Related
I just bought this HDMI DLNA / Miracast receiver stick. The model seems to be a "Ugoos UG017" aka "Chromecast MD321" aka "MOCREO iPush M1" aka "HI762 HI763 (Chromecast)" aka "CX-V3" aka "PTV-2R" and possible more names. The hardware is:
- Rockchip RK2928-G @~1GHz
- 256MB DDR3
- 16 MB NAND
- RT3188 WLAN-Chip
- Push-switch to toggle DLNA / Miracast mode
There seems to be a UART available on some test points on the PCB. Any ideas on how to connect to that (settings)?
DLNA through BubbleUPnP is more or less working (skipping seems to lock the stick, playing playlists too), but Miracast is not, at least not on my Xperia L with CyanogenMod 11 / FXP 333.I tried the firmware for the "Pipo X5" and "MOCREO iPush M1" (both ~14MB) and both worked. Both state version "3.0.0-rc2". I would be thrilled if someone could link to a newer (and hopefully more bug-free) version than that...
EDIT: If found a link to a much better firmware (v5.0.0-rc2) for the CX-V3 here. DLNA is much better. Miracast still does not work, but I suppose that's just FXP 333...
if someone is interested this firmware allowed me to miracast with a samsung galaxy tab s
tried other firmwares (CR-M200,ugoos-ug017,CX-V3) but only this was updated
http://www.cloudnetgo.com/CR-M200S.htm
Regards
galaxy tab s
Hi Lucize,
I tried the firmware you posted, but the problem remains: "Impossible to initiate screen mirroring due to a HW problem"
What Android version do you have on your TAB S? Is it a 8.4 or 10.5 version?
Thanks in advance!
CR-M200 firmware on WiFi Display Dongle M806 on SM-G900V
lucize said:
if someone is interested this firmware allowed me to miracast with a samsung galaxy tab s
tried other firmwares (CR-M200,ugoos-ug017,CX-V3) but only this was updated
Regards
Click to expand...
Click to collapse
Thank you so much, lucize! It worked! I was able to miracast with my Galaxy S5 using the built in screen mirroring function. My android version is 4.4.4.
I got a Tronsmart CX-V3 dongle and I was wondering how to update it, since Tronsmart has -of course- no updates. So tried to find some more clones who could have an update and maybe even the manufacturer.
The latest I managed to find is version 9.0.0, dated 21-4-2015, by Ergotech. Their MD3054 and MD3056 seem to be the same according to the doc file in MD3054's update (8.0.0 rc1) (*1), so I downloaded MD3056's (*2) and flashed it. Sunchip-Tech strongly advices to update the software(*3), so i didn't have any hesitations.
A PDF included in 3056's update as well in the *3 link, indicates that there is OTA update option via the manufacturer (Sunchip-Tech). This means that maybe all Miracast sticks of this manufacturer can be updated directly by Sunchip-Tech. Keep in mind that the menu language will be switched to Chinese after the update, but it can be very easily switched back to English in the settings menu.
Ergotech's download page can be found in link *4.
While searching, I noticed than some RK2928 based Miracast dongles were called Lollipop (not because of Android). I searched a bit more and found Rockchip's user guide for RK2928 wireless HDMI dongles(*5), which calls RK2928 dongles as Lollipop. Seems that the reference Rockchip design is followed by the manufacturers. In that user guide I noticed the settings screen is same as my dongle's, but the main screen picture is different though same to some other RK2928/Lollipop dongles I had seen while searching. So probably there is an other manufacturer who kept the original main screen and maybe has even newer software. I did some more searching and the latest I could find is CloudNet's 3.21.00 (dated 28-5-2015) for CR-M200S. This one has OTA settings too, unveiling its manufacturer is Hotack. I believe it is a newer version than Ergotech's/Sunchip-Tech's version 9.0.0 because it has boot version 1.41 instead of 1.40.
CR-M200S download page is at link *6 and in lucize's post too.
