These app are ported and configured for max pro m1
Requirements:
- The camera2 api
- Snapdragon SoCs 64 bit ROMs
- Android 9.0
Whats different? :
-Configured to work in Stock and Custom roms
-Disabled useless features which doesn't work in our device
New GCAM Build Based on InnocentParrot's Gcam ports
GoogleCamera_6.3.017_innocentParrot_althafvly
-Added Some cam libs for max pro m1
-Slow motion disable toggle
-Some minor changes in settings
Download
ZIP (Flashable through twrp or any other recovery) -> installs in system/app/GoogleCamera
https://www.androidfilehost.com/?w=files&flid=287726
Asus Max Pro m1/m2 Camera requires Sepolicy commits to work bokeh/portrait mode . So use permissive mode or sepolicy added roms like my build lineage-16.0 : Link or Havoc: Link
Asus Stock SnapdragonCamera from Max pro M1 PIE .053 firmware
Bugs
-Save to SDCARD
Installation : Install as normal apk
https://www.androidfilehost.com/?fid=6006931924117935223
Asus Stock SnapdragonCamera from Max pro M2 PIE .066 firmware
Bugs
-Save to SDCARD
Installation : Install as normal apk
https://androidfilehost.com/?fid=6006931924117935222
Credits:
Arnova8G2 ,BSG, Tolyan009/TlnNeun,miniuser123, eszdman, namok, defcomg, IDan1109,marlin-ku,miui,asus
Can you port this to 3GB/4GB variant as well? i tried it, camera crashed in my variant.. i can give logs if you want..
Switching to front camera force closes app. Using stock rom no root
Not working on aex 3gb variant
althafvly said:
This app is based on " MGC_6.1.021_BSG&Arnova-based_TlnNeun ".
I only tested it in my 6gb variant With stock 8.1.0 with latest security patch
Requirements:
- The camera2 api
- Snapdragon SoCs 64 bit ROMs
- Android 8.1.0 or UP
Whats different? :
-Configured to work in Stock Oreo without any issues
-Disabled Slowmotion (Doesn't work in M1)
-Removed Custom Libs
-NIght mode working
-No greent tint
-Disabled useless features which doesnt work in our device
Download
Credits:
Arnova8G2 ,BSG, Tolyan009/TlnNeun,miniuser123, eszdman, namok, defcomg, IDan1109.
Click to expand...
Click to collapse
Not working in 6gb version gives force close error.
worked fine for almost 2 days ... after that the capture button turns grey... when i try to take a photo
New base "" MGC_6.1.021_BSG_Arnova_TlnNeun_1.2_Final ""
Check OP
-Updated to work with pie
New base MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun
New:
- Added option to save/restore your settings:
Go to Settings > Save settings to save them. Switch between configs by double taping the back area around the capture button. Configs are saved on your phone's storage inside /GCam/Configs.
Thanks to @namok for this implementation.
althafvly said:
New base MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun
New:
- Added option to save/restore your settings:
Go to Settings > Save settings to save them. Switch between configs by double taping the back area around the capture button. Configs are saved on your phone's storage inside /GCam/Configs.
Thanks to @namok for this implementation.
Click to expand...
Click to collapse
Best Settings for 6GB Ram variant?
Doesnt work for 4gb
Thanks for such great work. Here are sone inputs... 1. Camera not clicks if HDR is turned off 2. Number of frames for HDR can be increased.
NEW UPDATE
-No more going gray button while clicking photo
Working on 3gb variant?
althafvly said:
NEW UPDATE
-No more going gray button while clicking photo
Click to expand...
Click to collapse
Great work dev :good:
Is the new update based on GCam_Pixel3Mod_1.3_build.6.1.021 ?
Thanks a lot
---------- Post added at 02:44 PM ---------- Previous post was at 02:24 PM ----------
It stopped working
mightytruck said:
Thanks a lot
---------- Post added at 02:44 PM ---------- Previous post was at 02:24 PM ----------
It stopped working
Click to expand...
