So here's the tep by step guide how to Root Leagoo t10... (Thanks to coolkillermax for cooperation)
Unlock the bootloader (Unlock will Factory reset Erase all internal data so beware and backup you important DATA before do it)
1. install PdaNet drivers on your windows OS system (Ask google & get It)
2. download fastboot here https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view & instalL fastboot program folder than will get 4 files
2. turn off the phone
3. hold the volume up button and insert the usb cable to connect to the pc
4. the phone starts at that point to STOCK recovery mode and using volume key select to reboot to bootloader.
5. than find ADB folder on your computer than open it than press shift+right click mouse to "open command window here"
6. command "fastboot devices" to see if the drivers are ok) and use the command "fastboot oem unlock" to unlock the bootloader
7. now the phone asks if you really want to unlock it so put in yes using volume key to select
8. Phone will stuck or hang at Fastboot mode 3 selection, than if more than 5 minute just force press power button to reboot or give in the command on your PC "fastboot reboot"
8. The bootloader is unlocked (when starting, the phone shows that its been unlocked)
For root
1.Download TWRP here https://drive.google.com/file/d/0By1jTvBbOoCxQ1JNZEkyYmt0dVU/view
2.Download SUperSU here http://www.supersu.com/download select latest Zip to download
3.Put TWRP recovery.img into same ADB folder PC (the folder where that fastboot program is) and rename it to TWRP.img
4.Put SuperSU in phone internal storage or SD Card
5.boot to bootloader same method as above
6.Go into ADB folder press shift+right click mouse to "open command windows here" : command "fastboot boot TWRP.img"
7.You will see TWRP success & in TWRP install the SuperSU zip (I used 2.82)
8.reboot to system and enjoy...
(9. The TWRP recovery will be overwritten (if flashed, which we didn't in this guide) by the default recovery on boot but the Root will stay...)
At this point I already sold my Leagoo t10 so I won't be capable to test any new guides if asked...
Leagoo T10 software
It would be also helpful to point me to a webpage where I can find some firmware or other software for t10 beacuse I have trouble finding anything for t10 even on the Leagoo webside...
Thanks.
Black_p3 said:
It would be also helpful to point me to a webpage where I can find some firmware or other software for t10 beacuse I have trouble finding anything for t10 even on the Leagoo webside...
Thanks.
Click to expand...
Click to collapse
no hay nada en la web del t10, es muy nuevo, estoy pensando en comprarmelo que te a parecido y la camara es buena de noche.
This issue is solved now... The way how to do it is described in the "leagoo t10 unlock bootloader" thread. Here's the link... https://forum.xda-developers.com/ge...bootloader-unlock-t3629793/page2#post73815413
Here is the full way how to do it...
1. Unlock the bootloader...
1.1 install PdaNet drivers on your win system (you will need also ADB and fastboot)
1.2 boot to bootloader
1.2.1 turn off the phone
1.2.2 hold the volume up button and insert the usb cable to connect to the pc
1.2.3 the phone starts at that point to recovery mode and after it reboot to bootloader (from recovery)
1.3 then use the basic fastboot program (command "fastboot devices" to see if the drivers are ok) and use the command "fastboot oem unlock" to unlock the bootloader
1.4 now the phone asks if you really want to unlock it so put in yes
1.5 The bootloader is unlocked (when starting, the phone shows that its been unlocked)
2. Download the TWRP from the link Alpha232 gave (it's for LG K10 but it works) in this diskussion https://forum.xda-developers.com/general/help/leagoo-t10-help-bootloader-unlock-t3629793
3 Root
3.1 boot to bootloader
3.2 run twrp: command "fastboot boot <image name>"
3.3 in TWRP install the SuperSU zip (I used 2.82)
4.4 reboot to system and enjoy...
I forgot to mention that to unlock the bootloader you have to activate developer options on your phone (push built number several times) and turn "OEM unlocking" on (in developer options)
Thanks a lot for all these information
You worked hard for that
I haven't received mine yet, I hope that it'll be a success for me too
Leagoo T10 can lock it back for bootloader ?
Hi All,
Check my simple unboxing here = https://youtu.be/nHHOJE8KU3M
Seem you guys have method can unlock bootloader & is it anyway can unroot & locked back bootloader to get New OTA if available ? May Be nougat...?
I heard some rumors that the T10 was badly selling and that there will be no OS updates because of that... I hope it's not true but there were some signs of that, for example the T10 was not mentioned on the official Leagoo website for a long time after it came out and was added only recently...
That was the reason I didn't bother trying to root through MAGISK which would allow updates...
