I create a zip flasheable with the camera application of the new oneplus 5 and I share it with you
Portrait mode doesnt work for obvious reasons
Do a full backup just in case
Downloads
https://mega.nz/#!dIFgHQSA!Bj66l6xryEZQ88GxCUCqxdDgV_tlMdMaOKtsXImJSHw
Tested on LineageOS 14.1
Is it working on stock OOS?
redsmith said:
Is it working on stock OOS?
Click to expand...
Click to collapse
idk, But if it doesnt work sure that flashing the hal3 enabler it will work
https://forum.xda-developers.com/devdb/project/?id=19756#downloads
Not working on oos beta 9 op3t
Sadly, it doesn't work on Oxygen OS, not even after flashing Hal3 enabler. Is there any difference between flashing this and installing the apk from apkmirror?
Can anyone provide libopbaselib.so from system/lib thanks
Is the camera quality noticably better? Also it doesn't work on 4.1.6, I got camera error each time I launched the app.
fioravanti.luka said:
Can anyone provide libopbaselib.so from system/lib thanks
Click to expand...
Click to collapse
There you go.
https://www.dropbox.com/s/mnc0sz7ktquuq1m/libopbaselib.so?dl=0
I've extracted it from the TWRP System image someone posted on XDA.
Can't find it right now, but will edit this post if I do.
Feel free to PM me if you need more files.
edit: OP5 OOS 4.5.1 full system backup
You can extract the system files and open them with WinRar.
https://forum.xda-developers.com/showpost.php?p=72781732&postcount=9
https://forum.xda-developers.com/showpost.php?p=72789837&postcount=33
Oneplus 5 camera isn't meant to work on the OnePlus 3T, it's hardcoded to support dual camera!
I installed the apk before I found this thread so I didn't flash this actually, but Oneplus 5's camera works for me. (3T and nexus 6).
Almost all functions work except pro mode (manual).
If there is any hints to make pro mode works, I would be very appreciated. Thanks.
As regards photo quality, I think PA's cam is better but I like Oneplus's interface more.
Works great for me except pro mode crashes app when selected, any fixes for this at all?
Works on op2?
ryanfraser38 said:
Works great for me except pro mode crashes app when selected, any fixes for this at all?
Click to expand...
Click to collapse
Pro mode is working for me. All controls work fine except ISO mode: it only works in automatic mode.
delacuestajs said:
Pro mode is working for me. All controls work fine except ISO mode: it only works in automatic mode.
Click to expand...
Click to collapse
Screenshot
delacuestajs said:
Screenshot
Click to expand...
Click to collapse
What ROM is that? Is Raw working?
redsmith said:
What ROM is that? Is Raw working?
Click to expand...
Click to collapse
Raw not working...
[26.06.17]-[7.1.2]-ZeNiTy-RR-Evolution-[EAS-VOX]-[Sultan-Cam]-[Magisk]-[MicroG]
[KERNEL] [blu_spark r151 unified OP3/3T] [OOS 4.1.* / custom ROMs]
[AKT] Advanced Kernel Tweaks v1.4 BETA
To the ones using - Is it making any difference over OP3T camera on out device ?
---------- Post added at 02:02 AM ---------- Previous post was at 02:00 AM ----------
delacuestajs said:
Raw not working...
[26.06.17]-[7.1.2]-ZeNiTy-RR-Evolution-[EAS-VOX]-[Sultan-Cam]-[Magisk]-[MicroG]
[KERNEL] [blu_spark r151 unified OP3/3T] [OOS 4.1.* / custom ROMs]
[AKT] Advanced Kernel Tweaks v1.4 BETA
Click to expand...
Click to collapse
I have almost same setup, except for kernel. I am on EX Kernel. Does Blu_spark allow you to disable touch boost that needs to be present for AKT kernel tweak to be fully functional ?
ProudRed said:
To the ones using - Is it making any difference over OP3T camera on out device ?
Not exactly... I like the manual adjustments
---------- Post added at 02:02 AM ---------- Previous post was at 02:00 AM ----------
I have almost same setup, except for kernel. I am on EX Kernel. Does Blu_spark allow you to disable touch boost that needs to be present for AKT kernel tweak to be fully functional ?