Click to collapse
+1
@althafvly the app opens only the first time after install. We get Camera Stopped Working after that. Kindly fix it dev. Thanks for your work.
Andro Enthusiast said:
+1
@althafvly the app opens only the first time after install. We get Camera Stopped Working after that. Kindly fix it dev. Thanks for your work.
Click to expand...
Click to collapse
Clear the app data then go to app permissions & enable all the necessary permission
That's it, You are good o go!
Dronzerr said:
Clear the app data then go to app permissions & enable all the necessary permission
That's it, You are good o go!
Click to expand...
Click to collapse
You're on stock? If yes, then please tell me everything is working on stock without problems?
TheAkshay02 said:
You're on stock? If yes, then please tell me everything is working on stock without problems?
Click to expand...
Click to collapse
app is unstable for stock ROM!
gives FC
TheAkshay02 said:
You're on stock? If yes, then please tell me everything is working on stock without problems?
Click to expand...
Click to collapse
Yes i am on stock it works once or twice but then it stops and u have to clear data to reset the app
Related
Note UX Camera
TAKE BACKUP OF YOUR FULL ROM INCLUDING " EFS " using " TWRP " to your SD Card Before Flashing the zip
Note 7 Camera works on Exynos Variants
Working Camera Modes:
-Pro
-selective focus
-panorama
-video collage
-live broadcast
-slow motion
-fast motion
-virtual shot
-beauty face
-sports
-dual camera
-rear cam selfie
-surround shot
4k recording working and 16mp photo works
BUGS:
-Front Cam force closes
-Auto mode
-Flashlight
-animated gif mode
Download Link:
NOTE:
*Clear cache & Data for camera if it Force Closes on Front Cam
I have tested it on S5 G900H Deodexed MM 6.0.1 INU OS
I dont know about other variants whether it will work or not try it if you wish
*Quote me if you use my zip in your Rom or Thread*
*I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE*
*DO AT YOUR OWN RISK*
*ROOT REQUIRED*HIT THANKS IF YOU LIKE MY WORK
XDA:DevDB Information
[APP] Note 7/Note UX - Camera App [G900H], ROM for the Samsung Galaxy S5
Contributors
yash92duster
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2017-05-11
Last Updated 2017-05-11
Deleted
Brother I'm definitely waiting for a link.
Can't wait to test it out on Note 4. Will update you on if it works or not.
Deleted
Waiting for the upload brother. Can't wait. I hope your network get fixed. Using cellphone network or home?
Also, Can you check your pm box. Please
Deleted
Is it same s7 camera or better?
Deleted
catalyst05 said:
Is it same s7 camera or better?
Click to expand...
Click to collapse
It's same ui
Download Link available now
Take backup of rom before flashing
Hello
thank you , I downloaded immediately and test 900F and 910F
return has come.
pendor24 said:
Hello
thank you , I downloaded immediately and test 900F and 910F
return has come.
Click to expand...
Click to collapse
I didn't get you??
has come back after test
sorry for my bad English
pendor24 said:
has come back after test
sorry for my bad English
Click to expand...
Click to collapse
ok
Don't work g900f
Tested your camera on Space rocket Marshmallow
1. Flash doesnt work. My battery is 70% and it says low battery, unable to use flash light
2. Pro mode, taking picture in dark place cant be brightened although the focus speed is 10 seconds
3. Front cam doesnt work. Once I switch to front cam, I must wipe camera data or the camera will fc
---------- Post added at 05:09 PM ---------- Previous post was at 05:06 PM ----------
By the way your camera app can focus object faster than stock camera
Photo quality isnt good as the stock one, but I appreciate your work
willysusilo said:
Tested your camera on Space rocket Marshmallow
1. Flash doesnt work. My battery is 70% and it says low battery, unable to use flash light
2. Pro mode, taking picture in dark place cant be brightened although the focus speed is 10 seconds
3. Front cam doesnt work. Once I switch to front cam, I must wipe camera data or the camera will fc
---------- Post added at 05:09 PM ---------- Previous post was at 05:06 PM ----------
By the way your camera app can focus object faster than stock camera
Photo quality isnt good as the stock one, but I appreciate your work
Click to expand...
