before i asked many people for fix but no correct solution is got but ( thanks for devs support). now i experimented and solved imei and efs partition currupted by qcn method
NOTE: ( third party qualcomm imei changing softwares will not work i tried many but no use)
steps
1. first download tools and install
2. go to qpst.exe in c:/programfiles/qualcomm/bin/qpst
3. now connect your phone open port by dialing(*#*#76937#*#) in stock
4. check whether qualcomm diagnostic port is enabled or not in device manager
5. if it shown enabled and device info its connected through diag port in qpst
6. now click software download and take backup of ur partition and save as (.qcn) and click on start it will read ur partition and
xx.qcn file will created(xx is any name)
7. now open hex editor search your imei number with [08xa] x is your starting digit of imei example(087a) for second imei click
find next option
8. now open your imei convertor and palce your imei and click convert
9. replace that converted imei in the form of hexadcimal replace with old imei same for second imei
10. important thing is while saving the file only by (save as) which is important if any mistake is happen we cant recover after
restoring in efs partition.
11. after saving again go to qpst npw go to restore option now click on start .
thats it! you got imei and signal:laugh::laugh::laugh:
i struggled 3 days for this to find correct way recover my ime
tools here
Let me answer but I'm not familiar with the subject, but I'm moving pretty well. Enter twrp. Definitely I would do a nice wipe is wipe date and clean everything. Then install Rom eui, connect the phone to the PC, take the zip file and copy it to the phone. After you go to the phone and search in sdcard the file you just put and flash zip files, restarting setup restarts and test.
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
Eventualmente prova installazione altre Rom non ufficiali
pierotundo said:
Let me answer but I'm not familiar with the subject, but I'm moving pretty well. Enter twrp. Definitely I would do a nice wipe is wipe date and clean everything. Then install Rom eui, connect the phone to the PC, take the zip file and copy it to the phone. After you go to the phone and search in sdcard the file you just put and flash zip files, restarting setup restarts and test.
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
Eventualmente prova installazione altre Rom non ufficiali
Click to expand...
Click to collapse
bro i tried with stock still getting no service
marshharsha said:
bro i tried with stock still getting no service
Click to expand...
Click to collapse
You try the stock firmware EUI already? Sometimes imei can restore by factory image...make sure your system/storage partition is clean; I experienced imei lost by flashing wrong modem before...and restore the original modem and it fixed the problem by twrp! U can also try flash the Steve mars 23S radio firmware (modem) and see if work or not, good luck!
sky104hk said:
You try the stock firmware EUI already? Sometimes imei can restore by factory image...make sure your system/storage partition is clean; I experienced imei lost by flashing wrong modem before...and restore the original modem and it fixed the problem by twrp! U can also try flash the Steve mars 23S radio firmware (modem) and see if work or not, good luck!
Click to expand...
Click to collapse
please give me link for the Steve mars 23S radio firmware (modem) thanks for the responce
Fix IMEI for Qualcomm devices
https://www.youtube.com/watch?v=JnGwLZTkMz0
Flash this from Recovery:
http://www25.zippyshare.com/v/oWD1dliJ/file.html
Let me know.:good:
https://www.amazon.es/clouddrive/sh...ncoding=UTF8&mgh=1&ref_=cd_ph_share_link_copy
Download it and flash via Twrp, good luck
fastboot erase modemst1
fastboot erase modemst2
Don't these commands work anymore to fix pretty much everything NVRAM-related?
Hi it tried the qpst but it shows Disk Error while writing to file.
---------- Post added at 03:40 PM ---------- Previous post was at 03:22 PM ----------
sky104hk said:
https://www.amazon.es/clouddrive/sh...ncoding=UTF8&mgh=1&ref_=cd_ph_share_link_copy
Download it and flash via Twrp, good luck
Click to expand...
Click to collapse
is this work on leeco le2 x526 Indian ?
priyabrata12345 said:
Hi it tried the qpst but it shows Disk Error while writing to file.
