Just got my OP5 and cases are not available yet.
I don't any risk of damaging my brand new phone so i compared the dimensions with other phones.
The Huawei P10 Plus has similar dimensions so i'll pick up a softcase today and see if i can modify it a bit (button and camera hole cut) and see if it wil fit for a couple of weeks.
As a temporary fix since I didn't get a case either (sold out) as I was transferring Sims from my OP3 and noticed just how similar the phones are in size even if the screen is a little larger on the 5. So I put the Spigen case for my 3 on the 5, obviously the camera cutouts are wrong, but that could be easily fixed with an xacto knife.
TL;DR I put my OP3 case on my 5 until I can get a proper case for it.
@Jowhee - How about buttons? Do they fit?
Yes, I ended up using scissors to cut (hack) out an opening for the cameras and flash, I also widened the speaker port in the bottom a little. Headphone jack and USB are fine, they even work with my dock.
Jowhee said:
As a temporary fix since I didn't get a case either (sold out) as I was transferring Sims from my OP3 and noticed just how similar the phones are in size even if the screen is a little larger on the 5. So I put the Spigen case for my 3 on the 5, obviously the camera cutouts are wrong, but that could be easily fixed with an xacto knife.
TL;DR I put my OP3 case on my 5 until I can get a proper case for it.
Click to expand...
Click to collapse
thanks for the info. based off your recommendation I went ahead and ordered a ringke fusion case that will get here monday. Ill modify it and use it until we get some good cases for the op5 itself.
I just took some of my Orzly OnePlus 3 cases from last year, and make a camera cut out while I wait for my actual oneplus 5 cases to arrive! Was hard work and the cases were tough to cut but totally worth it!
http://imgur.com/a/qcp4p
http://imgur.com/a/B0iud
I have extra op3 case that fits perfect. Just can't use camera until New case comes. Im fine for time being. I feel much better using it with a case. Had note 3 fell out of my basketball shorts and cracked the screen. Would have been avoided with a case.
How about the oppo R11 case. Saw from. Gizmo China that it will fit on op5, considering both phones are identical with the casing. Just need to figure out how to make a small hole for the notification slider. The bumper case from Oneplus is a bit pricey, I would rather use the fund to get an extra dash charger to put it in my office.
oneplus 3 case fits just fine. just cut a hole for the camera lol
Guess I was lucky with my order, arrived yesterday
Luckly enough in alot of places you can get quailty cases from companies like Orzly within a few days
Man, still using a ringke case for the 3. I ordered one from China, one from what I thought was in Cali but turns out a drop shipper from China, and the orzly case off amazon which ships from England, all on the same day I ordered the phone.
Sucks to be in the states sometimes lol.
I ordered a clear silicone case from Amazon from KP technology. Purchased on 27th and receive 29th. £2.99 worth buying just to protect your phone for the time being.
Just buy an Oppo R11 case, it's basically the same phone, the camera is mounted in the exact same place.
e.g. :
http://www.ebay.co.uk/itm/Nillkin-Super-Frosted-Shield-Hard-Case-Cover-for-OPPO-R11-/172744557507
Only thing is, I think those cases would cover the rear mic.
---------- Post added at 12:01 PM ---------- Previous post was at 11:30 AM ----------
These look fun too:
https://www.amazon.co.uk/dp/B073M6C83M/
djsubterrain said:
Just buy an Oppo R11 case, it's basically the same phone, the camera is mounted in the exact same place.
e.g. :
http://www.ebay.co.uk/itm/Nillkin-Super-Frosted-Shield-Hard-Case-Cover-for-OPPO-R11-/172744557507
Only thing is, I think those cases would cover the rear mic.
---------- Post added at 12:01 PM ---------- Previous post was at 11:30 AM ----------
These look fun too:
https://www.amazon.co.uk/dp/B073M6C83M/
Click to expand...
Click to collapse
Or just purchased the flexicase from Orzly which is actually shipping from Amazon
djsubterrain said:
Just buy an Oppo R11 case, it's basically the same phone, the camera is mounted in the exact same place.
e.g. :
http://www.ebay.co.uk/itm/Nillkin-Super-Frosted-Shield-Hard-Case-Cover-for-OPPO-R11-/172744557507
Only thing is, I think those cases would cover the rear mic.