Click to collapse
-My battery level was below 15% so not able to check flash
-In s5 cam itself photos taken in dark place not good
-yes front cam FC
-yes focus is faster
-focus and take photo then picture quality will be good
yash92duster said:
Download Link available now
Take backup of rom before flashing
Click to expand...
Click to collapse
Thanks you for the link. Are you also working on fixing it if you figure out the bugs? Or this is it?
910F tested DPF 3 = not working
900F tested cpc 8= does not work
justforgot said:
Thanks you for the link. Are you also working on fixing it if you figure out the bugs? Or this is it?
Click to expand...
Click to collapse
I will try
But i cant guarantee
Very early builds of Android Nougat for our beloved Nexus 7 2013
What works:
Audio
Brightness
GPU Acclereration
Bluetooth
Wifi
GPS
NFC
Location services
Camera and video recording
Video playback
MTP
Sensors
Bugs:
- very poor 1080p video recording quality????
- ??
Download: v0.6
Gapps: opengapps.org (micro version recommended)
Sources: https://github.com/aosp-msm8960
Code:
[B]Changelog: [/B]
[B]v0.6[/B]
- wifi location fixed thx to @nbehary
- deleted gapps
- update to NRD90U (September security patch level)
- Night mode and nav bar settings enabled (you can find it in System UI Tuner)
- playback improvements
- proper device name (I hope so :D )
[B]v0.5[/B]
- settings fc fixed
- enabled Doze!
- 1080p 60fps option hidden in yt (our SoC doesn't support it)
- proper device name
- pico gapps included
- gapps permissions fixed
- audio improvements
- video playback improvements
- little clean
- enforcing selinux mode
[B]v0.4[/B]
- saving pictures fixed
[B]v0.3[/B]
- sensors fixed
[B]v0.2[/B]
- userdebug build (no more red border)
- video playback fixes (almost fixed - problems with 1080p 60 fps videos)
- NFC
- now rom is super smooth (just try it!)
[B]v0.1[/B]
- initial release
Maintainers:
DevSwift1
zaclimon
parrotgeek1
Credits:
opengapps team
Question I know sensors arent working yet, does this mean we can't force rotation, ie force landscape mode?
Sent from my Nexus 6P using Tapatalk
@DevSwift1 you did not post newest device tree on github, with camera fix etc
---------- Post added at 06:12 PM ---------- Previous post was at 06:12 PM ----------
djkinetic said:
Question I know sensors arent working yet, does this mean we can't force rotation, ie force landscape mode?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
https://apkpure.com/set-orientation/com.googlecode.eyesfree.setorientation
parrotgeek1 said:
@DevSwift1 you did not post newest device tree on github, with camera fix etc
---------- Post added at 06:12 PM ---------- Previous post was at 06:12 PM ----------
https://apkpure.com/set-orientation/com.googlecode.eyesfree.setorientation
Click to expand...
Click to collapse
here is camera fix https://github.com/FloNougat/androi...mmit/06887bb997a30a8f5b1b7bae2cc0dfbd8f08c35d
DevSwift1 said:
here is camera fix https://github.com/FloNougat/androi...mmit/06887bb997a30a8f5b1b7bae2cc0dfbd8f08c35d
Click to expand...
Click to collapse
No no no no nooooooo thats a terrible hack
At least set androidboot.selinux=permissive on kernel command line on boot.img
parrotgeek1 said:
No no no no nooooooo thats a terrible hack
At least set androidboot.selinux=permissive on kernel command line on boot.img
Click to expand...
