OFFICIAL Nougat out for A310F (with instructions how to update) - Galaxy A3, A5, A7, A8, A9 General

It's out in DBT (Germany) region via OTA!
Instructions to get it if you have a different CSC:
1. Download this DBT MM firmware: http://updato.com/firmware-archive-select-model?record=51E8D27819B311E7963AFA163EE8F90B
2. Flash with ODIN 3.10.7 (restart phone in download mode, put fw file in AP, leave default settings)
3. Go to settings -> about phone -> manual update (Nougat update will download and install)
Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You forgot one important step :
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
@LE : I confirm that is working

At which point I have to do the reboot?
Thanks.

Really

Stefan662 said:
At which point I have to do the reboot?
Thanks.
Click to expand...
Click to collapse
You have to Reboot Phone in Download Mode before flashing with Odin.

Easy peasy... working 100%... Thanx

Can someone report that sending SMS is working? Mine is not working

Everything works fine

Gycone said:
Can someone report that sending SMS is working? Mine is not working
Click to expand...
Click to collapse
SMS working. Tried it couple of times.
I have been checking the phone all day and everything seems to be in order except there is no way to go split screen in recent apps.
On S7 nougat split screen mode is changed a bit from vanilla Nougat. There is a dedicated button for split screen on every tab when you enter recent apps.
On A3 nougat however there is no such button. Anyone figured it out yet?
---------- Post added at 11:08 PM ---------- Previous post was at 10:57 PM ----------
Apparently multi window view is disabled on A3 2016 Nougat release. I have searched a bit and found that A5 2016 has this feature under Advanced Features-Multi Window but A3 doesn't... What a load of **** since it is Nougat native feature

six37 said:
SMS working. Tried it couple of times.
I have been checking the phone all day and everything seems to be in order except there is no way to go split screen in recent apps.
On S7 nougat split screen mode is changed a bit from vanilla Nougat. There is a dedicated button for split screen on every tab when you enter recent apps.
On A3 nougat however there is no such button. Anyone figured it out yet?
---------- Post added at 11:08 PM ---------- Previous post was at 10:57 PM ----------
Apparently multi window view is disabled on A3 2016 Nougat release. I have searched a bit and found that A5 2016 has this feature under Advanced Features-Multi Window but A3 doesn't... What a load of **** since it is Nougat native feature
Click to expand...
Click to collapse
We could sign a petition for it but it's too much of a hassle for the dev team to make a change just for this one thing. Then again it is something native to nougat which makes the experience half of what it should be. We also didn't get night mode and controlling flash sensitivity. I understand not having features for an ID button but these are the small things which make the experience feel halved. Honestly the update is nice and I'm hoping these features get on with a small update. And even if they don't I'll still wait till this phone dies on me.

Did anyone tried to flash this German MM (DBT region) firmware with having different CSC?
It seems that the original package with this MM is multi-csc and it is defaulting me to XEO and without root (I don't want to root this phone) I am unable to change it (the solution of breaking reflash via Odin to go into recovery to apply different CSC did not work but maybe I did something wrong although followed one guide couple of times). Anyway... anyone has some more experience in flashing this DBT with success?

I had XEH rom, then just flashed this DBT and it worked instantly (even without wipe)

Dodo55555 said:
I had XEH rom, then just flashed this DBT and it worked instantly (even without wipe)
Click to expand...
Click to collapse
Well... I have to say - it "works" fine - I mean - after flashing via Odin the phone boots up correctly without touching the data,etc. Everything works just fine. But it still defaults to XEO anyway.

Prostokuche said:
We could sign a petition for it but it's too much of a hassle for the dev team to make a change just for this one thing. Then again it is something native to nougat which makes the experience half of what it should be. We also didn't get night mode and controlling flash sensitivity. I understand not having features for an ID button but these are the small things which make the experience feel halved. Honestly the update is nice and I'm hoping these features get on with a small update. And even if they don't I'll still wait till this phone dies on me.
Click to expand...
Click to collapse
If you're rooted, try installing Root Essentials, it can be found in the Playstore. In the "Interface" tab is an option to "Enable Freeform window mode - Nougat". It might work.
For Splitscreen mode, edit build.prop and edit/add the line:
ro.build.type
Value = Userdebug
The default is set to "user". Changing this to "userdebug" and rebooting will reveal a new option in "Developer Options" to "Enable MultiWindow Mode".
* Edit: There is an app, also available on Playstore, called Taskbar. This will allow you to use Freeform MultiWindow mode through Taskbar settings, if the above doesn't work. I'm using it for now, on LineageOS as there is no Freeform window support in the current LineageOS build for A310f. It works very well and actually has more configurable options for MW than Samsung's defaults.
** You can use Taskbar without root. Otherwise, root, enable "userdebug", check the switch in Dev'Options, then unroot. The option will still be available.

