hey,
i just unlocked the bootloader of my note 4 then i tried to install the twrp via command line.
i always get the error message remote: dtb not found when starting the twrp via the command line.
when i try to boot into twrp via volume up+power button i only see a screen with a usb cable.
i read in different forums that people installed the wrong twrp, so which one is the correct version for my redmi note 4?
i have the android 6.0.1 MMB29M version.
device info:
device tampered: false
device unlocked: true
device critical unlocked: true
charger screen enabled: false
THX FOR YOUR HELP!!
btw, its the global version
johnkevin123 said:
hey,
i just unlocked the bootloader of my note 4 then i tried to install the twrp via command line.
i always get the error message remote: dtb not found when starting the twrp via the command line.
when i try to boot into twrp via volume up+power button i only see a screen with a usb cable.
i read in different forums that people installed the wrong twrp, so which one is the correct version for my redmi note 4?
i have the android 6.0.1 MMB29M version.
device info:
device tampered: false
device unlocked: true
device critical unlocked: true
charger screen enabled: false
THX FOR YOUR HELP!!
btw, its the global version
Click to expand...
Click to collapse
You've MTK variant or snapdragon one?
Anyway, once you install twrp using fastboot flash recovery recoveryname.img ,then do not reboot, just keep the device connected and use this command to boot to twrp fastboot boot recoveryname.img
sachin n said:
You've MTK variant or snapdragon one?
Anyway, once you install twrp using fastboot flash recovery recoveryname.img ,then do not reboot, just keep the connected and use this command to boot to twrp fastboot boot recoveryname.img
Click to expand...
Click to collapse
hey sachin_n,
thxxx so much for your help, i always rebooted and then tried to use twrp instead of switching directly to it!
btw, i have the snapdragon version!
is there anything i should install now (new android version?!)
thx!
johnkevin123 said:
hey sachin_n,
thxxx so much for your help, i always rebooted and then tried to use twrp instead of switching directly to it!
btw, i have the snapdragon version!
is there anything i should install now (new android version?!)
thx!
Click to expand...
Click to collapse
Yep.
Check here *Xiaomi Redmi Note 4 [Snapdragon] ROMs, Kernels, Recoveries, & Other Development and pick one, flash it.
And do flash cm14.1 firmware if you're coming from Android 6 based Miui.
Sent from my Redmi Note 4 using Tapatalk
sachin n said:
Yep.
Check here *Xiaomi Redmi Note 4 [Snapdragon] ROMs, Kernels, Recoveries, & Other Development and pick one, flash it.
And do flash cm14.1 firmware if you're coming from Android 6 based Miui.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
thx for the great help!
can you please give me a link to
a) most stable/well balanced rom or should i stay with the original?
b)cm14.1 fw?
thx so much!
johnkevin123 said:
thx for the great help!
can you please give me a link to
a) most stable/well balanced rom or should i stay with the original?
b)cm14.1 fw?
thx so much!
Click to expand...
Click to collapse
Eh, there are tons of roms to choose from. As of my experience, if you want more customizations then go for ResurrectionRemix or AospExtended rom otherwise stick to LineageOS 14.1 latest build.
Yep, link to firmware :- https://www.androidfilehost.com/?fid=817550096634766008
Note that, flash the above mentioned firmware before installing any rom.
how to stay with stockrom? is it really that bad?
and whats the difference between the aforementioned firmware and rom?
thx for the noob question answers
johnkevin123 said:
hey,
i just unlocked the bootloader of my note 4 then i tried to install the twrp via command line.
i always get the error message remote: dtb not found when starting the twrp via the command line.
when i try to boot into twrp via volume up+power button i only see a screen with a usb cable.
i read in different forums that people installed the wrong twrp, so which one is the correct version for my redmi note 4?
i have the android 6.0.1 MMB29M version.
device info:
device tampered: false
device unlocked: true
device critical unlocked: true
charger screen enabled: false
THX FOR YOUR HELP!!
btw, its the global version
Click to expand...
Click to collapse
Try twrp ver 3.0.3.0
johnkevin123 said:
how to stay with stockrom? is it really that bad?
and whats the difference between the aforementioned firmware and rom?
Click to expand...
