I just took delivery of a 2018 Honda Odyssey EX-L that has an Android Lollipop 5.1.1 based system.
I attempted to connect to the system to gain root following the instructions which work for a 2016 Honda Pilot which were found here: https://forum.xda-developers.com/showpost.php?p=71331595&postcount=404
I was able to connect via ADB wirelessly to the vehicle
Connecting to 192.168.1.68\n
connected to 192.168.1.68:5555
Checking for root...
No root yet, addressing the situation
Attempting to push payloads to /data/local/tmp/rootme\n
mkdir failed for /data/local/tmp/rootme, File exists
1 KB/s (60 bytes in 0.031s)
97 KB/s (10964 bytes in 0.110s)
26 KB/s (835 bytes in 0.030s)
124 KB/s (133472 bytes in 1.047s)
Exploiting dirtycow to replace factory_reset.sh with our own\n
error: only position independent executables (PIE) are supported.
Okay - should be all set, initiate factory reset and hope for the best!
Go to Home ->Settings->System->Factory Data Reset (scroll all the way down) and ititiate factory reset, press enter when unit has rebooted & reconnected to WiFi
Okay - checking for successfull root\n
connected to 192.168.1.68:5555
error: device unauthorized.
This adbd's $ADB_VENDOR_KEYS is not set; try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
Click to expand...
Click to collapse
Now I did clear out my Keys on the computer side and and tried again and got no further.
Has anyone successfully rooted a 2018 Honda system yet?
If not I am willing to be the guinea pig, but I am not an Android guy and could use some help.
Very interested in this as well. Haven't picked up my 2018 Odyssey yet but it will be very soon.
Thanks
\adb\adb.exe
Connecting
Connected
abi: armeabi-v7a
1105 KB/s (17880 bytes in 0.015s)
5 KB/s (5544 bytes in 1.000s)
WARNING: linker: /data/local/tmp/dcow: unused DT entry: type 0x6ffffffe arg 0x828
WARNING: linker: /data/local/tmp/dcow: unused DT entry: type 0x6fffffff arg 0x1
dcow /data/local/tmp/run-as /system/bin/run-as
warning: new file size (5544) and destination file size (9440) differ
[*] size 9440
[*] mmap 0x76ece000
[*] currently 0x76ece000=464c457f
[*] using /proc/self/mem method
[*] madvise = 0x76ece000 9440
[*] madvise = 0 12210747
[*] /proc/self/mem 86252832 1374063
[*] exploited 0 0x76ece000=464c457f
25 KB/s (406 bytes in 0.015s)
4727 KB/s (75348 bytes in 0.015s)
2824 KB/s (903797 bytes in 0.312s)
Reconnecting
Reconnected
WARNING: linker: /data/local/tmp/dcow: unused DT entry: type 0x6ffffffe arg 0x828
WARNING: linker: /data/local/tmp/dcow: unused DT entry: type 0x6fffffff arg 0x1
dcow /data/local/tmp/run-as /system/bin/run-as
warning: new file size (5544) and destination file size (9440) differ
[*] size 9440
[*] mmap 0x76eb7000
[*] currently 0x76eb7000=464c457f
[*] using /proc/self/mem method
[*] madvise = 0x76eb7000 9440
[*] /proc/self/mem 569631328 970293
[*] madvise = 0 15112179
[*] exploited 0 0x76eb7000=464c457f
Usage: run-as <package-name> <command> [<args>]
Any update on this?
unleash Android Auto please....
Anybody have any leads on rooting the Odyssey 2018?
Anybody have any leads on sideloading waze or gmaps?
I was able to enable USB debugging, connect via ADB and install "some" APks
I was able to get an older version of waze to work (no need to disable distracting driver mode)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hello All,
Please Help, I am trying to unlock my bootloader using the semcboot tool here (http://forum.xda-developers.com/showthread.php?t=1254087) but I am having an error on the process. Please let me know the solution for this.