As I said I hope it's not true because it's a really good phone for a great price... (And it's the only one in this price/performance category with SD card support)
Black_p3 said:
I heard some rumors that the T10 was badly selling and that there will be no OS updates because of that... I hope it's not true but there were some signs of that, for example the T10 was not mentioned on the official Leagoo website for a long time after it came out and was added only recently...
That was the reason I didn't bother trying to root through MAGISK which would allow updates...
As I said I hope it's not true because it's a really good phone for a great price... (And it's the only one in this price/performance category with SD card support)
Click to expand...
Click to collapse
Thanks for good input,:good: can you give link how to use MAGISK to have same access like root ?
As I said I haven't tried it myself but there are guides on the XDA forums how to do it... A friend of mine is using MAGISK for root access on another phone and it's working for him...
Black_p3 said:
As I said I haven't tried it myself but there are guides on the XDA forums how to do it... A friend of mine is using MAGISK for root access on another phone and it's working for him...
Click to expand...
Click to collapse
Oh... Really ? Sorry & i did not notice... My SD card is class 10 card but failed format as internal so Is it Your phone SD card can format as internal ? What type of SD card is working ?
Be careful with the SD card... I had my 128 GB class 10 U1 formated as internal with my T10 (it was working fine), then I wanted to format it as regular SD and something went wrong by that process... The card is absolutely unusable now (I tried many solutions I found on the web but none worked...). Now I have an 64 class 10 inserted and using it without the internal format and the 32 GB internal storage is enough for me now...
Black_p3 said:
Be careful with the SD card... I had my 128 GB class 10 U1 formated as internal with my T10 (it was working fine), then I wanted to format it as regular SD and something went wrong by that process... The card is absolutely unusable now (I tried many solutions I found on the web but none worked...). Now I have an 64 class 10 inserted and using it without the internal format and the 32 GB internal storage is enough for me now...
Click to expand...
Click to collapse
oh that's good info & did u put your 128gb sd card to other phone to format it ? hope this help u...
My issue is different- my 32GB class 10 sd during format as internal just until 20% than will show " could not erase sd card" so just can format as normal external storage…
can i know your128gb U1 sd card is it same as UHS card ?
Sent from my Lenovo S920 using xda premium
I tried almost everything possible with that SD card. Formating in other devices said that the card is write protected... I inserted it to my notebook and tried to remove the write protection by many means like through regedit, low level formating and so on but nothing helped... Finally I gave up... I don't know exactly how the issue happen but I remember that after formating the card, the phone was still listing the card as internal and I gave the command to forget it while it was inserted in my T10 and I believe that could be the reason that created that mess... (So don't do that, the forget function I mean)
Both cards I used were SDXC so maybe your 32 SDHC isn't compatible to be formated as internal memory but you should try to erase the card first if it gives you that error...
By the way... Have you used MAGISK yet? Did it work? As I said I used normal root (installed supurSu zip from booted recovery) so I won't try that now...
lurol said:
Thanks a lot for all these information
You worked hard for that
I haven't received mine yet, I hope that it'll be a success for me too
Click to expand...
Click to collapse
Has it arrived yet and did the rooting work?
coolkillermax said:
oh that's good info & did u put your 128gb sd card to other phone to format it ? hope this help u...
My issue is different- my 32GB class 10 sd during format as internal just until 20% than will show " could not erase sd card" so just can format as normal external storage…
can i know your128gb U1 sd card is it same as UHS card ?
Sent from my Lenovo S920 using xda premium
Click to expand...
Click to collapse
U1 is the UHS class (10MB/s minimum write speed).... (There is also U3 class which is 30/s)
By the way... Have you used MAGISK yet? Did it work? As I said I used normal root (installed supurSu zip from booted recovery) so I won't try that now...
coolkillermax said:
oh that's good info & did u put your 128gb sd card to other phone to format it ? hope this help u...
My issue is different- my 32GB class 10 sd during format as internal just until 20% than will show " could not erase sd card" so just can format as normal external storage…
can i know your128gb U1 sd card is it same as UHS card ?
Sent from my Lenovo S920 using xda premium
Click to expand...
Click to collapse
And actually that was the same error I got when I destroyed my card... I hope that it's not the same situation...
Hi. Yes I have received it and I am very glad with it. Not perfect as the quality of the sound is not very fine. The notification LED is too discreet too. But It is totally stable, and given the price I paid for it I do no regret.
I haven't yet had enough time to try to root it. This is something that I do not do everyday... So I want to be concentrated before starting...
