Hello i woud to know how to restore huawei y6 stock rom
from custom rom
please help my,
Notic: leave links if i have to download anything.
thanks
Desill said:
Hello i woud to know how to restore huawei y6 stock rom
from custom rom
please help my,
Notic: leave links if i have to download anything.
thanks
Click to expand...
Click to collapse
Download your this official update link => download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
extract this zip file. you'll find a folder name dload
send this dload folder to your sdcard's root directory
put the sdcard in your phone
now power on your device by pressing Vol+, Vol- and Power button at the same time.
it will start installing the official rom
N.B: It will only work with Stock Recovery.
If you don have stock recovery then
Download Huawei Update Extractor
Extract the Recovery from downloaded UPDATE.APP in dload folder
flash the Stock recovery using fastboot
Hope this will work. Coz i used this way.
da.fallen said:
Download your this official update link => download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
extract this zip file. you'll find a folder name dload
send this dload folder to your sdcard's root directory
put the sdcard in your phone
now power on your device by pressing Vol+, Vol- and Power button at the same time.
it will start installing the official rom
N.B: It will only work with Stock Recovery.
If you don have stock recovery then
Download Huawei Update Extractor
Extract the Recovery from downloaded UPDATE.APP in dload folder
flash the Stock recovery using fastboot
Hope this will work. Coz i used this way.
Click to expand...
Click to collapse
ok please how to flash stock recovery using fastfboot
Desill said:
ok please how to flash stock recovery using fastfboot
Click to expand...
Click to collapse
fastboot flash recovery recovery.img
help
Amaan007 said:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
< waiting for device >
error: cannot load 'recovery.img'
thats why ? tried sd card and int. dload
both faild
Desill said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
< waiting for device >
error: cannot load 'recovery.img'
thats why ? tried sd card and int. dload
both faild
Click to expand...
Click to collapse
turn on usb debugging and install usb drivers.
da.fallen said:
turn on usb debugging and install usb drivers.
Click to expand...
Click to collapse
already installed
already debugging on and oem unlock on
created dload folder .... with RECOVERY.img
Desill said:
already installed
already debugging on and oem unlock on
created dload folder .... with RECOVERY.img
Click to expand...
Click to collapse
you installed TWRP? put your stock recovery in sdcard... boot into recovery. then install -> install image
just select your stock recovery. flash it... you'll get your stock recovery back.
da.fallen said:
you installed TWRP? put your stock recovery in sdcard... boot into recovery. then install -> install image
just select your stock recovery. flash it... you'll get your stock recovery back.
Click to expand...
Click to collapse
so i can flash it using rashr?
Desill said:
so i can flash it using rashr?
Click to expand...
Click to collapse
Use flashify or twrp and select install Image and then then select the recovery if u trying to go back to stock ROMs copy the update.app and paste on ur phone then flash it with flashfire
---------- Post added at 07:38 AM ---------- Previous post was at 07:05 AM ----------
Desill said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
< waiting for device >
error: cannot load 'recovery.img'
thats why ? tried sd card and int. dload
both faild
Click to expand...
Click to collapse
BTW did u put the recovery file in the fastboot folder
done flash stock recovery successfull but i got new problem, stock rom always faild , tested B150 , B170 both faild always im on Cm12 now with stock recovery,
what i have to do to fix this problem?!
already formated my sd card , only dload folder, tested 2 cards 16G and 8G always faild
Desill said:
done flash stock recovery successfull but i got new problem, stock rom always faild , tested B150 , B170 both faild always im on Cm12 now with stock recovery,
what i have to do to fix this problem?!
already formated my sd card , only dload folder, tested 2 cards 16G and 8G always faild
Click to expand...
Click to collapse
look at my last comment please help me the stock rom always says software install faild
Desill said:
look at my last comment please help me the stock rom always says software install faild
Click to expand...
Click to collapse
Dude, Didn't you clean your phone?
when i flash stock recovery with twrp, before rebooting i wiped "data, internal storage, system.
then i had Stock recovery with no OS
i had dload folder in sdcard's root directory
so i powered on my device by pressing Vol+, Vol- and Power button at the same time.
