hello everyone
anyone using qc 3.0 in Kenzo(rn3)
does it harm kenzo plz answer
i buyed transmort qc3.0 charger using with franco kernal
anyone here using qc3.0 with any supported charger for long time plz reply
cause any problem to rn3
QC3 is not supported so it'll just be QC2 but waste of money just 20-25 min difference in charging time
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
QC3 is not supported so it'll just be QC2 but waste of money just 20-25 min difference in charging time
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
See the attachment i uoad pic using franco kernal quth transmort qc 3.0 charger
android_smater said:
See the attachment i uoad pic using franco kernal quth transmort qc 3.0 charger
Click to expand...
Click to collapse
Lol want fry your charging PCB circuit.
Use quick charge 2.0 lol
While charging device must not cross 42degree celcius temp.
Otherwise end up like us no battery backup like others
First with stock charger I am getting 9 hrs sot then using quick charge 2.0 getting 6-7 hrs max sot IMO
Related
Hi, just wanted to ask how long does it take to charge battery on the average. My battery charging time has increase from 2 hours to 3. 5 hours. Usually I charge with about 25% left. It still takes more than 3 hours. I have had this s3 for just 2 weeks. Thanks in advance.
Sent from my Galaxy Nexus using Tapatalk 2
mrm43 said:
Hi, just wanted to ask how long does it take to charge battery on the average. My battery charging time has increase from 2 hours to 3. 5 hours. Usually I charge with about 25% left. It still takes more than 3 hours. I have had this s3 for just 2 weeks. Thanks in advance.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Is a bit over 3 hrs....
try this app to see if your phone is receiving proper charge .... install current widget from google play
default charge is 1000 ma (wall charger)
default usb charge 450 ma
with the siyah kernel stweeks you could increase wall charge to 1200 ma + usb to 900 ma
hope it is usefull
slimg said:
Is a bit over 3 hrs....
try this app to see if your phone is receiving proper charge .... install current widget from google play
default charge is 1000 ma (wall charger)
default usb charge 450 ma
with the siyah kernel stweeks you could increase wall charge to 1200 ma + usb to 900 ma
hope it is usefull
Click to expand...
Click to collapse
Thanks very much. I installed the app and I am only getting 466ma while using wall charger. Is that acceptable?
Sent from my Galaxy Nexus using Tapatalk 2
I had the same problem after jb update now after changing the usb cable its back to normal...the problem is with the defective 4 pin usb cable bundled with few of our phones...so the only solution is buy a 5 pin usb cable of some other brand( htc , ,soney, lg..) that should solve your problem.
Sent from my GT-I9300 using xda premium
mrm43 said:
Thanks very much. I installed the app and I am only getting 466ma while using wall charger. Is that acceptable?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ain't good enough buddy. I have this kind of problem if you have read my posts on the Philippines thread but I have sorted it out already.
Anyway go look in here, you are not alone. :thumbup:
http://forum.xda-developers.com/showthread.php?t=1907361
Sent from my GT-I9300 using Tapatalk 2
Just to follow it up:
Yes I can confirm that it is a cable problem. All my test were done while running the Current widget app.
Using:
My charger and my cable = 466ma
Wife's charger and her cable = 999ma
Wife's charger and my cable =466ma
My charger and wife's cable =999ma
From this i can tell that the probkem is my cable.
But I think I fixed it. I tried blowing the pins on my cable so dust would clear.
And to my surprise, I got 999ma using my charger and my cable.
Anyway thanks to all. Hope that's the end of it.
Sent from my Galaxy Nexus using Tapatalk 2
EtienneBordeaux said:
Ain't good enough buddy. I have this kind of problem if you have read my posts on the Philippines thread but I have sorted it out already.
Anyway go look in here, you are not alone. :thumbup:
http://forum.xda-developers.com/showthread.php?t=1907361
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for this. I will be reading it later.
Sent from my Galaxy Nexus using Tapatalk 2
You nailed it ...
mrm43 said:
Just to follow it up:
Yes I can confirm that it is a cable problem. All my test were done while running the Current widget app.
Using:
My charger and my cable = 466ma
Wife's charger and her cable = 999ma
Wife's charger and my cable =466ma
My charger and wife's cable =999ma
From this i can tell that the probkem is my cable.