Related
Hi there
Im new to the forum, but I have tried and wasted hour after hour but I cannot root my G2 which is locked to T-Mobile UK and has the 2.73.110.26 CL#69351 release keys software. This software is impossible as it means that I cannot follow the instructions to root the device (as listed on unlockr.com). This is because I have to downgrade the software to 1.76.110.6 in order for the flashrec software to install. So I downloaded the 1.76.110.6 software (update-hero-t-mobile-1.76.110.6-signed.zip) from this link:-
and followed the instructions here:
The patched recovery image is your gateway to Custom ROM installs and all sorts of cool stuff... here's how to install it onto your device.
- download this file and extract it to your PC or mac
- open a command prompt to the directory containing the extracted files
- type the following commands appropriate to your device / pc...
GSM Hero (a Hero with a SIM card - e.g. the European Hero) on WINDOWS
CODE
adb-windows shell reboot bootloader (wait for device to reboot into bootloader)
fastboot-windows boot recovery-RA-hero-v1.5.2.img (wait for device to boot into recovery)
install-recovery-gsm-windows.bat
but the when im in the command prompt window i cd to the correct folder where the recovery image is and it the phone goes into the bootloader ok but then it does not recognise the second line which is:
fastboot-windows boot recovery-RA-hero-v1.5.2.img (wait for device to boot into recovery)
as it says it does not recognise the fastboot command so I cannot follow this method to downgrade either? I am using Windows XP.
I do not have an sd card reader on my pc or a micro sd card to sd adapter so cannot follow the goldcard method either
I just dont know how to install the the update-hero-t-mobile-1.76.110.6-signed.zip file which I downloaded.
Could someone give me a step by step follow through on how i can root my device in basic english so I can understand and root this **** thing before i sell it and buy an iphone?????
Thanks.
u do not need a card reader to do the goldcard. Use your phone in mass storage mode
Follow the link in my sig, i had the same phone with the same ROM, good luck
Many thanks for that guide mate it was excellent and very easily written and very detailed. I will refer this link if I see anyone else with the same issue.
However, I have just flashed the cronos 1.5 image and am running it now but could not partition the sd card as was suggested to do before flashing. I tried to use the guide suggested in your post and managed to make the first partition ext2 with 1024 MB and the 2nd partition fat32 for the rest of the card. But then when I put the ROM image on the card and rebooted into recovery mode in order to flash the cronos ROM, the recovery mode could not find the ZIP file on the card so I had to format the card and remove all partitions and them I put the cronos ROM file on the empty card and rebootted into recovery and flashed the cronos ROM successfully.
But for some reason it does not automatically update my time and date any more even though I have set it up to update automatically and does not find my current location any more?
What benefits do I get by partitioning the card and how do I do this? Also the phone
Also, I just formatted the sd card but when I boot up using the home and power buttons it still boots up into the RA 1.5.2 recovery image so this means the phone is still rooted right, but how does it do this when there is nothing on the sd card or phone? Even if I take out the card can I still get root access by going into recovery mode?
Also is the 1.5.2 recovery the best one or is there a better one out there? If so how do I upgrade the root recovery image?
realist77 said:
Hi there
Could someone give me a step by step follow through on how i can root my device in basic english so I can understand and root this **** thing before i sell it and buy an iphone?????
Thanks.
Click to expand...
Click to collapse
I have to say, I love that quote,
p.s I have answered your questions in the guide thread
Hi All
I've purchased the Aria for my wife, got it on Ebay today and now i'm trying to install a new ROM for it, without much success, I have 15 different chrome tabs open, and I think I've kinda need help now, here's what I did :
i've been following http://forum.xda-developers.com/showthread.php?t=1159237 mainly, since I saw it's for 2.2.2.
I managed to S-Off successfully, and install CWM, but failed at actually getting CWM to work, after a long troubleshooting, I discovered I still don't have my phone rooted (downloaded titanium backup to verify it).
so I went over and looked at the root guide using unrEVOked Recovery - it does it's things and reboot the phone twice during the process, but then it says "unable to root, firmware is too new ?"
so I figured I might have an odd firmware, tried installing the one from HTC Website, it didn't seem to work either (failed to install) but I didn't troubleshoot it much since I saw that the version HTC has is exactly the same one I was had.
at this point, I ready many guides, but seen no one with the same Root problems I had, so i'm hoping any1 can direct me to the next steps, what am I doing wrong ?
here's some data from the bootloader screen, incase you need it :
Liberty PVT Ship S-Off
HBOOT-6.02.1002
MICROP-031b
Touch Panel-STN21_00
Radio-7.16.35.11
Nov 4 2010
Thanks
The S-OFF portion was successful, so at least you got that far. S-OFF does NOT automatically give you root.
