I want to root my phone ( Huawei Y6 Pro ), but I am stuck at, or atleast can't enter bootloader mode. After I turn off my phone I press the Vol Down button and then connect the usb cable to my PC and then some menu shows up completely in chinese and all it does is just inform me with the specs of the phone. A few months ago I had no problem entering bootloader mode, but now I can not.
Shimun said:
I want to root my phone ( Huawei Y6 Pro ), but I am stuck at, or atleast can't enter bootloader mode. After I turn off my phone I press the Vol Down button and then connect the usb cable to my PC and then some menu shows up completely in chinese and all it does is just inform me with the specs of the phone. A few months ago I had no problem entering bootloader mode, but now I can not.
Click to expand...
Click to collapse
You probably mean fastboot mode. You may enable USB debugging and type this in minimal ADB and fastboot:
adb reboot bootloader
Or you could try to press volume down and power for about 5 seconds and then you should connect the data cable.
Related
hi all,
i just want to see which bootloader i have on my 710, but combination VOL+ POWER then plug in USB doesn't work,
even tryed VOL+ VOL - / VOL+ VOL - POWER, i have the short vibration but as soon as i plug in computer, windows phone load.
i am with Win7 and my phone has been updated recently via Zune.
any advice ?
bootloader
what are you trying to achieve here are you trying to check which bootloader you have or try to flash a custom rom or even sim unlock the device
to get the phone into flash mode its vol + and then power short vibration then plug usb lead in the computer should then detect it. all fails get nokia care suite flash the old firmware that has the unlocked bootloader, you could also plug your phone in as normal then load nss and choose the osbl option then click the arrow that will force the phone into flash mode
rob :good:
thx for the info, i'm trying first to check which boot-loader i have, but i didn't install nokia care suite yet. that's probably why the computer doesn't find the drivers and the phone boot normally in windowsphone. maybe i will install a custom rom to be more comfortable. anyhow it was not simlocked...
bootloader doesnt show device so fastboot doesnt show and unlocked bootloader (H960)
:crying:
USB Debugging okey
Enable OEM Unlock. okey
To get to bootloader without adb:
Turn device off
Hold Vol Down
Insert USB plug while plugged into your PC
Hold Vol Down until fastboot pops up
NOT WORK
adb reboot bootloader
NOTWORK
RE-OPENING restart
This isn't working for me.. When I hold down the volume down key and plug in the device, it just goes straight to the charging screen.
Yes me too
I have Huawei y550. When i turn on my device i get message:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite.
PHONE LOCKED.
When i connect phone with computer, hisuite send me a message " not connected"
I already tried to hold power button for 10 sec, but nothing.
my phone also don't want to boot in recovery mode.
Any help? thanks.
sorry for bad english..
aldeman999 said:
I have Huawei y550. When i turn on my device i get message:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite.
PHONE LOCKED.
When i connect phone with computer, hisuite send me a message " not connected"
I already tried to hold power button for 10 sec, but nothing.
my phone also don't want to boot in recovery mode.
Any help? thanks.
sorry for bad english..
Click to expand...
Click to collapse
It's crazy I tried to turn the the phone on after a year to give it to my girlfriend to use and this is exactly what is happening to me right now. What a retarded thing to happen. There is no solution I guess.
Hi
I just found my old phone in my drawer and it seems to be soft bricked. It's running stock android with no usb debugging, non rooted. 100% stock. When I hold the power button it shows the sony logo but it stays there forever. I can access fastboot mode, however its not very useful as I can't flash (no unlocked bootloader + no usb debugging).
I can boot into flash mode by holding volume down. It shows a green LED but on windows 10 it shows "Unknown USB Device (Device Descriptor Request Failed)"
I already tried the changing the power options on my PC, it didn't help.
I have installed the USB drivers from flash tool (All of them)
Any suggestions on how to unbrick it?
Thanks
Hi. Have you already tried to use Xperia Companion? Usually their instructions on "Repair Device" mode are more than enough to unbrick your phone!
I bricked my metro n200 5g and can't boot into EDL mode.
I can access fastboot and tried rebooting from there but it gave me an error saying "fastboot: usage: unknown reboot target edl"
How can i unbrick my phone?
red5815 said:
I bricked my metro n200 5g and can't boot into EDL mode.
I can access fastboot and tried rebooting from there but it gave me an error saying "fastboot: usage: unknown reboot target edl"
How can i unbrick my phone?
Click to expand...
Click to collapse
Hi red5815,
Are you certain you can't boot into EDL mode? Try the procedures below and let me know If you still can't enter into EDL mode.
Note: Make sure you have all of the necessary USB drivers installed (So your PC can recognize the connected device when it is connected to EDL mode)
First Method
Turn off your device
If you are in CrashDump Mode, I think you must hold down the power and volume up buttons for around 8-10 seconds (Until the screen goes off)
Then, hold down the volume up and volume down buttons simultaneously, and your device should enter EDL mode
While holding down both volume keys, connect your device to your PC via a USB cable
Your device should be recognized
Release the volume keys and press the "Start" button on MSM Tools (This will wipe your entire device, and if the bootloader was unlocked, it will relock it)
Second Method
Start MSM Tools and wait for the "waiting for device" message to appear (Before you start, keep in mind that this process will erase your whole device and relock the bootloader if it was previously unlocked)
Turn off your device and connect one end of the USB wire to your PC
Then connect the opposite end of the cable to your device
For a few seconds, press and hold the volume up, volume down, and power keys simultaneously
Your device should be recognized, and the flashing process should be started
Edit: Added proper warnings
pressing and holding the volume buttons only make it boot to fastboot.
red5815 said:
pressing and holding the volume buttons only make it boot to fastboot.
Click to expand...
Click to collapse
Hi red5815.
It takes a few attempts to get it right. Just make sure that all of the correct drivers are installed. Also, perhaps try using a different cable than the cord that comes with OnePlus Nord N200.
Without being connected to your computer, complete the button combination, and after a second or so, plug your device into the PC with MSM tools open (While still continuing the button combo). The screen will produce a momentary flash of black/green and it will ultimately connect to the MSM tool.
If that doesn't work, try this:
Open MSM tools and pick the appropriate parameters
Make sure your device is turned off
Connect the USB cord to your computer and then connect the other end to the OnePlus Nord N200 while holding the volume up and down buttons
It will then display the "connected" status in MSM tools for perhaps 2 or 3 seconds
Immediately click "start" in MSM tools (This will erase the whole device and relock the bootloader if it was previously unlocked)
Edit: Added proper warning
ive tried installing the drivers but i cant seem to get the qualcomm ones installed
red5815 said:
ive tried installing the drivers but i cant seem to get the qualcomm ones installed
Click to expand...
Click to collapse
nvm i had to get it from several different sites, its working now and unbricked!
red5815 said:
nvm i had to get it from several different sites, its working now and unbricked!
Click to expand...
Click to collapse
Red5815, great job! I'm glad you were able to get your device operating again.