Related
So lg released the unlock tool for lg v10 europe market
I have the czech lg v10 H960A but i live in middle east
I registred and enter the serial number and device serial
When i press unlock bootloader there is a popup that say servics unavailable please contact site administrator .....
Any idea about the problem?
I tried many times from many browsers with no luck
the problem is solved
vip57 said:
the problem is solved
Click to expand...
Click to collapse
So now we can root h960a with android 6 ?
rowihel2012 said:
So now we can root h960a with android 6 ?
Click to expand...
Click to collapse
Yes you can
You can view the steps in this link
http://forum.xda-developers.com/lg-v10/development/recovery-twrp-v3-0-2-0-unofficial-t3387783
vip57 said:
Yes you can
You can view the steps in this link
http://forum.xda-developers.com/lg-v10/development/recovery-twrp-v3-0-2-0-unofficial-t3387783
Click to expand...
Click to collapse
You must be on newest stock Marshmallow: H960A20a_00_0316.kdz
what that mean ? means the android 6 ?
rowihel2012 said:
You must be on newest stock Marshmallow: H960A20a_00_0316.kdz
what that mean ? means the android 6 ?
Click to expand...
Click to collapse
Sorry i don't know i unlocked the bootloader only didn't root yet you need to ask from the thread
It is for sure android 6 but i don't know if you need to be on a specific build
vip57 said:
Sorry i don't know i unlocked the bootloader only didn't root yet you need to ask from the thread
It is for sure android 6 but i don't know if you need to be on a specific build
Click to expand...
Click to collapse
The build version should be MRA58K. It's the latest/only build for Android 6/MM which is available for the european version of the V10 (AFAIK) where the bootloader can be unlocked. If you updated your phone via LG Bridge you can be fairly sure the installation of TWRP works.
cyvr1 said:
The build version should be MRA58K. It's the latest/only build for Android 6/MM which is available for the european version of the V10 (AFAIK) where the bootloader can be unlocked. If you updated your phone via LG Bridge you can be fairly sure the installation of TWRP works.
Click to expand...
Click to collapse
i have h960a with MRA58K :good:
rowihel2012 said:
i have h960a with MRA58K :good:
Click to expand...
Click to collapse
Then go for it. :laugh:
But make sure you follow the steps mentioned on the page linked above.
You will not brick your phone if you don't but perform a factory reset and loose all data.
Maybe do a backup on a micro SD card prior to trying to flash TWRP.
If you have not unlocked your bootloader yet you need definitely need to backup your data as the bootloader unlock will also perform a factory reset.
vip57 said:
the problem is solved
Click to expand...
Click to collapse
why cant enter bootloader
after
adb reboot boatloader
phone reboot to soft
---------- Post added at 03:55 PM ---------- Previous post was at 03:49 PM ----------
cyvr1 said:
Then go for it. :laugh:
But make sure you follow the steps mentioned on the page linked above.
You will not brick your phone if you don't but perform a factory reset and loose all data.
Maybe do a backup on a micro SD card prior to trying to flash TWRP.
If you have not unlocked your bootloader yet you need definitely need to backup your data as the bootloader unlock will also perform a factory reset.
Click to expand...
Click to collapse
after adb reboot boatloader phone reboots to software not bootloader
how to fix this?
rowihel2012 said:
why cant enter bootloader
after
adb reboot boatloader
phone reboot to soft
---------- Post added at 03:55 PM ---------- Previous post was at 03:49 PM ----------
after adb reboot boatloader phone reboots to software not bootloader
how to fix this?
Click to expand...
Click to collapse
If you really typed "adb reboot boatloader" it is not surprising that the phone reboots because the parameter "boatloader" is unknown. The command executed by the phone is then "adb reboot".
"adb reboot bootloader" should solve the problem.
if "boatloader" is just a typo (though you typed it twice) check if "USB debugging" in the developer options is really enabled. Maybe disable and enable it again.
One other thing I forgot and it is not mentioned in the LG tutorial for unlocking the bootloader if I remember correctly:
I needed to enable the option "Allow OEM unlock" under developer options to be able to perform the unlock command with the unlock.bin file received by mail from LG. After the unlock is done and the phone rebooted disable this option again. Otherwise the fingerprint sensor is not working correctly. you can register fingerprints but not unlock your phone with it.
cyvr1 said:
If you really typed "adb reboot boatloader" it is not surprising that the phone reboots because the parameter "boatloader" is unknown. The command executed by the phone is then "adb reboot".