Click to expand...
Click to collapse
Just ask here:
https://forum.xda-developers.com/oneplus-3/oneplus-3--3t-cross-device-development/kernel-t3404970
Sent from my OnePlus3T using XDA Labs
ProudRed said:
To the ones using - Is it making any difference over OP3T camera on out device ?
---------- Post added at 02:02 AM ---------- Previous post was at 02:00 AM ----------
I have almost same setup, except for kernel. I am on EX Kernel. Does Blu_spark allow you to disable touch boost that needs to be present for AKT kernel tweak to be fully functional ?
Click to expand...
Click to collapse
Yes it does
vampire36 said:
Yes it does
Click to expand...
Click to collapse
If thats the case I will surely take a backup and flash this.
Related
Hi all,
Has anyone tried Lineage OS Beta 4 of the Open Kirin Website with the Mate 10 Pro L29?
Would be interested in a comparison with EMUI as now apparently most of the bugs are resolved (camera etc.)
Would be interested in this as well
030basti said:
Hi all,
Has anyone tried Lineage OS Beta 4 of the Open Kirin Website with the Mate 10 Pro L29?
Would be interested in a comparison with EMUI as now apparently most of the bugs are resolved (camera etc.)
Click to expand...
Click to collapse
Why don't you try it and report back ?
No
snachez said:
Why don't you try it and report back ?
Click to expand...
Click to collapse
If someone can link me to a full flashable EMUI ROM that I can go back to if I don't like Lineage, I would be happy to be the guinea pig.
NFC doesn't seem to be working?
Yep seems not working
Tapatalk
Hello .. i flashed it on my Mate 10 Lite .. the rom is pretty smooth and reliable .. flashed it through TWRP .. everything seems to be working .. but same as carbon the portrait and wide aperture doesn't work .. the camera just hangs until you turn them off .. front cam doesn't save pictures when beauty mode is on .. other than that it's pretty good for a beta release .. i don't know about NFC though as my device doesn't support it .. give it a shot .. and by the way .. you should use HURUPDATER method for returning to stock EMUI .. i use it and it's working like a charm for me .. going to check for bugs even deeper .. give it a shot !
NFC is no go with Los. Tried Carbon out, it has NFC so may stick to Carbon in the mean time.
Tumpster said:
No
If someone can link me to a full flashable EMUI ROM that I can go back to if I don't like Lineage, I would be happy to be the guinea pig.
Click to expand...
Click to collapse
You dont need one, flashing los only changes system partition meaning you only need to backup your own system.img , if you dont like los flash your emui system back and your good to go
---------- Post added at 12:55 PM ---------- Previous post was at 12:53 PM ----------
The only issues are nfc and that some of the camera gimmicks do not work but for regular point and shoot it's same quality as stock
ngoralph said:
You dont need one, flashing los only changes system partition meaning you only need to backup your own system.img , if you dont like los flash your emui system back and your good to go
---------- Post added at 12:55 PM ---------- Previous post was at 12:53 PM ----------
The only issues are nfc and that some of the camera gimmicks do not work but for regular point and shoot it's same quality as stock
Click to expand...
Click to collapse
How is battery life on the LOS?
I'm more interested in hearing how does this ROM excels the Stock EMUI?
ngoralph said:
You dont need one, flashing los only changes system partition meaning you only need to backup your own system.img , if you dont like los flash your emui system back and your good to go
---------- Post added at 12:55 PM ---------- Previous post was at 12:53 PM ----------
The only issues are nfc and that some of the camera gimmicks do not work but for regular point and shoot it's same quality as stock
Click to expand...
Click to collapse
Best method to backup? TWRP?
Tumpster said:
Best method to backup? TWRP?
Click to expand...
Click to collapse
no don't even install twrp
use this method to backup system.img
backup
---------- Post added at 12:15 AM ---------- Previous post was at 12:12 AM ----------
itsdan313 said:
How is battery life on the LOS?
Click to expand...
Click to collapse
consistent 6hrs sot for me
Works fine for me, Mate 10 Pro (BLA-29).