Click to collapse
In future builds it will be changed
With MultiROM the rom can not flash ?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Sun_Dancer said:
With MultiROM the rom can not flash ?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
nope
Sun_Dancer said:
With MultiROM the rom can not flash ?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
for multiroom you can use kernel from @Tk-Glitch http://forum.xda-developers.com/showpost.php?p=68367876&postcount=2565 but with this kernel camera will not work
parrotgeek1 said:
No no no no nooooooo thats a terrible hack
At least set androidboot.selinux=permissive on kernel command line on boot.img
Click to expand...
Click to collapse
now we should focus on sensors and gps
Have you managed to rid the red outline flashes? I'm trying to make a build to removes it but I'm not sure how I'm going about it.
Nexus11 said:
Have you managed to rid the red outline flashes? I'm trying to make a build to removes it but I'm not sure how I'm going about it.
Click to expand...
Click to collapse
To get rid of those I had to edit the build.prop and change the string ro.build.type from eng to userdebug. If you want to build a userdebug rom you have to change the lunch properties.
Sent from my MotoG3 using Tapatalk
Guys, this is some really incredible stuff you are doing, and I think I can speak for many of us simpletons that don't know how to compile ROMs by saying that we thank you immensely for breathing new life into our aging Nexus 7's.
I'll be sure to try out every build that goes through here and offer as much help as I can.
Thanks again guys!
Thank you for amazing work on this tablet
Dziekuje za twoja wspaniala robote na ten tablet
@DevSwift1
You could try using all proprietary files from these new ones from N preview! Maybe it would fix GPS, sensors, h264
https://developers.google.com/android/nexus/blobs-preview
parrotgeek1 said:
@DevSwift1
You could try using all proprietary files from these new ones from N preview! Maybe it would fix GPS, sensors, h264
https://developers.google.com/android/nexus/blobs-preview
Click to expand...
Click to collapse
Those are the same as what is on the normal binaries page for the N7. (or I missed myself downloading them from that page. They are what I have locally anyway, and I'm pretty sure I got them from the regular page)
Thanks for hard work.
Audio works well now, but it seems caution appears earlier than stock marshmallow.
Working good for me. I didn't lose my recovery. I'm on multirom 3.0.0. I injected boot sector after installing. I'm using the stock kernel too. I installed as primary though. Thanks for all your hard work. Hope this helps others on multirom.
GPS is actually working for me. (I'm sure. I get my location is Maps with Device Only, and just to make sure installed GPS Status & Toolbox. GPS is working.)
No idea what I could say to help. It is v0.1, Gapps Nano (with Maps installed from Play). I did nothing special installing.
(Also, full Location Services seems to work too.)
nbehary said:
GPS is actually working for me. (I'm sure. I get my location is Maps with Device Only, and just to make sure installed GPS Status & Toolbox. GPS is working.)
No idea what I could say to help. It is v0.1, Gapps Nano (with Maps installed from Play). I did nothing special installing.
(Also, full Location Services seems to work too.)
Click to expand...
Click to collapse
Ok I will check it deeply
Edit: yep, it works
I create a zip flasheable with the camera application of the new oneplus 5 and I share it with you
Portrait mode doesnt work for obvious reasons
Do a full backup just in case
Downloads
https://mega.nz/#!dIFgHQSA!Bj66l6xryEZQ88GxCUCqxdDgV_tlMdMaOKtsXImJSHw
Tested on LineageOS 14.1
Is it working on stock OOS?
redsmith said:
Is it working on stock OOS?
Click to expand...
Click to collapse
idk, But if it doesnt work sure that flashing the hal3 enabler it will work
https://forum.xda-developers.com/devdb/project/?id=19756#downloads
Not working on oos beta 9 op3t
Sadly, it doesn't work on Oxygen OS, not even after flashing Hal3 enabler. Is there any difference between flashing this and installing the apk from apkmirror?