Desill said:
done flash stock recovery successfull but i got new problem, stock rom always faild , tested B150 , B170 both faild always im on Cm12 now with stock recovery,
what i have to do to fix this problem?!
already formated my sd card , only dload folder, tested 2 cards 16G and 8G always faild
Click to expand...
Click to collapse
2) install lineage OS for having a rooted android on board
3) with root access,install flashfire on your Y6,and also magisk from playstore
4) download a firmware package from huawei site( i used holland-B150 one,but good also swiss FW-B140) and put the upgrade.app in the sd card
5) open flashfire,select "flash FW package" and install the upgrade.app from your sd. card,in 3 minutes you debrand android.
This is a dbrand guide it is the same with going back to srock
Amaan007 said:
2) install lineage OS for having a rooted android on board
3) with root access,install flashfire on your Y6,and also magisk from playstore
4) download a firmware package from huawei site( i used holland-B150 one,but good also swiss FW-B140) and put the upgrade.app in the sd card
5) open flashfire,select "flash FW package" and install the upgrade.app from your sd. card,in 3 minutes you debrand android.
This is a dbrand guide it is the same with going back to srock
Click to expand...
Click to collapse
hello,
now i had flashed TWRP then flashed stock recovery from twrp then formated int.storge and system then restart i have now stock recovery without OS
tried to flash Update.app by pressing on VOL+ and VOL- and power but always says software install faild
what i have to do now?
Help me please
da.fallen said:
Dude, Didn't you clean your phone?
when i flash stock recovery with twrp, before rebooting i wiped "data, internal storage, system.
then i had Stock recovery with no OS
i had dload folder in sdcard's root directory
so i powered on my device by pressing Vol+, Vol- and Power button at the same time.
Click to expand...
Click to collapse
tried to get back TWRP to flash CM12 then i try last way u gave but ADB says
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot bootloader
< waiting for device >
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
cb99de24 fastboot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot bootloader
rebooting into bootloader...
OKAY [ 0.000s]
finished. total time: 0.040s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
error: cannot load 'recovery.img'
C:\Program Files (x86)\Minimal ADB and Fastboot>
Amaan007 said:
2) install lineage OS for having a rooted android on board
3) with root access,install flashfire on your Y6,and also magisk from playstore
4) download a firmware package from huawei site( i used holland-B150 one,but good also swiss FW-B140) and put the upgrade.app in the sd card
5) open flashfire,select "flash FW package" and install the upgrade.app from your sd. card,in 3 minutes you debrand android.
This is a dbrand guide it is the same with going back to srock
Click to expand...
Click to collapse
done flashed twrp again and cm12 so i can use flashfire
but i have a question i have to use flashfire with stock recovery or twrp
Big thanks Broooooo
Desill said:
done flashed twrp again and cm12 so i can use flashfire
but i have a question i have to use flashfire with stock recovery or twrp
Click to expand...
Click to collapse
Done By flashfire im on Stock rom B170 Last v of huawei updates
thanks bro u r genious really
and helpfull
Amaan007 said:
2) install lineage OS for having a rooted android on board
3) with root access,install flashfire on your Y6,and also magisk from playstore
4) download a firmware package from huawei site( i used holland-B150 one,but good also swiss FW-B140) and put the upgrade.app in the sd card
5) open flashfire,select "flash FW package" and install the upgrade.app from your sd. card,in 3 minutes you debrand android.
This is a dbrand guide it is the same with going back to srock
Click to expand...
Click to collapse
bro when i reboot the device everytime it doing optimizing system
i have to flash the stock rom by flashfire but i have to press correct on Porotected partions ?
or without porotdected partions?
it seems like the stock rom have CM12 kerenal?
last help please tell me:good::fingers-crossed:
Desill said:
bro when i reboot the device everytime it doing optimizing system
i have to flash the stock rom by flashfire but i have to press correct on Porotected partions ?
or without porotdected partions?
it seems like the stock rom have CM12 kerenal?
last help please tell me:good::fingers-crossed:
Click to expand...
Click to collapse
Without protected partitions leave as it is and then download it
Related
Hello,
This is my first android tablet and i love it, but i have bricked it, i was messing around with it and i think i wiped it all, at this moment the device is stuck at the mediapad logo, fastboot mode is working but i can not get into recovery.
