I flashed my phone to CM 12.1 , But i am facing a problem while preliminary android setup(The screen that comes first after resetting}. The bottom portion of my touch screen doesnt work. I need a way to proceed with the steps. is there any way to bypass it or skip?
sudiptod02 said:
I flashed my phone to CM 12.1 , But i am facing a problem while preliminary android setup(The screen that comes first after resetting}. The bottom portion of my touch screen doesnt work. I need a way to proceed with the steps. is there any way to bypass it or skip?
Click to expand...
Click to collapse
Don't flash gapps, just flash rom then reboot. Once it's boots reboot to recovery and flash Gapps.
sachin n said:
Don't flash gapps, just flash rom then reboot. Once it's boots reboot to recovery and flash Gapps.
Click to expand...
Click to collapse
Actually i need a way to bypass the welcome screen as i said the bottom portion of my screen doesnt work
sudiptod02 said:
Actually i need a way to bypass the welcome screen as i said the bottom portion of my screen doesnt work
Click to expand...
Click to collapse
Oops! Try rotating your phone, if it's works then finish the setup?
sachin n said:
Oops! Try rotating your phone, if it's works then finish the setup?
Click to expand...
Click to collapse
Rotating my phone doesnt change the screen orientation. Actually i am stuck at the android welcome screen where it asks for language. I can select language but cant press next
sudiptod02 said:
Rotating my phone doesnt change the screen orientation. Actually i am stuck at the android welcome screen where it asks for language. I can select language but cant press next
Click to expand...
Click to collapse
Ahhh, damn.. Get the screen replaced that's the only way to go.
Related
I have a ploblema that flashing stock roms I can not lock the phone. not leave the lock screen and follow the complete steps .. I have flashed several times and nothing
Enviado desde mi GT-I9100G usando Tapatalk 2
jees16 said:
I have a ploblema that flashing stock roms I can not lock the phone. not leave the lock screen and follow the complete steps .. I have flashed several times and nothing
Enviado desde mi GT-I9100G usando Tapatalk 2
Click to expand...
Click to collapse
What's did you mean by you can't lock the phone?
Were you trying to say that "your lockscreen is missing even after flashing so many ROMs"?
Jokesy said:
What's did you mean by you can't lock the phone?
Were you trying to say that "your lockscreen is missing even after flashing so many ROMs"?
Click to expand...
Click to collapse
what I meant is that the phone is not locked to squeeze the lock button to turn off the screen and turn it back precionar but does not leave the lock screen, I have tried placing it in pattern but still the same .. and if I let down the lock button turns off quickly without leaving the box if you want to restart etc
jees16 said:
what I meant is that the phone is not locked to squeeze the lock button to turn off the screen and turn it back precionar but does not leave the lock screen, I have tried placing it in pattern but still the same .. and if I let down the lock button turns off quickly without leaving the box if you want to restart etc
Click to expand...
Click to collapse
post a picture of what the problem is. Your English confuses me
Jokesy said:
post a picture of what the problem is. Your English confuses me
Click to expand...
Click to collapse
I think he's saying that when pressing the power button to lock, then unlock, the lockscreen doesn't come up, but just unlocks the phone, and when he long presses power, it just shuts off the phone instead of presenting the power button menu.
OP, am I right?
If so, then you need to root your phone, create a file in /efs/imei called keystr, that contains the word ON, and set its permissions to rw-r--r--. There are a few different ways to do this.
Need Help!
ctomgee said:
I think he's saying that when pressing the power button to lock, then unlock, the lockscreen doesn't come up, but just unlocks the phone, and when he long presses power, it just shuts off the phone instead of presenting the power button menu.
OP, am I right?
If so, then you need to root your phone, create a file in /efs/imei called keystr, that contains the word ON, and set its permissions to rw-r--r--. There are a few different ways to do this.
Click to expand...
Click to collapse
Hi, that's exactly my problem after I used Odin to update my SS2 I9100G from Gingerbread to ICS 4.0.4. Can you please give me more details as to how to do this exactly? I have never rooted my phone so I don't know much.
Thanks a lot!!
chuotnhoc2003 said:
Hi, that's exactly my problem after I used Odin to update my SS2 I9100G from Gingerbread to ICS 4.0.4. Can you please give me more details as to how to do this exactly? I have never rooted my phone so I don't know much.
Thanks a lot!!
Click to expand...
Click to collapse
If you are using a custom rom like cm I got rid of that problem when I flashed gapps.zip.