I am qualified with this condition so I used this one - "If you can find semc simlock certificate in one of the last lines from the output, you can unlock your bl with the *semc.bat file"
but unfortunately, upon starting the tool, I encountered this error message. Please let me know what should I do. Thank you!
Code:
process requires standard 2.x android firmware.
Premere un tasto per continuare . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
cannot stat 'bootTools\rageagainstthecage': No such file or directory
Unable to chmod /data/local/tmp/expl: No such file or directory
/data/local/tmp/expl: not found
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
3 KB/s (3087 bytes in 1.000s)
Unable to open router port: Permission denied
Diag_LSM: Diag_LSM_Init: Failed to open handle to diag driver, error = 13 ERR :
MSG Open handle failed, unable to open program 30eeeeee ver 10001 NOT FOUND
:FILE vendor/qcom-proprietary-qsd8k/oncrpc/oncrpc/oncrpc_cb.c:LINE 231:ARG1 82
0965102:ARG2 65537:ARG3 0:
ERR :MSG Couldn't setup RPC call :FILE vendor/qcom-proprietary-qsd8k/oncrpc/on
crpc/oncrpc_cb.c:LINE 276:ARG1 0:ARG2 0:ARG3 0:
Error: Failed to lookup client for 0x30EEEEEE 0x00010001
FATAL :MSG Failed to lookup RPC client. prog = 820965102, vers = 65537, tout =
0 :FILE vendor/semc/system/core/miscta/libmiscta/rpc_service.c:LINE 65:ARG1 820
965102:ARG2 65537:ARG3 0:
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
/data/local/tmp/expl: not found
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
502 KB/s (8064 bytes in 0.015s)
insmod: init_module '/data/local/tmp/mapper_2.6.29.ko' failed (Operation not per
mitted)
Second, we need to write semcboot ;)
3054 KB/s (588228 bytes in 0.188s)
can't find userdate partition
Premere un tasto per continuare . . .
Please HELP!
same error here on sony erricson x10 rooted and xrecovery installed, baseband 2.1.71 with android stock 2.3.3
any help on this please?
my entire error lines from qsd8250_semc.cmd
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
950 KB/s (585731 bytes in 0.601s)
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
35 KB/s (3087 bytes in 0.083s)
Unable to open router port: Permission denied
Diag_LSM: Diag_LSM_Init: Failed to open handle to diag driver, error = 13 ERR :
MSG Open handle failed, unable to open program 30eeeeee ver 10001 NOT FOUND
:FILE vendor/qcom-proprietary-qsd8k/oncrpc/oncrpc/oncrpc_cb.c:LINE 231:ARG1 82
0965102:ARG2 65537:ARG3 0:
ERR :MSG Couldn't setup RPC call :FILE vendor/qcom-proprietary-qsd8k/oncrpc/on
crpc/oncrpc_cb.c:LINE 276:ARG1 0:ARG2 0:ARG3 0:
Error: Failed to lookup client for 0x30EEEEEE 0x00010001
FATAL :MSG Failed to lookup RPC client. prog = 820965102, vers = 65537, tout =
0 :FILE vendor/semc/system/core/miscta/libmiscta/rpc_service.c:LINE 65:ARG1 820
965102:ARG2 65537:ARG3 0:
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
94 KB/s (8064 bytes in 0.083s)
insmod: init_module '/data/local/tmp/mapper_2.6.29.ko' failed (Operation not per
mitted)
Second, we need to write semcboot ;)
951 KB/s (588228 bytes in 0.603s)
can't find userdate partition
Press any key to continue . . .
This is a port of Ubuntu Touch (Preview) for Huawei Mediapad tablet (s7-30xx).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Keep in mind that:
- its experimental;
- not for daily use;
- only for developers;
- dont try install it if you have no skills at least in working with adb;
- you have to do a nandroid before installing;
- dont blame anyone for broken device
How to install (almost everything the same as for other cm9-10.1 releases):
1. Install twrp/cwm recovery.
2. Make factory reset.
3. Install the device specific part for Ubutnu.
4. Install the generic Ubuntu part.
5. Install dpi fix.
6. Reboot
7. Open terminal at PC, connect tablet via usb cable to it and enter the following commands:
Code:
adb root
Code:
adb shell
Code:
ubuntu_chroot shell
If you want to see GUI then type:
Code:
ubuntu-session
--- Enjoy the testing! --- (or not enjoy )
Download links:
- Device specific part: http://www.mediafire.com/download.php?71147ctm19763n8.