---------- Post added at 03:40 PM ---------- Previous post was at 03:22 PM ----------
is this work on leeco le2 x526 Indian ?
Click to expand...
Click to collapse
It's totally different model or you want to have a hardbrick...
Flash an official firmware instead.
priyabrata12345 said:
Hi it tried the qpst but it shows Disk Error while writing to file.
---------- Post added at 03:40 PM ---------- Previous post was at 03:22 PM ----------
is this work on leeco le2 x526 Indian ?
Click to expand...
Click to collapse
Flash my zip efsfix.zip, it work on s2 to.
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
Thank you but can you please share the complete rom ? Please......
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
it asking for password
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
Thanks it works and after flashing stock eui from using flash one
hello
i have not any qcn file but i have imiei on phone box . how can repair it? can i build a qcn file with my imiei numbers? my phone baseband is unknown too . may the phone have hardware problem? can i change baseband hardware part ? what is this hardware name ?
thank you very much
have the same problem?nothimg to help us?
please,i have restore imei,.but maid is 0000000000 and not have network...leeco x821 with stock indian firmware
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
this one messed my data radio what the heck
Hi guys,i need qcn file for x821
Any help?
Stock rom Indian 19s
Tnx in advance
marshharsha said:
before i asked many people for fix but no correct solution is got but ( thanks for devs support). now i experimented and solved imei and efs partition currupted by qcn method
NOTE: ( third party qualcomm imei changing softwares will not work i tried many but no use)
steps
1. first download tools and install
2. go to qpst.exe in c:/programfiles/qualcomm/bin/qpst
3. now connect your phone open port by dialing(*#*#76937#*#) in stock
4. check whether qualcomm diagnostic port is enabled or not in device manager
5. if it shown enabled and device info its connected through diag port in qpst
6. now click software download and take backup of ur partition and save as (.qcn) and click on start it will read ur partition and
xx.qcn file will created(xx is any name)
7. now open hex editor search your imei number with [08xa] x is your starting digit of imei example(087a) for second imei click
find next option
8. now open your imei convertor and palce your imei and click convert
9. replace that converted imei in the form of hexadcimal replace with old imei same for second imei
10. important thing is while saving the file only by (save as) which is important if any mistake is happen we cant recover after
restoring in efs partition.
11. after saving again go to qpst npw go to restore option now click on start .
thats it! you got imei and signal:laugh::laugh::laugh:
i struggled 3 days for this to find correct way recover my ime
tools here
Click to expand...
Click to collapse
hi,i do exactly as you said,but no service
i have base band and imei ,but no service, i need a x821 qcn file
even i have qfil and then do as u said,but didnt work again
help pls
Related
Hi. a few days ago i flash my phone and brick it, but before i make a backup with droid tools, when i restore my phone with sp flashtools my baseband is missing and no radio... no service signal. cant writte imei cuz radio is missing...
how can i flash baseband and where can i find it...
i download some roms but no works flashing secro.img or nodl.secro... is something i can do to recover my signal and my baseband.
i try with sn writte, with mtk droid, with cmd replacing MB001... and no works if i dont have baseband obviously..
please helpme.
2 days try it tp unbrick the phone, now its unbricked but no signal...
where can i find the baseband and whats the name of the file.. please.
leo_hacker82 said:
Hi. a few days ago i flash my phone and brick it, but before i make a backup with droid tools, when i restore my phone with sp flashtools my baseband is missing and no radio... no service signal. cant writte imei cuz radio is missing...
how can i flash baseband and where can i find it...
i download some roms but no works flashing secro.img or nodl.secro... is something i can do to recover my signal and my baseband.
i try with sn writte, with mtk droid, with cmd replacing MB001... and no works if i dont have baseband obviously..
please helpme.
2 days try it tp unbrick the phone, now its unbricked but no signal...
where can i find the baseband and whats the name of the file.. please.
