I have Huawei y550. When i turn on my device i get message:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite.
PHONE LOCKED.
When i connect phone with computer, hisuite send me a message " not connected"
I already tried to hold power button for 10 sec, but nothing.
my phone also don't want to boot in recovery mode.
Any help? thanks.
sorry for bad english..
aldeman999 said:
I have Huawei y550. When i turn on my device i get message:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite.
PHONE LOCKED.
When i connect phone with computer, hisuite send me a message " not connected"
I already tried to hold power button for 10 sec, but nothing.
my phone also don't want to boot in recovery mode.
Any help? thanks.
sorry for bad english..
Click to expand...
Click to collapse
It's crazy I tried to turn the the phone on after a year to give it to my girlfriend to use and this is exactly what is happening to me right now. What a retarded thing to happen. There is no solution I guess.
Related
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.
Please Help me if somebody know to Fix, help me guys.
Regards,
Kevin
kevin Hansjaya said:
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.
Please Help me if somebody know to Fix, help me guys.
Regards,
Kevin
Click to expand...
Click to collapse
How have you tried to enter flashmode and fastboot?
blueether said:
How have you tried to enter flashmode and fastboot?
Click to expand...
Click to collapse
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
kevin Hansjaya said:
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
Click to expand...
Click to collapse
I think he's asking you what steps you took to enter flashmode and fastboot.
kevin Hansjaya said:
I cant enter flashbmode and fastboot right now, i'm tried several times it wont connect, always said usb debuging OFF.
Click to expand...
Click to collapse
what i do is open the flashtool and use old rom , after flashtool ready i try connect my phone to PC , i hold volume up but always says usb debuging OFF.
Can you help me?
try to boot up the phone and hold volume up at the same time with usb plugged in, hopefully a blue led shows.
I'm stuck in a boot loop it will go to the home screen for a few seconds time seems to vary and then it just reboots I have developer options I have everything checked and selected that should help me connect to the ADB bridge but nothing seems to work I have the unbrick tool and it just will not connect to my phone when I go into DFU mode its just a black screen with a red light it does not connect to my PC when I go into ftm mode same thing it will not connect and I cannot get into recovery this happened when I flashed the Phils custom recovery with flashify in the methods that everyone said to work from this form as soon as the recovery was installed the phone shut down and has rebooted ever since I'm freaking out its not my phone please someone tell me what to do
And my post gets pushed to the back really need an answer on it if someone could take another look at this I need to connect to my adb I have ran the unbrick tool and still no devices are found or connected I have tried dfu mode nothing ftm mode nothing I have tried connecting during the 30 seconds of homescreem time I get yet once again nothing I have developers options on with USB debugging checked
TrueHAVOC said:
And my post gets pushed to the back really need an answer on it if someone could take another look at this I need to connect to my adb I have ran the unbrick tool and still no devices are found or connected I have tried dfu mode nothing ftm mode nothing I have tried connecting during the 30 seconds of homescreem time I get yet once again nothing I have developers options on with USB debugging checked
Click to expand...
Click to collapse
search the unbrick tool for the boost max. id post the link but i dont have it. its works!
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Emik3 said:
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Click to expand...
Click to collapse
When you do the volume up thing, in fastboot, do you see your device?
RAZERZDAHACKER said:
When you do the volume up thing, in fastboot, do you see your device?
Click to expand...
Click to collapse
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Emik3 said:
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Click to expand...
Click to collapse
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
RAZERZDAHACKER said:
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
Click to expand...
Click to collapse
Dam, i cant add picture.
When i try use this command after installing adb i see in cmd waiting on any device and when i connect phone nothig happend, still waiting.
I will try on another computer. I have computer with windows 10, in cmd i have waiting for device after write "fasttboot reboot-bootloader" command but phone is seen like communication port (com 1). Anyway i have instaled drivers for this phone (for normally working, and they are not drivers for this phone on windows 10)
Before i have pick in SPflash tool:
Format--->auto format flash---->format whole flash
so i think bootloader is formated and he need recover or reinstal
On computer with windows 7 is this same but in device menager he see phone named "MTK USB Port" in cmd after use reboot bootloader command cmd all time waiting for device.
I have installed MediaTek PreLoader USB VCOM Port but device dont use this drivers, when i connect the device use MTK USB Port or is added like new port.
Yup, but i dont want firmware update but i need firmware repair cause i get phone with bugged firmware and factory default settings not help.
Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html
Hi everybody.
I Flash my Phone but I have accident And disconect Phone from pc.
Now phone is totally dead.
If I connect to pc I only hear sound plug and unplug sound. Connect and disconect.
Power button dont working even If press power+up or down button. Nothing.
I tried many tutorial on web but dont succes. All Fail.
I tried unbrick via sp flash tool but error message:
BROM ERROR :S_BROM_CMC_STARTCMD_FAIL (2005)
Somebody Any idea?
Ryohazukycz said:
Hi everybody.
I Flash my Phone but I have accident And disconect Phone from pc.
Now phone is totally dead.
If I connect to pc I only hear sound plug and unplug sound. Connect and disconect.
Power button dont working even If press power+up or down button. Nothing.
I tried many tutorial on web but dont succes. All Fail.
I tried unbrick via sp flash tool but error message:
BROM ERROR :S_BROM_CMC_STARTCMD_FAIL (2005)
Somebody Any idea?
Click to expand...
Click to collapse
Bro i think there is no solution now
Just visit the samsung or any other vendors for repairing and check if it get repairs
I want to root my phone ( Huawei Y6 Pro ), but I am stuck at, or atleast can't enter bootloader mode. After I turn off my phone I press the Vol Down button and then connect the usb cable to my PC and then some menu shows up completely in chinese and all it does is just inform me with the specs of the phone. A few months ago I had no problem entering bootloader mode, but now I can not.
Shimun said:
I want to root my phone ( Huawei Y6 Pro ), but I am stuck at, or atleast can't enter bootloader mode. After I turn off my phone I press the Vol Down button and then connect the usb cable to my PC and then some menu shows up completely in chinese and all it does is just inform me with the specs of the phone. A few months ago I had no problem entering bootloader mode, but now I can not.
Click to expand...
Click to collapse
You probably mean fastboot mode. You may enable USB debugging and type this in minimal ADB and fastboot:
adb reboot bootloader
Or you could try to press volume down and power for about 5 seconds and then you should connect the data cable.