"adb reboot bootloader" should solve the problem.
if "boatloader" is just a typo (though you typed it twice) check if "USB debugging" in the developer options is really enabled. Maybe disable and enable it again.
Click to expand...
Click to collapse
i did that
adb reboot bootloader
---------- Post added at 04:11 PM ---------- Previous post was at 04:09 PM ----------
now
adb reboot bootloader
rebooted to soft
vip57 said:
the problem is solved
Click to expand...
Click to collapse
cant enter bootloader do you know why?
I've a H960A, but when I try to update the phone, LG bridge provides me the new version H96020a and says that my model number is h960! (without "A") Does it mean, that I can not unlock the bootloader?
bangkokguy said:
I've a H960A, but when I try to update the phone, LG bridge provides me the new version H96020a and says that my model number is h960! (without "A") Does it mean, that I can not unlock the bootloader?
Click to expand...
Click to collapse
if you are sure 100% that your phone is H 960A it will never be changes after update
bangkokguy said:
I've a H960A, but when I try to update the phone, LG bridge provides me the new version H96020a and says that my model number is h960! (without "A") Does it mean, that I can not unlock the bootloader?
Click to expand...
Click to collapse
Open the phone settings / About phone / Hardware info. What model number is shown there?
If it is in fact a H960 (without A) you can't unlock the bootloader.
Also there seem to be some problems with the H960A for some users. Meanwhile I suspect that those are phones which were not meant to be sold in Europe but somehow found their way here. Therefore some internal flag might prevent those phones from booting into bootloader / fastboot mode.
H960 in android 5.1, H960A in 6.0
bangkokguy said:
I've a H960A, but when I try to update the phone, LG bridge provides me the new version H96020a and says that my model number is h960! (without "A") Does it mean, that I can not unlock the bootloader?
Click to expand...
Click to collapse
vip57 said:
if you are sure 100% that your phone is H 960A it will never be changes after update
Click to expand...
Click to collapse
again a late reply, but for followers :
I also have a (32GB) H960A (bought from a german store), now unlocked and rooted.
The model number shown in settings when still in android 5.1 was also : Model : LG-H960
It's only after succesfull update (with LG Bridge) that the model shown in the settings became LG-H960A...
edit : I notice now that it is still detected as H960 by some
tools :
oleg77 said:
again a late reply, but for followers :
I also have a (32GB) H960A (bought from a german store), now unlocked and rooted.
The model number shown in settings when still in android 5.1 was also : Model : LG-H960
It's only after succesfull update (with LG Bridge) that the model shown in the settings became LG-H960A...
edit : I notice now that it is still detected as H960 by some
tools :
Click to expand...
Click to collapse
Hi.. Did u manage to solve your problem? We both have the same one..
I don't see this as a problem : the model is well H960A, it's just shortened in the set up menu. If you have a 32GB model, I don't think you could get something else.
I'm pleased to get it rooted, but sad to see so few development because of LG reluctance to let the community work on it.
before i asked many people for fix but no correct solution is got but ( thanks for devs support). now i experimented and solved imei and efs partition currupted by qcn method
NOTE: ( third party qualcomm imei changing softwares will not work i tried many but no use)
steps
1. first download tools and install
2. go to qpst.exe in c:/programfiles/qualcomm/bin/qpst
3. now connect your phone open port by dialing(*#*#76937#*#) in stock
4. check whether qualcomm diagnostic port is enabled or not in device manager
5. if it shown enabled and device info its connected through diag port in qpst
6. now click software download and take backup of ur partition and save as (.qcn) and click on start it will read ur partition and
xx.qcn file will created(xx is any name)
7. now open hex editor search your imei number with [08xa] x is your starting digit of imei example(087a) for second imei click
find next option
8. now open your imei convertor and palce your imei and click convert
9. replace that converted imei in the form of hexadcimal replace with old imei same for second imei
10. important thing is while saving the file only by (save as) which is important if any mistake is happen we cant recover after
restoring in efs partition.
11. after saving again go to qpst npw go to restore option now click on start .
thats it! you got imei and signal:laugh::laugh::laugh:
i struggled 3 days for this to find correct way recover my ime
tools here
Let me answer but I'm not familiar with the subject, but I'm moving pretty well. Enter twrp. Definitely I would do a nice wipe is wipe date and clean everything. Then install Rom eui, connect the phone to the PC, take the zip file and copy it to the phone. After you go to the phone and search in sdcard the file you just put and flash zip files, restarting setup restarts and test.