Unrevoked will not work on your device because it only works on older devices that have HBOOT version 0.57.00. That's what the error message there meant. That's fine though, you don't need to use Unrevoked.
If you have HTC Sync installed, uninstall it. Then follow these instructions: http://forum.xda-developers.com/showthread.php?t=1122694 (the first 6 steps only)
drumist said:
The S-OFF portion was successful, so at least you got that far. S-OFF does NOT automatically give you root.
Unrevoked will not work on your device because it only works on older devices that have HBOOT version 0.57.00. That's what the error message there meant. That's fine though, you don't need to use Unrevoked.
If you have HTC Sync installed, uninstall it. Then follow these instructions: http://forum.xda-developers.com/showthread.php?t=1122694 (the first 6 steps only)
Click to expand...
Click to collapse
thanks for the fast response.
did the first 6 steps (cwm installation) using recovery img from CWM 2.517 , went fine, but still can't load any ZIP files using CWM, it says "no zip files found".
basically same as before.
so when you boot it into cwm then go install zip from sd nd comfirm it all, it comes up with "no zip files found"
madsnake53 said:
so when you boot it into cwm then go install zip from sd nd comfirm it all, it comes up with "no zip files found"
Click to expand...
Click to collapse
I don't even get to confirm it before I get this message.
it's like CWM have no access to the SD Card.
NirXY said:
I don't even get to confirm it before I get this message.
it's like CWM have no access to the SD Card.
Click to expand...
Click to collapse
oh okay then well...
so you choose the "install zip from sdcard"?
not the "apply sdcard:update zip"
then it comes up with that error
madsnake53 said:
oh okay then well...
so you choose the "install zip from sdcard"?
not the "apply sdcard:update zip"
then it comes up with that error
Click to expand...
Click to collapse
yea, that's right.
alright im not quite sure of the problem but i have let someone know who is a developer of the aria know. attn1 is very well known he will fix your problem very quickly
It sounds to me like Clockworkmod was successfully installed.
Some things to try:
1) Boot up your phone normally and confirm that you are able to read/write from the SD card.
2) Try doing a Nandroid backup. When it does the backup it should write to the SD card. See if you get any errors during this process.
3) Try removing the SD card you have in the phone now and making sure it's seated properly.
4) If that doesn't fix your problem, try reformatting the SD card using this tool (specifically this tool, as it is designed to fix bad SD card formats) - http://www.sdcard.org/consumers/formatter_3/SDFormatterv3.0.zip. To use this tool you need to have an SD card reader on your computer (you can't do it through your phone)
5) If THAT doesn't work, try using a different SD card.
Good luck.
drumist said:
It sounds to me like Clockworkmod was successfully installed.
Some things to try:
1) Boot up your phone normally and confirm that you are able to read/write from the SD card.
2) Try doing a Nandroid backup. When it does the backup it should write to the SD card. See if you get any errors during this process.
3) Try removing the SD card you have in the phone now and making sure it's seated properly.
4) If that doesn't fix your problem, try reformatting the SD card using this tool (specifically this tool, as it is designed to fix bad SD card formats) - http://www.sdcard.org/consumers/formatter_3/SDFormatterv3.0.zip. To use this tool you need to have an SD card reader on your computer (you can't do it through your phone)
5) If THAT doesn't work, try using a different SD card.
Good luck.
Click to expand...
Click to collapse
Genius !
formatted the SD card using the tool, but then the Aria said it's damaged, reformatted using the Phone, rebooted to recovery and CWM managed to see files, installed SU successfully.
Thanks alot !
You haven't by chance bought your SD card off eBay have you?I'm asking because there's a ton of b.s. SD cards on the net.I myself got one through bestofferbuy.looked okay unless you tested it or went over 1.7gb
Sent from my Liberty using XDA App
I didn't bought it off ebay, but it was never a physical problem with the SD Card, since I took it off my SGS2 and moved it to my wife phone, I guess I needed to format it before I Tried to use it, what confused me is that I had no issues accessing the card from the PC or from the phoen itself (Astro for example), but the CWM didn't like it at all.
anyway, i'd suggest to read reviews and feedbacks about SD Cards, I got mine from newegg, it's a Patriot Class 10 card, a bit overkill, but cheap considering its high-end card.
My nook tablet is bricked
Turn on the tablet will see the screen will a big n
and nothing happen
I tried to boot from sdcard but it seem don't recognize the sdcard during boot
putting zip files on sdcard is not working
CWM sdcard and ubuntu sdcard also not working
cannot get into CWM and how can I fix it?