Relatively new firmwares are also available by these companies:
Emtec (emtec-international.com/en-eu/Firmware-F100)
Ugoos (ugoos.net/A3S)
*1 drive.google.com/file/d/0B3bETZxL2iACYXdvV2VIdVh4dUU/view
*2 drive.google.com/file/d/0B3bETZxL2iACRXRZWndNRDRwZmM/view
*3 ergotech.com.tw/tw/newsdetail.aspx?id=106
*4 ergotech.com.tw/tw/Download_detail.aspx?key=
*5 upload.sunsky-online.com/res/drivers/S-EAT-0179.pdf
*6 cloudnetgo.com/CR-M200S.htm
talos_2002 said:
I did some more searching and the latest I could find is CloudNet's 3.21.00 (dated 28-5-2015) for CR-M200S. This one has OTA settings too, unveiling its manufacturer is Hotack. I believe it is a newer version than Ergotech's/Sunchip-Tech's version 9.0.0 because it has boot version 1.41 instead of 1.40.
CR-M200S download page is at link *6 and in lucize's post too.
*6 cloudnetgo.com/CR-M200S.htm
Click to expand...
Click to collapse
I can approve that the CR-M200S firmware you linked works quite well. Have you tried the OTA update too?
Latest firmware (MD3056PW 3/sept/15) is from ergotech. Version 10. However there is no dlna subtitle support yet. I am waiting for this firmware to appear soon. None of the firmwares support subtitles over dlna. There is a metadata code that can be used on the firmware to support subs. My nas network disk (twonky server) supports metadata as most do. I am using version 10 without any problems. The only other problem I have is my tablets resolution which is not supported, 1280x 800, which gives me black borders on the sides on the casting TV (when on landscape). I have tried all firmwares with the same result.
There is a metadata code in ezcast forum that they have used to display subtitles over dlna which I am not allowed to post.
Also I have managed to use kodi/xbmc to display videos over dlna but no subs support again. There is a YouTube video and files you need in order to accomplish this.
cypriot said:
Latest firmware (MD3056PW 3/sept/15) is from ergotech. Version 10. However there is no dlna subtitle support yet. I am waiting for this firmware to appear soon. None of the firmwares support subtitles over dlna. There is a metadata code that can be used on the firmware to support subs. My nas network disk (twonky server) supports metadata as most do. I am using version 10 without any problems. The only other problem I have is my tablets resolution which is not supported, 1280x 800, which gives me black borders on the sides on the casting TV (when on landscape). I have tried all firmwares with the same result.
There is a metadata code in ezcast forum that they have used to display subtitles over dlna which I am not allowed to post.
Also I have managed to use kodi/xbmc to display videos over dlna but no subs support again. There is a YouTube video and files you need in order to accomplish this.
Click to expand...
Click to collapse
I tried this vs the CR-M200S firmware, and the CR-M200S firmware is still the best imo. With my iphone that is the only one where mirroring works, and it seems to be less buggy.
Still awaiting a new better update than the CR-M200S . Youtube doesnt work with any of them!
have someone tried mirroring wich this device on wp 8.1?
lokura said:
have someone tried mirroring wich this device on wp 8.1?
Click to expand...
Click to collapse
I also have the same problem. WiDi of windows 8.1 (with supported hardware) does not work with the Chinese miracast dongle RK2928. I get the message:
Your HD digital display device did not supply the required identification data (EDID)
I found this site from sunchip, they say its workin on win 8.1 http://www.sunchip-tech.com/prod_view.aspx?TypeId=12&Id=71&FId=t3:12:3
on the screen captures you can see the firmware versión is 6.0.0 rc3, Im looking for it now in order to test.
working on wp 8.1 witch the soft from ugoos.net/A3S
lokura said:
working on wp 8.1 witch the soft from ugoos.net/A3S
Click to expand...
Click to collapse
Thanks. I will try this too.