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
Eventualmente prova installazione altre Rom non ufficiali
pierotundo said:
Let me answer but I'm not familiar with the subject, but I'm moving pretty well. Enter twrp. Definitely I would do a nice wipe is wipe date and clean everything. Then install Rom eui, connect the phone to the PC, take the zip file and copy it to the phone. After you go to the phone and search in sdcard the file you just put and flash zip files, restarting setup restarts and test.
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
Eventualmente prova installazione altre Rom non ufficiali
Click to expand...
Click to collapse
bro i tried with stock still getting no service
marshharsha said:
bro i tried with stock still getting no service
Click to expand...
Click to collapse
You try the stock firmware EUI already? Sometimes imei can restore by factory image...make sure your system/storage partition is clean; I experienced imei lost by flashing wrong modem before...and restore the original modem and it fixed the problem by twrp! U can also try flash the Steve mars 23S radio firmware (modem) and see if work or not, good luck!
sky104hk said:
You try the stock firmware EUI already? Sometimes imei can restore by factory image...make sure your system/storage partition is clean; I experienced imei lost by flashing wrong modem before...and restore the original modem and it fixed the problem by twrp! U can also try flash the Steve mars 23S radio firmware (modem) and see if work or not, good luck!
Click to expand...
Click to collapse
please give me link for the Steve mars 23S radio firmware (modem) thanks for the responce
Fix IMEI for Qualcomm devices
https://www.youtube.com/watch?v=JnGwLZTkMz0
Flash this from Recovery:
http://www25.zippyshare.com/v/oWD1dliJ/file.html
Let me know.:good:
https://www.amazon.es/clouddrive/sh...ncoding=UTF8&mgh=1&ref_=cd_ph_share_link_copy
Download it and flash via Twrp, good luck
fastboot erase modemst1
fastboot erase modemst2
Don't these commands work anymore to fix pretty much everything NVRAM-related?
Hi it tried the qpst but it shows Disk Error while writing to file.
---------- Post added at 03:40 PM ---------- Previous post was at 03:22 PM ----------
sky104hk said:
https://www.amazon.es/clouddrive/sh...ncoding=UTF8&mgh=1&ref_=cd_ph_share_link_copy
Download it and flash via Twrp, good luck
Click to expand...
Click to collapse
is this work on leeco le2 x526 Indian ?
priyabrata12345 said:
Hi it tried the qpst but it shows Disk Error while writing to file.
---------- Post added at 03:40 PM ---------- Previous post was at 03:22 PM ----------
is this work on leeco le2 x526 Indian ?
Click to expand...
Click to collapse
It's totally different model or you want to have a hardbrick...
Flash an official firmware instead.
priyabrata12345 said:
Hi it tried the qpst but it shows Disk Error while writing to file.
---------- Post added at 03:40 PM ---------- Previous post was at 03:22 PM ----------
is this work on leeco le2 x526 Indian ?
Click to expand...
Click to collapse
Flash my zip efsfix.zip, it work on s2 to.
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
Thank you but can you please share the complete rom ? Please......
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
it asking for password
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
Thanks it works and after flashing stock eui from using flash one
hello
i have not any qcn file but i have imiei on phone box . how can repair it? can i build a qcn file with my imiei numbers? my phone baseband is unknown too . may the phone have hardware problem? can i change baseband hardware part ? what is this hardware name ?
thank you very much
have the same problem?nothimg to help us?
please,i have restore imei,.but maid is 0000000000 and not have network...leeco x821 with stock indian firmware
andr68rus said:
Flash my zip efsfix.zip, it work on s2 to.
Click to expand...
Click to collapse
this one messed my data radio what the heck
Hi guys,i need qcn file for x821
Any help?
Stock rom Indian 19s
Tnx in advance
marshharsha said:
before i asked many people for fix but no correct solution is got but ( thanks for devs support). now i experimented and solved imei and efs partition currupted by qcn method
NOTE: ( third party qualcomm imei changing softwares will not work i tried many but no use)
steps
1. first download tools and install
2. go to qpst.exe in c:/programfiles/qualcomm/bin/qpst
3. now connect your phone open port by dialing(*#*#76937#*#) in stock
4. check whether qualcomm diagnostic port is enabled or not in device manager
5. if it shown enabled and device info its connected through diag port in qpst
6. now click software download and take backup of ur partition and save as (.qcn) and click on start it will read ur partition and
xx.qcn file will created(xx is any name)
7. now open hex editor search your imei number with [08xa] x is your starting digit of imei example(087a) for second imei click
find next option
8. now open your imei convertor and palce your imei and click convert
9. replace that converted imei in the form of hexadcimal replace with old imei same for second imei
10. important thing is while saving the file only by (save as) which is important if any mistake is happen we cant recover after
restoring in efs partition.