I have downloaded the two official stock roms mentioned in this post http://forum.xda-developers.com/hua...rom-official-huawei-mediapad-x1-b007-t2811863 but when i try to do
Code:
fastboot update update.zip
i get the below error:
Code:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt]
The zip file contain the dload folder and the update.app file, no .txt files in mention. Any solution to this ?
I have also tried to flash a cwm/twrp recovery (tried many variants) into the device but i can not boot into them (nothing happens, still stuck at the mediapad screen).
Code:
fastboot flash recovery recovery.img
At this moment i have only fastboot available, what can i do to unbrick the device ?
Thanks alot
zertux said:
Hello,
This is my first android tablet and i love it, but i have bricked it, i was messing around with it and i think i wiped it all, at this moment the device is stuck at the mediapad logo, fastboot mode is working but i can not get into recovery.
I have downloaded the two official stock roms mentioned in this post http://forum.xda-developers.com/hua...rom-official-huawei-mediapad-x1-b007-t2811863 but when i try to do
Code:
fastboot update update.zip
i get the below error:
Code:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt]
The zip file contain the dload folder and the update.app file, no .txt files in mention. Any solution to this ?
I have also tried to flash a cwm/twrp recovery (tried many variants) into the device but i can not boot into them (nothing happens, still stuck at the mediapad screen).
Code:
fastboot flash recovery recovery.img
At this moment i have only fastboot available, what can i do to unbrick the device ?
Thanks alot
Click to expand...
Click to collapse
Use the standard ROM flashing method by copying the update.app into dload folder onto an external sdcard and reboot your device. This ought to work. If it doesn't you've truly bricked your device by screwing up the bootloader.
The only other way if you've screwed up the bootloader is to perform a bootloader unlock using the tool on 4PDA.ru. Google Translate is rather spotty though.
joytest said:
Use the standard ROM flashing method by copying the update.app into dload folder onto an external sdcard and reboot your device. This ought to work. If it doesn't you've truly bricked your device by screwing up the bootloader.
The only other way if you've screwed up the bootloader is to perform a bootloader unlock using the tool on 4PDA.ru. Google Translate is rather spotty though.
Click to expand...
Click to collapse
Will the sdcard method work if i can not boot into recovery ? also, can you point me to that tool ? i can not find it there
zertux said:
Will the sdcard method work if i can not boot into recovery ? also, can you point me to that tool ? i can not find it there
Click to expand...
Click to collapse
Sdcard method is the default update method for Huawei. There is no need to mess with any 3-button combo or hardware.
It is the easiest update method I've seen among the major phone companies.
I will post link to the 4pda tool link later as I am at work now.
Sent from my SM-N9005 using Tapatalk
joytest said:
Sdcard method is the default update method for Huawei. There is no need to mess with any 3-button combo or hardware.
It is the easiest update method I've seen among the major phone companies.
I will post link to the 4pda tool link later as I am at work now.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I have made a little progress i think, using your post https://forum.lowyat.net/index.php?showtopic=3280093&st=840&p=70452069&#entry70452069 i have flashed the CWM recovery and i am able to boot into it (Chinese XD) and i am using the menu you translated to navigate around, i have put the stock zip that i downloaded and tried to flash the zip file but i got some erros that i did not understand (see attached screenshot)
I have noticed that when i plug the device now into the pc it shows the battery charging (something did not appear before). Also, the sdcard update method is not working (nothing happens, stays at the mediapad logo)
What should i do now ?
screenshot:
http://i59.tinypic.com/29xue0p.jpg
It says cannot open the file.
Just use the normal method of the dload folder.
You have taken a very complex route to solve a simple issue.
Sent from my Mediapad X1 7D-501L using Tapatalk HD
joytest said:
It says cannot open the file.
Just use the normal method of the dload folder.
You have taken a very complex route to solve a simple issue.
Sent from my Mediapad X1 7D-501L using Tapatalk HD
Click to expand...