Click to collapse
Stock Miui is not bad. Stay with that if you like it. But if you install twrp on stock Miui don't forget to flash lazyflasher or you will get a bootloop.
Stock ROM stable is based on Android 6. Custom ROMs usually base on Android7. Because of that you better flash Android 7 Firmware before flashing a custom ROM.
Gesendet von meinem Redmi Note 4 mit Tapatalk
cy_coe said:
Stock Miui is not bad. Stay with that if you like it. But if you install twrp on stock Miui don't forget to flash lazyflasher or you will get a bootloop.
Stock ROM stable is based on Android 6. Custom ROMs usually base on Android7. Because of that you better flash Android 7 Firmware before flashing a custom ROM.
Gesendet von meinem Redmi Note 4 mit Tapatalk
Click to expand...
Click to collapse
i will stay with the stockrom for the first time. i just flashed lazy today.
i now discovered another problem...
when the phone is connected via USB with my pc, it only charges.
i changed it to MTP in in developer options, but it wont work.....
sachin n said:
You've MTK variant or snapdragon one?
Anyway, once you install twrp usingfastboot flash recovery recoveryname.img ,then do not reboot, just keep the device connected and use this command to boot to twrp fastboot boot recoveryname.img
Click to expand...
Click to collapse
Hey sachin i am also facing that same problem and i tried your solution but it is still giving that dtb error
travishtaz said:
Hey sachin i am also facing that same problem and i tried your solution but it is still giving that dtb error
Click to expand...
Click to collapse
Screenshot please?
Here it is
travishtaz said:
Here it is
Click to expand...
Click to collapse
Either Rename the recovery to recovery.img and Reflash the twrp and try to boot with the command "fastboot boot recovery.img''
Or once it's done flashing twrp, do not disconnect your device, just use physical buttons combo and enter into twrp. Iie; volume up +power key.
Thnxxx for your response
But i have downloaded twrp_mido (twrp 3.0.3.0) and flashed it, this recovery is working fine
travishtaz said:
Thnxxx for your response
But i have downloaded twrp_mido (twrp 3.0.3.0) and flashed it, this recovery is working fine
Click to expand...
Click to collapse
Alrighty then :good:
I´m having this same error but I can´t get through it.
I have the Redmi Note 4 with MIUI 9 and Android 7.x and I tried all the available recovery images I found for this model
The flash seems to work but the reboot doesn´t
Any idea?
if you install twrp on stock Miui don't forget to flash lazyflasher or you will get a bootloop.
Pls help me i m getting this remote dtb not found error in my mi note 4
johnkevin123 said:
hey sachin_n,
thxxx so much for your help, i always rebooted and then tried to use twrp instead of switching directly to it!
btw, i have the snapdragon version!
is there anything i should install now (new android version?!)
thx!
Click to expand...
Click to collapse
Sachin said:
You've MTK variant or snapdragon one?
Anyway, once you install twrp using fastboot flash recovery recoveryname.img ,then do not reboot, just keep the device connected and use this command to boot to twrp fastboot boot recoveryname.img
Click to expand...
Click to collapse
please help me with this iam not able to boot its telling dtb not found or too many links
Related
So I was on MIUI 7 with unlocked bootloader, custom recovery (twrp) and rooted. I wanted to try MIUI 8 so I downloaded the zip version from MIUI website and moved it to my phone then I go to custom recovery. I flashed the rom and before the flashing completed there was a red line of error code saying
'cannot mount /factory'
I thought that kind of error can be ignored but I guess I was wrong and now my phone stuck in MI logo.
I can still go to fastboot,
I can go to recovery,
I don't know how can i go to EDL to reflash with miflash,
when I tried going into fastboot and using adb, no devices detected.
Is this the end of my redmi note 3 life or is there a way ? Please, any help is greatly appreciated.
n.b :
It's redmi note 3 snapdragon version.
dokiace said:
So I was on MIUI 7 with unlocked bootloader, custom recovery (twrp) and rooted. I wanted to try MIUI 8 so I downloaded the zip version from MIUI website and moved it to my phone then I go to custom recovery. I flashed the rom and before the flashing completed there was a red line of error code saying
'cannot mount /factory'
I thought that kind of error can be ignored but I guess I was wrong and now my phone stuck in MI logo.