- Generic Ubuntu part: http://cdimage.ubuntu.com/ubuntu-to...c-demo/quantal-preinstalled-phablet-armhf.zip;
- DPI fix: http://www.mediafire.com/download.php?g8granxnx1q2iqt.
Working:
- Ubuntu Touch OS;
- Touchscreen;
- Display;
- ADB;
- Wifi (with manual config).
Some bad screenshots:
Nice
Is working/not working this or more things don't work?
Question : What Works?
Answer : As this is a Developer Build, dont expect much to work. The items that have been confirmed to work are;
Touchscreen
Sound (over speakers)
Display
Internet Browser
WiFi (No WPS)
Camera (Front and Back)
Video Player
ADB
Screen Brightness Controls
Automatic Brightness
Speech Driven HUD (Yes, it works)
GSM Voice (No APN Settings)
The SideStage Seems to be working
Question : What Does Not Work?
Answer : As this is a developer build, dont expect things to work properly, here are a few things that are not working
3G/4G Data
Audio Out via Headphones
HDMI
Bluetooth
Most Applications and Menus
Charging Indicator
Software Center (Note : You can install simple shell applications via apt-get install … once inside the chroot)
Most applications are placeholders
MMS
CDMA Connections
SIM Storage
Auto Rotation (Or any rotation for that matter)
Random Crashes when swiping
Notifications (All of them are placeholders)
Most Applications that do function are web apps like m.gmail.com.
NFC
Click to expand...
Click to collapse
Screenshots
Wow, this is great too bad there is no networking, otherwise it is pretty neat
One bug is that the keyboard is too big for the screen (see messaging screenshot below).
Here are screenshots via ddms:
OMG!!! Thank you!!! Can we expect more of ubuntu touch for mediapad beyond a developer preview?
Sent from my Huawei MediaPad using xda app-developers app
That was a very quick try, so dont wait too much from it. Besides ubuntu touch in very very early stage of developing.
For keyboard Its needed to adjust ubuntu-session, i havent done it in proper way.
Please don't stop developing for the Mediapad.
By the way i have been able to setup wireless connection (to open access point, cant do it for wpa2)
To do it you need from
Code:
adb shell
perform the following:
Code:
insmod /system/lib/modules/dhd.ko firmware_path=/system/etc/wifi/rtecdc-bcm4329.bin nvram_path=/system/etc/wifi/nvram-bcm4329.txt
Then go to chroot shell via
Code:
ubuntu_chroot shell
and then setup wireless connection from there (in linux way from terminal
For example:
Code:
mount -t proc proc /proc
ifconfig wlan0 up
iwconfig wlan0 mode managed
iwconfig wlan0 essid your_ssid
dhclient wlan0
or something like that.
will this work on s7-931u?
Sent from my GT-I9000 using xda app-developers app
bobo1337 said:
will this work on s7-931u?
Click to expand...
Click to collapse
Not. This build are compatible only for MediaPad S7-30*u/w
Hello, i have tried to get ubuntu touch running, but my screen stays black.
when typing ubuntu-session in adb I see two lines in response:
ubuntu-session
Redirecting output to local session logs
does not look that bad, but my screen stays black all the time
and i can not connect to the device via adb anymore.