Click to collapse
I have tried the dload method, i have extracted the contents of the zip file "dloadl/update.app" and put them in a 2GB memory, inserted the momeory inside the device and turned it on but nothing happens, it stays on the logo of "mediapad"
zertux said:
I have tried the dload method, i have extracted the contents of the zip file "dloadl/update.app" and put them in a 2GB memory, inserted the momeory inside the device and turned it on but nothing happens, it stays on the logo of "mediapad"
Click to expand...
Click to collapse
Then it is quite possible your download is corrupted. Try downloading again. And I think the recommendation was to use a 4Gb card.
joytest said:
Then it is quite possible your download is corrupted. Try downloading again. And I think the recommendation was to use a 4Gb card.
Click to expand...
Click to collapse
Ok, will re download and try with a 4GB memory stick, what about the bootloader unlocker that you mentioned ? do we still need that ?
zertux said:
Ok, will re download and try with a 4GB memory stick, what about the bootloader unlocker that you mentioned ? do we still need that ?
Click to expand...
Click to collapse
Just to clarify, my device is 7d-501u so i will have to download this http://www.emui.com/nsp/geturl.php?path=7D-501u_EMUI_2.0_V100R001C233B019.zip&rid=560 right ?
zertux said:
Just to clarify, my device is 7d-501u so i will have to download this http://www.emui.com/nsp/geturl.php?path=7D-501u_EMUI_2.0_V100R001C233B019.zip&rid=560 right ?
Click to expand...
Click to collapse
Yes you have to download the correct ROM for your device. 501u is the 3G version.
joytest said:
Yes you have to download the correct ROM for your device. 501u is the 3G version.
Click to expand...
Click to collapse
so i have downloaded http://www.emui.com/nsp/geturl.php?path=7D-501u_EMUI_2.0_V100R001C233B019.zip&rid=560 and it still gives me the same error in the screenshot, how can i get the correct firmware for my device ? (on the back of the device its written 7D-501u )
zertux said:
so i have downloaded http://www.emui.com/nsp/geturl.php?path=7D-501u_EMUI_2.0_V100R001C233B019.zip&rid=560 and it still gives me the same error in the screenshot, how can i get the correct firmware for my device ? (on the back of the device its written 7D-501u )
Click to expand...
Click to collapse
As far as I know, you downloaded the 501u version. Perhaps the last resort is to enable the CWM to allow ABD sideloading?
Or, you can try this "unlock bootloader" from 4PDA
http://4pda.ru/forum/index.php?showtopic=564429&view=findpost&p=34341371
It seems you just need to run the exe file. You can try this since nothing else works for you.
Appreciate if you report on the success.
joytest said:
As far as I know, you downloaded the 501u version. Perhaps the last resort is to enable the CWM to allow ABD sideloading?
Or, you can try this "unlock bootloader" from 4PDA
http://4pda.ru/forum/index.php?showtopic=564429&view=findpost&p=34341371
It seems you just need to run the exe file. You can try this since nothing else works for you.
Appreciate if you report on the success.
Click to expand...
Click to collapse
I will try the bootloader unlocker when i get home, i have tried 4 official roms for the 3G and 4G and i get this error
http://tinypic.com/usermedia.php?uo=adkBqYNLlttp9d8/5vW/a4h4l5k2TGxc
Can you tell me what does it say ? Also hoq can i re install the stock recovery of the device ? Maybe it will work ? I flashed it and installed wcm.
Update: i have downloaded the bootloader unlocker but its all in Chinese! any help is appreciated.
Update2: The bootloader is already unlocked, when i run
Code:
fastboot oem get-bootinfo
it says unlocked. however the device is not taking any rom that i try to install to it (errors in Chinese). i have extracted the system.img, boot.img and recovery.img from the update.app package, i will try to flash them into the device one by one with fastboot.
FIXED!
So for anyone who ran into the same problem, here is how i fixed it:
1. Downloaded the 7D-501u official stock ROM mentioned in this post http://forum.xda-developers.com/hua...rom-official-huawei-mediapad-x1-b007-t2811863
2. Used Huawei update.app extractor tool from http://forum.xda-developers.com/attachment.php?attachmentid=2822142&d=1403960391
3. Flashed boot.img, recovery.img and system.img
Code:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
Rebooted and it worked! the bootloader comes unlocked by default (at least for my model). Special thanks for joytest for his help.