I was able to test ergotech v10 firmware. After extensive tests It only worked with WIDI 3.5.41.0 driver. None of the latest intel WIDI drivers worked.
I will try to install ugoos firnmware to see if it works with latest intel WiDi drivers.
Thanks.
Update
Ugos A3S does not work on my Lenovo T420 laptop and Widi Intel 4.3.4.0 (((( I get the same message as before.
Update:
No firmware works with latest WiDi driver.
The only WiDi driver which works with any rk2928 firmware (I tried 3 firmwares) is 3.5.41.0.
Hardware:
Intel i5-2520M VPro
Intel Processor Graphics 3000 HD
Intel Centrino Ultimate-N 6300 WiFi
Drivers
Graphic 9.17.10.4229
Wireless: 15.18.0.1
Software
WiDi application 3.5.41.0 installed 4.3.4.0 recommended (by intel widi update tool but is not working)..
The rk2928 firmware is miracast dlna airplay compatible, without any subtitle support over dlna.
For summary if you want widi support under windows 8 (8.1) then for me only intel widi 3.5.41.0 driver is working.
Also if you want dlna support under windows 8.1 it is possible. Samsung did produce a allshare excellent application which they have now discontinued, and is working like charm under windows 8.1.
Search google and download the Samsung allshare with version: 2.1.0.12031.10 (also called 2.1.0.12031_10)
Last point. For me ergotech V10 is the best firmware on Rk2928 dongle (as I have tested. My dongle used to display a connection name: lollipop)
ios9 airplay
Since ios9 update on iphone Airplay does not work on these dongles any more! and none of the firmware.
The latest firmware located on the ergo-tech website (ergotech.com.tw/tw/Download_detail.aspx?key= firmware v.11.0.0 and 3.0.0 here) claims that it supports ios9, but i have tried ios9.0.2 and 9.1 on these with iphone and it does not work.
Does anyone know a way of getting ios9 airplay to work?
There is a RK2928 dongle which claims to have ios9 support, the Visonicom RealCast VMD-RK156 realcastptv.com/tag/WiFi-display-dongle-Rockchip-RK2928) but i cannot find a firmware download for it.
Kabeern said:
Since ios9 update on iphone Airplay does not work on these dongles any more! and none of the firmware.
The latest firmware located on the ergo-tech website (ergotech.com.tw/tw/Download_detail.aspx?key= firmware v.11.0.0 and 3.0.0 here) claims that it supports ios9, but i have tried ios9.0.2 and 9.1 on these with iphone and it does not work.
Click to expand...
Click to collapse
Firmware 3.0 disables the wifi. So it does not work.
Firmware 11 has problem with the quality. Frames are skipping and video picture gets distorted.
I have tested firmware 11 extensively it is has flaws in video quality. Only ergotech firmware 10 works flawlessly.
I am back on firmware 10.
Tested hardware: miracast rk2928, Lenovo T420 with windows 8.1, intel HD 3000 graphics card, and widi 3.5.41.0 and intel centrino ultimate N-6300 and KODI (xbmc)..
Dear Friends I am in ingrate and desperate situation, I have a briked device m806 black one with antenna, I have Prepare IDB Fail no boot and i try 50 time to flash nothing,I make 2pin shortcut and I have blue square in RK BATCH TOOL 1.7 ,but when i push RESTORE button IDB fail erorr continous! Any advice please,I have a briked device!
alesul said:
Dear Friends I am in ingrate and desperate situation, I have a briked device m806 black one with antenna, I have Prepare IDB Fail no boot and i try 50 time to flash nothing,I make 2pin shortcut and I have blue square in RK BATCH TOOL 1.7 ,but when i push RESTORE button IDB fail erorr continous! Any advice please,I have a briked device!
Click to expand...
Click to collapse
If you are using Windows 8.1 or 10, try flashing your device with windows 7.
I try with 7 and nothing!
any help???