any idea what is going on? I used the daily build from 8.03
thx and greetings
Hi
I have tried to flash one more time, here is the log of the first call of ubuntu-session after flash:
Code:
[email protected]:/ # ubuntu_chroot shell
ubuntu_chroot shell
[email protected]:/# ubuntu-session
ubuntu-session
Redirecting output to local session logs
/usr/bin/ubuntu-session: line 21: /home/phablet/.ubuntu-session/logs/ubuntu-sess
ion.log: No such file or directory
Error, do this: mount -t proc proc /proc
grep: /proc/cpuinfo: No such file or directory
Device=
Starting session bus
Started pulseaudio with pid 398 (0 secs start delay)
Started maliit-server with pid 403 (0 secs start delay)
/usr/bin/ubuntu-session: line 122: 403 Segmentation fault ${service[1]} $
arguments &>"$HOME/.ubuntu-session/logs/$binary.log"
Started qml-phone-shell with pid 410 (2 secs start delay)
Got Shell pid = 410
Started chewie_messaging_populate_menu with pid 415 (0 secs start delay)
Started friends-service with pid 420 (0 secs start delay)
/usr/bin/ubuntu-session: line 122: 410 Segmentation fault ${service[1]} $
arguments &>"$HOME/.ubuntu-session/logs/$binary.log"
Started manage-address-books.py with pid 443 (2 secs start delay)
Started ofono-setup with pid 483 (12 secs start delay)
Stopping services...
Stopping pulseaudio
/usr/bin/ubuntu-session: line 38: kill: (398) - No such process
Stopping maliit-server
/usr/bin/ubuntu-session: line 38: kill: (403) - No such process
Stopping qml-phone-shell
/usr/bin/ubuntu-session: line 38: kill: (410) - No such process
Stopping chewie_messaging_populate_menu
Stopping friends-service
Stopping manage-address-books.py
/usr/bin/ubuntu-session: line 38: kill: (443) - No such process
Stopping ofono-setup
Killing session bus...
Session stopped.
[email protected]:/#
Can anybody tell me what went wrong?
Killigrew said:
Hi
I have tried to flash one more time, here is the log of the first call of ubuntu-session after flash:
Code:
[email protected]:/ # ubuntu_chroot shell
ubuntu_chroot shell
[email protected]:/# ubuntu-session
ubuntu-session
Redirecting output to local session logs
/usr/bin/ubuntu-session: line 21: /home/phablet/.ubuntu-session/logs/ubuntu-sess
ion.log: No such file or directory
Error, do this: mount -t proc proc /proc
grep: /proc/cpuinfo: No such file or directory
Device=
Starting session bus
Started pulseaudio with pid 398 (0 secs start delay)
Started maliit-server with pid 403 (0 secs start delay)
/usr/bin/ubuntu-session: line 122: 403 Segmentation fault ${service[1]} $
arguments &>"$HOME/.ubuntu-session/logs/$binary.log"
Started qml-phone-shell with pid 410 (2 secs start delay)
Got Shell pid = 410
Started chewie_messaging_populate_menu with pid 415 (0 secs start delay)
Started friends-service with pid 420 (0 secs start delay)
/usr/bin/ubuntu-session: line 122: 410 Segmentation fault ${service[1]} $
arguments &>"$HOME/.ubuntu-session/logs/$binary.log"
Started manage-address-books.py with pid 443 (2 secs start delay)
Started ofono-setup with pid 483 (12 secs start delay)
Stopping services...
Stopping pulseaudio
/usr/bin/ubuntu-session: line 38: kill: (398) - No such process
Stopping maliit-server
/usr/bin/ubuntu-session: line 38: kill: (403) - No such process
Stopping qml-phone-shell
/usr/bin/ubuntu-session: line 38: kill: (410) - No such process
Stopping chewie_messaging_populate_menu
Stopping friends-service
Stopping manage-address-books.py
/usr/bin/ubuntu-session: line 38: kill: (443) - No such process
Stopping ofono-setup
Killing session bus...
Session stopped.
[email protected]:/#
Can anybody tell me what went wrong?
Click to expand...
Click to collapse
I got issue same you,still can't solve.
chok_thewa said:
I got issue same you,still can't solve.
Click to expand...