Click to expand...
Click to collapse
Same with me, Helpz ...Please
---------- Post added at 01:10 PM ---------- Previous post was at 01:08 PM ----------
[/COLOR]change the modem.img
best is to go to service center they will do its very hard work and too time....
i also suffered with this problem....
deathviper said:
---------- Post added at 01:10 PM ---------- Previous post was at 01:08 PM ----------
[/COLOR]change the modem.img
best is to go to service center they will do its very hard work and too time....
i also suffered with this problem....
Click to expand...
Click to collapse
can you give me modem.img? i try it from my backup but not work
its in ur stock rom
how can i change the modem.img just replace on system? i kake that before but no works... and i cant put my phone in meta mode.... that sucks.. i dont have a repair center im froim Mexico LOL here we dont have repair center to chinese phones..lol..any ideas?
any local shop or find any mobile chip engineer he can help u........
1. if you know use flashtool,just re-flash 4 file preloader,uboot,secro,userdata,you will have baseband again but still null imei,just flash it nvram and done :victory:
2. if it still not solve your problem,please download this file,extract it and you will have 2 file,copy it to folder 'BackupNVRAM' in 'MTKDroidTool',use newest version of MTKDroidTool (ver 2.5.2),it allow you restore nvram and will resolved your problem
sisuke said:
Same with me, Helpz ...Please
Click to expand...
Click to collapse
solution
try to flash
protect_f.img
protect_s.img
secro.bin
nvram.bin
by modifying scatter file by writing img in file name and true instead of false.
after that your mobile will be back with imei and baseband
billy_cater said:
1. if you know use flashtool,just re-flash 4 file preloader,uboot,secro,userdata,you will have baseband again but still null imei,just flash it nvram and done :victory:
2. if it still not solve your problem,please download this file,extract it and you will have 2 file,copy it to folder 'BackupNVRAM' in 'MTKDroidTool',use newest version of MTKDroidTool (ver 2.5.2),it allow you restore nvram and will resolved your problem
Click to expand...
Click to collapse
Hey bro thank u very much...the 2nd option worked for me...thank you very much..!!
help
android_digger said:
Hey bro thank u very much...the 2nd option worked for me...thank you very much..!!
Click to expand...
Click to collapse
bro can you help me too. please send me what you used to rivive your baseband and imei i dont have backup of mine...please.
i cant use my phone because its baseband also missing. i need rom what you used.
slasher122991 said:
bro can you help me too. please send me what you used to rivive your baseband and imei i dont have backup of mine...please.
i cant use my phone because its baseband also missing. i need rom what you used.
Click to expand...
Click to collapse
Bro...follow step by step info...u will win !!
billy_cater said:
2. if it still not solve your problem,please download this file,extract it and you will have 2 file,copy it to folder 'BackupNVRAM' in 'MTKDroidTool',use newest version of MTKDroidTool (ver 2.5.2),it allow you restore nvram and will resolved your problem
Click to expand...
Click to collapse
Your backup worked perfectly! Thank you a lot!
does this work with Lenovo P780 8GB ROW Mediatek MT6589?
Thank you
Thank you...u billy_cater saved me.service centre couldn't solve the problem.
Does not work to me
I Tried both. Number 1 does not work.
Number 2 I get an error in MTK Droid.
--- root shel it is received temporarily before reboot !
--- ERROR pttycmd1 device NOT found!
--- \dev\nvram install
--- \data\nvram install
Can you help me with that error
First, I'd like to thanks to @billy_cater.
The 2nd method is works perfectly.
To all XDALovers who faced some issue, please download all necessary files, and then try this step by step:
1. Copy *.bin and *.tar to folder *\Mtk_Droid_Tool_v2.5.x\BackupNVRAM. Then Open MTK Droid Tools.
2. Turn on your phone, connect your phone via usb cable. MTK Droid Tools shows Yellow Sign
3. Click Root. After finished MTK Droid Tools shows Green Sign.
4. Click IMEI/NVRAM. New window should opened.
5. Click Restore. Then Choose *.bin and *.tar you've been downloaded before.
After complete, Baseband and imei should successfully written on your device.