I found a bug... When you use third party keyboard (SwiftKey in my case) and use default sms app try to click on emoticons button. It instantly tries to switch to Samsung Keyboard for emoticons and it displays that keyboard is not working. Then you must go to Language and Input settings to reactivate what ever keyboard since the selection goes blank... Annoying...

Do i need to root my phone before doing this procedure? Or i can follow this steps without root?

Works perfect!

robi2109 said:
Do i need to root my phone before doing this procedure? Or i can follow this steps without root?
Click to expand...
Click to collapse
No root needed... Just follow steps and dont forget to go to download mode

No need to be rooted? Just follow this few steps and we can install nougat on any a3 2016 model? Can somebody post video how to do That? Or one more time please write exact steps how to Flash nougat over our marshmallow version?

Deadlyblonde said:
Works perfect!
Click to expand...
Click to collapse
It seems that the Android 7.0 for DBT region has been made available for download:
http://samsung-updates.com/device/?id=SM-A310F
Galaxy A3 2016 (SM-A310F) SM-A310F DBT A310FXXU3CQE6 Android 7.0 23.05.2017 11350514 Download File
Additionally - I've just checked with SamFirm and it is downloadable directly from Samsung servers (see the screenshot) And I recommend going with the second way of obtaining the firmware (Samsung servers directly).
Firmware upgraded with Odin and working fine (Upgraded directly from XEO based MM to DBT based Nougat (without installation of DBT MM which did not work for me).\
BTW: I can also confirm the bug with external keyboard and emoticon button (causes crash of Samsung keyboard when clicked ;/