Click to collapse
I tried to launch Ubuntu on my MediaPad
It's work onli in wire-to-pc mode. When I disconnect a Usb-wire - I have a blank screen.
Any plans on future work on it? I read that late may build should be for daily use so I finally managed to try it. I used latest raring build but I had no luck with getting GUI working :/
Can I boot directly in, or is this Chroot only?
The install instructions include a chroot, but is that what ubuntu ends up running in? Is it possible to run without loading android into ram as well?
Thanks.
This is a root method for XT912 that Iv'e found on other place
*For Windows Only.
*I didn't tried that by myself since I don't have XT912,I own the XT910.
Instructions (Really Simple ) :
1.Download The ZIP File:
http://vulnfactory.org/public/razr_blade.zip
2.Extract The ZIP File.
3.Make sure that in developer options Debugging checked.
4.Connect the device via USB to the PC with moto drivers installed
5.Execute run.bat and follow the instruction.
Credits:
djrbliss
Paypal account for donation: http://goo.gl/zBGb0
Big thanks to "hrishi21007" for PMing me about this video:
https://www.youtube.com/watch?v=VSe9bvpDONg
jb ota xt910, the device did not work, gives the following errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's good to know that it's not working ox XT910 after someone tried,thanks
xt910 Is there a working root?
By.TRabZonLu™ said:
xt910 Is there a working root?
Click to expand...
Click to collapse
Unfortunately not yet.
When work.
maybe there is...
By.TRabZonLu™ said:
xt910 Is there a working root?
Click to expand...
Click to collapse
In XT910 you can root from inside BMM.
hwhitewolf said:
In XT910 you can root from inside BMM.
Click to expand...
Click to collapse
You need Root to install BMM
Gesendet von meinem XT910 mit Tapatalk 2
By.TRabZonLu™ said:
When work.
Click to expand...
Click to collapse
When someone finds an exploit...?
what the hell doesn't DAN's razr blade root exploit method work already? i just did it to my brothers phone and it works...
edit: did not realize they were talking about xt910
Works like a charm on XT912. thanks a lot
Unroot?
Someone knows how to unroot? Just in case we receive a new OTA or something on the xt 912....
Thanks!
root
chinkster said:
what the hell doesn't DAN's razr blade root exploit method work already? i just did it to my brothers phone and it works...
edit: did not realize they were talking about xt910
Click to expand...
Click to collapse
xt910 device working?
UNROOT is easy:
1.Uninstall any app that can cause problems like BMM or SS without root.
2.Download and install SuperSU from the market for free if it ain't installed by itself as a root manager.
3.Uninstall other root managers from TB or similiar programs.
4.Look for unroot in SuperSU.
The blade ain't no working on GSM roms, couse the smart action is patched in the GSM roms
BTW, I't must work on xt910 with CDMA roms.
can use in XT910 ?
No
Sent from my XT910 using Tapatalk 2
Hey guys... Having issues with this...
Have an XT912 running 4.1.2
On step 3, I get this error:
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
121 KB/s (3477 bytes in 0.028s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
284 KB/s (91992 bytes in 0.316s)
1418 KB/s (1867568 bytes in 1.286s)
1460 KB/s (574184 bytes in 0.384s)
930 KB/s (63838 bytes in 0.067s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Any ideas what I'm doing wrong?
RBThompsonV said:
Hey guys... Having issues with this...
Have an XT912 running 4.1.2
On step 3, I get this error:
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
121 KB/s (3477 bytes in 0.028s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
284 KB/s (91992 bytes in 0.316s)
1418 KB/s (1867568 bytes in 1.286s)
1460 KB/s (574184 bytes in 0.384s)
930 KB/s (63838 bytes in 0.067s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Tried on Win7 and Win 8 both x64, both fresh installs... Same errors...
Any helps at all? Need more info? Just ask... Would REALLY like to root this phone
---------- Post added at 12:51 PM ---------- Previous post was at 12:01 PM ----------
RBThompsonV said:
Hey guys... Having issues with this...