Hello. I'm crazy. I deleted stock recovery original for my 7D-503L 4.2.2 (B008). The problem was install the stock recovery 4.4 kit Kat for error. I installed again the rom B008 and anything. Is impossible to find the stock recovery original and one CWM for my device. Somebody can I help me please? Somebody know where lies the stock recovery? I know is independently of the Rom.
Regards
Soft Brick: Stuck at Huawei logo and unbale to Boot/access Recovery.
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachd....7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
@eennap. Ok tomorrow I will to try.
Thanks and Regards
I have a bricked (7D-501L).
1 .
I download a ROM «Huawei_MediaPad_X1_7D-501L_V100R001C170B001_Android_4.2_Russia».
I unzip ROM into root sdcard.
I use Huawei update.app extractor tool, and extract from ROM «boot» and «recovery» partitions.
I flashed a «boot» and «recovery» partitions via fastboot (from it ROM).
After, I use the standard ROM flashing method. The device start flashing, but after a few minutes the device reboot.
ROM not installed, the device not start.
2.
I download a ROM OTA_7D-503LV100R002C208B002.
I extracted this ROM, and flashed a BOOT.img, CACHE.img, CUST.img, RECOVERY.img, SYSTEM.img, USERDATA.img partitions via fastboot.
The device started, but after a few minuts my device reboot to black screen FASTBOOT.
What can i do to unbrick the device ?
P.S.: sorry for bad English
how can i make update.zip from update.app?
my device not flashing standard method.
I can flash it from recovery. I need update.zip
Please, help me
Hi,
I have bricked my Honor 5x after flashing custom recovery. This these the steps I followed:
1) Unlocked the bootloader
2) Flashed TWRP recovery
3) Flashed root
4) Tried to update OTA
Now the phone is stuck at boot screen. I can enter recovery by pressing volume down and power, but now is stock recovery. And I don't know what to do.
Can someone help me?
OK u can't OTA update with twrp AND U SHOULD try adb flashing twrp through fastboot and maybe restoring a nandroid if u have one if not there's some u can download around here
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Ok, I figured it out. I took the backup and the instructions from this thread: http://forum.xda-developers.com/honor-5x/development/unrooted-stock-rom-t3308902
heinzwilli6 said:
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Click to expand...
Click to collapse
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
I tried to do that too. But the problem was that my adb didn't recognize my phone. Of course I had everything installed.
When I unlocked the bootloader earlier, it worked. But there I had to enable USB debugging. When my phone was broke, I couldn't enable it. Maybe that's why?
However, my phone is working right now, so thanks anyway.
fixed
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
nandakalyan said:
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
Click to expand...
Click to collapse
WORKED: update.app in dload folder WORKED !!! Thanks a lot
narengowda said:
WORKED: update.app in dload folder WORKED !!! Thanks a lot
Click to expand...
Click to collapse
Glad it worked! did you figure out what caused the issue?
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
sad1996 said:
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
Click to expand...
Click to collapse
Yes, it is working perfectly.
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
tomblast66 said:
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
Click to expand...
Click to collapse
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
nandakalyan said:
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
Click to expand...
Click to collapse
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
tomblast66 said:
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
Click to expand...
Click to collapse
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
nandakalyan said:
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
Click to expand...
Click to collapse
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
tomblast66 said:
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
Click to expand...
Click to collapse
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
nandakalyan said:
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
Click to expand...
Click to collapse
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
tomblast66 said:
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
Click to expand...
Click to collapse
Oops! I am no techie, so am at the end of my wits, but thing I do suspect is a corrupted download, so if you can try downloading the file again from a stable connection and try is all I can think of. I've had this corrupted file thing quite a few times, so suggesting.
hi so my buddy honor 7 got semi brick after he tried to root , luckily twrp recovery still works so i flashed custom rom H7T B370 V10.1 AND IT WORKS FINE.
I WANT TO FLASH A STOCK ROM .
is there a safe way because im scared of this phone honestly i use to have htc senstation i change the rom every weekend lol. but with this one i need advice plzz
thnx
Hi, you are supposed to do a TWRP backup before flashing/ try to root, so just restore it.