Related

T.A.R.S. 20s USA version EUI 5.8 for X720

Hi, folks.
Im proud to introduce you my new Custom ROM, T.A.R.S. 20s USA version, adapted for our X720 model.
Official changelog:
GMS Apps
Updated GMS package to 6.0_r10 for increased stability & security
Launcher
Added badge display support for app icons on desktop
Messaging
Eliminated ‘No Subject’ header from MMS
Bluetooth
Decreased Bluetooth discoverability duration to 20sec to save device resources
Camera
Camera image processing algorithm enhancement, like anti-shaking, HDR etc.
App Permissions
Optimized display of app permission requests for the following apps (eliminated unnecessary permissions requests at 1st app launch):
1. Backup Service
2. Bug Services
3. Calendar
4. Clock
5. Contacts
6. Dialer
7. Email & Exchange
8. File Manager
9. Gallery
10. Launcher
11. LeEco Account
12. LeEco Cloud Service
13. Notes
14. Recorder
15. Video Player
General Enhancements & Bug Fixes
I dont want erase all extra application of 20s stock ROM, but all apps I convert them so you can uninstall without any apps, directly from ROM. Are this:
Google Chrome
Google Drive
Hangouts
Google Maps
Google Music
Netflix
Google Photos
Google Talkback
Youtube
I have not root either, because root and NFC pay dont work fine. If you want root, flash SuperSU by TWRP.
And included Pixel Launcher, for those that EUI don´t like, and all Google Pixel Live Wallpapers.
If you have installed T.A.R.S. 19s, you can make a TWRP backup of your current version, install 20s, configure Setup Wizard, and then restore from TWRP of your DATA partition. All yours apps and configuration back again.
BE CAREFUL THAT YOU HAVENT ANY PATTERN OR FINGERPRINT TO UNLOCK YOUR PHONE BEFORE BACKUP BECAUSE WHEN RESTORE DATA DONT RECOGNIZED YOUR PATTERN OR FP AT BOOT.
Download link:
https://www.amazon.es/clouddrive/share/tvCkjAfbvR5TrWtu5I0Zm5r9OloLguJ8Z7SYJmU27qS?ref_=cd_ph_share_link_copy
Enjoy ¡¡¡
Thank you. Does this ROM have the December security patch & dual SIM support and, if yes, can you dirty flash it over the previous TARS 20s ( http://forum.xda-developers.com/le-pro3/how-to/t-r-s-eui-5-9-20s-google-service-t3508869 )?
About ss.?
-Tiz- said:
Thank you. Does this ROM have the December security patch & dual SIM support and, if yes, can you dirty flash it over the previous TARS 20s ( http://forum.xda-developers.com/le-pro3/how-to/t-r-s-eui-5-9-20s-google-service-t3508869 )?
Click to expand...
Click to collapse
I think not, its a different base. Make a backup and try it.
-Tiz- said:
Thank you. Does this ROM have the December security patch & dual SIM support and, if yes, can you dirty flash it over the previous TARS 20s ( http://forum.xda-developers.com/le-pro3/how-to/t-r-s-eui-5-9-20s-google-service-t3508869 )?
Click to expand...
Click to collapse
US version of 20s includes Dec 1 security patch, so I assume this ROM still has it.
Ace42 said:
US version of 20s includes Dec 1 security patch, so I assume this ROM still has it.
Click to expand...
Click to collapse
Yes, include Dec 1 security patch.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For who needs SuperSU
After restoring data in twrp I could not unlock screen as it did not recognise my pattern or fingerprint. Not a big loss though, just Whatsapp messages.
Presterin said:
After restoring data in twrp I could not unlock screen as it did not recognise my pattern or fingerprint. Not a big loss though, just Whatsapp messages.
Click to expand...
Click to collapse
Added this warning to OP, thanks and sorry.
STEVE_MARS said:
Added this warning to OP, thanks and sorry.