I can still go to fastboot,
I can go to recovery,
I don't know how can i go to EDL to reflash with miflash,
when I tried going into fastboot and using adb, no devices detected.
Is this the end of my redmi note 3 life or is there a way ? Please, any help is greatly appreciated.
n.b :
It's redmi note 3 snapdragon version.
Click to expand...
Click to collapse
here is the solution :- http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
p.s : also check your driver installed correctly.
zooreo said:
here is the solution :- http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
p.s : also check your driver installed correctly.
Click to expand...
Click to collapse
Exactly. Sound like your drivers aren't installed correctly. After that you should be able to flash the phone.
Sent from Note 3, Xiaomi Redmi Note 3.
zooreo said:
here is the solution :- http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
p.s : also check your driver installed correctly.
Click to expand...
Click to collapse
mr.loverlover said:
Exactly. Sound like your drivers aren't installed correctly. After that you should be able to flash the phone.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
That is very awesome! I just finished reflashing back to global stable with mi flash, thank you very much!
So the problems are on my driver? not on the twrp source file or maybe the modded boot img ? because I thought that I forgot to modify the boot.img before flashing twrp
Hello there,
I got a Kate device, which I unlocked unofficially after oficial unlock failed after 50% in September.
Now I'm running TheStrix' CM14.1 with this firmware:
http://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
But now I read, that TheStrix recommends flashing the MIUI Dev Rom, and afterwards his new 14.1 Firmware in order to run 14.1 correctly.
From what I read so far, its recommended to do the official unlock now, because it is working. And there is no chance of accidentally relocking it afterwards?
Could someone give me a hint on how to accomplish that? A short step-by-step list would be much appreciated!
I guess I would have to Flash the dev rom first, then unlock, then flash the firmware and then install CM14.1, is that right?
How do I flash the dev rom and which one is the right one?
Will my TWRP stay in place during all this or do I have to install it again? Am I using the right TWRP for all these operations?
Right now I have TWRP 3.0.0-0 cofface installed.
While TheStrix recommends using his TWRP with F2FS support. Would it be safe to flash that now?
Thank you guys so much!
The only way to do it by flashing official MIUI fastboot ROM in EDL mode via MiFlash.
Sent from my Redmi Note 3 Pro using Tapatalk
for those who want to flash custom roms without taking the time to unlock bootloader follow this steps..
1- download any miui fastboot rom
2-extract it
3- download alka twrp recovery
4-rename it recovery. img and paste it in the extracted folder thus replacing the miui recovery
5-flash using mi flash tools in EDL mode
6-now you have TWRP installed... format your phone.. and now copy the roms, mods, whatever the **** you want in your phone by pc and you can flash that
sunilband007 said:
for those who want to flash custom roms without taking the time to unlock bootloader follow this steps..
1- download any miui fastboot rom
2-extract it
3- download alka twrp recovery
4-rename it recovery. img and paste it in the extracted folder thus replacing the miui recovery
5-flash using mi flash tools in EDL mode
6-now you have TWRP installed... format your phone.. and now copy the roms, mods, whatever the **** you want in your phone by pc and you can flash that
Click to expand...
Click to collapse
Doesn't work on latest MIUI rom bro. Official recovery won't replaced.
Sent from my Redmi Note 3 Pro using Tapatalk
sunilband007 said:
for those who want to flash custom roms without taking the time to unlock bootloader follow this steps..
1- download any miui fastboot rom
2-extract it
3- download alka twrp recovery
4-rename it recovery. img and paste it in the extracted folder thus replacing the miui recovery
5-flash using mi flash tools in EDL mode
6-now you have TWRP installed... format your phone.. and now copy the roms, mods, whatever the **** you want in your phone by pc and you can flash that
Click to expand...
Click to collapse
As I said, I would like to unlock the phone once and for all. But thank you anyway!
@febry_valdy
Thank you for your reply! Could you provide a link to the correct fastboot rom? The Xiaomi website is a big riddle for me
And could you tell me what EDL Mode is?
febry_valdy said:
Doesn't work on latest MIUI rom bro. Official recovery won't replaced.