Envoyé de mon PLK-L01 en utilisant Tapatalk
Theres no backup
You have to flash the files extracted from B371's UPDATE.APP, the files you need to flash are system.img, boot.img, cust.img, recovery.img
and after doing that, do the famous three button update with that UPDATE.APP only.
Hope this helps.
acesama said:
hi so my buddy honor 7 got semi brick after he tried to root , luckily twrp recovery still works so i flashed custom rom H7T B370 V10.1 AND IT WORKS FINE.
I WANT TO FLASH A STOCK ROM .
is there a safe way because im scared of this phone honestly i use to have htc senstation i change the rom every weekend lol. but with this one i need advice plzz
thnx
Click to expand...
Click to collapse
Unroot if he has root.
Extract System.img, Boot.img and Recovery.img from B370 and flash them manually.
How? Any tut pls
Szumy said:
How? Any tut pls
Click to expand...
Click to collapse
Follow below steps and you are good to go:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Szumy said:
How? Any tut pls
Click to expand...
Click to collapse
Go to SuperSU and in settings select full unroot.
Reboot the phone and check the unroot with some app you might have installed that requires root privileges.
Extract recovery.img from update.app file inside of B370 zip update file.
Install minimal ADB and fastboot in your PC
Install latest Google ADB driver
Reboot your PC.
Connect your H7 to PC.
Reboot H7 into fastboot mode.
Copy recovery.img to ADB fastboot folder in your PC.
Run ADB in your PC.
Run ADB commands:
fastboot devices - should reply with a device (yours)
fastboot flash recovery recovery.img
fastboot reboot
Copy the update.app from B370 zip file to a "dload" folder in your phone. Either in root of SDcard your root of phone.
Turn off phone.
Press simultaneously vol+- and power until you see any screen. Should be the update screen. It will update then reboot.
Factory reset and your done.
digigoon said:
follow below steps and you are good to go:
download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from update.app using huawei update extractor tool.
boot into bootloader mode by switching off the phone then pressing only the vol down button, and connecting it to pc simultaneously.
flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
after doing this put that very update.app from which you extracted the files in dload folder of your external sdcard.
switch off your phone, and press vol up + vol down + power button simultaneously.
your device will now get to the full stock firmware.
note: if the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e putting the update.app from which you extracted the files in dload folder of your external sdcard and pressing vol up + vol down + power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
thnx thats very helpful
@acesama
Awesome..!!
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Please boot into recovery, wipe cache and dalvik cache, reboot. It might take a bit longer to boot but if does not boot for 15, 20 minutes then you are in bootloop again.
Report back if that happens.
---------- Post added at 06:18 PM ---------- Previous post was at 06:15 PM ----------
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Did you flash the same firmware you had before or a different one?
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Probably because either of these:
1 - still using TWRP recovery - need to flash stock recovery.img
2 - corrupted boot.img - flash cust, boot, recovery and system img files from CURRENT B1xx or B3xx ROM update file.
DigiGoon said:
Follow below steps and you are good to go:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
Hey, im trying this method and im stuck at 5%. how long does the install usually take? Thanks in advance
ocali94 said:
Hey, im trying this method and im stuck at 5%. how long does the install usually take? Thanks in advance
Click to expand...
Click to collapse
A while, don't stress out and have to phone fully charged and/or connected to the charger. It can last like 20 minutes.
Hi i used this method and did everything how DigiGoon said, but with B390. No its stuck at 5% for the last two hours. should i stop the update?
Raleor said:
Hi i used this method and did everything how DigiGoon said, but with B390. No its stuck at 5% for the last two hours. should i stop the update?
Click to expand...
Click to collapse
have you solved the problem or need help?
Did you try the correct package.
Nice idea but I have no pc only twrp recovery please anyone have twrp backup ?
[email protected] said:
Nice idea but I have no pc only twrp recovery please anyone have twrp backup ?
Click to expand...
Click to collapse
Twrp backup of stock rom??
hassanjavaid8181 said:
Twrp backup of stock rom??
Click to expand...
Click to collapse
Sorry I not have twrp backup so plz I need twrp backup anyone share it to me thanks in advance
Problem already solved. Thanks!