Click to expand...
Click to collapse
It's okay, not that big deal. Thank you again for this great ROM.
Hi Steve_Mars, I love your ROM, I love it. ( T.A.R.S. 20s USA version EUI 5.8 para X720 )
WITHOUT ROOT, perfect.
- But, wireless display, does not work. ( With the ROM stock 17s, without the root, it worked well )
- the language french is no fully. ( It's not really important to me )
- On the tacticals buttons, click on the small square button, then back with small triangle button, the return does not work.
Thank you very much for your work
LUYULKMOIO said:
Hi Steve_Mars, I love your ROM, I love it. ( T.A.R.S. 20s USA version EUI 5.8 para X720 )
WITHOUT ROOT, perfect.
- But, wireless display, does not work. ( With the ROM stock 17s, without the root, it worked well )
- the language french is no fully. ( It's not really important to me )
- On the tacticals buttons, click on the small square button, then back with small triangle button, the return does not work.
Thank you very much for your work
Click to expand...
Click to collapse
Youre welcome my friend.
Wireless display its a stock USA Rom bug, dont work 20s either 19s USA version. In LeEco Lemax2 X820 only work with Chinese stock ROMs, Indian dont work.
I dont translate, its on stock ROM
I dont understand about buttons, I havent any problem with them
STEVE_MARS said:
I dont understand about buttons, I havent any problem with them
Click to expand...
Click to collapse
Neither do I, backing up from recent apps works just as it should.
The WhatsApp notifications work well here? with CM13 TS Work fine .. but with no stock 20s
Gynlemon said:
The WhatsApp notifications work well here? with CM17 TS Work fine .. but with no stock 20s
Click to expand...
Click to collapse
All stock roms you must use this in dialer: *#*#46360000#*#* and disable last menu option, and reboot phone.
Then all notifications work fine :good:
@STEVE_MARS
Can you take a look how Cuoco has replaced LIVE button on stock launcher on his EUI? Just noticed it in his Facebook page: https://m.facebook.com/story.php?story_fbid=1851097758467492&id=1557470501163554
Presterin said:
@STEVE_MARS
Can you take a look how Cuoco has replaced LIVE button on stock launcher on his EUI? Just noticed it in his Facebook page: https://m.facebook.com/story.php?story_fbid=1851097758467492&id=1557470501163554
Click to expand...
Click to collapse
Yes, you must decompiled launcher3.apk and change button and all around that button. Im sorry, but I havent enough time.
STEVE_MARS said:
Yes, you must decompiled launcher3.apk and change button and all around that button. Im sorry, but I havent enough time.
Click to expand...
Click to collapse
It's ok, your ROM is still awesome. I kinda like EUI, but hate that little button. Would replacing launcher3.apk with version from Cuoco's ROM work? Why I even asked, I try.
Presterin said:
It's ok, your ROM is still awesome. I kinda like EUI, but hate that little button. Would replacing launcher3.apk with version from Cuoco's ROM work? Why I even asked, I try.
Click to expand...
Click to collapse
I think so, buy every launcher3.apk are different. If you want try it, it´s better that you use another lanucher before and make a backup of original launcher3.apk :good:
Doesn't seem like I can pick up LTE band 12, I'm getting no service in a few places where I used to get LTE connectivity. Anyone else with the same issue? I tried flashing the US modem to no avail. My device is the US model x727.

[tweaked] sm-j7108 j7108 6.0.1 Marshmallow Rom with Google Play and bunch of updates!

