Lenovo vibe x2 total brick please help - Android Q&A, Help & Troubleshooting

Hi everybody.
I Flash my Phone but I have accident And disconect Phone from pc.
Now phone is totally dead.
If I connect to pc I only hear sound plug and unplug sound. Connect and disconect.
Power button dont working even If press power+up or down button. Nothing.
I tried many tutorial on web but dont succes. All Fail.
I tried unbrick via sp flash tool but error message:
BROM ERROR :S_BROM_CMC_STARTCMD_FAIL (2005)
Somebody Any idea?

Ryohazukycz said:
Hi everybody.
I Flash my Phone but I have accident And disconect Phone from pc.
Now phone is totally dead.
If I connect to pc I only hear sound plug and unplug sound. Connect and disconect.
Power button dont working even If press power+up or down button. Nothing.
I tried many tutorial on web but dont succes. All Fail.
I tried unbrick via sp flash tool but error message:
BROM ERROR :S_BROM_CMC_STARTCMD_FAIL (2005)
Somebody Any idea?
Click to expand...
Click to collapse
Bro i think there is no solution now
Just visit the samsung or any other vendors for repairing and check if it get repairs

Related

[HELP][ST15i Xperia Mini] bricked while using s1tool?

Hopefully u can help me, I think I bricked my new mini just 1 day after i received it...
I tried unlocking bootloader without loosing DRM using "s1tool" as mentioned in the thread in the development-section.
I never connected the phone to my PC before, maybe thats the Problem?
i downloaded s1tool, searched for the "testpoint" and did everything mentioned in the tutorial for unlocking, but after connecting phone i got the message "can't get S1 command header LOADER NOT RESPONDING".
I tried several times, running program as Admin, testing different usb-ports and two different cables, nothing worked.
Now my phone doesn't even turn on, nothing happens. It also is not recogniced by SEUS It's absolutely dead, no vibration, no light, nothing.
s1tool still shows the error mentioned above. if i try to connect phone to pc it is recogniced as "ZEUS flash device" doesn't matter if i press the volume down key or not, doesn't matter if i attach GROUND to test point or not, everytime i connect it it is "ZEUS flash Device"
I can't even use flashtool coz i can't get into flash mode.
What can i do now? please help me!!!!
thanks in advance
nobody any idea how to fix? I took GND from my PC, not from the mini itself, maybe that caused the problem?

[Q] How to flash with SP tool on MKT6577

Hi
Sorry to bother, but i just got a new Star B92M but im having a rough time trying to update it and flash it with SP Flash Tool
So far, i have tried this
To flash with the SP_Flash_Tool_v3.1224.01 (i get BROM 3013 error)
To flash with the SP_Flash_Tool_v3.1224.0.sn85 ( i get the 8038 error)
I have tried to run each of them as administrator
I have tried to click on Firmware-> Upgrade as someone suggested on a post
I have installed the preloader drivers
I have tried by taking our the battery and plugging in then put the battery on
But i havent been able to flash it. The phone is not bricked, it runs as nothing has happened, i do think although, that recovery is messed after so many tries since there is the red triangle when i try it.
I dont know if it is normal, but everytime i plug the phone when its off for flashing, is like it gets connected by usb for 2 seconds then disconnected, but its weird because when the phone is on, the usb works like charms, no problems on computer ports either or the usb cable, it just happens when i connect it when the phone is off (preloader i guess), yet i have installed the proper drivers read in many tutorials
Is there any other way to flash it? or any solution to this problem? Sorry for the bad english
Thanks in advance.

help on lenovo a7000 hard brick

my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Maervince015 said:
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Click to expand...
Click to collapse
Hi!
I had the same issue 2 day before!
To fix it I was unable with windows,so I downloaded a spflashtool for linux. I started with sudo (root access) and made the same method with the windows version.Its worked for me! But wait one or two day,maybe somebody will know a solution with windows.
My Lenovo A7000 Does not turn on
While installing the official update marshmallow device switched of and then it does not turn on. If i put in charge then after sometime lenovo screen appears and the it shuts down again,. Cannot go to recovery mode also. The lenovo screen shows TOOL Dl image fail in the left bottom side.
How can i solve this problem Please someone help me:crying::crying::crying:

