Hi,
I rooted my Samsung Galaxy Grand Prime g530h.
Everything worked ok for about a day, but now the phone keeps restarting by itself after a minute or two of being turned on.
If I try to power off or reset, it keeps taking me to the Android System recovery menu.
I have to select "reboot system now". I did try "reboot to loader" but it just hung.
it also says the phone is in # Manual Mode#
Can someone please help me out on how to fix this?
Related
Hi guys,
little bit of background on the phone, had it since new close to 2 years away (2 year contract and im 7weeks from an upgrade) the phone is on orange (well EE now)
Basically when I turn my phone on it is stuck in a force close loop, with loads of different messages appearing, such as;
(process com.sec.android.provider.logsprovider)
calenders, messaging etc etc
So I have tried going into the boot mode, by pressing volume up, home screen and the power button.
Then when I try to reboot it comes up with the error messages;
e:error in /data/log/recovery_log.txt (read-only file system)
(read-only file system)
e:copy_kernel_file :: Can't Open /data/log/recovery_kernel_log.txt
Rebooting...
It then just continues onto the normal home screen, then when I enter my swipe code it comes up with the force close loop again.
Any solutions to this problem, Or will I have to factory restore, or is completly broken? Im not due an upgrade for about 7weeks either
Would rather not have to factory restore if possible as I have some files on there I dont want to loose, but if its unhelpable so be it
Thanks in advance guys!
Cheeky little bump, Anyone know a fix to this?
Have similar problem...
I believe a factory reset will fix it...sorry to hear you losing files though..
I have a similar problem. I should probably make a new thread for this though...
Background: Samsung Galaxy SII 1900 bought October 2011. Yesterday flashed a stock ROM for the phone and everything was working perfectly. This is probably not related but have been trying to install a working version of Android Keyboard which has gesture typing working for other languages than English, German, Spanish and French and so some hours before this happened I tried to flash a zip with that but it turned up "e: signature verification failed" so I pretty much gave it up and the phone was still working. Then I decided to install another recovery mode on the phone cause that should allow me to install without verification. So I downloaded the one for SGS2 at clockworkmod com rommanager and put it in on the SD card. Then I shut down the phone and this is the weird part: First I accidentally pressed the power button first so I realised the phone was gonna boot normall so I pressed the power button again to force shut it down. I pressed for quite a long time and then it just restarted and I'm at a boot loop where it says Samsung Galaxy S II with white text on black background.... Then suddenly after removing the battery and trying start several times it booted normally. So I just continued where I left off going to make a backup in Titanium Backup before flashing CWM and suddenly the phone just restarted and I got into the boot loop again. I am able to enter Download mode and Recovery mode but the phone no longer starts. Been trying like 30 times to restart it... Now when I entered Recovery mode just now I got the error message
"E:Error in /data/recovery_kernel_log.txt(Read-only file system)" in red letters... and that's where I'm at now.
Here's a sitty picture of it from my HP Chromebook webcam ******* (Google Drive) Edit: Not allowed to post links in first 10 posts
Hello,
I have a big problem with the I9300 from my mother-of-law.
Her Galaxy is neither modified, nor rooted or anything. So it's stilll stock.
Now her I9300 won't boot correctly anymore.
When she starts it, it lasts much longer than normal to boot. When unlocking, an error message pops up immediately "Application Installer stopped" (angehalten), when clicking ok, it comes another time then it reboots completely.
When going into "Android system recovery" and wiping data/factory reset, there still comes an error message when I reboot (error) and the same procedure appears.
> It lasts a long time to boot > after unlocking the error message appears (Application installer stopped and it reboots immediately).
Does anyone have an idea what the issue might be and what I could do?
Flash a new Rom?
(P.S. sometimes it doesn't start at all an just shuts down and the battery is empty - even though it was still 77%).
Edit:
Sorry, I made a data / f factory reset another time and now it finally seems to work, unfortunately with all datas erased..
You should flash newest firmware for your country via Odin and it should work correctly
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
same problem
axiom913 said:
so it goes like this .. I had a problem with my z90a40 as I was trying to fix a problem with network services(phone was able to recognize the sim but there was no service).. first I did a factory reset- didn't work, then I entered the boot menu again and wiped user data, then I choose "restore QCN backup" option , after that I rebooted, phone entered this initializing statues and after 2 seconds it rebooted(doesn't even finish the initializing, actually it only ticks at maybe less than 5% and then reboot) , and kept doing that, after this, I could no longer enter the boot menu ... I tried everything, ADB or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .. what should I do now ?
thanks in advance & sorry for bad English
Click to expand...
Click to collapse
1st was the network data, tried reset and then CQN restore on black menu. now just keep on rebooting with lenovo logo initializing at 2-5% then loop restart again...
now cannot access the black menu (vol down + power)
stuck on rebooting phone any fix?
Hello. I have a problem with my phone. I forgot to delete root and decided to click the wireless update provided in the phones settings. While rebooting in this process the phone has become stuck on the 'no command' screen and then times out and repeats in a loop. I have managed to enter the recovery stage and try several of the options on this screen but with no success.
Something very much the same just happend to my HT17 Pro with non-rooted stock ROM and regular suggested update. It is stuck in on and off "HOMTOM" logo and trying to boot into recovery end in "no command"...
just pres power + vol up one time. worked for me!
I restarted my phone (huawei mate 10 lite) because it was lagging, and suddenly I get greeted with a screen that says "system install failed" and a "reboot system now" button, but clicking it restarts the phone and gets me into the same screen again, I somehow managed to get the phone to safe mode but restarted it again (I thought that restarting from safe mode might fix my issue) but now I can't manage to boot it into safe mode again, and I'm stuck in this loophole, can anybody help me fix this without losing my data, and thanks!