This is my first time trying to flash a custom rom to one of my devices. Using an online tutorial I rooted my phone and I changed my custom recovery to twrp. Well when I tried to backup my data I got a message saying unable to unmount system. Does anyone know how i can get rid of this messege so i can flash the rom?
PrtJester said:
This is my first time trying to flash a custom rom to one of my devices. Using an online tutorial I rooted my phone and I changed my custom recovery to twrp. Well when I tried to backup my data I got a message saying unable to unmount system. Does anyone know how i can get rid of this messege so i can flash the rom?
Click to expand...
Click to collapse
Exclude bootloader partition while backing up, good to go. And also, once everything's going right just wipe from twrp & flash firmware, Rom & gapps, Reboot!
sachin n said:
Exclude bootloader partition while backing up, good to go. And also, once everything's going right just wipe from twrp & flash firmware, Rom & gapps, Reboot!
Click to expand...
Click to collapse
so what you mean is that i should only backup system and data? As i mentioned i am pretty new to this so i do not know most of the phrases that are used in the xda developers forums
PrtJester said:
so what you mean is that i should only backup system and data? As i mentioned i am pretty new to this so i do not know most of the phrases that are used in the xda developers forums
Click to expand...
Click to collapse
Yup, Just backup system, data & boot. Way to go!
sachin n said:
Yup, Just backup system, data & boot. Way to go!
Click to expand...
Click to collapse
i did just that and i got an error message saying Failed to unmount ' /system' (Device or resource busy)
PrtJester said:
i did just that and i got an error message saying Failed to unmount ' /system' (Device or resource busy)
Click to expand...
Click to collapse
Ahhh, Deym!
Anyway, backup / restore is still buggy on mido!
Why you wanna take nandroid? Just wipe everything and flash cm14.1 firmware first, then custom rom & gapps, reboot!
You can easily flash Miui using TWRP if you don't like custom Roms!
sachin n said:
Ahhh, Deym!
Anyway, backup / restore is still buggy on mido!
Why you wanna take nandroid? Just wipe everything and flash cm14.1 firmware first, then custom rom & gapps, reboot!
You can easily flash Miui using TWRP if you don't like custom Roms!
Click to expand...
Click to collapse
well i wanted to backup in case something went wrong. do you think i should backup my data another way? is it even safe to just attempt to wipe everything?
PrtJester said:
well i wanted to backup in case something went wrong. do you think i should backup my data another way? is it even safe to just attempt to wipe everything?
Click to expand...
Click to collapse
Yep, taking a nandroid backup is just incase! :silly:
But since TWRP for Mido has bugs in this part, I'd just skipped that step and i dont wanna see Miui again
Just wipe, flash cm14.1 firmware, custom Rom & Gapps! WAYYYYY TO GOOOOOO! Good luck
sachin n said:
Yep, taking a nandroid backup is just incase! :silly:
But since TWRP for Mido has bugs in this part, I'd just skipped that step and i dont wanna see Miui again
Just wipe, flash cm14.1 firmware, custom Rom & Gapps! WAYYYYY TO GOOOOOO! Good luck
Click to expand...
Click to collapse
i want to flash the resurrection remix rom. do i still have to flash cm14.1 firmware for that? isn't cm for cyanogenmod?
PrtJester said:
i want to flash the resurrection remix rom. do i still have to flash cm14.1 firmware for that? isn't cm for cyanogenmod?
Click to expand...
Click to collapse
Nah, it depends!
If you're coming from Android 6X based MIUI then you need to flash cm14.1 firmware, if you're jumping from Android Nougat based MIUI then there's no need of firmware.
sachin n said:
Exclude bootloader partition while backing up, good to go. And also, once everything's going right just wipe from twrp & flash firmware, Rom & gapps, Reboot!
Click to expand...
Click to collapse
i will flash it just in case. thanks for your help.
PrtJester said:
i will flash it just in case. thanks for your help.
Click to expand...
Click to collapse
Yep, flash it.
Good luck! ?
sachin n said:
Yep, flash it.
Good luck!
Click to expand...
Click to collapse
guess who is back? after finally downloading everything i needed i go into twrp recovery. i wiped my data flashed the firmware then attempted to install the rom and i got another error message. it says
E: unknown command [log]
Updater process ended with ERROR: 7
Error installing zip file ' /external_sd/ download/RR-N-v5.8.3-20170611-kenzo-nightly.zip
i require your assistance once more
PrtJester said:
guess who is back? after finally downloading everything i needed i go into twrp recovery. i wiped my data flashed the firmware then attempted to install the rom and i got another error message. it says
E: unknown command [log]
Updater process ended with ERROR: 7
Error installing zip file ' /external_sd/ download/RR-N-v5.8.3-20170611-kenzo-nightly.zip
i require your assistance once more
Click to expand...