I am looking to do some development for Android TV and need a physical TV to test on.
I have access to a Philips Android TV (2015 model) and there is no way to sideload an APK (this has been confirmed fully by Philips themselves)
So I need to get a new physical device for testing purposes.
Does anyone know of an Android TV make & model that allows for sideloading APKs?
mr_pablo said:
I am looking to do some development for Android TV and need a physical TV to test on.
I have access to a Philips Android TV (2015 model) and there is no way to sideload an APK (this has been confirmed fully by Philips themselves)
So I need to get a new physical device for testing purposes.
Does anyone know of an Android TV make & model that allows for sideloading APKs?
Click to expand...
Click to collapse
What model do you have? 49PUS7150 can be easily rooted. Follow this this guide...
It's a 5500 model, so no ADB at all
mr_pablo said:
It's a 5500 model, so no ADB at all
Click to expand...
Click to collapse
Your TV is based on chassis QM15.2E LA. Other users have claimed that after the released update of official firmware from March 18th in firmware version QM152E_000.005.210.000 ADB and unknown sources are enabled...
You can intall APKs on the amazon fire tv. but I'm not sure it this is what you are looking for. As it is a modified version or android the google play services and so on are not visible
I have an H96 Pro Plus with android 7.1 that is no longer compatible with some apps. Build NHG47L.20170922 test-keys.
How can I update this?
[email protected] said:
I have an H96 Pro Plus with android 7.1 that is no longer compatible with some apps. Build NHG47L.20170922 test-keys.
How can I update this?
Click to expand...
Click to collapse
It seems this device will ever get android 8 or 9.
Slower chipsets are getting Android 8 or 9,i don't understand why the S912 chipset hasn't got it also [emoji28]
Which apps are no longer working with the 7.1?
Enviado do meu POCOPHONE F1 através do Tapatalk
NETFLIX for starters
TheBlackening said:
It seems this device will ever get android 8 or 9.
Slower chipsets are getting Android 8 or 9,i don't understand why the S912 chipset hasn't got it also [emoji28]
Which apps are no longer working with the 7.1?
Enviado do meu POCOPHONE F1 através do Tapatalk
Click to expand...
Click to collapse
[email protected] said:
NETFLIX for starters
Click to expand...
Click to collapse
That's strange, because Netflix works in all my Android 7 boxes. My H96 Pro Plus included.
But I'm using a custom firmware on it.
Superceleron's SCV7 for the H96 Pro Plus.
Is the Netflix app not working or you just can't download it from Playstore?
If it is the second one, know that one cannot install Netflix from Google Playstore on rooted devices, and almost all android tv boxes are rooted. But... you CAN manually download the Netflix app from sites like apkmirror.com or apkpure.com.
If the newer versions don't work in HD, try Version 4.16.
Its seems I have 2 identical boxes but with different builds. Both H96 Pro Plus 3gb 32gb. S912
Build NHG47L.20170922 test-keys works with Netflix
Build NMF26Q.20170524 test-keys says Netflix need to be updated but then in Google Play Store it says its not compatible with this device.
Like i said, on rooted devices you cannot download netflix from google playstore, even if it is already installed.
You will have to download it from sites like apkmirror or apkpure.
There is newer firmware for the H96 Pro Plus , latest i am aware of is 20180409.
But it is always rooted firmware.
Thanks.
Where can I download the latest 20180409 firmware you mentioned?
Ideally without having to sign up for a MEGA account.
[email protected] said:
Thanks.
Where can I download the latest 20180409 firmware you mentioned?
Ideally without having to sign up for a MEGA account.
Click to expand...
Click to collapse
You don't need to have an account to be able to download. I got mine from there can't remember from which forum I got the link
Enviado do meu POCOPHONE F1 através do Tapatalk
I know nothing about Android 8, or 9 on H96 Pro Plus, but you should be able to find firmware in this Mega folder:
Code:
https://mega.nz/#F!8qhRRaYJ!2ZA3VLjvLT6wg0IwsTF27g
You will find roms, launchers and other tools there. Quite handy for our little tvbox - and you don't need a Mega account to download.