6. Click IMEI/NVRAM again, hen change imei according to your original imei.
7. Click Reboot. Done.
Regards,
Please CMIIW.
Sorry for my bad English, I'm Indonesian.
worked
Is the nvram.bin for any mediatek device?
Kinda urgent haha:silly:
I don't have access to the file please,am stuck here
Hi
please help me.
after change rom my phone (Lenovo P780) can not detect SIM and in version info Baseband is Unknown.
I trying to update modem.img but it's not solve my problem and also try diffrent version of stock rom.
amirmohsenian said:
Hi
please help me.
after change rom my phone (Lenovo P780) can not detect SIM and in version info Baseband is Unknown.
I trying to update modem.img but it's not solve my problem and also try diffrent version of stock rom.
Click to expand...
Click to collapse
Hi,
to resolve this issue u need
1. Root your device
2. download mtk droid tool
3.connect your device in usb debugging mode
4. when your device show connected on mtk droid tool
5. go imei/ nvram option
6. change imei no( write down imei no on paper from printed mobile battery). and click on replace.
7. Reboot your device from mtk droid tool.
dont forget to keep the back up of your device imei no. from mtk droid tool for future.
Hope it works for you. It worked so many time for me.
amirmohsenian said:
Hi
please help me.
after change rom my phone (Lenovo P780) can not detect SIM and in version info Baseband is Unknown.
I trying to update modem.img but it's not solve my problem and also try diffrent version of stock rom.
Click to expand...
Click to collapse
My phone also encounted the same problem after flashing Custom ROM from needrom.com. Did you make a full backup of your phone? If not then it's too bad and you might need to sent your phone back to service center.
You can try this link for tutorial and see if it works to recover your IMEI and baseband, if not your last resolution is send back to service center.
http://lenovop780en.blogspot.ro/2014/01/faq.html
And after your phone back from servicing, next time remember make a full backup incase anything goes wrong. Post #3
http://forum.xda-developers.com/showthread.php?t=2648309
amitritu_1509 said:
Hi,
to resolve this issue u need
1. Root your device
2. download mtk droid tool
3.connect your device in usb debugging mode
4. when your device show connected on mtk droid tool
5. go imei/ nvram option
6. change imei no( write down imei no on paper from printed mobile battery). and click on replace.
7. Reboot your device from mtk droid tool.
dont forget to keep the back up of your device imei no. from mtk droid tool for future.
Hope it works for you. It worked so many time for me.
Click to expand...
Click to collapse
==============================================================================
Hi,
I did all the steps, but without results., And other versions of the modem was installed but not properly
Please Help Me.
Deleted.
amirmohsenian said:
==============================================================================
Hi,
I did all the steps, but without results., And other versions of the modem was installed but not properly
Please Help Me.
Click to expand...
Click to collapse
Hi,
I think u need to flash your rom once again.
Use flash tool to install the same.
But before that connect your phone
and go to format- format whole flash-ok.
For this u need to select the scatter file from your firmware.
After this download your firmware( not firmware upgrade)
also click on check box for D/L.
After flashing new firmware you need to use above steps which I described earlier.
Good help you.
---------- Post added at 03:50 PM ---------- Previous post was at 03:42 PM ----------
amitritu_1509 said:
Hi,
I think u need to flash your rom once again.
Use flash tool to install the same.
But before that connect your phone
and go to format- format whole flash-ok.
For this u need to select the scatter file from your firmware.
After this download your firmware( not firmware upgrade)
also click on check box for D/L.
After flashing new firmware you need to use above steps which I described earlier.
Good help you.
Click to expand...
Click to collapse
Hi,
I just got a site for the IMEI repair.