---------- Post added at 12:01 PM ---------- Previous post was at 11:30 AM ----------
These look fun too:
https://www.amazon.co.uk/dp/B073M6C83M/
Click to expand...
Click to collapse
Just a note on this. The Oppo r11 cases fit but it's not perfect. There is overlap with the power button, and volume keys. The case doesn't go high enough to cover the whole button. On the bottom, the headphone jack is covered up by like 1mm but you can cut it. The mic hole is off too. It works though.
Related
Hello Everyone,
Has anyone come across a Leather case/pouch big enough for the Amaze that will hold a TPU case and the phone? I have a TPU case but want the TPU to fit in the leather case like my old phone did. I have a case of the dropsies and would rather not keep it in my pocket.
D
Looking for the same here.
Leather Case/Holster
Try here maybe?
http://www.daydeal.com/home.php?cat=6230
I haven't actually bought anything from here yet.
Just tried to search up some things for you.
Hope this helps.
I have been looking other sites also. My guesstimation is that with the TPU case on the phone measures 132mm x 70mm x 18mm.
I am digging through that site now.
Thanks,
D
I bought this one, it is a carry over from my HD2. It is a bit large for the Amaze, but I use the inner pocket for two spare batteries. With my Diztronic case, the phone fits quite well.
EDIT: I suppose a URL would be nice. D'oh!
http://www.amazon.com/gp/product/B004O6347M/ref=ox_sc_act_title_1?ie=UTF8&m=ATVPDKIKX0DER
Leather Case/Holster
stevedebi said:
I bought this one, it is a carry over from my HD2. It is a bit large for the Amaze, but I use the inner pocket for two spare batteries. With my Diztronic case, the phone fits quite well.
EDIT: I suppose a URL would be nice. D'oh!
http://www.amazon.com/gp/product/B004O6347M/ref=ox_sc_act_title_1?ie=UTF8&m=ATVPDKIKX0DER
Click to expand...
Click to collapse
Hey stevedebi would you mind posting up a picture of this holster that you got, front and back?
I'm trying to see about the clip and/or belt loops.
The amazon link doesn't show the back of the holster.
I don't like wearing it the clip since I have a tendency to break them.
Belt loops work so much better for me.
If could post pictures that would be awesome. Thanks!
nguyendqh said:
Hey stevedebi would you mind posting up a picture of this holster that you got, front and back?
I'm trying to see about the clip and/or belt loops.
The amazon link doesn't show the back of the holster.
I don't like wearing it the clip since I have a tendency to break them.
Belt loops work so much better for me.
If could post pictures that would be awesome. Thanks!
Click to expand...
Click to collapse
Take a look at the URL from the company site. It has lots of views. Actually, I ONLY use belt loop, and this one is great - you slip the clip over the belt and it never comes off. I was hesitant at first, but it is great.
I do use a wider belt, about 1.5 inch; I've never used it with a narrow belt.
http://www.niteize.com/collections/rugged-phone-cases/products/clip-case-sideways
EDIT: I use the largest one.
I found one that fits perfectly with the tpu case on. I got it with 3 other accessories as well. here's a link
well couldn't post the link due to not having 8 posts yet but i'll still put some pics on I hope lol.
The data cable works but you actually lose charge while its plugged in, the pouch is the best part of it and it came with a clip and 2 belt loops on the back for a belt I have the smoky TPU case for the amaze 4g. This is labeled for the ATT infuse 4g. I'll post some pictures of it here in a bit. Hopefully you can get it separate without the crappy extras.
PhantomWraith said:
I found one that fits perfectly with the tpu case on. I got it with 3 other accessories as well. here's a link
well couldn't post the link due to not having 8 posts yet but i'll still put some pics on I hope lol.
The data cable works but you actually lose charge while its plugged in, the pouch is the best part of it and it came with a clip and 2 belt loops on the back for a belt I have the smoky TPU case for the amaze 4g. This is labeled for the ATT infuse 4g. I'll post some pictures of it here in a bit. Hopefully you can get it separate without the crappy extras.
Click to expand...
Click to collapse
What's the case called and where did you get it from?
If you don't mind.