As for Netflix, I have no clue about the other rom versions as I too use NHG47L.20170922 test-keys build, but the way I coped with inability to install Netflix on various devices was to use some custom app store like ApkPure for example. Few months ago I used modified version of netflix apk, just to have better video quality (natively it was 480p, but looked quite horrible) - but it stopped working some time ago, so I was forced to switch to original one - from ApkPure store.
And if you're not satisfied with video quality (I haven't used netflix for some time, so I have no idea how's the resolution issue on L3 devices) - use Kodi netflix addon. It is really good in terms of quality - 560p I believe, but looks better.
edit: also check here
Code:
http://firmware.mxqproject.com/files/firmware/Amlogic/S912/H96Pro+3GB/Nougat/
I am having H96 Pro Plus with updated Android ver 7.1.2, the pre-installed You Tube is not working, what i have to do?
smrajadurai said:
I am having H96 Pro Plus with updated Android ver 7.1.2, the pre-installed You Tube is not working, what i have to do?
Click to expand...
Click to collapse
I think the pre-installed version is really old.
It you prefer using the tv version of YouTube, i advise you to install smartyoutube (it's not on playstore) or you can install the regular phone android.
Enviado do meu POCOPHONE F1 através do Tapatalk
Hi I have an H96 proplus which isnt working for disney plus and i think it is because we dont have the firmware. I have got to the link posted above mega.nz... but dont actually know what to do next - can anyone post an idiots guide please?
Keep Android 7.1.1 on your H96 Pro+
My H96 Pro+ is about 5 years old and there is only one app that dont work on my box its the CW app.
Netflix works perfect up to version 7.42 so don't update your Netflix over version 7.42.
You don't have to root the H96 Pro+ it works better without root. You can update all your other apps with ApkPure
No matter how long time my tvbox is used without turning it of it never gets more than 45° i have mounted a fan with usb on it and i have modifiet it so it have 4xUSB ports i can watch 10 seasons i a row and it don't get hotter than 45°
I have try many boxes but none of them can compete with the H96 Pro+ it can use sd-card up to 512gb and i have never any problems with my box.
The build is NMF26Q. 20170422 test-keys. I have try to install Android 7.1.2 but it fu*kt up my box and this firmware has many errors so keep the 7.1.1 and remember to update all your apps except Netflix
Here is some pictures of my box.
H t t p s: //imgur.com/a/f42inv7
---------- Post added at 08:11 PM ---------- Previous post was at 07:44 PM ----------
The solution is here ?
h t t p s: //xnetfox.altervista.org/h96-pro/
Flash another firmware
smrajadurai said:
I am having H96 Pro Plus with updated Android ver 7.1.2, the pre-installed You Tube is not working, what i have to do?
Click to expand...
Click to collapse
Youtube is working perfect on my H96 Pro+ with Android 7.1.1 (no root)
Flash your box with the firmware i have then it should work with youtube.
No root H96 Pro+
MikeAndrOS said:
Youtube is working perfect on my H96 Pro+ with Android 7.1.1 (no root)
Flash your box with the firmware i have then it should work with youtube.
Click to expand...
Click to collapse
Hi Mike, which firmware is no root?
I would like to install it, my box bricked yesterday after installing supersu.
Thanks in advance.
Hi. My H96 Pro Plus frequently goes blank and shows "No Signal". Sometimes it shows "Unsupported Device". These days it has started going off and on multiple times on its own, like it is possessed !
Is there a known solution for it?
Good news: Android 9 available for H96 PRO+ (Amlogic S912)
Hi, I hadn't turned on my H96 PRO + for a long time. It still had Android 6 and several apps not working. After some tests with 7.1.1 and 7.1.2 mod. I managed to install Pie. https://daivietpda.com/2020/07/rom-atv9-android-9-0-cho-amlogic-s912/
I had some difficulties because with burning sd card it stalled and with direct flashing through the burning tool the .img file failed in parsing.