huawei y550 fastboot stuck

I have Huawei y550. When i turn on my device i get message:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite.
PHONE LOCKED.
When i connect phone with computer, hisuite send me a message " not connected"
I already tried to hold power button for 10 sec, but nothing.
my phone also don't want to boot in recovery mode.
Any help? thanks.
sorry for bad english..
aldeman999 said:
I have Huawei y550. When i turn on my device i get message:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite.
PHONE LOCKED.
When i connect phone with computer, hisuite send me a message " not connected"
I already tried to hold power button for 10 sec, but nothing.
my phone also don't want to boot in recovery mode.
Any help? thanks.
sorry for bad english..
Click to expand...
Click to collapse
It's crazy I tried to turn the the phone on after a year to give it to my girlfriend to use and this is exactly what is happening to me right now. What a retarded thing to happen. There is no solution I guess.

Bluboo s1 SP flash help pretty please

Hello.
Everything has gone terribly wrong for my phone and I desperately need your help.
I downloaded what was stated on needrom.com I made sure MTK vcom was installed properly and had the correct rom from needrom.com but I still got Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP flash when using MTK_AllInOne_da.bin.
I then tried DA_PL.bin and got another error. I tried to uncheck preloader and run Download through SP flash with DA_PL.bin which worked just fine. However now I'm stuck at the Bluboo logo screen and phone does not load into android.
I still get Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP Flash if I use MTK_AllInOne_da.bin but if I use DA_PL.bin now I get this error:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Please help me, my phone is bricked until one of you help me. I'd be forever grateful!
Tomaskaos said:
Hello.
Everything has gone terribly wrong for my phone and I desperately need your help.
I downloaded what was stated on needrom.com I made sure MTK vcom was installed properly and had the correct rom from needrom.com but I still got Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP flash when using MTK_AllInOne_da.bin.
I then tried DA_PL.bin and got another error. I tried to uncheck preloader and run Download through SP flash with DA_PL.bin which worked just fine. However now I'm stuck at the Bluboo logo screen and phone does not load into android.
I still get Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP Flash if I use MTK_AllInOne_da.bin but if I use DA_PL.bin now I get this error:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Please help me, my phone is bricked until one of you help me. I'd be forever grateful!
Click to expand...
Click to collapse
Don`t worry about that, first this is the link of the last update https://www.google.com/url?q=https:...ds-cse&usg=AFQjCNFJKeEcDClPU2MnxLJefaQ19GmQpQ
for more success put your folder of SPFlash Tool near to folder of your unpacked rom (for short transmission of data) and Bluboo S1 has a few different way to enter to other mtk cause battery it`s not removable like other just disconnect it and connect again; in this case connect cable usb to your device, prepare all the files in SPFlashTool and click download and now while pressing both volume + and - connect cord to pc till SPFlashTool begin to recognize files (red letters) and release now, SPFlashTool continues process till 100% in yellow progressing line
SubwayChamp said:
Don`t worry about that, first this is the link of the last update https://www.google.com/url?q=https:...ds-cse&usg=AFQjCNFJKeEcDClPU2MnxLJefaQ19GmQpQ
for more success put your folder of SPFlash Tool near to folder of your unpacked rom (for short transmission of data) and Bluboo S1 has a few different way to enter to other mtk cause battery it`s not removable like other just disconnect it and connect again; in this case connect cable usb to your device, prepare all the files in SPFlashTool and click download and now while pressing both volume + and - connect cord to pc till SPFlashTool begin to recognize files (red letters) and release now, SPFlashTool continues process till 100% in yellow progressing line
Click to expand...
Click to collapse
Thanks!!! It works!!!!
Just be very careful. The USB C connector port in the phone is very loose... so make sure you can hold the cable tight other wiser it will lose the connection and brick your phone. For me, I had to remove the Plastic cover to be able to hold the power cable tight!
Hi, could you help me please? I did your steps, but it is not working. Sp flash does all its job, shows the green sign, but the phone stills dead. What I noticed the usb connects with the phone, then it disconnects. I tried to install the drivers as the tutorials say like deactivating the driver signature enforcement, but nothig happens well.

Categories

Resources