and then an error occurs and when i tried on the seus it say it already has the latest software..!!!
sanjay_bandaru said:
this is the problem with the pc companion ,i clicked repair and it said downloading some files and then an error occurs and when i tried on the seus it say it already has the latest software..!!!
Click to expand...
Click to collapse
When seus says you have the latest software there is a bit that says something like "if you're having problems with your device click repair" I restored mine like this last week (two days and I was back on the latest minicm)
I know people say it all the time but you could calibrate your battery
Fully charge
Wipe battery the stats
And run a few full cycle charges.
Worked a charm last time my battery went ****ty!
Download Sony Update Service : Download Update Service
Then,open Sony Update Service.Select your phone and click next and next until it tells you to turn off the phone,wait 15 seconds and then plug it in while pressing back button.A green LED will flash from the phone.Just wait until the program tells you to disconnect the phone and power it on.If this is the wrong Update Service,try this link :
Old Sony Ericsson Update Service
themiltos21 said:
download sony update service : download update service
then,open sony update service.select your phone and click next and next until it tells you to turn off the phone,wait 15 seconds and then plug it in while pressing back button.a green led will flash from the phone.just wait until the program tells you to disconnect the phone and power it on.if this is the wrong update service,try this link :
old sony ericsson update service
Click to expand...
Click to collapse
guys nothing works can u tell me d procedure by usinf flashtool
SEUS and Pc companion has being giving some server errors...
And by the install any fully working rom(minicm7pro by paul) which works on stock kernel...
Then flash stock kernel after installing rom.
I think it is because the custom kernel due to which SEUS doesnt detect phone
Yashu1019 said:
SEUS and Pc companion has being giving some server errors...
And by the install any fully working rom(minicm7pro by paul) which works on stock kernel...
Then flash stock kernel after installing rom.
I think it is because the custom kernel due to which SEUS doesnt detect phone
Click to expand...
Click to collapse
thank you all my phone is restored
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help
Okay, I installed CM9 ShockGenMOD on my Xperia U and it worked flawlessly. Later I saw this thread in APPS section "http://forum.xda-developers.com/showthread.php?t=2340073" and installed it using CWM on my phone, my bad it said JB only
Now my phone isn't proceeding ahead ShockGen logo after the installation. Xperia U did not have removable SD card so I can't even add NEW rom from PC to start from scratch.
What do I do? How do I fix it? Please help!!!
Regards
KING STING3R said:
Okay, I installed CM9 ShockGenMOD on my Xperia U and it worked flawlessly. Later I saw this thread in APPS section "http://forum.xda-developers.com/showthread.php?t=2340073" and installed it using CWM on my phone, my bad it said JB only
Now my phone isn't proceeding ahead ShockGen logo after the installation. Xperia U did not have removable SD card so I can't even add NEW rom from PC to start from scratch.
What do I do? How do I fix it? Please help!!!
Regards
Click to expand...
Click to collapse
use Sony PC companion to repair it..and then install CM9
yeah88 said:
use Sony PC companion to repair it..and then install CM9
Click to expand...
Click to collapse
How am I suppose to connect my phone to PC companion, when I can't start my phone.
Please can you reply in detail?
Anyone??? PLEASE @AD9295 you might help!!
KING STING3R said:
Anyone??? PLEASE @AD9295 you might help!!
Click to expand...
Click to collapse
Have you used PC Comapanion before?
If you have you can repair the phone without connecting the phone.
Click start under support zone, click start under phone tablet software update, click repair in the window that says can't find phone / tablet,, PCC wil start downloading files and will ask you to connect in flash mode.
The phone must be turned off before connectinmg in flash mode.
ChikeD said:
Have you used PC Comapanion before?
If you have you can repair the phone without connecting the phone.
Click start under support zone, click start under phone tablet software update, click repair in the window that says can't find phone / tablet,, PCC wil start downloading files and will ask you to connect in flash mode.
The phone must be turned off before connectinmg in flash mode.
Click to expand...
Click to collapse
Thanks for replying Lemme try and get back to you!
ChikeD said:
Have you used PC Comapanion before?
If you have you can repair the phone without connecting the phone.
Click start under support zone, click start under phone tablet software update, click repair in the window that says can't find phone / tablet,, PCC wil start downloading files and will ask you to connect in flash mode.
The phone must be turned off before connectinmg in flash mode.
Click to expand...
Click to collapse
Okay I tried as you said! But no when I connect it to PC PCC says no software available for your phone! WHAT TO DO? anyother suggestions PLEASE HELP
KING STING3R said:
Okay I tried as you said! But no when I connect it to PC PCC says no software available for your phone! WHAT TO DO? anyother suggestions PLEASE HELP
Click to expand...
Click to collapse
That is after you choose repair?
You will need to downalod and install flashtool install the drivers that come with it and find and download the right formware for your phone.
Download stock ftf and use flashtool to flash ftf look on here for how to use flash tool . Will solve all your problems
Sent from my Xperia U using xda app-developers app
Thank you very much guys! Flash tool worked THANKS
sorry for my late reply.
I will suggest that you should always have a backup in case of incidents like these.. this is a development site.
Accidents happen while developing.
Flashtool is always the best way to recover your phone and always have nandroid backup when you install a new mod.
Because when you flash to stock you lose your data but restoring nandroid backup using custom kernel solves the problem!
Hope i helped.
Thanks everyone my prob is solved! I did flashed it
Sent from my Xperia U using Tapatalk 4
Phone keeps rebooting while it's on charger , and doesn't turn on if i remove it from it
as in this video watch?v=k3Y93FjEqdw
it was off for long time and i was trying to use it again
flash an ftf using flashtool it will solve the problem
Hariskh said:
flash an ftf using flashtool it will solve the problem
Click to expand...
Click to collapse
When I was trying to do it , it totally doesn't allow the tool to connect while battery is in the phone , I opened the phone to disconnect it and tool worked
but still no luck ,exactly same issue
You should try with the older version of flashtool as well(worked with an SP, same issue)
If that doesn't help, your motherboard might gave up
GMMAnonymus said:
You should try with the older version of flashtool as well(worked with an SP, same issue)
If that doesn't help, your motherboard might gave up
Click to expand...
Click to collapse
Sounds like it's the Motherboard , got bored of waiting and died
someone advised me to check with a charged battery before i give up , will try and update