Can anyone provide libopbaselib.so from system/lib thanks
Is the camera quality noticably better? Also it doesn't work on 4.1.6, I got camera error each time I launched the app.
fioravanti.luka said:
Can anyone provide libopbaselib.so from system/lib thanks
Click to expand...
Click to collapse
There you go.
https://www.dropbox.com/s/mnc0sz7ktquuq1m/libopbaselib.so?dl=0
I've extracted it from the TWRP System image someone posted on XDA.
Can't find it right now, but will edit this post if I do.
Feel free to PM me if you need more files.
edit: OP5 OOS 4.5.1 full system backup
You can extract the system files and open them with WinRar.
https://forum.xda-developers.com/showpost.php?p=72781732&postcount=9
https://forum.xda-developers.com/showpost.php?p=72789837&postcount=33
Oneplus 5 camera isn't meant to work on the OnePlus 3T, it's hardcoded to support dual camera!
I installed the apk before I found this thread so I didn't flash this actually, but Oneplus 5's camera works for me. (3T and nexus 6).
Almost all functions work except pro mode (manual).
If there is any hints to make pro mode works, I would be very appreciated. Thanks.
As regards photo quality, I think PA's cam is better but I like Oneplus's interface more.
Works great for me except pro mode crashes app when selected, any fixes for this at all?
Works on op2?
ryanfraser38 said:
Works great for me except pro mode crashes app when selected, any fixes for this at all?
Click to expand...
Click to collapse
Pro mode is working for me. All controls work fine except ISO mode: it only works in automatic mode.
delacuestajs said:
Pro mode is working for me. All controls work fine except ISO mode: it only works in automatic mode.
Click to expand...
Click to collapse
Screenshot
delacuestajs said:
Screenshot
Click to expand...
Click to collapse
What ROM is that? Is Raw working?
redsmith said:
What ROM is that? Is Raw working?
Click to expand...
Click to collapse
Raw not working...
[26.06.17]-[7.1.2]-ZeNiTy-RR-Evolution-[EAS-VOX]-[Sultan-Cam]-[Magisk]-[MicroG]
[KERNEL] [blu_spark r151 unified OP3/3T] [OOS 4.1.* / custom ROMs]
[AKT] Advanced Kernel Tweaks v1.4 BETA
To the ones using - Is it making any difference over OP3T camera on out device ?
---------- Post added at 02:02 AM ---------- Previous post was at 02:00 AM ----------
delacuestajs said:
Raw not working...
[26.06.17]-[7.1.2]-ZeNiTy-RR-Evolution-[EAS-VOX]-[Sultan-Cam]-[Magisk]-[MicroG]
[KERNEL] [blu_spark r151 unified OP3/3T] [OOS 4.1.* / custom ROMs]
[AKT] Advanced Kernel Tweaks v1.4 BETA
Click to expand...
Click to collapse
I have almost same setup, except for kernel. I am on EX Kernel. Does Blu_spark allow you to disable touch boost that needs to be present for AKT kernel tweak to be fully functional ?
ProudRed said:
To the ones using - Is it making any difference over OP3T camera on out device ?
Not exactly... I like the manual adjustments
---------- Post added at 02:02 AM ---------- Previous post was at 02:00 AM ----------
I have almost same setup, except for kernel. I am on EX Kernel. Does Blu_spark allow you to disable touch boost that needs to be present for AKT kernel tweak to be fully functional ?
Click to expand...
Click to collapse
Just ask here:
https://forum.xda-developers.com/oneplus-3/oneplus-3--3t-cross-device-development/kernel-t3404970
Sent from my OnePlus3T using XDA Labs
ProudRed said:
To the ones using - Is it making any difference over OP3T camera on out device ?
---------- Post added at 02:02 AM ---------- Previous post was at 02:00 AM ----------
I have almost same setup, except for kernel. I am on EX Kernel. Does Blu_spark allow you to disable touch boost that needs to be present for AKT kernel tweak to be fully functional ?