Anyone knows how to root this system? Tried LOS 15.1 su addon, but did not work.
Also why when I browse ./system folder under TWRP, this folder is empty?
Edit:
I've installed Magisk, works fine.
And for TWRP, I suggest installing Unofficial by @Pretoriano80. Now I can see content properly and also access to all partitions works fine.
taddzio said:
Works fine for me, Mate 10 Pro (BLA-29).
Anyone knows how to root this system? Tried LOS 15.1 su addon, but did not work.
Also why when I browse ./system folder under TWRP, this folder is empty?
Edit:
I've installed Magisk, works fine.
And for TWRP, I suggest installing Unofficial by @Pretoriano80. Now I can see content properly and also access to all partitions works fine.
Click to expand...
Click to collapse
I thought pretoriano twrp didn't work with custom roms. I normally get stuck in the splash screen screen of twrp.
Did you do anything special for it to work?
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Tumpster said:
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Click to expand...
Click to collapse
I ask the same. Which is the killer feature of each of them?
bihariel said:
I thought pretoriano twrp didn't work with custom roms. I normally get stuck in the splash screen screen of twrp.
Did you do anything special for it to work?
Click to expand...
Click to collapse
pretoriano twrp loads ok for me, but I had problems with some partitions - couldn't mount system in write mode and other errors.
Official twrp, works on with LOS, but I have one problem - cant write Cache partition...
Tumpster said:
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Click to expand...
Click to collapse
superandroid2011 said:
I ask the same. Which is the killer feature of each of them?
Click to expand...
Click to collapse
I only tried Lineage and Resurrection. Lineage seems smoother to me, Resurrection does have some more customisations but I switched back to Lineage.
Did anyone tried installing gcam on this lineage?
Is it working properly?
Tumpster said:
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Click to expand...
Click to collapse
RR if you want tons of customization in your rom (some customization are not working properly)
Lineage for more stability
And carbon for something in between both of them
Originally I made this as an addon to my Pie builds for View 10, but since it works for other devices as well and I want to separate it from my development thread, I decided to post it here.
This is a HwCamera2 app ported from BKL-L04 stock 8.1 with the following additional fixes:
Fixed mode switching crash on P
Resolved gallery-related issues
Fixed saving photos in portrait mode
Everything works here including portrait, AI scene detection, dual camera.
Compatibility:
O vendor version confirmed to be working on 970, 960, 659.
The full and proper functionality can be guaranteed only for 970, but it should work just fine on everything else.
P vendor version is only tested on 970.
Installation:
It's a flashable ZIP, so you just need to flash it via custom recovery.
Download:
HwCamera2 for devices with O vendor (link is always up-to-date with the latest version)
HwCamera2 for devices with P vendor (link is always up-to-date with the latest version)
Tested on the P20 lite Photo mode works fine but the aperture mode don't work. Also sometimes when changing camera modes there is a slight delay and is makes the app shut down. Othere than that works fine and still better than the app that comes installed with the Pie roms. (Kirin 659)
works for oreo?
I tried the camera on my P9 Lite, on BenzoRom, the original camera didnt work, and with this, it opens, i see the camera working for 3 seconds and the it Force Close.
ingcarranza88 said:
I tried the camera on my P9 Lite, on BenzoRom, the original camera didnt work, and with this, it opens, i see the camera working for 3 seconds and the it Force Close.
Click to expand...
Click to collapse
For me too, I'm on Honor 9.
ingcarranza88 said:
I tried the camera on my P9 Lite, on BenzoRom, the original camera didnt work, and with this, it opens, i see the camera working for 3 seconds and the it Force Close.
Click to expand...
Click to collapse
Can you get me a log, please?
flex1911 said:
Can you get me a log, please?
Click to expand...
Click to collapse
For now I'm on @phhusson's v104 and your addon works on it.
dcduartee said:
Tested on the P20 lite Photo mode works fine but the aperture mode don't work. Also sometimes when changing camera modes there is a slight delay and is makes the app shut down. Othere than that works fine and still better than the app that comes installed with the Pie roms. (Kirin 659)
Click to expand...