Click to expand...
Click to collapse
you are trying fastboot rom right?..
ebivan said:
As I said, I would like to unlock the phone once and for all. But thank you anyway!
@febry_valdy
Thank you for your reply! Could you provide a link to the correct fastboot rom? The Xiaomi website is a big riddle for me
And could you tell me what EDL Mode is?
Click to expand...
Click to collapse
download the zip i attached.... put phone in fastboot mode then double click edl. cmd.. the screen will go black...
then by using mi flash tool flash the miui rom with replaced recovery (i used 6.10)
also this will unlock bootloader one and for all... (until you lock it again manually)
sunilband007 said:
you are trying fastboot rom right?..
Click to expand...
Click to collapse
Yes,
Sent from my Redmi Note 3 Pro using Tapatalk
---------- Post added at 09:04 AM ---------- Previous post was at 09:03 AM ----------
@febry_valdy
Thank you for your reply! Could you provide a link to the correct fastboot rom? The Xiaomi website is a big riddle for me
And could you tell me what EDL Mode is?[/QUOTE]
Someone has uploaded edl via fastboot, there you can take a profit from it.
Sent from my Redmi Note 3 Pro using Tapatalk
febry_valdy said:
Yes,
Click to expand...
Click to collapse
i mentioned the rom i used and method above... refer to it
sunilband007 said:
i mentioned the rom i used and method above... refer to it
Click to expand...
Click to collapse
you mentioned "download any miui fastboot rom" that's all bro
febry_valdy said:
you mentioned "download any miui fastboot rom" that's all bro
Click to expand...
Click to collapse
it should work with any fastboot miui.... im just telling which one i used
sunilband007 said:
it should work with any fastboot miui.... im just telling which one i used
Click to expand...
Click to collapse
Ooh, u used 6.10 version. I just realized it. Hahha.
Sent from my Redmi Note 3 Pro using Tapatalk
Thank you all for your replies. To sum it up, I made a step-by-step list, could someone please confirm that.
1. Put phone in fastboot mode and flash official MIUI fastboot dev ROM (6.11.24) in EDL mode.
2. Unlock phone using MiUnlock
3. Install TWRP (f2fs) using fastboot
4. Install CM14 Kate firmware provided by TheStrix
5. Install CM14.1 nightly by TheStrik
6. Install Gapps
Is that about right? Can you tell me after which steps I will have to wipe? And which partitions to wipe..?
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
Currently I have Resurrection Remix Version [RR-N-v5.8.2-20170407-kenzo-Nightly ] on my Kenzo.
I tried to update it to RR-N-v5.8.3-20170529-kenzo-Nightly by flashing zip through TWRP.
But in return i got a message saying " Updater process ended with error 7 " and the update didnt take place.
Could anyone help me with this?
Ashmin Das said:
Currently I have Resurrection Remix Version [RR-N-v5.8.2-20170407-kenzo-Nightly ] on my Kenzo.
I tried to update it to RR-N-v5.8.3-20170529-kenzo-Nightly by flashing zip through TWRP.
But in return i got a message saying " Updater process ended with error 7 " and the update didnt take place.
Could anyone help me with this?
Click to expand...
Click to collapse
Flash latest firmware.
every rom I try to flash via recovery, i obtain this error: "Updater process ended with ERROR: 7" I'm on Redmi note 3 snapdragon , please help me I tried o advanced wipe all, and I have already tried all roms and tried to remove and reimage TWRP boot loader but the issue is the same .
This is the error
(( Updated process ended with error 7
Error installing zip file " /sdcard/RR-N-V5.8.3-20170529-Kenzo-Nightly.ZIP ))
tifa5500 said:
every rom I try to flash via recovery, i obtain this error: "Updater process ended with ERROR: 7" I'm on Redmi note 3 snapdragon , please help me I tried o advanced wipe all, and I have already tried all roms and tried to remove and reimage TWRP boot loader but the issue is the same .
This is the error
(( Updated process ended with error 7
Error installing zip file " /sdcard/RR-N-V5.8.3-20170529-Kenzo-Nightly.ZIP ))
Click to expand...