Thanks.
nguyendqh said:
What's the case called and where did you get it from?
If you don't mind.
Thanks.
Click to expand...
Click to collapse
I got it on amazon it was for the infuse 4g, It came with headphones, car charger, wall charger and the carry case I am planning to post pics so you can see the case but I have to have 8 posts before it will let me post external links. It was sold by Bluemall hope that helps. I'm trying to find a way to post 8 posts without breaking any rules atm lol.
---------- Post added at 02:06 PM ---------- Previous post was at 02:00 PM ----------
here's one that very close and its going for 1.57
Premium Executive Black Horizontal Leather Carrying Pouch Case for Samsung Infuse 4G
is the name of it on amazon.com mine doesn't have the little metal symbol in the corner.
---------- Post added at 02:41 PM ---------- Previous post was at 02:06 PM ----------
[/IMG][/IMG][/IMG]
I would show it with the amaze 4g and TPU case inside but I took the pictures with the phone so it was a bit hard to do that.
---------- Post added at 02:42 PM ---------- Previous post was at 02:41 PM ----------
[/IMG]
[/IMG]
---------- Post added at 03:33 PM ---------- Previous post was at 02:42 PM ----------
[/IMG]
here's a shot of the phone in the carry case using my webcam.
---------- Post added at 03:36 PM ---------- Previous post was at 03:33 PM ----------
also here's a link directly to what I ordered and got that carry case with it.
http://www.amazon.com/gp/product/B004YNJKH8
Hmm I wonder if that will fit the Amaze with a d3o case on it.
HMM....
Looks nice though with the tpu case on it.
Fits with no problems at all? Slides in and out easily?
That case doesn't look anything like the one in the amazon link though.
it was a little snug at first but now it slides in and out easily no problems at all with it. just had to break it in I think.
Premium Executive Horizontal Leather
I think I'm just gonna shell out 4.57 (with shipping) and order this one and see how it goes.
See if it'll fit the phone with a d3o case on it.
If it doesn't work then it doesn't work.
Might even be able to sell it back on Craigslist.
http://www.amazon.com/Premium-Execu...rrying/dp/B0050LW42Q/ref=cm_cr_pr_product_top
let me know how that goes so if I do get a D3o case in the future i'll know =]
PhantomWraith said:
let me know how that goes so if I do get a D3o case in the future i'll know =]
Click to expand...
Click to collapse
Will do bro. I've ordered it. Just waiting on it to ship now.
Thanks All,
I finally received the Luxmo brown case from Amazon. It was 5.54 and free shipping. Other then the Velcro that I can live with the case is fine for the Amaze and TPU case on it. It is about 3mm too wide but the other dimensions are fine.
www.amazon.com/gp/product/B005ON4HSE/ref=oh_o00_s00_i01_details
Guys on a side note, there is a "Holster Swivel Combo Belt Clip Cover Case For HTC Amaze 4G" on ebay in Black, Red, Blue, Pink, and White.
BoxWave HTC Amaze 4G Genuine Leather Pouch (Nero Black)
http://www.amazon.com/gp/product/B000NWHSW8/ref=oh_o00_s00_i00_details
Premium Executive Horizontal Leather Holster
So I finally got the holster in today and here's a short video I made for it.
Just showing the holster with the phone in it and the d3o case.
Hope it helps you guys decided if you want to order one too.
http://www.youtube.com/watch?v=WdkXPyxUWB4&context=C3db245dADOEgsToPDskKMpJ9bMpvBE8o7t2s_KPaJ
And in case you do want to order one here's the link for that:
http://www.amazon.com/gp/product/B0050LW42Q/ref=oh_o03_s00_i00_details
I ordered mine from BluMall.
@nguyendqh. thanks so much bro. that really helped me out. good deal bro. you definitely promoted the item, they should be paying you lol. i will be getting one. anyway man i appreciate it. and oh yeah btw...i hit thanks lol. have a good one bro.
sethmh88 said:
@nguyendqh. thanks so much bro. that really helped me out. good deal bro. you definitely promoted the item, they should be paying you lol. i will be getting one. anyway man i appreciate it. and oh yeah btw...i hit thanks lol. have a good one bro.
Click to expand...