11. after saving again go to qpst npw go to restore option now click on start .
thats it! you got imei and signal:laugh::laugh::laugh:
i struggled 3 days for this to find correct way recover my ime
tools here
Click to expand...
Click to collapse
hi,i do exactly as you said,but no service
i have base band and imei ,but no service, i need a x821 qcn file
even i have qfil and then do as u said,but didnt work again
help pls
LG G5 RS988 "Your Device is Corrupt. It cannot be trusted and will not boot" HELP PLZ
Hello everyone,
I ran into this problem while trying to solve another.
The current state of my phone (RS988):
On booting, I receive this message: "Your device is corrupt. It cannot be trusted and will not boot."
Fastboot and Download Mode is still accessible.
I can still access the "Factory data reset" dialog, but after selecting "Yes" twice it takes me to the above message.
[edit]:
fastboot getvar unlocked
unlocked: no
I tried unlocking the phone again using fastboot flash unlock:
fastboot flash unlock unlock.bin
target reported max download size of 536870912 bytes
sending 'unlock' (1 KB)...
OKAY [ 0.053s]
writing 'unlock'...
(bootloader) Error!!
(bootloader) Bootloader Unlock key write fail
FAILED (remote failure)
finished. total time: 0.100s
_______________________________________________________________________________
how can i recover from this ? btw im on LG G5 RS988 21d update and i had alot of trouble finding a kdz file for LGUP
I have the same problem. I used Uppercut & LGUP v.1.14.3 to flash "RS98811c_00_ARB01_1.kdz" using Refurbish option stops al 10% (Primary GPT) error 0x2BC invalid command response: 0x80000121. Using Upgrade option stops at 11% (laf)with error 0x2BC invalid command response 0x80000202.
I had lost the phone, when recovered only booted on twrp. I tried to fix it using:
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/fota
After booting appeared the message "Your device is corrupt. It cannot be trusted and will not boot."
Nispero said:
I have the same problem. I used Uppercut & LGUP v.1.14.3 to flash "RS98811c_00_ARB01_1.kdz" using Refurbish option stops al 10% (Primary GPT) error 0x2BC invalid command response: 0x80000121. Using Upgrade option stops at 11% (laf)with error 0x2BC invalid command response 0x80000202.
I had lost the phone, when recovered only booted on twrp. I tried to fix it using:
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/fota
After booting appeared the message "Your device is corrupt. It cannot be trusted and will not boot."
Click to expand...
Click to collapse
the same thing exactly happened to me, somehow the bootloader got LOCKED again. i cant unlock it because of OEM Unlocking not enabled after wipe in TWRP. thinking about getting a new Logicboard\Motherboard. and i couldn't find RS98821d kdz\tot anywhere.
You'll need to send them in for repair with someone who has the non-free proprietary Qualcomm firehose files, xml partition map, and non-free stock partition files .mbn/.bin (similar to kdz/tot, but aren't). Or through the JTAG box method that I use. There's no other way to revive this particular phone model RS988 besides this method. I can do the JTAG box method repair if interested. You also wiped your fota and misc (can cause BT, wifi, and DRM media problems) partition which you shouldn't have, which again can't be fixed without JTAG. I can't share my particular methods, but if you Google them or search on YouTube, you'll get an idea.
patato21 said:
You'll need to send them in for repair with someone who has the non-free proprietary Qualcomm firehose files, xml partition map, and non-free stock partition files .mbn/.bin (similar to kdz/tot, but aren't). Or through the JTAG box method that I use. There's no other way to revive this particular phone model RS988 besides this method. I can do the JTAG box method repair if interested. You also wiped your fota and misc (can cause BT, wifi, and DRM media problems) partition which you shouldn't have, which again can't be fixed without JTAG. I can't share my particular methods, but if you Google them or search on YouTube, you'll get an idea.
Click to expand...
Click to collapse
Already fixed it. without JTAG
@BahaEzawi
That's cool, would you mind sharing how you did it?