Edit : You haven't rooted huh? It's easy just like flashing a stock rom, just search, there are several guides regarding this matter.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
king_below_my_lord said:
If you are using a custom rom like cm I got rid of that problem when I flashed gapps.zip
Click to expand...
Click to collapse
Worked like a charm. Thanks
I have used SP Flash Tool to flash a supposed JB rom (http://www.moulnisky.com/index.php?dir=Iball/Slide 3G7271/) for my slide. It resulted in the screen "Encryption Unsuccessful". So banged my head for sometime and final figured out how to flash the back up I made before (have to select the correct recovery. [email protected] oscarblue48).
Now its working fine! This is where I should have shut up and go about normally. BUT NO, the effin itch . I don't know why, but I went to 'Backup and Reset -> Factory Data Reset'. That's it. I shouldn't have done it (DAMN.) The phone kept looping between logo and recovery where the progress bar is going on. Both these screen repeat one after the another.
So again flashed the Backup but no luck this time. So I flashed the 'JB ROM' and flashed the Backup. This time its a black screen (that is lit) and can't be shutdown. Hence no way to flash anything! I pressed the power off for more then 10 secs - no, pressed all the buttons - no, removed the case - the battery is not exactly removable.
What can be done now?
Edit : I have rooted the phone with MTK droid tools just before all this.
blazzer12 said:
can't be shutdown. Hence no way to flash anything! I pressed the power off for more then 10 secs - no, pressed all the buttons - no, removed the case - the battery is not exactly removable.
What can be done now?
Click to expand...
Click to collapse
Have you tried this? don't know if it works or not, but if you can turn off your tablet maybe you can flash your backup again.
http://forum.gsmhosting.com/vbb/f606/how-hardreset-iball-slide-1602898/
oscarblue48 said:
Have you tried this? don't know if it works or not, but if you can turn off your tablet maybe you can flash your backup again.
http://forum.gsmhosting.com/vbb/f606/how-hardreset-iball-slide-1602898/
Click to expand...
Click to collapse
Wow. Thank You Man! IT WORKED. :laugh:
blazzer12 said:
Wow. Thank You Man! IT WORKED. :laugh:
Click to expand...
Click to collapse
Ha that's great, you should thank the guy on that other forum, all I did was google the problem,
oscarblue48 said:
Ha that's great, you should thank the guy on that other forum, all I did was google the problem,
Click to expand...
Click to collapse
Yup, I did thank him. I searched all over, but couldn't find any.
Thank you saving me two times! :angel:
Hi everyone,
I have an Alcatel One Touch Pop C5 (Alcatel 5036D). I made a backup in stock recovery before I installed the Xposed framework. After the installation i did a reboot but it stuck at the boot logo. Then i restored my backup but it didn't work, the screen just turned black, so after an hour i restarted my phone. Now I can't do anything, i can't even get in recovery (but it is a soft brick, i can still see the boot logo). I guess i will have to flash the ROM again but i'm a newbie (I installed some customs ROM's before but not on this phone), and no custom ROM's are available. Does anybody know what to do? I would really appreciate your help!
Here alcatel mobile upgrade software.it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
I'll try to deodex the stock ROM ...
lohanbarth said:
Here alcatel mobile upgrade software[/URL].it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
Click to expand...
Click to collapse
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
senna98 said:
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
Click to expand...
Click to collapse
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
DeNarco said:
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
Click to expand...
Click to collapse
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
senna98 said:
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
Click to expand...
Click to collapse
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
DeNarco said:
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
Click to expand...
Click to collapse
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
senna98 said:
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
Click to expand...
Click to collapse
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
DeNarco said:
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
Click to expand...
Click to collapse
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
senna98 said:
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
Click to expand...
Click to collapse
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
DeNarco said:
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
Click to expand...
Click to collapse
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
danibosev said:
I'll try to deodex the stock ROM ...
Click to expand...
Click to collapse
That would be awesome! But doesn't it slow down a lot?
senna98 said:
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
Click to expand...
Click to collapse
Glad to hear You succeeded
Help please !!!!!!
DeNarco said:
Glad to hear You succeeded
Click to expand...
Click to collapse
im a new with this... i was able to install ctr recovery, my phone is soft bricked (i installed gravity box jb ) rebooted and now my phone is soft bricked... so i can get into recovery mode... thats great but i dont know how to restore or get working again... i promise im not lazy, i ve read a lot here still need like tutorial on how to do it ... steps to follow thanks in advanced
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.