Have an XT912 running 4.1.2
On step 3, I get this error:
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
121 KB/s (3477 bytes in 0.028s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
284 KB/s (91992 bytes in 0.316s)
1418 KB/s (1867568 bytes in 1.286s)
1460 KB/s (574184 bytes in 0.384s)
930 KB/s (63838 bytes in 0.067s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Tried on Win7 and Win8 both x64 machines... both fresh installs. Same results...
What am I missing?
I'm trying to restore my phones userdata partition from a backup I made a couple months ago because I recently had to do a Factory Reset to get rid of a certain bug. However, I'm getting the following error with fastboot:
Code:
Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash userdata C:\Users\pizza\Desktop\Coolpad3320A\FirmwareBackup3-8-17\userdata.img
target reported max download size of 268435456 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 1686130176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1415818752 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1151208960 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 879189504 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 609160704 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 335445504 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 77467136 is not a multiple of the block size 4096
erasing 'userdata'...
OKAY [ 1.123s]
sending sparse 'userdata' 1/8 (261137 KB)...
error: write_sparse_skip_chunk: don't care size 1686130176 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1686130176 is not a multiple of the block size 4096
OKAY [155.388s]
writing 'userdata' 1/8...
FAILED (remote: buffer overreads occured due to invalid sparse header)
finished. total time: 183.767s
C:\Program Files (x86)\Minimal ADB and Fastboot>
And now when I turn on my phone it doesn't boot, instead there is a worrying white bar at the top of the screen that appears to be glitching out, then the phone just turns back off.
I can only fix the phone by erasing and then reflashing all available partitions from here:
https://www.androidfilehost.com/?w=files&flid=126528
This gives me a fresh start, and also a headache, I had over 300 applications installed with LINK2SD and I'm not sure how to go about adding them back. Any assistance would be greatly appreciated.
UPDATE:
Found this software: http://ow.ly/qgWc30bVnz7
So I can at least retrieve some data manually, also, I gleaned some new info about the userdata.img:
Code:
Error Opening \\.\PhysicalDrive1. Error Code 2
No of disks 1
Scanning \\.\PhysicalDrive0
index 0 ID 27 size 3072000
index 1 ID 7 size 949848312
index 2 ID 27 size 1046528
index 3 ID 17 size 22802432
Partition Table Error on C:/Users/XXXXX/Desktop/Coolpad3320A/FirmwareBackup3-8-17/userdata.img
Invalid End of sector markerBlock size 4096, inp 7984, inodesize 256
Linux Partition found on disk 2 partition 0
The problem NOW is, I cant just extract all the files with this and transfer them over with a root file explorer because, other than the fact that many of them will be in use and it will cause some problems, for some reason I am able to VIEW the Symbolic Link base.apk files in the "app" folder, but not SAVE them. =(
So LINK2SD will probably still not recognize the phone as having them.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE:
Upon educating myself further I have come to understand that the reason I cannot save or see the symbolic links on Windows is because they are not supported on FAT type systems. I also learned that I am able to create the symbolic link manually on Android using some commands in Terminal. However, I'd rather not manually type out 300 lines of code on my phones keyboard. So I was thinking maybe I could use an SD adapter to insert it into my PC and take a look at the 2nd partition to get the paths for the apks, then write a shell script or something to automate the creation of the symbolic links. BUT, and there always seems to be one... Not all or all parts of the apps were moved to JUST the second partition using LINK2SD, some are on the first. I would also have to deal with apps that are already installed on the phone...when writing the script. There will be conflict with apps like Chrome and YouTube that come with the phone, but are also linked. Ugh... Maybe tomorrow I'll get this sorted... 3AM. Need sleep.
Edit: Honestly, there is probably just a way to fix the userdata.img so it can be flashed back onto the phone. Really hope someone will read this and educate me on how.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have 2 android tvboxes and i want to exchange them the remote controls.
1) H9x3 with Slimbox firmware
2) VONTAR X3 with Slimbox firmware
I have the 2 files remote.conf. I tried to copy the files on /etc folder but are read only. Also there is not remote.conf files in /etc folder.