updated Nougat 7.0 visit here: https://forum.xda-developers.com/galaxy-j7/development/rom-axvy-rom-sm-j7108-stable-sexy-af-t3687461
Bloatwares are removed and This Rom contain Google Play!
Hello guys, are you ready for j7108 or SM-J7108 Marshmallow 6.0.1 update?
- more control over privacy
- new font for lockscreen
- rounded UI
- new transition
- layout changed and some icons updated
- wifi signal is synced in notification panel
- screenshot whole scrollable area!
- spacebar length increased
Weird and lack of change of Marshmallow update:
Swipe screen to unlock even if you got password. Ffs I want to direct enter my password, Samsung!
- still don't have Undo keyboard and don't have Scroll to Top #SamsungAddItPlease
Tips for keyboard:
Set Keyboard Swipe to Cursor Control, when you typing you can move the cursor up down left right easily
Keyboard size is helpful especially for those screen with problem
Note: I mod this Rom for lower Ram usage, save battery life and better performance, you can see all the changes below to decide whether you want to use it or not, some apps can be installed in Play Store.
[Package that are removed]
securitylogagent
silentlogging
ColorBlind_M
youtube
chrome
Hangout
Google app - velvek
flipkart
onedrive
skype
youtube
Edited build.prop for optimisation:
ro.media.enc.jpeg.quality=100 #I seriously don't know if it help, default might is 100 ald
Disables built in error reporting:
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
Disable logcat
logcat.live=disable
Use google Dns for speed:
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
no noticeable boot time speed change but you won't need the boot animation as well (default boot animation is annoying). Assume the battery use to display the animation is saved
debug.sf.nobootanimation=1
and keyboard with red underline on wrong text can be enabled with this rom. Settings > Language and input > Samsung keyboard > Auto check spelling:
My warranty is voided last time because I didn't know about frp lock while flashing wrong rom of other country.
To close Frp Lock, enable Developer Options(google it for step), enable OEM Unlock before flashing
Yet I did not add root to this rom for now, comment if you need it and I do not know if this rom will void your warranty. Feel free comment to tell us.
In summary I think this rom is better, if you have any request, leave a comment below
Again the change of the rom is stated above, download:
https://mega.nz/#!uckzXaIR!1RSv_D22rxkni30z64a9uHCGjgAL-1xh50F45kCJvIk
Second update trimmed junk apps, light version, you will get more space:
https://mega.nz/#!eMdyXZya!ulpQi6tr7bmTxQK-zDUfWU4jeYmfdUDHVwZsdp9hzx8
Third release added edge panel:
https://forum.xda-developers.com/ga...nel-stable-rom-sm-j7108-t3604617#post72240584 leave a like would be nice, extract the .7z
This will update your phone, it will NOT erase anything. I have tested it myself and it's fully functioning.
Fyi, when preparing update it take lot of time processing, don't interrupt it and it will come to the last step optimise app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
t3542561
Hi Thank You so much OP <3 got Google Play installed today, register to Xda-developers to thanks you specifically. Battery life is significantly improved compare to another device of Lollipop.
Keyboard work like charm, I love the new Marshmallow design update.
Thanks again~ muah
http://updato.com/firmware-archive-select-model?record=D1CC27F8D82711E69215FA163EE8F90B official
hapz said:
*removed official
Click to expand...
Click to collapse
Don't be such a jerk, open a separate thread if you want to post something. We are talking about tweaked and bloatwares removed Rom here. Like someone need you to google for them, if it's the untouched firmware I won't post it already
mikasu said:
Hi Thank You so much OP <3 got Google Play installed today, register to Xda-developers to thanks you specifically. Battery life is significantly improved compare to another device of Lollipop.
Keyboard work like charm, I love the new Marshmallow design update.
Thanks again~ muah
Click to expand...
Click to collapse
That's the nicest thing I receive so far. Thanks to confirm it work. Glad you like it, enjoy.
Great work dear,
Worked like a charm, only one thing i noticed, Keyboard and Camera are blinking every 3 sec, but i got it fixed after i made "Hard Reset".
mirosaw2 said:
Great work dear,
Worked like a charm, only one thing i noticed, Keyboard and Camera are blinking every 3 sec, but i got it fixed after i made "Hard Reset".
Click to expand...
Click to collapse
Not saying it's impossible to happen coz that make no sense but thanks for your feedback.
Samsung just push an update. Will post the download link soon, I will be super busy probably till March
Hi doulc
I wish I had seen this thread earlier. Does your ROM have all the Microsoft Office apps in it? I hope not. Currently, in order to get google sevices I am using the HK official ROM but it has MS Office which is huge bloat and I cannot uninstall it. China ROM was less bloat but no google services.
If you say you will have an update in March I will wait for it otherwise I will download and install now. I don't care about warranty void - mine is already voided.
billeuze said:
Hi doulc
I wish I had seen this thread earlier. Does your ROM have all the Microsoft Office apps in it? I hope not. Currently, in order to get google sevices I am using the HK official ROM but it has MS Office which is huge bloat and I cannot uninstall it. China ROM was less bloat but no google services.
If you say you will have an update in March I will wait for it otherwise I will download and install now. I don't care about warranty void - mine is already voided.
Click to expand...
Click to collapse
If you download and install now you will receive update notification (patch of 24/2/2017).
Samsung hasn't push another critical Android's security update of March, I'm waiting for them to release it for j7108.
It do have Microsoft Office coz it's useful sometime(for me I use Xcel, word, pp) when opening documents sent by someone or offline viewing.
I'm lack of enthusiastic right now, if you don't mind I appreciate it if you can donate me 2$ and I can help to build the Rom without Office apps for you.
Currently I just dismissed the update notification.
I have this phone on a stock rom and it does not have the roaming option....if I install this rom will I have the roaming option available?
panxpany said:
I have this phone on a stock rom and it does not have the roaming option....if I install this rom will I have the roaming option available?
Click to expand...
Click to collapse
What do you mean it don't have roaming?
If you are sure it's SM-J7108, then you can try to see the result. Hard to tell
Note when u enter recovery/odin mode, check carefully the model
Any Custom rom for J7108?
Burubugyot said:
Any Custom rom for J7108?
Click to expand...
Click to collapse
check this https://forum.xda-developers.com/galaxy-j7/development/rom-edge-panel-stable-rom-sm-j7108-t3604617
pm me if you have any question or request
Hi Thank You so much it works
.1
faramarzq said:
hi i have same phone when i want open samsung health or secure folder
i get this samsung heath cant opened in rooted phone but my phone is not root even i flash new rom
and for folder knox cant be created
Click to expand...
Click to collapse
Check the knox, enter download mode.
As long as 0x1 you can't use it anymore. You might as well just use nougat.