I managed to install thanks thanks to "Amlogic_USB_Burning_Tool_v3.1.0" https://androiddatahost.com/fq58z with USB A-A cable and power supply connected.
ROM seems exceptional to me! Great! Also perfectly compatible with control devices and in particular with the G30 air mouse remote control, which can provide voice input for Google Assistant.
Right now I'm looking at beta2 version (just seen there is an OTA update). With that version the issues I found:
- very few compatible web browsers (Chrome, firefox, etc. not working): at the moment I have installed TVWeb
- Netflix update not working. I think it can be overcome by installing a suitable version. What version do you suggest?
- Unfortunately, some restarts in my opinion due to excessive heating: unfortunately I see that it reaches 72 ° C and around that temperature it restarts. It will therefore be necessary to find a solution to improve cooling or slow down the device. Tips?
Edit:
-flashed OTA v3: it's OK!
- disinstalled Netflix and installed Netflix_v7.59.1 build 27 34902 via apk: Working!
- Youtube (and channels) working
- Youtube Vanced working
Hi MediaTerraneo,
I am trying your solution, but it ends at 2%. I do not know which version of H96 I got but is the image universal or is it working only with specific boards?
Hi, at the source page https://daivietpda.com/2020/07/rom-atv9-android-9-0-cho-amlogic-s912/ you can find some fw for specific devices. Consider H96 can be with various hw; I have tested with Amlogic S912, ram 3gb.
Edit: Try to install from the Store an app that can discover your hw configuration.
Thank you very much for your quick reply. I got the exact same hardware (Amlogic S912, ram 3gb and 1000MBPS LAN). Can you write the name of the img you used at first place before upgrading to beta 3 over OTA?
I bricked my new box Tanix TX6S - Allwinner H616 - Android 10 - 4GB/64GB
I wanted to activate the NavBar editing the build.prop - but something went wrong.
Now i got a bootloop and cannot more boot to system. Only i can go to the stock recovery, but i dont have a firmware image to burn it on card with Phoenix Cardburning Tool.
Already contacted Tanix, but no answer (chinese new year?).
Somebody has this firmware?
or can make a backup in the stock recovery tool, so i could try to restore my system with this file in my stock recovery? Is there any possibility?
Thanks for the help.
Nobody can help, on Tanix HP there is nothing. I think very bad from Tanix side to buy this box without offering the firmware image...
No help ?
is there no custom firmware for the h616 boxes? I just got a box but the UI sucks and is laggy, i'd like to change it anways .
If there is a guide I can try to extract it and provide you, but my box is 4/32
there is the stock firmware image on the tanix home page. http://www.tanix-box.com/download-view/tanix-tx6s-firmware-allwinner-h616-original/
Also got this. There's no way to get Android TV on this, is there? I was happy that this came with Android 10 but Netflix isn't working, HBO isn't working. I don't know what the hell is wrong with it.
Can I flash this on T95 H616?
Gaugamala did you find any solution?
Unfortunately not. I haven't had the time lately to even turn the TV on.
Here is the link with all the firmware until now for tx6s https://drive.google.com/drive/folders/1xSony4Dz9Wl2kQYlx77nRN5V4lG-fmgt
Upper bar doesn't work
Hi, I have the same box tx6s , in some programs like Cinema HD the controls on upper bar doesn't work with remote. are you guys experiencing such issue. I thought may be the firmware version has got the bug. if any body have it working then can you please let me know, what version of firmware you are running on. or if there is any fix for that. I can get is working only by using mouse.
hmoo7 said:
Hi, I have the same box tx6s , in some programs like Cinema HD the controls on upper bar doesn't work with remote. are you guys experiencing such issue. I thought may be the firmware version has got the bug. if any body have it working then can you please let me know, what version of firmware you are running on. or if there is any fix for that. I can get is working only by using mouse.