Has anyone any idea how i do that ?
Unfortunately, it's much more difficult than just copying the remote.conf files but not impossible. I've just done the same thing. Firstly, you need to be rooted. Secondly, you need to have access to the box via adb, Thirdly, you need to use a root file explorer like X-plore which is included in slimbox fw. Have a look here:
H96 MAX X3 (S905X3) [Android] - 4PDA
H96 MAX X3 (S905X3) [Android], [TV Box][Amlogic S905X3]
4pda.ru
You will definitely need a couple of hours if not more.
Thanks i will give a try. At first glance, I think the most difficult part is that it is in Russian language.
Just use Google translate. I can help you with the files for my remote to get a better idea of how they should look like.
That would be helpful.
In /vendor/etc/init/hw/init.amlogic.rc I added this line:
Code:
service remotecfg1 /vendor/bin/remotecfg -c /vendor/etc/remote_tanix.cfg -t /vendor/etc/remote_tanix.tab -d
class main
oneshot
seclabel u:r:remotecfg:s0
I added remote_tanix.cfg and remote_tanix.tab in /vendor/etc with 644 rights. remote_tanix.cfg is basically the same as remote.cfg. remote_tanix.tab was created using dmesg output after pressing the buttons on a Tanix remote which I wanted to use with my h96 max x3 box.
I think that something is wrong with my remote.tab file or something missing.
I have these errors when push buttons from remote control
Code:
[ 1175.201851] <3>[ [email protected]] meson-remote ff808040.rc: invalid custom:0xbd42df00
[ 1175.202336] <3>[ [email protected]] meson-remote ff808040.rc: cur_custom is nulll
[ 1175.207881] <3>[ [email protected]] meson-remote ff808040.rc: no valid key to handle
[ 1208.559821] <3>[ [email protected]] meson-remote ff808040.rc: invalid custom:0xf906df00
[ 1208.560346] <3>[ [email protected]] meson-remote ff808040.rc: cur_custom is nulll
[ 1208.565872] <3>[ [email protected]] meson-remote ff808040.rc: no valid key to handle
Code:
HOME -> 0xbd42df00
OK -> 0xf906df00
I used remote-0xfа00.tab from 4pda.ru seems are same remote control
Your remote code is df00 but the code of the remote tab you downloaded is fа00 assuming 0xfа00 in the file name is remote code. Check if you have 0x42 and 0x06 in the tab file. I'm positive you won't find them because otherwise you wouldn't have that error if your tab file was correct.
Perfect, you are right. I changed ff00 with df00 and detected the remote control.
I have found all buttons codes.
I think the only i must found, is the key number (2,3,4,etc.). How can i found them ?
Code:
0x54 2 #1
0x16 3 #2
0x15 4 #3
0x50 5 #4
0x12 6 #5
0x11 7 #6
0x4c 8 #7
0x0e 9 #8
0x0d 10 #9
0x0c 11 #0
If i use the following code, it will work ?
Code:
0xdf1a KEY_UP
0xdf48 KEY_DOWN
0xdf47 KEY_LEFT
0xdf07 KEY_RIGHT
Code:
0x54 2 #1
0x16 3 #2
0x15 4 #3
0x50 5 #4
0x12 6 #5
0x11 7 #6
0x4c 8 #7
0x0e 9 #8
0x0d 10 #9
0x0c 11 #0
This should work fine according to your button codes.
You can find the Linux codes in /root/vendor/usr/keylayout/Vendor_0001_Product_0001.kl
Linux key for number 1 is 2 etc.
Code:
0xdf1a KEY_UP
0xdf48 KEY_DOWN
0xdf47 KEY_LEFT
0xdf07 KEY_RIGHT
No. You erase 2 characters after 0x and replace them with the next 2.
Code:
0x1a 103 #KEY_UP
0x48 108 #KEY_DOWN
0x47 105 #KEY_LEFT
0x07 106 #KEY_RIGHT
Finally i did it. It was a bit time consuming but the result pleased me.