[G973F] links for official updates S10 Exynos

G973FXXU9DTJA
ODIN v3.13.3 https://drive.google.com/open?id=1aMNOVYSWMe2XGFjlP3wKE5w-TutzfYPY
FRIJA v1.3.0 https://drive.google.com/open?id=1fXmcOZvaRsEmkhfCa5rCx8FQ2Lhcrbvx​
Hello,
G973FXXU9DTJA
DBT
link:
https://drive.google.com/file/d/1qjFSOpgAAxOB_i8lQfKV6dnRuLG_AWgr/view?usp=sharing
Nothing about turn off AOD when in pocket or some notification ring as was rumored in some forums...
I'm downloading the update from samfirm at the moment and will flash it through odin. My phone's region is ROM, and the update is from AUT (Switzerland), so when flashing with odin and selecting HOME_CSC, will my phone get wiped because of the different region?
romanB_SK said:
Improved Night mode, May patches and should be more
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sammobile article : https://www.sammobile.com/2019/05/2...e-brings-improved-camera-night-mode-and-more/
Thanks for screenshot Reddit user samcex
@MoshPuiu I asked your question, will report back if I get answer :good:
Click to expand...
Click to collapse
Interesting...I have S10e with Snapdragon which has firmware from T-Mobile USA and we got May update a week ago, but this didn't include camera night mode . I hope that we get the update with June patch
Whats the best and quickest way to download it? Thanks!
Oups sorry that's for the S10+ that's why I couldn't find it. I have the regular S10
Just installed, I can confirm that the touch sound was restored to before April's update.
massacreur75010 said:
Whats the best and quickest way to download it? Thanks!
Oups sorry that's for the S10+ that's why I couldn't find it. I have the regular S10
Click to expand...
Click to collapse
It's there for the S10 too... installing now myself.
Search for samfirm and download the latest program (it still works, even though the developer claims it doesn't to draw users to their site).
Enter SM-G973F in model, and AUT in region. Check "auto" and click "check for update". Also check the "Chech CRC32" and "Decrypt automatically" to save some time.
:highfive::highfive:
---------- Post added at 11:24 AM ---------- Previous post was at 11:20 AM ----------
stefan243546 said:
I'm downloading the update from samfirm at the moment and will flash it through odin. My phone's region is ROM, and the update is from AUT (Switzerland), so when flashing with odin and selecting HOME_CSC, will my phone get wiped because of the different region?
Click to expand...
Click to collapse
Select HOME_CSC and your data will be fine, yes (as long as something doesn't go wrong during flash).
stefan243546 said:
I'm downloading the update from samfirm at the moment and will flash it through odin. My phone's region is ROM, and the update is from AUT (Switzerland), so when flashing with odin and selecting HOME_CSC, will my phone get wiped because of the different region?
Click to expand...
Click to collapse
as far as i know, if you are using HOME_CSC it won't wipe device
Anyone else experiencing problems with nova on this update? Mine has frosen a couple of times, and I need to reset nova as default launcher...
I didn't receive it yet, waiting fingers crossed
Novek said:
It's there for the S10 too... installing now myself.
Search for samfirm and download the latest program (it still works, even though the developer claims it doesn't to draw users to their site).
Enter SM-G973F in model, and AUT in region. Check "auto" and click "check for update". Also check the "Chech CRC32" and "Decrypt automatically" to save some time.
:highfive::highfive:
---------- Post added at 11:24 AM ---------- Previous post was at 11:20 AM ----------
Select HOME_CSC and your data will be fine, yes (as long as something doesn't go wrong during flash).
Click to expand...
Click to collapse
Search for samfirm where?
Edit: Lol, search on Google I figured out. But thanks it worked perfectly
hi guys!!
Tried to use Samfirm to DL the lastest firmware but i'm stucked with this message:
Error : could not send BinaryInForm. status code 200/666
Anyone know how to fix that please?
---------- Post added at 02:03 PM ---------- Previous post was at 01:57 PM ----------
Novek said:
It's there for the S10 too... installing now myself.
Search for samfirm and download the latest program (it still works, even though the developer claims it doesn't to draw users to their site).
Enter SM-G973F in model, and AUT in region. Check "auto" and click "check for update". Also check the "Chech CRC32" and "Decrypt automatically" to save some time.
:highfive::highfive:
.
Click to expand...
Click to collapse
Thats's what I did exactly , but no luck!! Got an error :
Could not send BinaryInform. status code 200/666
May update has come for Galaxy S10 Exynos in India. Here's the changelog.View attachment 4764689
Sent from my SM-G973F using Tapatalk
Novek said:
Anyone else experiencing problems with nova on this update? Mine has frosen a couple of times, and I need to reset nova as default launcher...
Click to expand...
Click to collapse
Installed the update yesterday, but I have no problems at all with Nova. Solid as a rock.
Issues for me since last update to ASE5.
I have a delay with volume buttons, sometimes they respond after 5 seconds.
Other issue, phone app. When I call someone the call begins after 5 to 10 seconds. Or when I receive a call, when I press the green button nothing happens and it responds after 5 to 10 seconds.
I tried to clear phone app cache, system cache, reboot many times and still same issues.
I updated yesterday to the ASE5 version and issues started just after the update
I live in Switzerland, Exynos S10+ 512 ceramic black, AUT unlocked version
Got the same problem here and a few others like graphic issues. The lockscreen pops up after unlock. In fullscreen apps the navigation bar pops up and switch from dark to white and sometimes transparent. This update is very awful.
@eintopf @obrad.a I see more people complaining after May update but also there is people which haven't any problems. I still waiting update for my S10 / T-Mobile so I can't share my experiences with update. All what I can suggest is clear cache in recovery, clear data/cache for each app and lastly factory reset. I know it is very annoying but sometimes can happen after update :/
Is it possible to just roll back to previous firmware the same way we updated to this one?
Novek said:
Anyone else experiencing problems with nova on this update? Mine has frosen a couple of times, and I need to reset nova as default launcher...
Click to expand...
Click to collapse
Yes. On exynos. Keep on crashing. Twitter as well some time. Gallery app, WhatsApp as well sometimes.
I haven't experienced any issues with this update yet