I'm in the very same position.
BahaEzawi said:
Already fixed it. without JTAG
Click to expand...
Click to collapse
Great!. Have you a reference webpage to check?
As far as I can tell the issue is that there is no .DLL to load for this variant. Which I wish I knew about earlier...
mattintoronto said:
@BahaEzawi
That's cool, would you mind sharing how you did it?
I'm in the very same position.
Click to expand...
Click to collapse
I flashed the RS98810h.kdz file (which you can find on InfoPrime AIO Thread) using LGUP which basically the only kdz that i could flash. and for the DLL you could Use Uppercut (Also in InfoPrime AIO thread) then unlocked the bootloader again and installed TWRP then flashed the RS98821d zip. Thats it.
Or if u dont want to install TWRP you could just flash the RS98810h.kdz using LGUP and uppercut then unlock the bootloader and you're good to go.
mattintoronto said:
As far as I can tell the issue is that there is no .DLL to load for this variant. Which I wish I knew about earlier...
Click to expand...
Click to collapse
if youre trying to use LGUP just install uppercut.
BahaEzawi said:
I flashed the RS98810h.kdz file (which you can find on InfoPrime AIO Thread) using LGUP which basically the only kdz that i could flash. and for the DLL you could Use Uppercut (Also in InfoPrime AIO thread) then unlocked the bootloader again and installed TWRP then flashed the RS98821d zip. Thats it.
Or if u dont want to install TWRP you could just flash the RS98810h.kdz using LGUP and uppercut then unlock the bootloader and you're good to go.
Click to expand...
Click to collapse
Very cool, I thought that might work based on what I've read. Just didn't want to go further down the rabbit hole. Hope this works, if so expect some thanks, if not, well, at least I tried. Thanks for the quick reply!
mattintoronto said:
As far as I can tell the issue is that there is no .DLL to load for this variant. Which I wish I knew about earlier...
Click to expand...
Click to collapse
mattintoronto said:
Very cool, I thought that might work based on what I've read. Just didn't want to go further down the rabbit hole. Hope this works, if so expect some thanks, if not, well, at least I tried. Thanks for the quick reply!
Click to expand...
Click to collapse
You're welcome bro, good luck.
BahaEzawi said:
if youre trying to use LGUP just install uppercut.
Click to expand...
Click to collapse
Yea I wish I could. LGUP doesn't let you downgrade it seems?
Since I was on the D version it wouldn't let me.
Uppercut does work in general though for the variant from what I can tell so far.
---------- Post added at 11:50 PM ---------- Previous post was at 11:40 PM ----------
BahaEzawi said:
I flashed the RS98810h.kdz file (which you can find on InfoPrime AIO Thread) using LGUP which basically the only kdz that i could flash. and for the DLL you could Use Uppercut (Also in InfoPrime AIO thread) then unlocked the bootloader again and installed TWRP then flashed the RS98821d zip. Thats it.
Or if u dont want to install TWRP you could just flash the RS98810h.kdz using LGUP and uppercut then unlock the bootloader and you're good to go.
Click to expand...
Click to collapse
Does the Brightpoint version allow you to use the official bootloader unlocker method?
---------- Post added at 11:58 PM ---------- Previous post was at 11:50 PM ----------
mattintoronto said:
Yea I wish I could. LGUP doesn't let you downgrade it seems?
Since I was on the D version it wouldn't let me.
Uppercut does work in general though for the variant from what I can tell so far.
---------- Post added at 11:50 PM ---------- Previous post was at 11:40 PM ----------
Does the Brightpoint version allow you to use the official bootloader unlocker method?
Click to expand...
Click to collapse
EDIT: Nevermind I'm just an idiot. Thanks for all your help, spent all day on this, much to I'm sure my bosses chagrin.
mattintoronto said:
Yea I wish I could. LGUP doesn't let you downgrade it seems?
Since I was on the D version it wouldn't let me.
Uppercut does work in general though for the variant from what I can tell so far.
---------- Post added at 11:50 PM ---------- Previous post was at 11:40 PM ----------
Does the Brightpoint version allow you to use the official bootloader unlocker method?
---------- Post added at 11:58 PM ---------- Previous post was at 11:50 PM ----------
EDIT: Nevermind I'm just an idiot. Thanks for all your help, spent all day on this, much to I'm sure my bosses chagrin.
Click to expand...