Click to collapse
same issue on p20 lite .
flex1911 said:
Can you get me a log, please?
Click to expand...
Click to collapse
09-09 17:34:19.761 E/SilentCameraCharacteristics(7609): can not get key <CameraCharacteristics.Key(com.huawei.device.capabilities.hwHisiliconPlatform)>
This error cause restart of app when changing modes i guess. I don't see any other one.
But for me on phh v103 and Honor 9 everything works great. Shooting at 20mpx (so it can use both cams), recording at 4K, aperture mode, panorama etc.
Great work mate :highfive:
Is it possible to make a Magisk module?
You are amazing!
Works perfect on P20 on phusson 8.1!
Hi @flex1911 try on Mate 10 but don't work on Pie Rom, attached Logs thanks
So far is working good on the Mate SE (BND-34).
What improvement would I have to use this camera in my p20?
---------- Post added at 03:11 PM ---------- Previous post was at 03:04 PM ----------
IonDEfeso said:
So far is working good on the Mate SE (BND-34).
Click to expand...
Click to collapse
curtricias said:
You are amazing!
Works perfect on P20 on phusson 8.1!
Click to expand...
Click to collapse
What improvement would I have to use this camera in my p20?
Drekko said:
What improvement would I have to use this camera in my p20?
---------- Post added at 03:11 PM ---------- Previous post was at 03:04 PM ----------
What improvement would I have to use this camera in my p20?
Click to expand...
Click to collapse
When you are on a rom that's not stock emui , you don't have the great software and functionality of the camera. With this port you can have the same software and functionality from stock emui on any rom. Many people keep with stock emui for this reason. We have a great camera on our device. But you can't use it at it's full power on other roms. And that is a bit of a shame.
@flex1911 tried it on Benzo gsi not working
Working like a charm on P20 (EML-L29) with phhtreble 8.1
Thought there is an issue with the screen ratio. The black square with mode selection shouldn't be that big.
infernusdark said:
Is it possible to make a Magisk module?
Click to expand...
Click to collapse
I updated mine with the new APK along with libs, it's on the repo
Codebucket said:
I updated mine with the new APK along with libs, it's on the repo
Click to expand...
Click to collapse
Thanks, but did you post an older version or missed a lib? I'm having the same issue as this post here: https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/post77559778
Can anyone with a p20 pro confirm raw works in pro mode?
This rom is based in J730FM Rusia firmware.
Changelog.
Clean: Don't have Google, Microsoft, Knox apps.
Camera: more mods and voice control.
AOD: more mods and enable in Samsung theme store.
Video: control with gestures.
Themes: Pay themes don't have limit time.
Goodlock: all apps with the last update. (13/Sept/18)
Enable: calls record, floating messages, record screen, etc.
Install with recovery TWRP.
Rom Link:
Video:
The stock kernel have problem with USB (computers don't detect the phone).
So you need to install Helios Kernel V2 by ananjaser1211:
It is based on the 8.1 stock rom?
PauloRMag said:
It is based on the 8.1 stock rom?
Click to expand...
Click to collapse
Yes.
IS the rom STABLE?
ts rom is great, but by activating the developer mode and clicking on it the settings error has stopped. Any way to fix this?
One question, is there any way to add a working antinevoa camera mode? Thank you and using your excellent rom.
Edit: solved problem of developer mode, had forgotten to install the kernel. Pardon.
RohitDas said:
IS the rom STABLE?
Click to expand...
Click to collapse
Yes
J730F ?
Screen Capture quick toggle missing.
Elite Turner and Good Lock sends denied root permission and only shows white screen.
For the rest, this rom is perfect!
prbs1982 said:
Screen Capture quick toggle missing.
Click to expand...
Click to collapse
The toogle only appear when smart capture is installed but smart capture fail in stock rom.
NietoGil said:
Elite Turner and Good Lock sends denied root permission and only shows white screen.
For the rest, this rom is perfect!
Click to expand...
Click to collapse
In Magisk app, go to the menu #SuperUser. Active Elite Turner
Maef200 said:
In Magisk app, go to the menu #SuperUser. Active Elite Turner
Click to expand...