But I think I fixed it. I tried blowing the pins on my cable so dust would clear.
And to my surprise, I got 999ma using my charger and my cable.
Anyway thanks to all. Hope that's the end of it.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Is great that you found the problem , and that is not expensive to replace :good:
Hello friends today I will tell you how u can charge your note 2 very fast.. As we all know note 2 takes quite a long time to charge.. So I will tell u a simple trick to charge your note 2 faster than ever...
What u have to do just replace your Samsung's data cable to nokia's data cable.. now many people will ask me what's the difference in those data cable.. guyzz there is a big logic behind this..
In samsung's data cable there are just 4pins in pin.. But in nokia's or in lg's data cable there are 5pins in pin that's why they charge very fast.. Take a look on picture I have lg's data cable and it have 5pins in pin..
So guyzz just use nokia's or lg's data cable to charge your note 2 very fast.. believe me guyz it really works..
Hit thanks if I helped you...
Sent from my Android using xda premium
I think it should have been posted in general thread
(How to) charge your note 2 faster...
Use a 2+amp charger. Anything else will take longer.
/thread.
It's true
Eddie_Brock said:
(How to) charge your note 2 faster...
Use a 2+amp charger. Anything else will take longer.
/thread.
Click to expand...
Click to collapse
It's true. I am using the cable from my old HTC phone and it takes 2-2.5 hours to charge the phone. It will take 5-6 hours if Samsung cable is used.
how does having 5 pins help in charging faster ?
ultimately on the other end there are only 4 pins right ?
ntkhoa said:
It's true. I am using the cable from my old HTC phone and it takes 2-2.5 hours to charge the phone. It will take 5-6 hours if Samsung cable is used.
Click to expand...
Click to collapse
Weird... My note2 charges 50% per hour using note2 cable.
I believe it might increase the phone temp
Sent from my GT-N7100 using XDA Premium 4 mobile app
ntkhoa said:
It's true. I am using the cable from my old HTC phone and it takes 2-2.5 hours to charge the phone. It will take 5-6 hours if Samsung cable is used.
Click to expand...
Click to collapse
Download "Galaxy Charging current" from the play store and you should get 1800 mA as your max and current if it's lower than that then you should replace your cable with a note 2 original cable just like what happened to me suddenly my note 2 needed 8 hours to charge now it's back to 2 hour \o/
My charger takes me a hour and a half to charge incredible I purchased it at handtec and honestly its amazing
http://www.handtec.co.uk/samsung-of...rousb-cable-white-eta-u90uweg-ecb-du4awe.html
Sent from my GT-N7100 using xda app-developers app
i'm using Anker Astro E5 15000mAh External Battery USB cable... Trust Me... very fast charging:good:
i though best is using the galaxy current charging app to see the power current charging rate between 1600-1800 ?
does this LG 5 pin cable charging rate between 1600~1800mAh ?
Wont the charging tweaks fill in the hypothetical gap of both the pins in the cable? I mean im sure you can simply adjust the kernel to push out a higher current, or will the higher current be limited by the Samsung cable?
Actually yes! Just use persues kernel. You can reduce input voltage to as low as 0.3amp and as high as 2.1 amp. N2 Charges by default at 1.8amp.
Sent from my GT-N7100 using xda app-developers app
it is true....I hav been using it form a quite long time...
Sent from my GT-N7100 using XDA Premium 4 mobile app
thnx...it really works!!!
Sent from my GT-N7100 using XDA Premium 4 mobile app
tnks
thanks bro
As per my point of view its all misconceptions ......as long as ur phone is getting more than 1600 mamp current it will fast charge with any of the cables ...and if ur getting less than that it will charge slow ...so instead keep an eye on that ...as soon as it starts reducing check the cable .....
Sent from my GT-N7100 using XDA Premium 4 mobile app
I charge in less than 2 hours with a charger I bought at a shop nearby.and it has the HTC usb attached
I agree to Manish
I agree to Manish.. check first in galaxy chaging current app what you are getting. Currently im using a 3 in 1 usb cable and Im getting 1800mah using the 2.1amp charger and 1200 if I connected it to the usb port of my laptop.