Giving u the link.
I hope u get the solution form here.
http://en.miui.com/thread-10061-1-1.html
amirmohsenian said:
Hi
please help me.
after change rom my phone (Lenovo P780) can not detect SIM and in version info Baseband is Unknown.
I trying to update modem.img but it's not solve my problem and also try diffrent version of stock rom.
Click to expand...
Click to collapse
Hi I wonder have you resolved your issue or not? Actually I found a consider temporary solution.
With your phone rooted, using any root explorer, navigate to /data and copy the nvram folder to your memory card (as a backup). Then delete the whole nvram folder in /data. Wait a while, your phone should have signal and baseband already. If works let me know, I will tell you what to do next step.
Hi, I repass two phones in one, can not find a signal. I do not know what is meant by this icon:
Please, do not know where is the mistake? thank you
javi.cz said:
Hi, I repass two phones in one, can not find a signal. I do not know what is meant by this icon:
Please, do not know where is the mistake? thank you
Click to expand...
Click to collapse
Try to flash another modem software from here!
Use the Europa modems!
stympy said:
Try to flash another modem software from here!
Use the Europa modems!
Click to expand...
Click to collapse
I forgot to add that it is a phone P770. Will it work well?
javi.cz said:
I forgot to add that it is a phone P770. Will it work well?
Click to expand...
Click to collapse
Nope.
Here are some modems for your phone !
Nothing happened. Have I tried all the options and here I still have the icon there
javi.cz said:
Nothing happened. Have I tried all the options and here I still have the icon there
Click to expand...
Click to collapse
u can use others nvram backup file .
I also lost my IMEI and others . I got nvram backup file from Google and my P780 can work .
But I still want use my own IMEI
xdad_g said:
u can use others nvram backup file .
I also lost my IMEI and others . I got nvram backup file from Google and my P780 can work .
But I still want use my own IMEI
Click to expand...
Click to collapse
Still does not work, there is still the icon ..
javi.cz said:
Still does not work, there is still the icon ..
Click to expand...
Click to collapse
Try to insert your SIM Cards a little harder ! This is happent to a friend!
Orrr.. look on the inside of SIM Slots and see iff your pins are there !
I do not know what you mean. SIM is inserted all the way
javi.cz said:
I do not know what you mean. SIM is inserted all the way
Click to expand...
Click to collapse
okkkk.... what phone is that ? p770?
What ROM did you flashed ?
What did you want to do ?
How to restore lost serial and product number,?
stympy said:
okkkk.... what phone is that ? p770?
What ROM did you flashed ?
What did you want to do ?
Click to expand...
Click to collapse
yes P770. Yes flashed. I need advice to functional
javi.cz said:
yes P770. Yes flashed. I need advice to functional
Click to expand...
Click to collapse
What happent to your phone?
Sent from my Lenovo P780
i recently followed this thread to unlock the bootloader and install a custom recovery everything went okay but whenever i install any ROM i don't get WiFi even the ones that says "stock".
my recovery is Carliv MTK CWM-Based v6.0.4.4
I didn't take a backup from my old ROM because it was corrupted and i thought that a ROM that says "stock" on xda will be the same.
Please Please help, my tablet is useless without WiFi
Hi try to flash other rom or stock firmwear ( it's rom error )
NileshSolanki04 said:
Hi try to flash other rom or stock firmwear ( it's rom error )
Click to expand...
Click to collapse
i tried over 5 ROMs and there's not much ROMs for this device out there, i think it's because something else
McLovin01 said:
i tried over 5 ROMs and there's not much ROMs for this device out there, i think it's because something else
Click to expand...
Click to collapse
Try to flash stock firmwear
Can you post screen shot
NileshSolanki04 said:
Try to flash stock firmwear
Can you post screen shot
Click to expand...