Click to collapse
Gaawd! NOO!
Why did you flash Kenzo [Redmi note 3 pro] Rom on our Mido? xD
DL & Flash this :- https://www.androidfilehost.com/?fid=817550096634776307
Steps :-
*.Boot back to twrp
*.Wipe everything
*.Flash firmware
*.Flash Rom
*.Flash Gapps
*.Reboot!
sachin n said:
Gaawd! NOO!
Why did you flash Kenzo [Redmi note 3 pro] Rom on our Mido? xD
DL & Flash this :- https://www.androidfilehost.com/?fid=817550096634776307
Steps :-
*.Boot back to twrp
*.Wipe everything
*.Flash firmware
*.Flash Rom
*.Flash Gapps
*.Reboot!
Click to expand...
Click to collapse
i found it in a video xD i will attempt to flash this one and i will inform you. you are doing gods work my man xD
PrtJester said:
i found it in a video xD i will attempt to flash this one and i will inform you. you are doing gods work my man xD
Click to expand...
Click to collapse
Good luck! I bet this will works :3
And no! I iz noob! :silly: xD
sachin n said:
Good luck! I bet this will works :3
And no! I iz noob! :silly: xD
Click to expand...
Click to collapse
btw i am not using advanced wipe? should i use that?
PrtJester said:
btw i am not using advanced wipe? should i use that?
Click to expand...
Click to collapse
Do it, advanced wipe > choose system, data, cache / dalvik to wipe > swipe to confirm > now back to the twrp menu > flash firmware > Rom > Gapps, REBOOOOOOT!!
sachin n said:
Do it, advanced wipe > choose system, data, cache / dalvik to wipe > swipe to confirm > now back to the twrp menu > flash firmware > Rom > Gapps, REBOOOOOOT!!
Click to expand...
Click to collapse
i got the same error i did as you told me. i advanced wiped flash firmware again then attempted to install the new rom and still got the same thing
PrtJester said:
i got the same error i did as you told me. i advanced wiped flash firmware again then attempted to install the new rom and still got the same thing
Click to expand...
Click to collapse
What? you have a Snapdragon Redmi note 4/4X, right?
Can you post the pic of error? I'll see, fast!
Related
This is a flashable Stock 14.1.B.1.510 Taiwan rom. It is Deodexed and rooted. Install it in CWM. You can use this as a base for your rom. No need to ask. Share it and modify it and lets start some custom roms.
Download
It is great to be the first reply
Great Job
Really good news...
Sent from my C6802 using Tapatalk 2
m3dd0g said:
This is a flashable Stock 14.1.B.1.510 Taiwan rom. It is Deodexed and rooted. Install it in CWM. You can use this as a base for your rom. No need to ask. Share it and modify it and lets start some custom roms.Download
Click to expand...
Click to collapse
Thanks. Tell and how to receive the worker CWM Recovery?
Feodorus 4PDA said:
Thanks. Tell and how to receive the worker CWM Recovery?
Click to expand...
Click to collapse
First unlock your bootloader then flash via fastboot this kernel. When booting press volume up and you are in recovery.
m3dd0g said:
First unlock your bootloader then flash via fastboot this kernel. When booting press volume up and you are in recovery.
Click to expand...
Click to collapse
It's OK, thanks. I thought for Locked Bootloader.
Feodorus 4PDA said:
It's OK, thanks. I thought for Locked Bootloader.
Click to expand...
Click to collapse
the main problem is lockbootloader
thank you m3dd0g !!!
start a revolution for Rom Cook
can i flash 475 HK ?
Will it wipe DATA and/or Internal Storage ?
I tried to flash, but the program said "waiting for device".
What does this mean, I don't have unlock bootloader? or I'm on 475?
satawat.thongsawat said:
I tried to flash, but the program said "waiting for device".
What does this mean, I don't have unlock bootloader? or I'm on 475?
Click to expand...
Click to collapse
yes you need to have unlocked bootloader ( make sure you backup TA before unlocking ) then flash this recovery and flash the rom in cwm.