PS: XPOSED Framework does not work on POP C5
pop c5 bricked
lohanbarth said:
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.[/URL]
PS: XPOSED Framework does not work on POP C5
Click to expand...
Click to collapse
Thanks for replying (i dont have backups nor roms)
so...i can get into carliv CTR recovery .... i guess its different than ''stock recovery mode'' right??? so im doing the mobile upgrade workaround rightnow... will give it a try
my understanding is : once upgrade is done you wait around 40 min then try to restart phone and get into recovery mode? then wipe and boot (that should bring my c5 back to life right?)
when say wipe you mean like factory reset?
Now my question is ... When i do power button + volume up key it brings up carliv ctr recovery instead of stock recovery mode... would that make a difference for this work around???
u think i will be able to recover my c5?
thanks so much i hope it works... thanks in advanced , would like answers to my questions
Xposed Framework Version 2.3.1 with Gravity Box 3.0.2 works with Alcatel One Touch Pop C5
Be careful not to update them.
Download Links:
Xposed Framework 2.3.1.apk
Gravity Box - JellyBean - 3.0.2.apk
Alcatel 5036
There has been a software update for the POP C9 will xposed v 2.6.1 work with this?
Hi i need help, my oneplus x has the screen unstable. When you unlock i cannot access anything that the image begins to move and change color as shown in the video. Recovery mode works well and the image does not move, but I tried to change the system but exactly the same thing happens. I've also gotten twrp and rom but it works the same. Sorry for my english
https://drive.google.com/open?id=15yH3uabKfxfgqtkdV5xr0WsVSvEq9Tsc
It happens even when the phone isn't charging I presume ?
Did you try to re flash over the full rom build?
https://www.oneplus.com/fr/support/softwareupgrade/details?code=3
If so, I'm afraid it's a hardware problem and it's about to die...
Frankly it appears to be a hardware problem. It's strange that the recovery mode works fine though.
Kéno40 said:
It happens even when the phone isn't charging I presume ?
Did you try to re flash over the full rom build?
https://www.oneplus.com/fr/support/softwareupgrade/details?code=3
If so, I'm afraid it's a hardware problem and it's about to die...
Click to expand...
Click to collapse
If it works the same, less in recovery mode and loading without starting
SpaceDye said:
Frankly it appears to be a hardware problem. It's strange that the recovery mode works fine though.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1E_VYrizu0ryXeeKTWtRF8gqjVp9MJdWO/view?usp=drivesdk
I also think it's hardware but I want to discard and know what it's due to or what happens to it.
Motherboard that start failing....
Kéno40 said:
Motherboard that start failing....
Click to expand...
Click to collapse
https://drive.google.com/open?id=17dGg1usfUz4ioSR_K0RXlZqTNrWWxMem
Yes, there's no doubt.
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
StormTrooper89 said:
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
Click to expand...
Click to collapse
Does touch work in twrp?
sotosgolf said:
Does touch work in twrp?
Click to expand...
Click to collapse
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
have you tried reflashing miui through mi flashtool in fastboot mode?
If you can fast it to fastboot perhaps flash the original miui. Maybe you flash a 75hz kernel that some pocophone is not compatible I already did that but twrp is sure working for me though.
StormTrooper89 said:
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
Click to expand...
Click to collapse
If you have kept a vendor image backup of after you unlocked the phone, flash it. Differently, your only option is flashing your original miui via fastboot (not an update).
StormTrooper89 said:
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
Click to expand...
Click to collapse
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
D1stRU3T0R said:
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
Click to expand...
Click to collapse
I flashed Lawrun K. But don't worry I didn't blame him the dev for the cause of my phone.
I already flash stock miui using miui flash tool. Even flash the outdated version in hope that it will back to normal but it's not.
What bad is that in any screen, either home, stock recovery nor twrp the touchscreen won't work. The rest work perfectly. It can boot, can flash via adb, flash tool whatsoever.
Right now i cant replace my screen yet due to covid19 restrictions order to stay at home and all shops closed. If any of you guys have idea please do share. For the dev of Lawrun Kernel, it's not your fault. I already understand the risk of flashing all this tweaks.
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
stinka318 said:
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
Click to expand...
Click to collapse
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
StormTrooper89 said:
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
Click to expand...
Click to collapse
It is ashame that there not some sort of way to modify Samsung's remote system that you plug it in to your laptop and can control it without the use of the touch screen.......