Click to collapse
screenshot of what?
when i press toggle the wifi/bluetooth button it goes on and off again in a second
mac address under wifi -> advanced is "unavailable"
McLovin01 said:
screenshot of what?
when i press toggle the wifi/bluetooth button it goes on and off again in a second
mac address under wifi -> advanced is "unavailable"
Click to expand...
Click to collapse
Just follow below step
---------- Post added at 07:24 AM ---------- Previous post was at 07:20 AM ----------
NileshSolanki04 said:
Just follow below step
Click to expand...
Click to collapse
i think your reply is missing something
That is most likely a kernel issue. The missing Mac says that the efs got corrupted. This is a known issue when messing with mtk devices and part of the reason they are nor advised to mess with.
You could try doing full a complete stock install and relocate the bootloader. (some devices have safety protocols that break things when unlocking the bootloader)
Your best bet is to pull a log of trying to turn it on and that will tell you what you need to know. Should have been the first thing you did really.
NileshSolanki04 said:
Just follow below step
---------- Post added at 07:24 AM ---------- Previous post was at 07:20 AM ----------
Click to expand...
Click to collapse
go to data/misc/wifi (required root)
-backup file wpa_supplicant.conf in this folder which contains usename and password wifi
- delete all file in this folder
- turn on wifi ( if you careful, you can reboot )
- now you can connect to wifi
- recovery file wpa_supplicant.conf
First Make Nandroid Backup
I need these files please if somebody can share:
- modemst1 - modemst2 - fsg
Due to a kake ROM now I have corrupted my EFS partition and need those files to bring alive my device. Please help.
I have found MEE7 files in the web but I guess don't have to use on my phone.
Please, somebody with MEG7 can help me? I will be very glad to buy him a beer.
Hey there! I'm not currently at home now, but I can give you a direct link to NEGMIFA Rom(for Global Version phones), you can extract files you need by yourself.
Download_V9.5.11.0.NEGMIFA (as you can see, its an old version)
OR you can download_fastboot_ROM, and flash it with MiFlashTool, it should solve your problems.
Have a nice day.
P.S. If you cant download something by any reason, I'll make a mirror on googledrive or other filehost in an hour or two when I get at home.
I read somewhere that modemst1 and modemst2 contain IMEI so the rom doesn't have those files.
Fsg is also related to IMEI
Well, as far as I understand your phone not working at all, correct me if I wrong. So my algorithm to make it work is to flash it first(fastboot), doesnt matter with or without your IMEI(I think it'll be 0000), then you can search on xda or whatever, there was a bunch of threads with IMEI "problems", I'm sure you can find the right one.
Have a nice day.
Dunaldo said:
Well, as far as I understand your phone not working at all, correct me if I wrong. So my algorithm to make it work is to flash it first(fastboot), doesnt matter with or without your IMEI(I think it'll be 0000), then you can search on xda or whatever, there was a bunch of threads with IMEI "problems", I'm sure you can find the right one.
Have a nice day.
Click to expand...
Click to collapse
Hi Dunaldo, thanks for your time.
Currently my phone is working on official miui 10 developer rom, it was bricked until I could open the bootloader and install twrp.
Now, the problems I have are:
1.- Baseband "UNKNOW"
2.- When I digit *#06# on the dialer: "UNABLE TO GET IMEI"
So I was reading a lot in the forums, and ,my conclusion is: I have corrupted the EFS partition or probably I lost it, then I need first to solve the "baseband" problem, for that I need the modemst1 - modemst2 - fsg files of my exactly device model and then I can get back mi unique IMEI.
By the way do you have the MEG7 model?
And thanks for your suggestion about flashing fastboot rom, I will try once more, don't think will resolve the efs problem but I'll try anyway.
I have the same problem & i have used the files ur looking for but everytime i restart the phone my baseband again becomes unknown ?? if u want i can give u the file link tomorrow but its no use
Search Qcn file in google for your model . restore it using QPST and write your imei thats all tested MEI7 works perfectly
Any solution?