Recently purchased a note 2 which ill be rooting/roming, but question,
First charge took nearly 5 hours to complete? From about 40% to 100, ive never owned a phablet before so am just curious, battery seems to be draining fine btw
Sounds normal? any known defects of the note 2? Thanks..
Sent from my M7 using xda app-developers app
Was it the stock charger? OEM chargers have a 2.1 amp output vs the 1 amp used on normal chargers. It hakes a big difference.
Sent from my SCH-I605 using Tapatalk 2
Yes stock charger, brand new out of the box, ill check when i get home make sure it came with 2.1a thanks
Sent from my One using xda app-developers app
First charges always take longer. At the peak of a lithium batterys life it will take less time to charge and last the longest. Plus the note battery is fairly high mah anyways.
Just wondering, our stock charger is rated 1.5A.
How come it seems that it can only charge 900~1100mA?
Many factors... Convertion loss.. Charging algorithm.. Temperature... So on
Sent from my D6503 using XDA Free mobile app
peeweew said:
Just wondering, our stock charger is rated 1.5A.
How come it seems that it can only charge 900~1100mA?
Click to expand...
Click to collapse
How did you measure it?
Install Ampere app from the store
Lasantha said:
Many factors... Convertion loss.. Charging algorithm.. Temperature... So on
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Is that normal? Are your Z2 chargers also like that? My usual charging time from 10-100% takes up 3hrs+ and it really takes so much time.
Back then on my Nexus 5, using stock 1.3A rated charger it only takes an hour and a half for a 2300mAh battery.
How come it takes double. Z2 is only 3200mAh right?
Sent from my D6503 using Tapatalk
peeweew said:
Is that normal? Are your Z2 chargers also like that? My usual charging time from 10-100% takes up 3hrs+ and it really takes so much time.
Back then on my Nexus 5, using stock 1.3A rated charger it only takes an hour and a half for a 2300mAh battery.
How come it takes double. Z2 is only 3200mAh right?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
If your charging is slow you could try my rev4 quick charging mod from here: http://forum.xda-developers.com/showpost.php?p=62425879&postcount=224
Also, please note that Ampere does not show you the input charge.
Is there any Developer who can make a custom kernels for redmi note 4 to charge fast
Devguptaxda said:
Is there any Developer who can make a custom kernels for redmi note 4 to charge fast
Click to expand...
Click to collapse
They will, but it takes time. So, wait the worth.
This ROM shows as charging rapidly while charging with Motorola charger
https://forum.xda-developers.com/re...elopment/rom-unofficial-lineageos-13-t3607847
https://drive.google.com/open?id=0B_B-dDTxjqytdENwQXQ1a3FFQVk
drmuruga said:
This ROM shows as charging rapidly while charging with Motorola charger
https://forum.xda-developers.com/re...elopment/rom-unofficial-lineageos-13-t3607847
https://drive.google.com/open?id=0B_B-dDTxjqytdENwQXQ1a3FFQVk
Click to expand...
Click to collapse
Take the pic when it is at 80 and 90 percent
Winter is Coming.
drmuruga said:
This ROM shows as charging rapidly while charging with Motorola charger
https://forum.xda-developers.com/re...elopment/rom-unofficial-lineageos-13-t3607847
https://drive.google.com/open?id=0B_B-dDTxjqytdENwQXQ1a3FFQVk
Click to expand...
Click to collapse
Wait wot? Never saw this "charging rapidly" on my Lineage OS experience. All I saw was charging and charging slowly and are you using a Turbo Charger?
Zephoro said:
Wait wot? Never saw this "charging rapidly" on my Lineage OS experience. All I saw was charging and charging slowly and are you using a Turbo Charger?
Click to expand...
Click to collapse
Yes.
manojkumar8552 said:
Winter is Coming.
Click to expand...
Click to collapse
Hahaha xD
gauravbhakuni90 said:
Take the pic when it is at 80 and 90 percent
Click to expand...
Click to collapse
Ok, some screenshots
drmuruga said:
Ok, some screenshots
Click to expand...
Click to collapse
can you give a pic when battery at 10% and 60%,,,
how much of time needed from 10% ~60% ?
if you have usb tester, please test what voltage is used when using QC2.0/QC3.0 charger, 5V or 9V
thx
drmuruga said:
Ok, some screenshots
Click to expand...
Click to collapse
Interesting. Download the Ampere app and check the current.