Hi everyone, this is Sarry. I got my new huawei mate 9 pro on Wednesday this week, the version is LON-L29C636, I was trying to flash a custom ROM into the phone, but unfortunately I was too careless, flashed a different version ROM into it and cause immediate start up loop. As I finally boot into fastboot and twrp rec mode, I noticed that the computer won't recognize the USB portal of the device. So I went in eRecovery mode and tried to download an updated version but it failed to find any useful version.
Since mate 9 pro doesn't support SD card, I brought a USB-OTG cable and also usb type-c microSD adapter, when I connected the sd card to the phone, twrp reads the information, but when I tried to flash the update.zip file, it failed. I tried to copy the dload folder with update.app by twrp into phone storage, even if I got successful, the file just disappeared when i refresh the page. So now I don't have any idea on how to unbrick the phone, felt really bad.
Feel free to ask me any question or information needed, I really hope to unbrick the phone, I've been using huawei cellphone for more then 2 years and love it very much. Thanks for the help!!
Hello,
well the situation isn't that hard actually, you may just get the stock image and flash it from fastboot then start the custom rom installation from scratch.
what is the error number or statement?
EDIT: you will need huawei update extractor to pull out the img files and flash them through fastboot
Another Edit:
in the file path choose the update.app
you will need the following partitions:
Boot
System
Recovery
^select these then right click and press `extract selected` and flash them using the following commands:
1- fastboot devices > to check the device
2- fastboot flash boot boot.img
3- fastboot flash recovery recovery.img
4- fastboot flash system system.img
hope this helps you
good luck!
TheShadowMC said:
Hello,
well the situation isn't that hard actually, you may just get the stock image and flash it from fastboot then start the custom rom installation from scratch.
what is the error number or statement?
EDIT: you will need huawei update extractor to pull out the img files and flash them through fastboot
Another Edit:
in the file path choose the update.app
you will need the following partitions:
Boot
System
Recovery
^select these then right click and press `extract selected` and flash them using the following commands:
1- fastboot devices > to check the device
2- fastboot flash boot boot.img
3- fastboot flash recovery recovery.img
4- fastboot flash system system.img
hope this helps you
good luck!
Click to expand...
Click to collapse
Thank you so much for the help! The fastboot script isn't really working because when I tried to run it in cmd, it shows 'error can't find device', so I tried to flash the img files with twrp, the boot.img and recovery.img works well, but the system.img cannot be flashed, and the error message shows 'E:\cannot flash system.img'. I also tried to download the full version firmware and created dload folder in my SD card, copied UPDATE.APP into the folder, tried the 3 button force update, still nothing worked. Now the seller send me an Email said I can return the product, they are going to charge me for some ROM re installation fee.
However what error does it give during flashing system.IMG I would like to know, also as well as twrp custom ROM flashing?
Aquarius_2333 said:
Thank you so much for the help! The fastboot script isn't really working because when I tried to run it in cmd, it shows 'error can't find device', so I tried to flash the img files with twrp, the boot.img and recovery.img works well, but the system.img cannot be flashed, and the error message shows 'E:\cannot flash system.img'. I also tried to download the full version firmware and created dload folder in my SD card, copied UPDATE.APP into the folder, tried the 3 button force update, still nothing worked. Now the seller send me an Email said I can return the product, they are going to charge me for some ROM re installation fee.
Click to expand...
Click to collapse
well brother about the driver issue, sorry about being late, you must have downloaded the fastboot drivers and installed them.
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
sentavn said:
you should format by using fastboot. First download your stock ROM and extract with Huawei Firmware Extracter. Select UPDATE.APP and extract following files:
erecovery_kernel.img
erecovery_ramdisk.img
erecovery_vbmeta.img
cust.img
erecovery_vendor.img
kernel.img
ramdisk.img
recovery_vbmeta.img
recovery_vendor.img
system.img
Reboot your device in to fastboot mode (recovery mode) and flash those files one by one:
fastboot flash erecovery_kernel erecovery_kernel.img
...
fastboot flash system system.img
//
Erase your userdata space:
fastboot -w
//reboot
fastboot reboot
Now go to your stock recovery and do factory reset, wide cache.