Click to expand...
Click to collapse
@hmoo
Hi.
Install Power Shade:
Grant to Power Shade permissions:
Accessibility and
Access to notifications,
And you will have a functional top bar (status / notifications).
I use it here on my TX6S with stock firmware (Tanix-Box_com-TX6s_android10_20200730.img).
Best regard.
Sorry, I made a mess!
Hi, webipsum
no I didn't mean the status / notifications bar. if you install cinema HD app the remote doesnt work top bar where you got the search button and drop down menu for genre
I am having same issue with RedBox tv app as well the top bar doesn 't work with remote.
I mean top margin of the screen area. I am also running same image (Tanix-Box_com-TX6s_android10_20200730), did some boosting by disabling unecessary apps from startup.
box is running ok, I enabled CEC feature so now my samsung tv remote also works well with the box.
Did anyone manage to do anything with the firmware?
Mine is just an expensive paperweight. Netflix does not work. Nor HBO. Nor my provider TV app. I can't use it for anything and it sucks.
Gaugamela said:
Did anyone manage to do anything with the firmware?
Mine is just an expensive paperweight. Netflix does not work. Nor HBO. Nor my provider TV app. I can't use it for anything and it sucks.
Click to expand...
Click to collapse
I did some modifications, removed youtube as it comes with ads.
installed all-in-one to disables lots of unnessary apps running in the background.
installed smart youtube tv without ads, cinema hd and other useful apps, it works fine after disabling all junk apps running in the background.
https://forum.freaktab.com/forum/tv...-2gb-16gb-2-4g-5-8g-wifi-lan-bluetooth/page28 I found this topic in another forum about the Tanix Tx6s.
It has some links to firmwares that might work well if anyone wants to test.
vesman said:
Here is the link with all the firmware until now for tx6s https://drive.google.com/drive/folders/1xSony4Dz9Wl2kQYlx77nRN5V4lG-fmgt
Click to expand...
Click to collapse
Do you know about "pnpfenin timeout" error during flashing? My device circuit sticker shows "TX6s-H 3104 20200424". I was searching on your link, no firmwares suitable with my device. Please help me! Is here somebody know about my tenix???
Here is what you are looking for:
FIRMWARE: Android 10 para Tanix TX6S con SoC Allwinner H616 (30-07-2020)
Nueva actualización de ROM para el Smart Box Tanix TX6S con el SoC Allwinner H616 que integra procesadores ARM Cortex-A53 y una GPU ARM Mali-G31 MP2. De este Box hay versiones con 2/4GB de RAM DDR3 y 8/32/64 GB de memoria de almacenamiento eMMc. A nivel de conectividad inalámbrica tenemos WiFi...
androidpc.es
Try this firmware flash with Phoenix Suite Tool
Hello, you asked me if there is any ROM based on Android 10 with root or with Google TV for Amlogic S095W (A95XF1), I am sure there are people who want the system in all its splendor without having to buy the New Chromecast with Google TV, but With the apk from another XDA thread I think there should already be ROMs created with Google TV, and if not then I think we can start creating them, the truth is if I could create Custom ROM myself then I already had Google TV, but no I know how to do it, I hope your help. And if they asked ... Si, soy un mexicano.
IoriYagami2001 said:
Hello, you asked me if there is any ROM based on Android 10 with root or with Google TV for Amlogic S095W (A95XF1), I am sure there are people who want the system in all its splendor without having to buy the New Chromecast with Google TV, but With the apk from another XDA thread I think there should already be ROMs created with Google TV, and if not then I think we can start creating them, the truth is if I could create Custom ROM myself then I already had Google TV, but no I know how to do it, I hope your help. And if they asked ... Si, soy un mexicano.
Click to expand...