Click to expand...
Click to collapse
Yes it does
vampire36 said:
Yes it does
Click to expand...
Click to collapse
If thats the case I will surely take a backup and flash this.
Originally I made this as an addon to my Pie builds for View 10, but since it works for other devices as well and I want to separate it from my development thread, I decided to post it here.
This is a HwCamera2 app ported from BKL-L04 stock 8.1 with the following additional fixes:
Fixed mode switching crash on P
Resolved gallery-related issues
Fixed saving photos in portrait mode
Everything works here including portrait, AI scene detection, dual camera.
Compatibility:
O vendor version confirmed to be working on 970, 960, 659.
The full and proper functionality can be guaranteed only for 970, but it should work just fine on everything else.
P vendor version is only tested on 970.
Installation:
It's a flashable ZIP, so you just need to flash it via custom recovery.
Download:
HwCamera2 for devices with O vendor (link is always up-to-date with the latest version)
HwCamera2 for devices with P vendor (link is always up-to-date with the latest version)
Tested on the P20 lite Photo mode works fine but the aperture mode don't work. Also sometimes when changing camera modes there is a slight delay and is makes the app shut down. Othere than that works fine and still better than the app that comes installed with the Pie roms. (Kirin 659)
works for oreo?
I tried the camera on my P9 Lite, on BenzoRom, the original camera didnt work, and with this, it opens, i see the camera working for 3 seconds and the it Force Close.
ingcarranza88 said:
I tried the camera on my P9 Lite, on BenzoRom, the original camera didnt work, and with this, it opens, i see the camera working for 3 seconds and the it Force Close.
Click to expand...
Click to collapse
For me too, I'm on Honor 9.
ingcarranza88 said:
I tried the camera on my P9 Lite, on BenzoRom, the original camera didnt work, and with this, it opens, i see the camera working for 3 seconds and the it Force Close.
Click to expand...
Click to collapse
Can you get me a log, please?
flex1911 said:
Can you get me a log, please?
Click to expand...
Click to collapse
For now I'm on @phhusson's v104 and your addon works on it.
dcduartee said:
Tested on the P20 lite Photo mode works fine but the aperture mode don't work. Also sometimes when changing camera modes there is a slight delay and is makes the app shut down. Othere than that works fine and still better than the app that comes installed with the Pie roms. (Kirin 659)
Click to expand...
Click to collapse
same issue on p20 lite .
flex1911 said:
Can you get me a log, please?
Click to expand...
Click to collapse
09-09 17:34:19.761 E/SilentCameraCharacteristics(7609): can not get key <CameraCharacteristics.Key(com.huawei.device.capabilities.hwHisiliconPlatform)>
This error cause restart of app when changing modes i guess. I don't see any other one.
But for me on phh v103 and Honor 9 everything works great. Shooting at 20mpx (so it can use both cams), recording at 4K, aperture mode, panorama etc.
Great work mate :highfive:
Is it possible to make a Magisk module?
You are amazing!
Works perfect on P20 on phusson 8.1!
Hi @flex1911 try on Mate 10 but don't work on Pie Rom, attached Logs thanks
So far is working good on the Mate SE (BND-34).
What improvement would I have to use this camera in my p20?
---------- Post added at 03:11 PM ---------- Previous post was at 03:04 PM ----------
IonDEfeso said:
So far is working good on the Mate SE (BND-34).
Click to expand...
Click to collapse
curtricias said:
You are amazing!
Works perfect on P20 on phusson 8.1!
Click to expand...
Click to collapse
What improvement would I have to use this camera in my p20?
Drekko said:
What improvement would I have to use this camera in my p20?
---------- Post added at 03:11 PM ---------- Previous post was at 03:04 PM ----------
What improvement would I have to use this camera in my p20?
Click to expand...