Now your device back to stock OREO
Click to expand...
Click to collapse
Any Ideas?
HOW I FIXED:
I downloaded this EMUI 5 Nougat, Thanks to bozka1:
https://androidhost.ru/5SZ
I extracted UPDATE.APP file using Huawei Update Extractor.
I was trying to flash everything via fastboot: BOOT.img, RECOVERY.img, RECOVERY2.img, CUST.img, SYSTEM.img but nothing helped me.
I found out what you can flash via fastboot here:
https://forum.xda-developers.com/general/general/huawei-fastboot-commands-t3850123
There was no hope for me, so I tried to flash USERDATA.img
fastboot flash userdata USERDATA.img
Click to expand...
Click to collapse
And then cmd promped something unusual:
target reported max download size of 471859200 bytes
sending 'userdata' (24576 KB)...
OKAY [ 0.646s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.401s]
finished. total time: 2.049s
Click to expand...
Click to collapse
Then I proceeded to flash: BOOT.img, RECOVERY.img, RECOVERY2.img and CACHE.img
I didn't flash SYSTEM.img because I flashed it before like 1500 times.
My phone didn't work yet so I used the DLOAD method because RECOVERY finally worked, so I shut down the device and used three buttons combo:
First holding Volume Up, Volume Down and then pressing Power Button.
There is a documentation in the firmware I downloaded, SDcard must be in exFAT format.
Thank You bozka1.
voltzero2 said:
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
Any Ideas?
Click to expand...
Click to collapse
What is your original location, C461?
Which oeminfo you have flashed?
bozka1 said:
What is your original location, C461?
Which oeminfo you have flashed?
Click to expand...
Click to collapse
My original location is C432, I don't remember flashing any oeminfo
voltzero2 said:
My original location is C432, I don't remember flashing any oeminfo
Click to expand...
Click to collapse
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
bozka1 said:
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
Click to expand...
Click to collapse
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
voltzero2 said:
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
Click to expand...
Click to collapse
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
bozka1 said:
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
Click to expand...
Click to collapse
It says its unlucked:
https://imgur.com/a/LEDKWFr
I hope this link works
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
So I'll have to wait a little before I'll download Service ROM, my internet connection isn't the greatest, but I flashed Your TWRP and unfortunately it doesn't work;
If I hold the Power button and Volume Up - the same story as before, I see the loading TWRP screen and nothing happends,
If I let the device to boot up and then press only the Volume Up button - it says "Your device is booting up" and nothing happens.
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
EDIT:
I did some testing and Your TWRP doesn't boot at all on my device, I flashed another one, Catuva21 3.1.1 Nougat, and that is the one that I had before - it is booting but never loads.
voltzero2 said:
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
Click to expand...
Click to collapse
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
bozka1 said:
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
Click to expand...
Click to collapse
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
voltzero2 said:
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
Click to expand...
Click to collapse
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
bozka1 said:
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
Click to expand...
Click to collapse
Yeah, I've done it already, unfortunately nothing changed. How about BOOT.img? Can this influence something?
EDIT:
I also wonder about just following the steps in my first post, I've got UPDATE.APP for Oreo, but I don't know if it will only make it worse.
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
Do I have to install oeminfo to be able to use the "three buttons combo"? Because I tried it today and it doesn't work, phone is just stuck at "Your device is booting.." screen, guess I'm out of luck
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
voltzero2 said:
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
Click to expand...
Click to collapse
You're welcome
Hi help me
Bozka1
My huawei mate 10 lite is brick stock on erecovery what can i do now
Lj08 said:
My huawei mate 10 lite is brick stock on erecovery what can i do now
Click to expand...
Click to collapse
Hi, have you tried to do something with your phone? Can you provide some info?
voltzero2 said:
Hi, have you tried to do something with your phone? Can you provide some info?
Click to expand...
Click to collapse
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Lj08 said:
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Click to expand...
Click to collapse
Alright, so did it just happened randomly or did you tried to do something with your phone? Did you unlocked bootloader or flashed custom recovery etc? You need to explain what happened, that's quite important if you want someone to help you.