Click to collapse
Glad I could help. And on an extra note I was able to use headphones with the phone in the holster.
All I had to do was push the phone up a little from the bottom until the jack appeared.
This may only work with d3o cases because they add so much bulk.
Another thinner case and the phone might slide down to the bottom regardless.
When I bought my HTC Advantage 4 1/2 years ago there was no decent case for it anywhere - like the Note it has a large screen (5") and unlike the Note a very large body. I found Nutshell (a.k.a. Tough-as-Nuts) and their line of cases - built like tanks, literally with gun holster components including heavy leather and heavy-duty belt clips. We had a long discussion about it here, including pics http://forum.xda-developers.com/showthread.php?t=344605 . It ended up being the only case most XDA members bought.
Fast forward to today, now that I have my Note on pre-order my first stop was to check out the Nutshell offering for the Note. This is the one I found:
http://tuff-as-nuts.com/Samsung-Galaxy-Note-belt-case.aspx
I also happened to find an old post offering a discount, which I didn't know about when I ordered my other case. This offer may not even be valid:
http://forum.xda-developers.com/showthread.php?t=259275
I haven't ordered the case yet, I want to see how well the Note fits into my Advantage case first - it will fit the height and width but the Advantage case may be too roomy for the thickness since it is twice as thick as the Note. If I do order one I'll report back here with pics and a fresh review.
Edited 4/12. Case arrived today, ordered on March 26th (I used the "tuff02" 10% discount code mentioned below). Just as well-built as my old case, even stronger because they now build in something flat and hard into the back wall. By putting the phone into the case with the screen facing inward the screen will be fully protected. I ordered the pen loop option this time. I always carried one inside my last case but that phone was so thick there was room next to it. As I figured, there isn't enough room for a pen next to the Note - too thin. I'm not complaining.
In the last picture you can see a bump under the leather below the metal clip. That, along with the lower lip of the clip, keeps it on your belt no matter what you do.
I'm still looking for a case for mine and came across your post; thank you for sharing. I'm still gonna do some more looking, but this one is now on my list as a possibility (that is if they take them off hold and actually start making them).
FYI...
I tried the coupon code "tuff01" in the thread you linked to and it showed up 5% savings. For the heck of it I tried punching in "tuff02" and it shows 10% savings.
techntrek said:
I also happened to find an old post offering a discount, which I didn't know about when I ordered my other case. This offer may not even be valid:
http://forum.xda-developers.com/showthread.php?t=259275
Click to expand...
Click to collapse
Sweet! I'll be sure to use that.
This case is awesome. I also got one for my MDA, still looks like new.
Quick update, I noticed they removed their placeholder page for the Note case (the 2nd link in my 1st post above). I've emailed them to find out which of their cases would be best. I looked at this chart to match up to the Note's specs (146.85 x 82.95 x 9.65mm):
http://tuff-as-nuts.com/beltcasessizetable.aspx
At first glance their case #215 would work - it appears to be the right length and width, but it has twice the depth as it should for the Note so it would flop around. Then I noticed case 270 right above it is the very one I already have for my Advantage and I already know that case is the right height, but too wide and again way too much depth. So that would mean 215 would be too long! I'm not spending $60 and waiting 2 weeks to find out it won't hold the phone securely. If I hear back from them I'll report back.
I am currently using a NutShell case I got as a freebee back at one of the PPC expos it is a very good fit (I do have the Samsung flip cover on it). The design is their basic case with the notched corners and no clip (leather slip panel the belt goes thru)
Cheers
BR
I received a reply from the company:
Almost there
Still awaiting final asset approval.
http://tuff-as-nuts.com/Samsung-Galaxy-Note-belt-case.aspx
So the placeholder page is back, and it says they are taking preorders if you are interested. I may make an order today.
Thanks for the info, techntrek. Please post if you hear anything. I'm a former (heck I still have it) Advantage owner looking into the note now, and one of the first things I'm looking at is a belt case like I used to love back then!
- I also sent you a pm. Interested in comparisons for former Advantage users to compare against the Note.
I had an Advantage. What questions do you have?
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks for the reply, but too late - I bought the Note a week ago. Loving it except for battery life problems (which I'm researching again now!)