Click to collapse
Thanks to you I could unbrick my RS988. 98810h.kdz installed smoothly. Flashing 98821d always ended in error, even it is recommended when checked IMEI on LG official page.
Has anyone found TWRP for LG-SP200. For The people who want to know how i unlocked the boot loader there is a unlock button inside of developer options know as ''OEM UNLOCKING" Please help find a good rom and custom recovery for this phone can be rooted once in for all.
For more information of this phone please click this link-https://forum.xda-developers.com/t/lg-tribute-dynasty
As far as i know twrp does not support this phone aka lg tribute dynasty ive been looking for a good root the works but i cant figure it out on this device its been long time since ive used an up to date android and i cant even find a root for this device
Lg dynasty
Hi. How were you able to have flash the dynasty with k8+ file using the lg up ? It does not let me cross flash it. Can you help ? Thank you very much
---------- Post added at 09:41 PM ---------- Previous post was at 09:30 PM ----------
Hi. Where is that feature on the dynasty ? I can not find it. Is is in the regular menu ? Thank u
Mag xx said:
Has anyone found TWRP for LG-SP200. For The people who want to know how i unlocked the boot loader there is a unlock button inside of developer options know as ''OEM UNLOCKING" Please help find a good rom and custom recovery for this phone can be rooted once in for all.
For more information of this phone please click this link-https://forum.xda-developers.com/t/lg-tribute-dynasty
Click to expand...
Click to collapse
Hey, the LG Tribute Dynasty is a mcv150 device. You might be able to install the TWRP for my device on your's. If it flashes then I can fix the the bugs. Search LG Aristo 2 TWRP. The device is a cv1 but the Phones look exactly the same. Give it a shot.
NonStickAtom785 said:
Hey, the LG Tribute Dynasty is a mcv150 device. You might be able to install the TWRP for my device on your's. If it flashes then I can fix the the bugs. Search LG Aristo 2 TWRP. The device is a cv1 but the Phones look exactly the same. Give it a shot.
Click to expand...
Click to collapse
If I could get into fastboot, it might work. I was wondering if using the LG UP tool and just flashing a specific partition might unlock the fastboot. Any Idea what partition I would try?
alipps1 said:
If I could get into fastboot, it might work. I was wondering if using the LG UP tool and just flashing a specific partition might unlock the fastboot. Any Idea what partition I would try?
Click to expand...
Click to collapse
Yah, you could use the Fastboot and aboot partitions from the Aristo 2 nougat firmware.
NonStickAtom785 said:
Yah, you could use the Fastboot and aboot partitions from the Aristo 2 nougat firmware.
Click to expand...
Click to collapse
Looking at the list of firmwares found the LG Fanclub Download page for the Aristo 2, which one would you recommend I take the fastboot and aboot partitions from? I would post the link but I am still listed as a junior member. There are 26 different firmwares listed, although several of those are 8.1, so I know not to use those. My phone is SP200 LMX201ULMA.
---------- Post added at 10:58 PM ---------- Previous post was at 10:25 PM ----------
NonStickAtom785 said:
Yah, you could use the Fastboot and aboot partitions from the Aristo 2 nougat firmware.
Click to expand...
Click to collapse
I just checked my current firmware kdz file (X210ULMA11a_00-NAO_US_OP_0921.kdz) and there are no partitions labeled aboot or fastboot. There is a boot partition and a recovery partition. Are the aboot and fastboot partitions contained WITHIN another partition?
NonStickAtom785 said:
Yah, you could use the Fastboot and aboot partitions from the Aristo 2 nougat firmware.
Click to expand...
Click to collapse
Two more things I can add:
1) I have a SP200.kdz file which I could share. It is a GSM version from a South American country.
2) I also have a complete dump of my phone using LGUP, if that would help.
alipps1 said:
Looking at the list of firmwares found the LG Fanclub Download page for the Aristo 2, which one would you recommend I take the fastboot and aboot partitions from? I would post the link but I am still listed as a junior member. There are 26 different firmwares listed, although several of those are 8.1, so I know not to use those. My phone is SP200 LMX201ULMA.
---------- Post added at 10:58 PM ---------- Previous post was at 10:25 PM ----------
I just checked my current firmware kdz file (X210ULMA11a_00-NAO_US_OP_0921.kdz) and there are no partitions labeled aboot or fastboot. There is a boot partition and a recovery partition. Are the aboot and fastboot partitions contained WITHIN another partition?
Click to expand...