Click to collapse
flash firmware form official los rom thread by the strix
Note : it will relock your bootloader :good:
Minions007 said:
flash firmware form official los rom thread by the strix
Note : it will relock your bootloader :good:
Click to expand...
Click to collapse
Can you point to a tutorial on doing this?
Sent from my Redmi Note 3 using XDA-Developers Legacy app
[email protected] said:
Can you point to a tutorial on doing this?
Click to expand...
Click to collapse
these is what i did
1. wiped everything except internal and external storage
2. flashed the firmware
3. flashed rom
4. reboot to system then flashed gapps
Minions007 said:
these is what i did
1. wiped everything except internal and external storage
2. flashed the firmware
3. flashed rom
4. reboot to system then flashed gapps
Click to expand...
Click to collapse
And where do I download the latest firmware?
Sent from my Redmi Note 3 using XDA-Developers Legacy app
[email protected] said:
And where do I download the latest firmware?
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/development/rom-lineageos-14-t3542491
Minions007 said:
https://forum.xda-developers.com/redmi-note-3/development/rom-lineageos-14-t3542491
Click to expand...
Click to collapse
Hmm doesn't really link to anything with a firmware download that I can see.
Sent from my Redmi Note 3 using Tapatalk
Minions007 said:
https://forum.xda-developers.com/redmi-note-3/development/rom-lineageos-14-t3542491
Click to expand...
Click to collapse
read the thread properly first , there is link for firmware , u will see
If you're willing to go a little further, you could flash the latest MIUI developer ROM, then re-unlock bootloader and flash the newest build.
Minions007 said:
these is what i did
1. wiped everything except internal and external storage
2. flashed the firmware
3. flashed rom
4. reboot to system then flashed gapps
Click to expand...
Click to collapse
Will I have to unlock my bootloader again after updating the firmware?
Sent from my Redmi Note 3 using XDA-Developers Legacy app
[email protected] said:
Will I have to unlock my bootloader again after updating the firmware?
Click to expand...
Click to collapse
Yes u have to because it will get locked
Minions007 said:
Yes u have to because it will get locked
Click to expand...
Click to collapse
So do that between steps 2 & 3?
Sent from my Redmi Note 3 using Tapatalk
[email protected] said:
So do that between steps 2 & 3?
Click to expand...
Click to collapse
The way i did was to Flashed the ROM then go to fastboot mode and unlock the bootlaoder.
Minions007 said:
The way i did was to Flashed the ROM then go to fastboot mode and unlock the bootlaoder.
Click to expand...
Click to collapse
Okay so, flash updated firmware, flash updated ROM, then unlock the bootloader?
Sent from my Redmi Note 3 using Tapatalk
[email protected] said:
Okay so, flash updated firmware, flash updated ROM, then unlock the bootloader?
Click to expand...
Click to collapse
Yes
well this f\d up everything, I flashed the newest firmware, then I restarted in to fastboot mode to unlock the bootloader, then I got the account isn't bound to this device error. now I cant boot in to anything, and when I plug the usb in to the computer I get a flashing red light, what the hell do I do now?
[email protected] said:
well this f\d up everything, I flashed the newest firmware, then I restarted in to fastboot mode to unlock the bootloader, then I got the account isn't bound to this device error. now I cant boot in to anything, and when I plug the usb in to the computer I get a flashing red light, what the hell do I do now?
Click to expand...
Click to collapse
I has the same problem with flashing this firmware. To fix this, u have to enter in fastboot mode, then enter on EDL mode, then flash the Global Rom via MiFlash and make all the process to unlock the bootloader again. This firmware sucks.
bryanbehe said:
I has the same problem with flashing this firmware. To fix this, u have to enter in fastboot mode, then enter on EDL mode, then flash the Global Rom via MiFlash and make all the process to unlock the bootloader again. This firmware sucks.
Click to expand...
Click to collapse
yep I found some tutorial on fixing this issue. https://forum.xda-developers.com/redmi-note-3/how-to/how-to-flash-fastboot-rom-redmi-note-3-t3462402
ended up flashing 7.1.8.0 ROM, i'm just trying to get the phone back working again at this point, I'm not sure if this tutorial will result with me having an unlocked bootloader again or root or what will be the outcome.
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'