[BRICK] One UI update causes brick

Ok, long story short. It happened after 6months of me daily avoiding the 9.0 update on my sweet Oreo. I have accidentally pressed the INSTAL NOW button. And it happened the blue screen and update process.
It went all through the optimization of apps.
Then this screen popped up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And I don't know what to do because
1st I don't accept the fact of deleting any app data from my phone. ANY
2nd I'm not gonna stay on Android Pie nor flash anything unofficial.
Those are options I have in recorvery.
Also the code you might spot on the bottom of these screens is unknown.
HTML:
#Reboot Recovery Cause is [Binder:4880_19:6787 RecoverySystemRescueParty]# Support SINGLE-SKU
Block-Based OTA
Supported API: 3
Also a small part of logs
Can anyone guide me to dirty flashing the XEO Oreo for my European SM-G965F D/S
I believe this is latest update i want https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965F/XEO/download/G965FXXS2BRK3/248620/
Now the phone is bootlooping
@@@ I forgot to mention that i was using Swift Installer to mod apps and system UI to dark oled. When i pressed update if ****ed up. Logs point at it.
Please tell me what to do. I cant lose my apps data.
Try with full firmware for your CSC and latest Odin. Chose HOME CSC file when selecting files for flash so you can try to keep all your personal file without wiping!
zoljac said:
Try with full firmware for your CSC and latest Odin. Chose HOME CSC file when selecting files for flash so you can try to keep all your personal file without wiping!
Click to expand...
Click to collapse
Thank you very much for your reply.
So I'm right to use OREO to do dirty flash as it should work with swift installer mods that could be replaced by Pie update due to mishmash or something.
I'll try after I get a reply from Swift Installer team. As it must be it since no one had a simillar problem.
I have lots of odins form XDA but i guess this is legit sitehttps://odindownload.com/download/
Meanwhile, if it fails, does anybody know the best way to pull all possible apps with full data and cache?
I used this multifile FW (DBT) Germany
https://updato.com/firmware-archive...965F&rpp=15&r=DBT&order=date&dir=desc&exact=1
and this ODIN
https://dl2018.sammobile.com/Odin3-v3.13.3.zip
---------- Post added at 09:44 AM ---------- Previous post was at 09:41 AM ----------
1. Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
2. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
3. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP than USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
4. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
5. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
6. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
zoljac said:
I used this multifile FW (DBT) Germany
https://updato.com/firmware-archive...965F&rpp=15&r=DBT&order=date&dir=desc&exact=1
and this ODIN
https://dl2018.sammobile.com/Odin3-v3.13.3.zip
---------- Post added at 09:44 AM ---------- Previous post was at 09:41 AM ----------
1. Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
2. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
3. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP than USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
4. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
5. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
6. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
Click to expand...
Click to collapse
Flashed as you said but with this oreo https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G965F/XEO/download/G965FXXS2BRK3/248620/
as you haven't linked specific, firmware.
Now he's in a permanent boot loop. Samsung logo is blinking for a few minutes, then it says that he optimizing 115 apps (1st one was longer) after its done its starts all over again. Nearly hour has passed.
I cannot enter stock recovery, he doesn't respond at all. Download mode is working ... but all I can do now is leave him till the battery dies and burn my pixels entirely in Samsung logo place.
I also tried all recovery programs that pull apps and data but none works for sgs9
After 5h battery finally died. If you have any ideas ill be waiting
Try to flash the last Pie firmware for your device? You can use [Tool] Frija - Samsung firmware downloader/checker instead of SamMobile because it's much faster. Also, I will recommend doing full wipe or just to use the CSC the will wipe everything.
I think this happened because you didn't uninstall on the first places the mods you had - Swift Installer in your case, but the same applies to Substratum. Swift Team also recommends to delete, there is even adb script, every layer that you have installed, before doing OTA update, because may bootloop your device or in your case even brick it.
Leon said:
Try to flash the last Pie firmware for your device? You can use [Tool] Frija - Samsung firmware downloader/checker instead of SamMobile because it's much faster. Also, I will recommend doing full wipe or just to use the CSC the will wipe everything.
I think this happened because you didn't uninstall on the first places the mods you had - Swift Installer in your case, but the same applies to Substratum. Swift Team also recommends to delete, there is even adb script, every layer that you have installed, before doing OTA update, because may bootloop your device or in your case even brick it.
Click to expand...
Click to collapse
Its exactly what you said. The Swift Mods have interrupted the Pie update.
I tried with oreo but now I'll try the Pie ... i can't think of deleting all my data :crying:
Not sure if you can restore from google account some information or Samsung cloud.
I have the same exact problem and I had hope to solve it. But neither flashing Oreo or Pie helps. It bootloops.
I want to access data stored in Android/data or just backup apps. Did I tick something wrong or should i flash custom recovery.
i have the same problem
I think there is no data keeping and retrieving of those back in your case!
Full clean flash should work, sorry for this answer!
zoljac said:
I think there is no data keeping and retrieving of those back in your case!
Full clean flash should work, sorry for this answer!
Click to expand...
Click to collapse
I've done it, but now my phone can't see any backup from Google, while it is exist on GDrive.