Yup, we had a nice conversation comparing the Advantage to the Note.
Glad to hear you got one.
BTW it looks like this case is now available. Getting ready to order, using the "tuff02" discount code.
Just ordered, may take up to 2 weeks for delivery.
I've been wearing my phone on my belt for more years then I can remember - but since I had nothing for the Note up front, I've been carrying it loose in my pocket (with screen protector & ultra-slim bumper case) for a week.
..and I might stay this way for a while. I was always catching my case on things before. I was also hoping the vibration would be easy to feel in the pocket, but this past weekend proved the vibration isn't strong enough.
Might switch back to a belt pouch later, but going to stick with this way for a while & see. Be sure to post reviews of the Tuff case when you get it!
Ditto, I've been trying it in the pocket for the last 5 1/2 weeks, also hoping I could get away from the pouch. But it was always hard getting it out, so I'm back to a pouch. I agree it is surprisingly hard to feel the thing vibrate even when its sitting right on your leg.
Updated post #2 with a full review, including pictures.
Two things I would change so far. I never used the D-ring on my old case, and never will on this one. I should have asked them to leave it off. Looks like it will be easy to remove with a razor blade.
I'm glad I got the pen holder/loop, but I should have asked them to put it on the BACK edge, and since I always wear it on my right hip, to put it on the side that faces rear (the right side as you face the back).
Some things for you to consider if you order one.
Nut case for Galaxy Note
This is my 2nd tuff-as-nuts case. My first outlived all of my 3 iPhones. It is still in almost new condition in my drawer. This is the nicest hip holster I have found. I have tried several. The clip will never break. The fit is very snug for the first week or so and then it loosens up. I am very happy with this case ever though it is expensive. I got chocolate leather with belt clip and full magnetic flap.
~ Atticus
fit with speck candyshell??
techntrek said:
Edited 4/12. Case arrived today, ordered on March 26th (I used the "tuff02" 10% discount code mentioned below). Just as well-built as my old case, even stronger because they now build in something flat and hard into the back wall. By putting the phone into the case with the screen facing inward the screen will be fully protected. I ordered the pen loop option this time. I always carried one inside my last case but that phone was so thick there was room next to it. As I figured, there isn't enough room for a pen next to the Note - too thin. I'm not complaining.
In the last picture you can see a bump under the leather below the metal clip. That, along with the lower lip of the clip, keeps it on your belt no matter what you do.
Click to expand...
Click to collapse
Thanks for valuable info re: cases w/beltclips - will the phone fit with the candy shell over it??
The fit is VERY tight with no cover. They design to the factory specs and go slightly smaller, counting on the leather to stretch a little.
They will make custom versions for a small extra charge, or you could compare all of their models by size (look for the link on the left side of their home page) and pick one that is slightly larger. The one they originally made for the Advantage is probably the one you'll need. If there is any wild chance you live in central MD you could try my old case and buy it from me if it works.
hello i have the 5.0 usa version and i was looking for a good protective case. if u guys know any please tell meee
Here's a good one
I'm going to order this case, looks very good and very cheap!
sorry for no real link, i'm too new to post links. pm me and i'll give you the link.
EDIT:turns out that case was a bust. I found another one, but it's 19 bucks plus 6 dollars shipping.
Update to my zagg review; DO NOT BUY INVISIBLE SHIELD! The back protector just peeled up and got a bunch of dirt under the edge just because I stuck it in a leather phone case that was a little snug! Absolute junk! The adhesive they use is worthless! Maybe it is just bad luck, but I doubt it since it has peeled on the front AND back! I am going to rip this junk off and reinstall some awesome xtreme guard for a 10th the price of overated zagg crap!
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
Whoops, wrong thread! Sorry!
iJimaniac said:
Update to my zagg review; DO NOT BUY INVISIBLE SHIELD! The back protector just peeled up and got a bunch of dirt under the edge just because I stuck it in a leather phone case that was a little snug! Absolute junk! The adhesive they use is worthless! Maybe it is just bad luck, but I doubt it since it has peeled on the front AND back! I am going to rip this junk off and reinstall some awesome xtreme guard for a 10th the price of overated zagg crap!
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
Whoops, wrong thread! Sorry!
Click to expand...