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
hey mate, tried flashing the rom via krabappel2548's kernel.. in twrp it gives an error of updater binary and it flashes fine in cwm. booting now thanks!
m3dd0g said:
First unlock your bootloader then flash via fastboot this kernel. When booting press volume up and you are in recovery.
Click to expand...
Click to collapse
Thanks for cookrom first ZU
GOF007 said:
Will it wipe DATA and/or Internal Storage ?
Click to expand...
Click to collapse
it will wipe system only. just do a wipe fty reset, wipe cache and dalvik. i did /data too.. and flash the rom.
no need to wipe internal sdcard and the rom will not wipe internal data
androidindian said:
it will wipe system only. just do a wipe fty reset, wipe cache and dalvik. i did /data too.. and flash the rom.
no need to wipe internal sdcard and the rom will not wipe internal data
Click to expand...
Click to collapse
I have just finished flash, all 16Gb of data in sdcard are lost in the clean , of course ex_sdcard not deleted
big said:
I have just finished flash, all 16Gb of data in sdcard are lost in the clean , of course ex_sdcard not deleted
Click to expand...
Click to collapse
Impossible.. I've flashed the rom a few times and it does not wipe data on sdcard.. Did you do it manually in recovery?
Sent from my HTC One using XDA Premium 4 mobile app
I have a rom ready but devdb gives server error.. I'll post it asap
Sent from my C6603 using xda app-developers app
In CWM the external SD isn't found and in TWRP I can't flash any rom, flashing fails right at the beginning, it starts format system and then it says, E: error executing udater binary in zip '/exter... the rest in this row isn't readable
error flashing zip '/external_sd/rom/stock_ C68
updating partition details
Mucho79 said:
In CWM the external SD isn't found and in TWRP I can't flash any rom, flashing fails right at the beginning, it starts format system and then it says, E: error executing udater binary in zip '/exter... the rest in this row isn't readable
error flashing zip '/external_sd/rom/stock_ C68
updating partition details
Click to expand...
Click to collapse
Twrp has issues for now.. Use Cwm.. Put the file inside your internal storage.. Go to install.. Select 0..zip file.. Flash away
Sent from my HTC One using XDA Premium 4 mobile app
Hello
Im bored by using android 4.2 from many years, i want something new in my device
im tired of finding how to install cyanogen in lenovo A680
i dont know from where i can get working stock ROM of Lenovo A680
and i dont know how can i port rom perfectly
i hope you can help me !
Hi
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
maxnuk said:
For install ROM anywere(cyanogen/MIU/Stock):
Put the firmware(ROM.zip) archive to SD-card,
Switch off your phone
get into recovery (You need to CWM: forum.xda-developers. com/android/general/rooting-twrp-cwm-lenovo-a680-row-t3036490 ):
- Go to the backup and restore, create a backup of the current state of your machine,
- Wipe Data / Factory Reset -> delete all user data
- Wipe Cache Partition -> Wipe cache
- Advanced -> Wipe Dalvik Cache -> Wipe Dalvik Cache
Next Install zip from sdcard -> choose zip from sdcard -> Select the firmware and install and reboot.
OR: Install Stock Rom and put ROOT for unistall apps system, and install Theme/Xposed Modules.
Click to expand...
Click to collapse
Thanks for those step by step answer.!
sure i will follow your step when i will install ROM
oh well, can you tell me from where i can get Cyanogen for Lenovo A680 ?
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
maxnuk said:
Do you test: youtu.be/RyVakGPT11I
but I'm not sure...(Backup!)
Click to expand...
Click to collapse
Thanks for your help
but according to comments, it seems fake rom ,full of bugs! better I Should not try
hey can you tell me how can I port rom and make it compatible with my device?
I'm interested into cyanogen ,I already downloaded both cyanogen 12.1 and 13
I want to make it compatible with my device
I'll be thankful to you
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Ideally you get a ready-rom, like the settings of your device and change.
maxnuk said:
Port rom... you have very bugs. But, to port rom: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Click to expand...
Click to collapse
I'm Sorry if I bother you
wow your answer is Really so awesome
im going to read all the contents!
Thanks Really!
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
maxnuk said:
Your specs: Chipset:Mediatek MT6582 // GPU: Mali-400MP2 // 4 GB Rom, 1 GB RAM.
Try: http://www.mtkroms.com/2016/02/marshmallow-cyanogenmod-13-for-mt6582.html
Click to expand...
Click to collapse
you are the boss!