Click to collapse
You were right, all is working good now. Now this rom is perfect at all.
Thank you very much! :good:
Hi I would like to know if the screenshot works well because I use a lot thanks:good:
samlis said:
Hi I would like to know if the screenshot works well because I use a lot thanks:good:
Click to expand...
Click to collapse
Screenshot is stock. Dont have the smart capture (large screenshot, edit, toogle)
Im experiencing laggy systemui and recent apps slow do you guys have the same problem?
is baseband working on stock kernel?
Agrim720 said:
is baseband working on stock kernel?
Click to expand...
Click to collapse
I have a J730G, and the stock kernel is from J730FM.
I have some problems but righ now I was working to get all the stock kernels for all models.
does the stock rom drain fast? even in battery saving mode?
This rom Volte work ?
---------- Post added at 09:39 AM ---------- Previous post was at 09:15 AM ----------
Plz replay me this rom suport volte mode?
Xxxnano said:
This rom Volte work ?
---------- Post added at 09:39 AM ---------- Previous post was at 09:15 AM ----------
Plz replay me this rom suport volte mode?
Click to expand...
Click to collapse
Yes, this rom supports Volte
These app are ported and configured for max pro m1
Requirements:
- The camera2 api
- Snapdragon SoCs 64 bit ROMs
- Android 9.0
Whats different? :
-Configured to work in Stock and Custom roms
-Disabled useless features which doesn't work in our device
New GCAM Build Based on InnocentParrot's Gcam ports
GoogleCamera_6.3.017_innocentParrot_althafvly
-Added Some cam libs for max pro m1
-Slow motion disable toggle
-Some minor changes in settings
Download
ZIP (Flashable through twrp or any other recovery) -> installs in system/app/GoogleCamera
https://www.androidfilehost.com/?w=files&flid=287726
Asus Max Pro m1/m2 Camera requires Sepolicy commits to work bokeh/portrait mode . So use permissive mode or sepolicy added roms like my build lineage-16.0 : Link or Havoc: Link
Asus Stock SnapdragonCamera from Max pro M1 PIE .053 firmware
Bugs
-Save to SDCARD
Installation : Install as normal apk
https://www.androidfilehost.com/?fid=6006931924117935223
Asus Stock SnapdragonCamera from Max pro M2 PIE .066 firmware
Bugs
-Save to SDCARD
Installation : Install as normal apk
https://androidfilehost.com/?fid=6006931924117935222
Credits:
Arnova8G2 ,BSG, Tolyan009/TlnNeun,miniuser123, eszdman, namok, defcomg, IDan1109,marlin-ku,miui,asus
Can you port this to 3GB/4GB variant as well? i tried it, camera crashed in my variant.. i can give logs if you want..
Switching to front camera force closes app. Using stock rom no root
Not working on aex 3gb variant
althafvly said:
This app is based on " MGC_6.1.021_BSG&Arnova-based_TlnNeun ".
I only tested it in my 6gb variant With stock 8.1.0 with latest security patch
Requirements:
- The camera2 api
- Snapdragon SoCs 64 bit ROMs
- Android 8.1.0 or UP
Whats different? :
-Configured to work in Stock Oreo without any issues
-Disabled Slowmotion (Doesn't work in M1)
-Removed Custom Libs
-NIght mode working
-No greent tint
-Disabled useless features which doesnt work in our device
Download
Credits:
Arnova8G2 ,BSG, Tolyan009/TlnNeun,miniuser123, eszdman, namok, defcomg, IDan1109.
Click to expand...
Click to collapse
Not working in 6gb version gives force close error.
worked fine for almost 2 days ... after that the capture button turns grey... when i try to take a photo
New base "" MGC_6.1.021_BSG_Arnova_TlnNeun_1.2_Final ""
Check OP
-Updated to work with pie
New base MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun
New:
- Added option to save/restore your settings:
Go to Settings > Save settings to save them. Switch between configs by double taping the back area around the capture button. Configs are saved on your phone's storage inside /GCam/Configs.