Click to collapse
Well since you device is LMX2101ULMA I would use the fastboot and aboot partitions from the LMX210MA 10K
Here's the link:
https://lg-firmwares.com/downloads-file/16440/X210MA10k_00_MPCS_US_OP_0816.kdz
Quote:
Originally Posted by alipps1
Looking at the list of firmwares found the LG Fanclub Download page for the Aristo 2, which one would you recommend I take the fastboot and aboot partitions from? I would post the link but I am still listed as a junior member. There are 26 different firmwares listed, although several of those are 8.1, so I know not to use those. My phone is SP200 LMX201ULMA.
---------- Post added at 10:58 PM ---------- Previous post was at 10:25 PM ----------
I just checked my current firmware kdz file (X210ULMA11a_00-NAO_US_OP_0921.kdz) and there are no partitions labeled aboot or fastboot. There is a boot partition and a recovery partition. Are the aboot and fastboot partitions contained WITHIN another partition?
Well since you device is LMX2101ULMA I would use the fastboot and aboot partitions from the LMX210MA 10K
Here's the link:
https://lg-firmwares.com/downloads-f...US_OP_0816.kdz
That firmware package contains an aboot partition but no fastboot partition. Any other suggestions?
futuretricks
very helpful
alipps1 said:
Quote:
Originally Posted by alipps1
Looking at the list of firmwares found the LG Fanclub Download page for the Aristo 2, which one would you recommend I take the fastboot and aboot partitions from? I would post the link but I am still listed as a junior member. There are 26 different firmwares listed, although several of those are 8.1, so I know not to use those. My phone is SP200 LMX201ULMA.
---------- Post added at 10:58 PM ---------- Previous post was at 10:25 PM ----------
I just checked my current firmware kdz file (X210ULMA11a_00-NAO_US_OP_0921.kdz) and there are no partitions labeled aboot or fastboot. There is a boot partition and a recovery partition. Are the aboot and fastboot partitions contained WITHIN another partition?
Well since you device is LMX2101ULMA I would use the fastboot and aboot partitions from the LMX210MA 10K
Here's the link:
https://lg-firmwares.com/downloads-f...US_OP_0816.kdz
That firmware package contains an aboot partition but no fastboot partition. Any other suggestions?
Click to expand...
Click to collapse
Were you able to unlock the bootloader on mt6750?
jkim204 said:
Were you able to unlock the bootloader on mt6750?
Click to expand...
Click to collapse
NO
I flash rom my V30 i checked ChipErase in LGUP now my phone IMEI is 0 and empty Serial number (SN) ? I remember my IMEI and SN but i can write it. Please helpme write it to phone !
lehuyla said:
I flash rom my V30 i checked ChipErase in LGUP now my phone IMEI is 0 and empty Serial number (SN) ? I remember my IMEI and SN but i can write it. Please helpme write it to phone !
Click to expand...
Click to collapse
Why did you use Chip Erase? That's what Chip Erase does. It wipes out IMEI. In none on the Instructions for WTF or Frankenstein does it say to use Chip Erase on LGUP.
You'll have to Google how to do that. On XDA we can't talk about how to change IMEI.
ChazzMatt said:
Why did you use Chip Erase? That's what Chip Erase does. It wipes out IMEI. In none on the Instructions for WTF or Frankenstein does it say to use Chip Erase on LGUP.
You'll have to Google how to do that. On XDA we can't talk about how to change IMEI.
Click to expand...
Click to collapse
i already make chip erase 2 time but the IMEI
stay the same no problem
v300s
seloka180 said:
i already make chip erase 2 time but the IMEI
stay the same no problem
v300s
Click to expand...
Click to collapse
You're crazy or very lucky. Chip Erase WILL delete IMEI. That is what it does.
Straight from the manual:
https://9to5lg.com/lgup-1-15-manual-how-to-unbrick-restore-your-lg-devices-with-lgup/
3) ChipErase: Dangerous, This will erase IMEI/efs, Do not try this if you do not have a NV backup.
Click to expand...
Click to collapse
All I know is every one who reports they used chip erase in the Frankenstein thread wiped their IMEI. It's not part of ANY instructions in this forum, so any one who does it in on their own.
Here's the remainder of the explanation:
REFURBISH： You will lost all user data（KDZ or TOT）
2) UPGRADE: Keep data and update your phone（KDZ or TOT）
Select Upgrade to flash kdz firmware to unbrick/restore your phone back to stock.