Really your answer is interesting
soon I'll be downloading it
but I afraid little bit, Because just 2 day ago I tried to flash custom rom and it stuck at booting logo
I was unable to boot into recovery too
then I give it to service center, and then my device working today
XD You need not have gone ... Boot loop, that always happens..
maxnuk said:
XD You need not have gone ... Boot loop, that always happens..
Click to expand...
Click to collapse
Haha Thanks dude...hey do you know how can I flash custom rom in computer? using emulators?
so that I can test whether rom is working Fine or not, so that I can avoid risk on my device
Do you have skype ?
maxnuk said:
Do you have skype ?
Click to expand...
Click to collapse
yes I've
Do you use Smart Phone Flash tool ?
maxnuk said:
Do you use Smart Phone Flash tool ?
Click to expand...
Click to collapse
I know how to use it, but I didn't used,Because last time I tried to flash rom using TWRP
you know What was Good wrong?
I did wipe cache and data, after that, I tried to install custom rom zip, and I found it's corrupted!
so, I ended up with bricking my device
that's why I want to flash rom in computer first!! Haha
when you bricked your phone, you could not get into TWRP ?
maxnuk said:
when you bricked your phone, you could not get into TWRP ?
Click to expand...
Click to collapse
yes right!! and even I was unable to get into recovery mode using key combination
just use that Smart Phone Flash tool..
maxnuk said:
just use that Smart Phone Flash tool..
Click to expand...
Click to collapse
Oh Thanks for that.. sure I'll use it next time...but still I afraid of bricking! do you have any idea how can I flash custom rom in computer emulator? so I can make sure rom is working Fine or not
I do not know. I recommend you not flash rom.
Hello guys, i have a problem, i tried to install RR 5.7.4 via TWRP ZCX, but the first boot asks me for a password
PS: I tried flashing RR while i was in MIUI 8 global stable
Factory reset in TWRP.
using TWRP filemanager go to /data/system
Delete all .key files and also delete locksettings.db file.
Reboot enjoy
Guys, my TWRP ZCX crashed, it is stuck on its logo
theoneofgod said:
Factory reset in TWRP.
Click to expand...
Click to collapse
HI, I am also facing same issue. For every boot I am being asked to draw the pattern. Factory reset in TWRP will not effect my current rom and data stuff ????
[email protected] said:
HI, I am also facing same issue. For every boot I am being asked to draw the pattern. Factory reset in TWRP will not effect my current rom and data stuff ????
Click to expand...
Click to collapse
Yes it will.
Do what's said here https://forum.xda-developers.com/showpost.php?p=70354200&postcount=3
theoneofgod said:
Yes it will.
Do what's said here https://forum.xda-developers.com/showpost.php?p=70354200&postcount=3
Click to expand...
Click to collapse
Thanks for the info
Can you explain what is this feature? because I didn't get this when i am in miui 8. But as soon as I flashed ZCX TWRP and installed RR I started getting this. Thanks in Advance
[email protected] said:
Thanks for the info
Can you explain what is this feature? because I didn't get this when i am in miui 8. But as soon as I flashed ZCX TWRP and installed RR I started getting this. Thanks in Advance
Click to expand...
Click to collapse
What he suggested will delete the lockscreen password/passcode etc so you can boot the phone without any prompts. You do this within TWRP.
theoneofgod said:
What he suggested will delete the lockscreen password/passcode etc so you can boot the phone without any prompts. You do this within TWRP.
Click to expand...
Click to collapse
Many thanks guys..You are quite supportive :angel:
[email protected] said:
Thanks for the info
Can you explain what is this feature? because I didn't get this when i am in miui 8. But as soon as I flashed ZCX TWRP and installed RR I started getting this. Thanks in Advance
Click to expand...
Click to collapse
this is because force encryption of internal storage. do a factory reset in twrp after flashing lazy flasher. and if its stuck on twrp boot logo thn u have to flash latest fastboot dev rom through miflash. thn unlock bootloader thn flash twrp thn flash lazy flasher thn factry reset. .
hope it helps
smustafasms said:
this is because force encryption of internal storage. do a factory reset in twrp after flashing lazy flasher. and if its stuck on twrp boot logo thn u have to flash latest fastboot dev rom through miflash. thn unlock bootloader thn flash twrp thn flash lazy flasher thn factry reset. .
hope it helps
Click to expand...