Click to collapse
I bought a ZAGG too, thought it was a case! Crap.
Check out www.rearthusa.com. They have a case for the Galaxy Player
Nintendo Cases for the 5.0!
Hi Folks! I bought my SGP5.0 back in January and still learning my way around it. Its a neat lil gadget and a good choice over the 7+ I was looking to get. Discovered it at the last minute as Best Buy was selling it as an MP3 player!
While at BB, I too wanted a case to keep it in and scoured the store for something that would apply. They had this Nintendo case which works great!
POWER A Pokemon Zip Case for Nintendo DS Lite
Inside it has 2 elastic bands to keep the game secure. For the 5.0, I cut out the upper band as it's not necessary, as the 5.0 will fit rather snuggly in the case. For me to get it out, I just push from the bottom and it pops out. Thats how snug it is! The other half of the case easily holds up to 2 styli and 3 memory cards.
The down side is it does not have a belt clip, but for day to day it does the trick and the case will protect your 5.0! And it's 10 bucks!
If you need a case to carry everything, then go to Walmart for this slightly larger case:
POWER A 3DS Mini Transporter Case Blue 3DS Nintendo DS Dsi
The front compartment has a nice pocket to hold your 5.0 with a velcro strap, and styli. The back half can hold 12 memory cards, or if you don't need that many, there's room for your usb cord and ac adapter. This case has a handle that you can loop your belt through to keep it at your side. At the store it was in black as well as blue, and cost $15.
I hope all this helps. I too checked online, but did want to spend a lot of money on a case or wait for Samsung to make one.
Steve
BTW, try one of those small picture frame stands to hold your 5.0 landscape style for watching videos/movies! You'll have to add those little rubber cushions to keep it from sliding, and you may have to shape the stand to better hold the 50, but it works and can be carried easily as it folds.
I have a Riot Outfitters case.Bought from Best Buy. I like the feel of it, and come with a handy kickstand. Though, it did brush of SOME paint in about 3 months. Still, i would like to see a clear case for the SGP5.0 to see that SEXY back.
Just received my Rearth case with screen protector and now I feel comfortable taking my Galaxy Player everywhere I go. It also looks sexy.
I'll post some photos of my Galaxy Player when I get home.
Sent from my Galaxy Nexus using XDA
i n f a m o u s said:
Just received my Rearth case with screen protector and now I feel comfortable taking my Galaxy Player everywhere I go. It also looks sexy.
I'll post some photos of my Galaxy Player when I get home.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Yea I bought one of those cases for my US player as well back when they first came out. The thing is, there is a small hole on the bottom for an HDMI port which leads me to believe the case is meant for the Korean player. I also noticed that the case is a bit too long because it does not fit over the front speaker all the way. Although I visited their page recently and noticed that it's been fixed, so I may consider repurchasing.
Rearth Ringke SLIM on SGP5.0 or YP-G70
My Samsung Galaxy Player (US version) fits very well in this case. A few of the first batches were shrunken, but now they have solved the problem. It fits snugly and protects it nicely. There are cutouts for the international version for the antenna and the sim card placement (?). Even with the cutouts, it has protected my device from many drops and falls. It's a good millimeter thick beyond the camera and speakers. It's on Amazon right now for about $16 US.
~DatamanTheGreat
Hello everyone,
I wasn't expecting to be writing this so soon if I'm honest. Expected a few more days before I got rang by my wife whilst and work and asked what I'd ordered this time.
So the Orzly Pro-Fit Tempered Glass landed in my hands today (as well as their 5 pack film set, but I'll get to that later) and since we're having issues with the Official OnePlus TGSP it made sense to remove that and get straight into this protector and find out whether it's worth you lot purchasing.
A quick disclaimer I'm writing this after applying the glass and using it for a few hours. I will keep you updated in the comments below over the next week on how it holds up.
So, how does this differ to the Official 3D screen?
- Unlike the official 3D screen, Orzly have opted for adhesive on the sides and the top but not in the middle. This was an issue with their V1 screen last year as the Dot Matrix and Oil slicks were an absolute nightmare, less so with V2. After spending a few hours with this one, I can already tell they've made some significant improvements. It feels more premium than the OP3 screen did, I can't see the dot matrix under my house lighting at all and no oil slicks.