Click to collapse
Google TV is simply a launcher and you can install it on any Android TV box running Android 9 Pie.
The internet is full of instructions. I tried it a few months ago and it wasn't waorking in my region
Noter2017 said:
Google TV is simply a launcher and you can install it on any Android TV box running Android 9 Pie.
The internet is full of instructions. I tried it a few months ago and it wasn't waorking in my region
Click to expand...
Click to collapse
It's not just google TV, we are still on A9 where as A10 is already compatibile with amlogic someone needs to port it from AOSP to ATV
eagledipesh said:
No es solo Google TV, todavía estamos en A9, donde como A10 ya es compatible con amlogic, alguien necesita portarlo de AOSP a ATV.
Click to expand...
Click to collapse
eagledipesh said:
No es solo Google TV, todavía estamos en A9, donde como A10 ya es compatible con amlogic, alguien necesita portarlo de AOSP a ATV.
Click to expand...
Click to collapse
This is what I say. I'm not just talking about the interface, but about Android 10 for the Amlogics, since all the apps that were extracted from the Chromecast with Google TV will not work on ATV9, such as the native app "Configuration" or the "TV Profile Service", Obviously we need the AOSP code of Android 10 to be able to enjoy Google TV in its entirety, such as the "Ambient Mode", (although unfortunately the installation of "Chromecast Built In" would be needed), or the customization of services or that it is worth it Having the "Google TV" mobile app installed, I would be happy to create a ROM but I don't have the knowledge or a team with the minimum requirements. I can support the beta of some ATV10 ROM (or GTV10 in this case).
IoriYagami2001 said:
This is what I say. I'm not just talking about the interface, but about Android 10 for the Amlogics, since all the apps that were extracted from the Chromecast with Google TV will not work on ATV9, such as the native app "Configuration" or the "TV Profile Service", Obviously we need the AOSP code of Android 10 to be able to enjoy Google TV in its entirety, such as the "Ambient Mode", (although unfortunately the installation of "Chromecast Built In" would be needed), or the customization of services or that it is worth it Having the "Google TV" mobile app installed, I would be happy to create a ROM but I don't have the knowledge or a team with the minimum requirements. I can support the beta of some ATV10 ROM (or GTV10 in this case).
Click to expand...
Click to collapse
i did try a quick port of the google tv firmware (i have a full factory firmware i think) it failed to boot, i also tried on another android 10 rom (for s905x) and it failed to boot, i think its due to VNDK version (the s905x a10 was patched to use VNDK 28, GTV is looking for VNDK29, Also its probably missing alot from vendor partition, i haven't had the time to look into it further though
aidanmacgregor said:
i did try a quick port of the google tv firmware (i have a full factory firmware i think) it failed to boot, i also tried on another android 10 rom (for s905x) and it failed to boot, i think its due to VNDK version (the s905x a10 was patched to use VNDK 28, GTV is looking for VNDK29, Also its probably missing alot from vendor partition, i haven't had the time to look into it further though
Click to expand...
Click to collapse
In theory, we would need to make a GTV10 port, since it runs on an Amlogic chip, but in practice this is complicated by the drivers of the different chips. You will need a ROM for Android 10 Amlogic with root and start installing apks one by one until you see the results. In another thread the Android TV SO apks and the GTV layer were published, it would be done in the way that it would make us reinstall our system about 100 times.
I had posted this URL in another thread, its working A10 (AOSP not ATV) on s912 chipset.
@aidanmacgregor Well google play is secondary, can you port this ROM it works for s912
Яндекс
Найдётся всё
disk.yandex.ru
Noter2017 said:
Google TV is simply a launcher and you can install it on any Android TV box running Android 9 Pie.
The internet is full of instructions. I tried it a few months ago and it wasn't waorking in my region
Click to expand...
Click to collapse
USA Only (Link)
Post For Firmware
https://forum.xda-developers.com/t/custom-rom-with-google-tv.4263635/post-84904839