Click to collapse
oh in that case, should I have to factory reset everytime I flash a rom through my TWRP? I use ZCX TWRP, so Lazy flasher is not required after rom flashing right?
you just need it once . to decrypt your storage
[email protected] said:
oh in that case, should I have to factory reset everytime I flash a rom through my TWRP? I use ZCX TWRP, so Lazy flasher is not required after rom flashing right?
Click to expand...
Click to collapse
In the information about the ZCX TWRP I found below:
ZCX TWRP : http://forum.xda-developers.com/redm...persu-t3462448
- Based on official TWRP 3.0.2-0
- Patches boot.img automatically (Removes dm-verity flag)
- Disables forced encryption
Should I have to tweak anything in TWRP settings to remove this dm-verify flag everytime?
[email protected] said:
In the information about the ZCX TWRP I found below:
ZCX TWRP : http://forum.xda-developers.com/redm...persu-t3462448
- Based on official TWRP 3.0.2-0
- Patches boot.img automatically (Removes dm-verity flag)
- Disables forced encryption
Should I have to tweak anything in TWRP settings to remove this dm-verify flag everytime?
Click to expand...
Click to collapse
no ,but you should flash lazy flasher once . to decrypt ur internal storage. dm-verity flag does nothing to decrypt storage
smustafasms said:
no ,but you should flash lazy flasher once . to decrypt ur internal storage. dm-verity flag does nothing to decrypt storage
Click to expand...
Click to collapse
Thank you very much :angel:
gulshanstrider said:
using TWRP filemanager go to /data/system
Delete all .key files and also delete locksettings.db file.
Reboot enjoy
Click to expand...
Click to collapse
I tried it. Earlier i did not have any issue even if i install custom rom on my Redmi note 3. But today i thought of trying Pure Nexus *Substratum* rom. And on the first boot it asked me to enter password. though i have never kept password for my mobile, i tried all the passwords that i remember, which didnt solve my issue. then saw ur reply and tried it, and still it didnt work for me. Any other way?:crying:
AnilLonely said:
I tried it. Earlier i did not have any issue even if i install custom rom on my Redmi note 3. But today i thought of trying Pure Nexus *Substratum* rom. And on the first boot it asked me to enter password. though i have never kept password for my mobile, i tried all the passwords that i remember, which didnt solve my issue. then saw ur reply and tried it, and still it didnt work for me. Any other way?:crying:
Click to expand...
Click to collapse
Are you coming from MIUI? If so then MIUI encrypts the data partition, hence the new ROM asking for a password.
Before you install the ROM, you must "format data" on wipe in TWRP, this is different from wipe data.
Note that this will delete all your data obviously.
kimxk said:
Are you coming from MIUI? If so then MIUI encrypts the data partition, hence the new ROM asking for a password.
Before you install the ROM, you must "format data" on wipe in TWRP, this is different from wipe data.
Note that this will delete all your data obviously.
Click to expand...
Click to collapse
Yes i am coming from MIUI. I had done that But no use. Tried what ever that has been discussed in the following thread as well, but that also did not work for me.
http://en.miui.com/thread-324522-1-1.html
Posted a thread on MIUI forum as well. Waiting for some sort of help. Earlier i was able to install Custom Rom's without any issue, (though i am coming from MIUI), but now what ever may be the rom that i am trying to flash, the first boot is asking me for password. Unable to understand what is the issue.
AnilLonely said:
Yes i am coming from MIUI. I had done that But no use. Tried what ever that has been discussed in the following thread as well, but that also did not work for me.
http://en.miui.com/thread-324522-1-1.html
Posted a thread on MIUI forum as well. Waiting for some sort of help. Earlier i was able to install Custom Rom's without any issue, (though i am coming from MIUI), but now what ever may be the rom that i am trying to flash, the first boot is asking me for password. Unable to understand what is the issue.
Click to expand...
Click to collapse
Are you sure that you used "format data"?
Wipe data doesn't remove the encryption.
See this page for an image:
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
kimxk said:
Are you sure that you used "format data"?
Wipe data doesn't remove the encryption.
See this page for an image:
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
Click to expand...
Click to collapse
Perfect. Worked bro. Thanks a lot for the help. I was wiping cache,and internal storage. Now only came to know this. :highfive:
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
awais_666 said:
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Click to expand...
Click to collapse
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
thank you for a quick reply yes i am able to go into twrp and i did format system data cache dalvik and internal storage and after wipe did format too but still stuck at same issue and when i open the internal storage in my computer it shows only 9gb storage
MyNameIsRage said:
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
Click to expand...
Click to collapse
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
awais_666 said:
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
Click to expand...