Thanks to @namok for this implementation.
althafvly said:
New base MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun
New:
- Added option to save/restore your settings:
Go to Settings > Save settings to save them. Switch between configs by double taping the back area around the capture button. Configs are saved on your phone's storage inside /GCam/Configs.
Thanks to @namok for this implementation.
Click to expand...
Click to collapse
Best Settings for 6GB Ram variant?
Doesnt work for 4gb
Thanks for such great work. Here are sone inputs... 1. Camera not clicks if HDR is turned off 2. Number of frames for HDR can be increased.
NEW UPDATE
-No more going gray button while clicking photo
Working on 3gb variant?
althafvly said:
NEW UPDATE
-No more going gray button while clicking photo
Click to expand...
Click to collapse
Great work dev :good:
Is the new update based on GCam_Pixel3Mod_1.3_build.6.1.021 ?
Thanks a lot
---------- Post added at 02:44 PM ---------- Previous post was at 02:24 PM ----------
It stopped working
mightytruck said:
Thanks a lot
---------- Post added at 02:44 PM ---------- Previous post was at 02:24 PM ----------
It stopped working
Click to expand...
Click to collapse
+1
@althafvly the app opens only the first time after install. We get Camera Stopped Working after that. Kindly fix it dev. Thanks for your work.
Andro Enthusiast said:
+1
@althafvly the app opens only the first time after install. We get Camera Stopped Working after that. Kindly fix it dev. Thanks for your work.
Click to expand...
Click to collapse
Clear the app data then go to app permissions & enable all the necessary permission
That's it, You are good o go!
Dronzerr said:
Clear the app data then go to app permissions & enable all the necessary permission
That's it, You are good o go!
Click to expand...
Click to collapse
You're on stock? If yes, then please tell me everything is working on stock without problems?
TheAkshay02 said:
You're on stock? If yes, then please tell me everything is working on stock without problems?
Click to expand...
Click to collapse
app is unstable for stock ROM!
gives FC
TheAkshay02 said:
You're on stock? If yes, then please tell me everything is working on stock without problems?
Click to expand...
Click to collapse
Yes i am on stock it works once or twice but then it stops and u have to clear data to reset the app
https://drive.google.com/open?id=1LnLMkjadZDDe5cUUAH_e51zdIvdUIRGS
Can you provide more information?
AsusZenFone3Deluxe said:
https://drive.google.com/open?id=1LnLMkjadZDDe5cUUAH_e51zdIvdUIRGS
Click to expand...
Click to collapse
Thanks mate,works fine on havoc 3
It will work in pie?
Source ? : https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/
Oblemay said:
Source ? : https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/
Click to expand...
Click to collapse
dont share developer because first version
Tried installing. And it says app not installed. Did I miss any steps?
How to enable astrophotography mode in this mod? It is not showing 'phone is steady' in the night sight mode. Else great build.
---------- Post added at 02:56 PM ---------- Previous post was at 02:55 PM ----------
Ducky_88 said:
Tried installing. And it says app not installed. Did I miss any steps?
Click to expand...
Click to collapse
Uninstall the other gcam from your device.
I can't delete it from setting or app store. Is not showing an uninstall option.
It is not working properly on Pie. Instant pics with nightsight or hdr+. Did work fine on miroom with android q though.
how to disable shutter sound?
I have not found this option?
Ducky_88 said:
I can't delete it from setting or app store. Is not showing an uninstall option.
Click to expand...
Click to collapse
Can anyone help me on this?
thanks for sharing. working great.
Sadly I can't find Astro Photographie too
The gcam 7.2 version needs android 10 to work properly.
Working well for me using
MSM Xtended XQ Beta v3.0
---------- Post added at 01:31 AM ---------- Previous post was at 01:30 AM ----------
Working well for me using
MSM Xtended XQ Beta v3.0
the BSG gcam 7 works well. but there are no options for infinity focus mode, therefore you can't do astrophotography, which is a shame.
Not working on Pixel 4 rom. opening camera just closes it automatically
Okay I've been trying to install this thing but with no success.
I'm on the pixel 4 rom and it comes with gcam pre installed so naturally i tried editing the package name. But it shows error parsing package.
Any help would be recommended
Does it work with Miui 11???