- They have incorporated cut outs for the front facing camera and sensors. The official one just has clear glass over them.
My verdict: Buy this one.
I haven't tested many yet (infact just the official and this) but if the choice is between the two like it was last year, this one wins for me. It doesn't cut into your screen and it seems like it'll work with most cases as the fitting of it is very good.
It's also a TON cheaper than the official one and its a twin pack.
Where can I buy?
As far as I'm aware they sell on the various local Amazon sites. Two of the big ones I use are Amazon.com and Amazon.co.uk
Take a look at my video here if you want to see it in more detail:
Ordered. Thank u.
---------- Post added at 01:40 AM ---------- Previous post was at 01:30 AM ----------
Ordered. Thank u.
fracman said:
Ordered. Thank u.
---------- Post added at 01:40 AM ---------- Previous post was at 01:30 AM ----------
Ordered. Thank u.
Click to expand...
Click to collapse
No worries
Great video as usual! Thanks for sharing this! Glad I didn't pay the £18 for the official one after all the bad reports on it, waiting for my orzly one to come now!
I hope I will be able to fit it in this case
Silicone TPU bumper case
@niijonodhg you just saved me $30, thanks! I subscribed to your channel, too
Thanks for this, just confirmed what I was hoping. Another quailty product from Orzly. I still can't fathom why OnePlus made such a terrible screen protector and charged people more for it.
Ph0enix_216 said:
@niijonodhg you just saved me $30, thanks! I subscribed to your channel, too
Click to expand...
Click to collapse
Thanks
dodged a bullet there, thanks mate :good:
Hmm says won't deliver till July 20th +
Thanks!!! I'll give it a try.
I bought a clear one off amazon before this one was available. It should be here by Friday. If it fits and looks as good as yours, i'll provide a link. If not, I'll buy this one. Thank you for the review!
NightMean said:
I hope I will be able to fit it in this case
Shockproof-Silicone-Slim-Hybrid-Case-Soft-Bumper-TPU-Cover-For-OnePlus-5-3-3T
Click to expand...
Click to collapse
Be sure to let people know when you try it,. According to what the actual manufacturers are saying about them though, they have written the following...
PLEASE NOTE: The Pro-Fit Glass Screen Protector is designed to work with Orzly Cases for the Oneplus 5. We cannot however guarantee its compatibility with OnePlus 5 cases from other manufacturers
This doesn't mean that it won't fit another case, but it does mean it's risky. So probably a good idea is if anyone on here tries different cases with this screen protector that we let as many people know on here which ones fit with it versus which ones didn't, as that may be our only way to truly guage this. The Orzly screen protector definitely seems like the only tempered glass screen protector that works well with the phone, so whatever I do I'm going to need to base my case around what works with that, so the more info I could get on this, the better. (I'll probably just get one of orzly 's cases anyway at first just to be sure, but would be nice to know what all the options are for later on (if there are any)
AnabolicAndroidz said:
Be sure to let people know when you try it,. According to what the actual manufacturers are saying about them though, they have written the following...
PLEASE NOTE: The Pro-Fit Glass Screen Protector is designed to work with Orzly Cases for the Oneplus 5. We cannot however guarantee its compatibility with OnePlus 5 cases from other manufacturers
This doesn't mean that it won't fit another case, but it does mean it's risky. So probably a good idea is if anyone on here tries different cases with this screen protector that we let as many people know on here which ones fit with it versus which ones didn't, as that may be our only way to truly guage this. The Orzly screen protector definitely seems like the only tempered glass screen protector that works well with the phone, so whatever I do I'm going to need to base my case around what works with that, so the more info I could get on this, the better. (I'll probably just get one of orzly 's cases anyway at first just to be sure, but would be nice to know what all the options are for later on (if there are any)
Click to expand...
Click to collapse
I'm planning on making another video, just as soon as a bunch of cases arrive! But if someone else can get to it sooner, then please do!
Thanks a lot for the video. Nice to hear it doesn't cut into the sides of the screen like others. What's your opinion on how deep the fingerprint scanner feels in the cutout?