[ROM][crDroid6.4][Q]For Lenovo Z5Pro GT

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP(Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
step 1 Unlock the BootLoader
step 2 flash into the TWRP
step 3 Decrypt data,double clear
step 4 format data
step 5 flash into crDroid
Update installation:
step 1 Enter the TWRP
step 2 Clear the cache
step 3 flash in the new crDroid
Sources:
ROM:https://github.com/crdroidandroid
Vendor:vendor url
Device:device url
Kernel:kernel url
Thanks a lot for HighwayStar's open source [email protected]_ru
Download:
ROMDownload from here
Changelog:Here to see
Known issues:
1.If you turn on ok Google, the microphone may not work. It is recommended that you turn it off
2. On first start there is no ringtone and notification sound set, please set in Setting -> Sound
3. The rounded corners of the default status bar are partly blocked. You can set a custom corner to modify the rounded corners
4.I only found these issues for the moment.For more details, Please flash the Rom to experience them.Please get in touch with me if you found any bug(bring with the bug log the best).This Rom is able for daily uses.
ROM OS Version: Android 10
ROM Kernel: Linux 4.14
ROM Firmware Required: ZUI 11.5.141--Q
Visit official website @ crDroid.net
crDroid heart Telegram
crDroid Community Telegram
:good:
I guess this needs to be here
xivilaimax said:
I guess this needs to be here
Click to expand...
Click to collapse
Oh, friend, I don't have permission yet
Please compile RevengeOs.
Amazing post. Thanks a lot.
Edit: SElinux is in Enforcing or Pemissive?
obrigado pelo seu trabalho muito bom.
IT IS OFFICIAL NOW, available at CrDroid official website. First official rom to Z5 Pro GT.
Will the updates be available by OTA??
Please edit the post with [OFFICIAL][OTA].
Can You fix TWRP link? Mega says that decipher key is incorrect. Or just share information about used TWRP.
gugax10 said:
IT IS OFFICIAL NOW, available at CrDroid official website. First official rom to Z5 Pro GT.
Will the updates be available by OTA??
Please edit the post with [OFFICIAL][OTA].
Click to expand...
Click to collapse
ok,OTA updates will be provided
Guziec94 said:
Can You fix TWRP link? Mega says that decipher key is incorrect. Or just share information about used TWRP.
Click to expand...
Click to collapse
thank you, I'll fix it
gugax10 said:
Amazing post. Thanks a lot.
Edit: SElinux is in Enforcing or Pemissive?
Click to expand...
Click to collapse
It shouldn't be mandatory
Permissive SELinux
ZhouYu2003 said:
gugax10 said:
Amazing post. Thanks a lot.
Edit: SElinux is in Enforcing or Pemissive?
Click to expand...
Click to collapse
It shouldn't be mandatory
Click to expand...
Click to collapse
I installed this rom today and SELinux is set to permissive mode and I can't change it.
Guziec94 said:
I installed this rom today and SELinux is set to permissive mode and I can't change it.
Click to expand...
Click to collapse
Is it fast and stable for daily users?
It's very similar to LineageOs and have the same issues, but yes, it is stable enough to use it for daily users.
I don't know if NFC payments are working fine, because I can't pass SafetyNet test so my bank blocked payments for my phone. I didn't have this kind of problems on LineageOs.
CrDroid has second issue - screen won't wake after notification (even if pocket mode in settings is unchecked). If you slide down phone then display will be properly waken. You can use Glimpse Notification to wake screen, but then edge lightning isn't working.
I'm having some issues with fingerprint, but probably it's caused by screen protector.
Oh, and probably there is an issue with notification light. It won't blink, it lights ups after notification and stops after waking screen.
Streaming music via BT is working fine (in other roms there are some issues). Slider functions (i.e. answer phone), camera, lte, wifi, etc. works too.
For now I only find above issues.
Guziec94 said:
I'm having some issues with fingerprint.
Click to expand...
Click to collapse
For the scanner to work well, you need to select in the "crDroid settings" -> "Lock screen" under "Behavior of the FOD when pressed" -> "Solid color". and enable fingerprint animation.
---------- Post added at 09:07 PM ---------- Previous post was at 08:58 PM ----------
I want to notice such an unpleasant thing: At the first start, if the SIM card has a PIN code, it asks for it - but writes that it is incorrect, even if I enter the correct PIN code. I had to remove the pin code and reinstall it using the PUK code.
The default color profile is P3-7200. It very oversaturated the screen, colors become unnatural. To make them normal, go to Settings -> Screen Settings -> Live Display -> Color Profile -> sRGB-7300.
OTA updates are not installed automatically. After a reboot, TWRP gives an error: Error installing zip file: '@ / cache / recovery / block.map'. I had to export the update and install it manually.
---------- Post added at 09:12 PM ---------- Previous post was at 09:07 PM ----------
And another thing: unlike ZUI, fast charging using the Power Delivery protocol (Type-C to Type-C) does not work here on this ROM. For some reason, when Quick Charge3.0 charger is connected, it shows that fast charging is not turned on, but the smartphone says about 36W fast charging. This is strange.
Guziec94 said:
It's very similar to LineageOs and have the same issues, but yes, it is stable enough to use it for daily users.
I don't know if NFC payments are working fine, because I can't pass SafetyNet test so my bank blocked payments for my phone. I didn't have this kind of problems on LineageOs.
CrDroid has second issue - screen won't wake after notification (even if pocket mode in settings is unchecked). If you slide down phone then display will be properly waken. You can use Glimpse Notification to wake screen, but then edge lightning isn't working.
I'm having some issues with fingerprint, but probably it's caused by screen protector.
Oh, and probably there is an issue with notification light. It won't blink, it lights ups after notification and stops after waking screen.
Streaming music via BT is working fine (in other roms there are some issues). Slider functions (i.e. answer phone), camera, lte, wifi, etc. works too.
For now I only find above issues.
Click to expand...
Click to collapse
Thanks for your feedback:good:
Hola.
Se puede arreglar despertar la pantalla con doble click?, no funciona.
Gracias
Hi. Can you fix waking the screen with double click ?, it doesn't work. Thank you
Jonbollu said:
Can you fix waking the screen with double click ?, it doesn't work.
Click to expand...
Click to collapse
I think it should work when You disable Pocket Mode in settings. Give it a try.
It's connected with proximity sensor, if You slide phone down and then double tap screen should wake up (because proximity sensor won't be covered by anything). Disabling pocket mode just "skips" checking proximity sensor, but it's only workaround.
Hi.
Me and some other users find some trouble, not only on that rom but Lineage also – in any Gcam version or stock cam main screen show soapy photo like image comes from second camera lens. When photo is taken – result looks fine.
But if i make a video and make a crop result still look bad.
Any ideas? Maybe the best solution to block useless second camera lens?

Categories

Resources