3) ChipErase: Dangerous, This will erase IMEI/efs, Do not try this if you do not have a NV backup.
Chip Erase can also remove the Google FRP on many LG devices with Android 5.0, 6.0. (Such as LG H345, LG MS345)
4) PARTITION DL：flash the single Parition or selected paritions onto your phone.
This feature can solve “unkown model” issues. This feature can be used to bypass google frp by flashing specific tot firmware.
5) DUMP：Dump all paritions of your phone as backup.,
AT&T and Spring LG phone users who may need this feature to dump the firmware from a working phone as back up and use Patition DL to restore phones.
6) FOTA Upgrade: This can be used to flash OTA Update file that comes with dot up file extention.
Click to expand...
Click to collapse
try restore modem image via partition backup restore if you don't have one, try to pull from other V30 or other lg phone you have. Don't expect your phone will be normal as before, it's just some experiment that I suggest since you don't have any answer yet.
If you have a twrp EFS backup use that to restore. If not then you likely won't be able to restore it
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2 try this.
Make sure you still have the box for legit imei.
and instead of 815, replace with your phone model number e.g 930, 931, or 932...
immns said:
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2 try this.
Make sure you still have the box for legit imei.
and instead of 815, replace with your phone model number e.g 930, 931, or 932...
Click to expand...
Click to collapse
this is the program that I messed up my device with it (hard brick) after i restore edited efs partition .
it cost me about 30 $ to boot it with medusa box in repair shop.
So I became not afraid to break it so much that I did chiperase several times and did not even lose Imei.
seloka180 said:
this is the program that I messed up my device with it (hard brick) after i restore edited efs partition .
it cost me about 30 $ to boot it with medusa box in repair shop.
So I became not afraid to break it so much that I did chiperase several times and did not even lose Imei.
Click to expand...
Click to collapse
Please, no one else do that. You will lose IMEI. Only this one person says they have not lost IMEI using Chip Erase in LGUP, especially our Dev Patched LGUP.
ChazzMatt said:
Please, no one else do that. You will lose IMEI. Only this one person says they have not lost IMEI using Chip Erase in LGUP, especially our Dev Patched LGUP.
Click to expand...
Click to collapse
maybe because my device is repaired ?
I think I lost IMEI using one of the TWRP version switching to another LS998. My backup of the first was on a different TWRP version I didn't recognize the feature/version difference. So my old device backup of everything didn't have the same partitions as the new phone TWRP was capable. I wiped everything on the new device and restored everything SMH... Everything worked well except I went ahead and erased data because encryption. But later when I was checking for Gpay I realized my IMEI was 0. Lame. Obviously I still have the IMEI I even double checked it against the numbers captured by Android Find Device (not everyone knows that's there) but no way to restore it it seems.
Now I have a terrorist phone, as they call it, I guess. Anyway everything still works etc coming back from airplane mode takes a restart most times, and Gpay contactless payments cards stopped adding. FYI I guess for others. Still rocking my V30. Like my neighbor Chazmatt I might just buy another one lol one day and keep this one as the family backup. Otherwise I'm still using it full time.
2 day search Google, I repaired my phone imei but SN still emplty, i used Kingtool software. Every one can fix it if lose imei !
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2
Just for info: I have used the qualcomm nv tools from above (and set the port check test) and it worked for me!
Now I got my IMEI back!!! yipiieh
ChazzMatt said:
Please, no one else do that. You will lose IMEI. Only this one person says they have not lost IMEI using Chip Erase in LGUP, especially our Dev Patched LGUP.
Click to expand...
Click to collapse
lg g8 h870ds done the same and lost IMEI, any one can help?
vincentset said:
lg g8 h870ds done the same and lost IMEI, any one can help?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2
HueyT said:
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2
Click to expand...
Click to collapse
hey it says your phone is not rooted, so what can I do?
vincentset said:
hey it says your phone is not rooted, so what can I do?
Click to expand...
Click to collapse
Can't fix anything without rooting phone first
I did exactly the same thing my fix came with looking in the hidden menu *#546368#*998#
stinka318 said:
I did exactly the same thing my fix came with looking in the hidden menu *#546368#*998#
Click to expand...
Click to collapse
Elaborate:laugh:
HueyT said:
Elaborate:laugh:
Click to expand...
Click to collapse
It depends on what model you have on the hidden menu *#546368#* then the number of your model then # go to sev menu look for mid in there you can put original imei number in if know or geniate a new one......