Thank you very much for your help !!
I will upload the 2 files if anyone want them in the future.
Also, the remote control df00 to work the 2 buttons APPLICATION_SWITCH & MEDIA_PLAY_PAUSE, i did add the line
Code:
key 0 MOUSE
in /root/vendor/usr/keylayout/Vendor_0001_Product_0001.kl
I don't know why it needed that line, but without this line, didn't detect these 2 buttons.
hello, how can i fix Enter in external keyboard, like this
Post in thread '[v7.5] Aidan's ROM [S905X] [ATV 7.1.2] (Lag & Bloat Free, Pre Rooted, Samba & Miracast) [TV NETFLIIX] 2021 Update!' https://forum.xda-developers.com/t/...tv-netfliix-2021-update.4104869/post-87228333
1) In /vendor/etc/init/hw/init.amlogic.rc add this
Code:
service remotecfg1 /vendor/bin/remotecfg -c /vendor/etc/remote.cfg -t /vendor/etc/remote_df00.tab -d
class main
oneshot
seclabel u:r:remotecfg:s0
2) Add the files remote.cfg and remote_df00.tab in /vendor/etc with 644 rights.
3) in /root/vendor/usr/keylayout/Vendor_0001_Product_0001.kl add the line
Code:
key 0 MOUSE
4) Reboot and test
vag13 said:
1) In /vendor/etc/init/hw/init.amlogic.rc add this
Code:
service remotecfg1 /vendor/bin/remotecfg -c /vendor/etc/remote.cfg -t /vendor/etc/remote_df00.tab -d
class main
oneshot
seclabel u:r:remotecfg:s0
2) Add the files remote.cfg and remote_df00.tab in /vendor/etc with 644 rights.
3) in /root/vendor/usr/keylayout/Vendor_0001_Product_0001.kl add the line
Code:
key 0 MOUSE
4) Reboot and test
Click to expand...
Click to collapse
ok thank you very much
vag13 said:
1) In /vendor/etc/init/hw/init.amlogic.rc add this
Code:
service remotecfg1 /vendor/bin/remotecfg -c /vendor/etc/remote.cfg -t /vendor/etc/remote_df00.tab -d
class main
oneshot
seclabel u:r:remotecfg:s0
2) Add the files remote.cfg and remote_df00.tab in /vendor/etc with 644 rights.
3) in /root/vendor/usr/keylayout/Vendor_0001_Product_0001.kl add the line
Code:
key 0 MOUSE
4) Reboot and test
Click to expand...
Click to collapse
I did what was written, the result did not see a negative control
Resim Yükle, Herkesle Paylaş - resimyukle.io
resimyukle.io
If I give you a teamviewer id, can you connect remotely and help?
IMG_20220805_001250
Image IMG_20220805_001250 hosted in IM.GE - Free Image Hosting - Upload Image & Share
im.ge
IMG_20220805_001354
Image IMG_20220805_001354 hosted in IM.GE - Free Image Hosting - Upload Image & Share
im.ge
I think that your remote is not same with mine.
Try to connect via adb and find the correct code of your remote https://forum.xda-developers.com/t/exchange-the-remote-control-from-2-tv-boxes.4265345/post-84891999
sarigol45 said:
If I give you a teamviewer id, can you connect remotely and help?
IMG_20220805_001250
Image IMG_20220805_001250 hosted in IM.GE - Free Image Hosting - Upload Image & Share
im.ge
IMG_20220805_001354
Image IMG_20220805_001354 hosted in IM.GE - Free Image Hosting - Upload Image & Share
im.ge
Click to expand...
Click to collapse
Sorry, i don't use teamviewer.
The remote is working on slimbox atv 12.2 rom, can you check if I upload these files here?
Can you edit these files? I uploaded the working files.
root/vendor/etc
root/vendor/etc/init/hw
root/vendor/usr/keylayout
slimbox 12.2.rar
drive.google.com