Click to collapse
When you are on a rom that's not stock emui , you don't have the great software and functionality of the camera. With this port you can have the same software and functionality from stock emui on any rom. Many people keep with stock emui for this reason. We have a great camera on our device. But you can't use it at it's full power on other roms. And that is a bit of a shame.
@flex1911 tried it on Benzo gsi not working
Working like a charm on P20 (EML-L29) with phhtreble 8.1
Thought there is an issue with the screen ratio. The black square with mode selection shouldn't be that big.
infernusdark said:
Is it possible to make a Magisk module?
Click to expand...
Click to collapse
I updated mine with the new APK along with libs, it's on the repo
Codebucket said:
I updated mine with the new APK along with libs, it's on the repo
Click to expand...
Click to collapse
Thanks, but did you post an older version or missed a lib? I'm having the same issue as this post here: https://forum.xda-developers.com/honor-view-10/development/rom-aosp-pie-t3829466/post77559778
Can anyone with a p20 pro confirm raw works in pro mode?
This rom is based in J730FM Rusia firmware.
Changelog.
Clean: Don't have Google, Microsoft, Knox apps.
Camera: more mods and voice control.
AOD: more mods and enable in Samsung theme store.
Video: control with gestures.
Themes: Pay themes don't have limit time.
Goodlock: all apps with the last update. (13/Sept/18)
Enable: calls record, floating messages, record screen, etc.
Install with recovery TWRP.
Rom Link:
Video:
The stock kernel have problem with USB (computers don't detect the phone).
So you need to install Helios Kernel V2 by ananjaser1211:
It is based on the 8.1 stock rom?
PauloRMag said:
It is based on the 8.1 stock rom?
Click to expand...
Click to collapse
Yes.
IS the rom STABLE?
ts rom is great, but by activating the developer mode and clicking on it the settings error has stopped. Any way to fix this?
One question, is there any way to add a working antinevoa camera mode? Thank you and using your excellent rom.
Edit: solved problem of developer mode, had forgotten to install the kernel. Pardon.
RohitDas said:
IS the rom STABLE?
Click to expand...
Click to collapse
Yes
J730F ?
Screen Capture quick toggle missing.
Elite Turner and Good Lock sends denied root permission and only shows white screen.
For the rest, this rom is perfect!
prbs1982 said:
Screen Capture quick toggle missing.
Click to expand...
Click to collapse
The toogle only appear when smart capture is installed but smart capture fail in stock rom.
NietoGil said:
Elite Turner and Good Lock sends denied root permission and only shows white screen.
For the rest, this rom is perfect!
Click to expand...
Click to collapse
In Magisk app, go to the menu #SuperUser. Active Elite Turner
Maef200 said:
In Magisk app, go to the menu #SuperUser. Active Elite Turner
Click to expand...
Click to collapse
You were right, all is working good now. Now this rom is perfect at all.
Thank you very much! :good:
Hi I would like to know if the screenshot works well because I use a lot thanks:good:
samlis said:
Hi I would like to know if the screenshot works well because I use a lot thanks:good:
Click to expand...
Click to collapse
Screenshot is stock. Dont have the smart capture (large screenshot, edit, toogle)
Im experiencing laggy systemui and recent apps slow do you guys have the same problem?
is baseband working on stock kernel?
Agrim720 said:
is baseband working on stock kernel?
Click to expand...
Click to collapse
I have a J730G, and the stock kernel is from J730FM.
I have some problems but righ now I was working to get all the stock kernels for all models.
does the stock rom drain fast? even in battery saving mode?
This rom Volte work ?
---------- Post added at 09:39 AM ---------- Previous post was at 09:15 AM ----------
Plz replay me this rom suport volte mode?
Xxxnano said:
This rom Volte work ?
---------- Post added at 09:39 AM ---------- Previous post was at 09:15 AM ----------
Plz replay me this rom suport volte mode?
Click to expand...
Click to collapse
Yes, this rom supports Volte