Seems that Orzly is shipping them from the UK... found a similar one that ships from the united states - https://www.amazon.com/s?keywords=Oneplus+5+Screen+Protector&hidden-keywords=B07378RSWD. I've used amfilm a lot before- never any issues at all.
biglilsteve said:
Thanks a lot for the video. Nice to hear it doesn't cut into the sides of the screen like others. What's your opinion on how deep the fingerprint scanner feels in the cutout?
Click to expand...
Click to collapse
I've not really noticed it, the cut out is slightly wider than the the fingerprint sensor so leaves a good gap around it.
Augman said:
Seems that Orzly is shipping them from the UK... found a similar one that ships from the united states - https://www.amazon.com/s?keywords=Oneplus+5+Screen+Protector&hidden-keywords=B07378RSWD. I've used amfilm a lot before- never any issues at all.
Click to expand...
Click to collapse
I had a small issue with the amFilm TGSP for the Nintendo Switch not staying on the Switch properly under heat. But other than that it was reasonably OK.
niijonodhg said:
I've not really noticed it, the cut out is slightly wider than the the fingerprint sensor so leaves a good gap around it.
Click to expand...
Click to collapse
Thanks sir.
Sent from my ONEPLUS A5000 using Tapatalk
niijonodhg said:
I had a small issue with the amFilm TGSP for the Nintendo Switch not staying on the Switch properly under heat. But other than that it was reasonably OK.
Click to expand...
Click to collapse
I've heard that that is from the dock. My son has the Switch and we had that issue. They sent a free replacement that worked for him. Might be worth sending an email.
So Orzly is better because it dont cut the screen like OP official tgsp?
For me i think Oneplus own is better because adhesive on entire visible part, even when it comes about 0.3mm top of sides. I have used Orzly products many years. V2 for OP3T was disappoined mostly thanks to glue on borders only. Screen wont look that clear as with tgsp with full adhesive or without tgsp at all. Also oil slick can come because adhesives only on sides. It depends how greatly you clean your screen.
Sent from my OnePlus5 using XDA Labs
I purchased a oneplus 6t a few weeks ago and am now looking for a case with a built in magnetic ring. I have a magnetic mount that I really like using and after my last flight I decided I really want something that can prop my phone up. Funny how little things made me change my mind about the screen size and having a kickstand of sorts. Anyways, I've been looking on Amazon and all the cases I see look like clones of each other and the ones that people review on mention how it is flimsy, provides poor protection and the ring breaks after 4 days. Also the text, auto focus and ultimate experience really turn me off on getting the case.
Currently I'm using the case that came with the phone and I put a ailun magnetic keyring in the back but the bump is starting to annoying me when I place the phone down. Any suggestions?
https://www.aliexpress.com/item/Nil...ll-Back-Cover-for-OnePlus-6T/32890232367.html
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
jmsdvs said:
I ordered the one you're talking about. Comes in next week. I'll try and remind myself to post back to here with my results.
Click to expand...
Click to collapse
Yes, I also ordered that same one from Nillkin through Giztop last week or so .along with their H+Pro screen protector. Hopefully, it will be worth the wait if it ever gets here that is.I will be sure to post my opinions once I get it.
Hope you guys aren't disappointed when you get them. I was looking at possibly getting them, but noticed the case is for the OP6, not 6T. And if you look at the title/description, it says 6, and later 6T, very inconsistently.
https://www.ebay.com/itm/Nillkin-Sy...sh=item260afcf8ca:g:io8AAOSw5wFb-KiG&LH_BIN=1
I ordered my case from ebay, has not arrived yet but the seller is trusted. I have purchased all my cases from the same buyer, takes 2 weeks to get in Finland. And this one is for the 6T, not the 6.
The same casemodel for LG G6 was total rubbish, very flimsy and cheap. But if the pictures are right, this one is totally different. I guess it depend from the shape and size of the phone.
Ok, I've had it on for a couple days now. I actually like it. I can see how it may not provide much protection to glass as the edges are pretty even with the glass. I used to have Loopy case and this is pretty similar. The ring on the back appears to be taped on with 3m tape, but pretty sturdy nonetheless. Works on my magnetic mounts as well. For the price, I say it was worth it for now. The oem case went over the glass too much making the edge difficult to access. Gonna stick with this case.