Click to collapse
you mean the global rom? yes the one you downloaded from en.miui.com
MyNameIsRage said:
you mean the global rom? yes the one you downloaded from en.miui.com
Click to expand...
Click to collapse
yes thats the one downloading now thank you guys for quick response ill update once done
@MyNameIsRage thank you for correcting me.
Yes. Please do flash MIUI and lazy first. Looks like you messed up your partitions.
Peace.
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
awais_666 said:
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
Click to expand...
Click to collapse
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
ArK96 said:
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
Click to expand...
Click to collapse
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
awais_666 said:
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
Click to expand...
Click to collapse
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
ArK96 said:
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
Click to expand...
Click to collapse
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
awais_666 said:
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
Click to expand...
Click to collapse
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
ArK96 said:
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
Click to expand...
Click to collapse
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
awais_666 said:
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
Click to expand...
Click to collapse
Good job mate.
Hello, guys,
i unlocked my Bootloader properly, i flashed a ROM, i flashed all ROMs but the phone function is gone, no Audio Sound, no FP working!!! I dont know what to do, could someone teach me how to get my phone working again?
Did you flash xiaomi.eu pie rom before flashing an android pie rom?
Did you follow the installation instructions in the rom post that you tried to install?
you can always go back to miui stock downloading a fastboot rom image and using miflash
Flash stock miui 10 with mi flash and after this install miui 10 based on android p.
alexlowas said:
Hello, guys,
i unlocked my Bootloader properly, i flashed a ROM, i flashed all ROMs but the phone function is gone, no Audio Sound, no FP working!!! I dont know what to do, could someone teach me how to get my phone working again?
Click to expand...
Click to collapse
I have the same problem only the custom miui roms work properly
Did you fix it?
venezolano69 said:
I have the same problem only the custom miui roms work properly
Did you fix it?
Click to expand...
Click to collapse
Try flashing the firmware over your rom https://sourceforge.net/projects/revolutionos-miui/files/9.3.7/Mi 8 Lite/ then do wipes (cache and dalvik)
SubwayChamp said:
Try flashing the firmware over your rom https://sourceforge.net/projects/revolutionos-miui/files/9.3.7/Mi 8 Lite/ then do wipes (cache and dalvik)
Click to expand...
Click to collapse
Flash it before the rom and then reboot?
venezolano69 said:
Flash it before the rom and then reboot?
Click to expand...
Click to collapse
Yes, it could be before or after. This issue would be solved by restoring vendor partition but most of user don't made a backup before flash custom roms
SubwayChamp said:
Yes, it could be before or after. This issue would be solved by restoring vendor partition but most of user don't made a backup before flash custom roms
Click to expand...
Click to collapse
I can try with the backup of vesnor partition
venezolano69 said:
I can try with the backup of vesnor partition
Click to expand...
Click to collapse
Try it before if you have it
SubwayChamp said:
Try it before if you have it
Click to expand...
Click to collapse
I have the vendor partition of miu.eu pie
venezolano69 said:
I have the vendor partition of miu.eu pie
Click to expand...
Click to collapse
Try the next if one of this doesn´t result:
- Restore the vendor partition, do wipes, reboot
- Flash the firmware linked over your rom, do wipes, reboot
- Do a clean flash again, wipe cache, dalvik, system and data (if it´s important backup it before), flash the custom rom you are using, GApps, Magisk, reboot.
Report results to help others.
SubwayChamp said:
Try the next if one of this doesn´t result:
- Restore the vendor partition, do wipes, reboot
- Flash the firmware linked over your rom, do wipes, reboot
- Do a clean flash again, wipe cache, dalvik, system and data (if it´s important backup it before), flash the custom rom you are using, GApps, Magisk, reboot.
Report results to help others.
Click to expand...
Click to collapse
All of those step?
This guy is a savior.
Thank you, @SubwayChamp
Flashing fw_platina_miui_MI8LiteGlobal_9.2.15_35fd209ab5_9.0.zip solved my problems with sound and mic!
venezolano69 said:
All of those step?
Click to expand...
Click to collapse
No, just one and it doesn´t work then try the next. An user are reporting that by flashing firmware was solved so try first this step. @Snowdine Glad it solved.
SubwayChamp said:
No, just one and it doesn´t work then try the next. An user are reporting that by flashing firmware was solved so try first this step. @Snowdine Glad it solved.
Click to expand...
Click to collapse
It works with flashing the firmware
Thanx you save me