Heros King said:
I have the same problem & i have used the files ur looking for but everytime i restart the phone my baseband again becomes unknown if u want i can give u the file link tomorrow but its no use
Click to expand...
Click to collapse
Hi,heros
Did u find a solution for this problem?
I tried qpst and qfil and imei is restored but if i restart again ,baseband become unkown again.
If u find anything please help me out i've been stuck in this for almost 3 months
download QualcommIMEIRebuilder and replace yuore ime and inject in qcn file. and use qcfire flash qcn file.
thanks
Dunaldo said:
Hey there! I'm not currently at home now, but I can give you a direct link to NEGMIFA Rom(for Global Version phones), you can extract files you need by yourself.
Download_V9.5.11.0.NEGMIFA (as you can see, its an old version)
OR you can download_fastboot_ROM, and flash it with MiFlashTool, it should solve your problems.
Have a nice day.
P.S. If you cant download something by any reason, I'll make a mirror on googledrive or other filehost in an hour or two when I get at home.
Click to expand...
Click to collapse
thank you . you save my device
mansoor_hana said:
thanks
thank you . you save my device
Click to expand...
Click to collapse
Hey there! I hope you are doing well. Could you please tell me the process? I am be so glad if I can recover this phone. I have similar issues like you.
After unlock, i always do a full backup of all block partitions. It saves many issues
I'm having trouble with the LG V30 H930DS. My phone is missing baseband unknown. imei null. and no s / n. i tried to flash some firmware and tried to flash it with qfil but no improvement in my phone. if anyone can provide a solution for my phone
Sorry, my English is bad. please understand
muhibbuddin irsyad said:
I'm having trouble with the LG V30 H930DS. My phone is missing baseband unknown. imei null. and no s / n. i tried to flash some firmware and tried to flash it with qfil but no improvement in my phone. if anyone can provide a solution for my phone
Sorry, my English is bad. please understand
Click to expand...
Click to collapse
It sounds like you -- or someone -- used Chip Erase in Dev Patched LGUP, against all warnings posted in this forum. Good luck.
ChazzMatt said:
It sounds like you -- or someone -- used Chip Erase in Dev Patched LGUP, against all warnings posted in this forum. Good luck.
Click to expand...
Click to collapse
I did not select partition dl when doing crosflash. and I'm having trouble with baseband
muhibbuddin irsyad said:
I did not select partition dl when doing crosflash. and I'm having trouble with baseband
Click to expand...
Click to collapse
Read what I wrote. I didn't say anything about Partition DL. I said you or someone used Chip Erase.
That erases IMEI and Serial number.
ChazzMatt said:
Read what I wrote. I didn't say anything about Partition DL. I said you or someone used Chip Erase.
That erases IMEI and Serial number.
Click to expand...
Click to collapse
i have erase the chip but luckily imei = 0 and the phone is still normal
---------- Post added at 12:28 AM ---------- Previous post was at 12:24 AM ----------
muhibbuddin irsyad said:
I'm having trouble with the LG V30 H930DS. My phone is missing baseband unknown. imei null. and no s / n. i tried to flash some firmware and tried to flash it with qfil but no improvement in my phone. if anyone can provide a solution for my phone
Sorry, my English is bad. please understand
Click to expand...
Click to collapse
try unlocking bootloader and flash rom cook or kdz rom in other regions.
---------- Post added at 12:33 AM ---------- Previous post was at 12:28 AM ----------
I was in a very desperate situation just like you. The only difference is that my phone is bricked with a logo. LGup does not recognize the device via COM port. fortunately I have unlocked the bootloader and used the command "fastboot oem edl" to bring the device to the EDL qualcom 9008. I use qfil flash some partitions such as boot, recovery, .... and luckily LGup got the device via COM port and I can KDZ return to the default original rom. Someone quoted me for more than 10 bucks but I didn't have that much money and I successfully unbrick.