I spend over 5 hours but nothing work......
Sometimes the SD Card boot "only" works by plugging in the nook power cable.
I tried more than 50 times by plugging the power cable and still the same....
BTW thank you for answering, if you have any other method, once I can do it, I will try it....
Is the Nook store near by ?
Sad to say no...
I am from Hong Kong....
What SD card are you using, i.e. Class and brand.
The higher class cards do not work all that well for booting from. The Sandisk Class 4 card, any size I imagine, works well for booting off card.
Not sure if this is your problem, but trying a different card my be a good direction to go for a fix, if you can get into CWM it will help.
Also, what specifically did you do/try to get yourself to this point? Always helps to know how you broke it to be able to fix it.
I am using sandisk class sd card
This happen will I try to change back from CM9 with new kernel and TWRP to CWM and CM7.2
After flashing CM7.2 and CWM, it successfully boot for once and then get into this situation on next reboot
I tried ubuntu recovery, sdcard version CM7.2 and this, but nothing work....
It looks like you have a similar problem to this http://forum.xda-developers.com/showthread.php?p=27381972. I think, form skimming over the thread they were able to get into CWM from sdcard - after many attempts. If you can get to that point you should be able to get an adb connection where as you can work your way out of this. Just read the linked thread, it should point you in the right direction.
Good Luck
I tried more than 100 times still noting happen
But when plugging in the power cable and boot the tablet, the indicator keep orange light and not green as it is in that post...
more options
what sdcard version of CWM are you using? you should try with another sdcard just in case, the procedures for a succesful CWM sdcard are the following:
For Windows users:
- Power off your NT and remove sdcard
- Put your sdcard into a card reader (preferably)
- Format your sdcard with SDFormatter https://www.sdcard.org/downloads/formatter_3/eula_windows/ (recommended) or any other but not windows native.
- Download latest Win32DiskImage-binary.zip from https://launchpad.net/win32-image-writer/+download (v5.0 recommended)
- Unzip the file
- Run Win32DiskImage.exe - Right click "run as administrator"
- Click the folder button and navigate to select the .img file you just unzipped.
- Click on the disk drive letter label on the right, and choose the letter that corresponds to your SD card.
- Press Write. When it finishes, press Exit.
- Safely eject/remove your sdcard and put it back to your NT
- Plug your device to the a/c power or PC using the USB cable, let it power on by itself do not press any button.
WARNING: This will completely erase your microSD card. Be sure to back it up!
Click to expand...
Click to collapse
You may also want to try the unbrick methods posted by @succulent here in his repo - Original Thread (PLease READ)
flash-restore-stock.zip could be useful for you
~ V
I can now go into the recovery by using a new transcend class 10 card
But I after I flash flash_stock_recovery.zip and CM7, it still behave the same
Still showing the big n and nothing loaded....
slxar said:
I can now go into the recovery by using a new transcend class 10 card
But I after I flash flash_stock_recovery.zip and CM7, it still behave the same
Still showing the big n and nothing loaded....
Click to expand...
Click to collapse
OK let me get in puter I have other options. Obviously something in the boot process is corrupted
Edit: back!
Please try the following:
1. Verify the md5sum the ROM(s) you want to install just to make sure is not corrupted
2. Follow the instructions i posted in here to flash another CWM to discard CWM being part of the problem. Now as you already have the CWM sdcard you just need to add 8gb-16gb_cwm_internal.zip to the sdcard then boot again into CWM sdcard and flash that package
3. After that remove your sdcard and select reboot system now from the CWM menu, if your device boots fine then Congrats, if not then read the options below:
4. Read and try this. If no go, goto #5:
5. Read and try this
LAST RESOURCE:
6. [unbrick] - Fixing partition table, or completely dead nook. Use this ONLY if you have the 16GB model as you did not mention that detail in your posts i'm giving you a warning!
~ V
Sent from my SGH-I897 using Tapatalk 2
method 4 and 5 not working and I can't download a file told in method 6 here, the second file show 404...
slxar said:
method 4 and 5 not working and I can't download a file told in method 6 here, the second file show 404...
Click to expand...
Click to collapse
Right i forgot to add that @meghd00t's cwm sdcard already contain the 2 files (tools) that @soshite was talking about , so basically you just need the cwm sdcard, my partition images and adb working.
BTW what happened with option 2-3?
~ V
Sent from my SGH-I897 using Tapatalk 2
after trying option 6, the tablet now can boot into internal CWM
But after I flash CM7, it still keep booting into CWM rather than CM7....
Thanks for all, I can now get into the stock 1.4.0
I flash the flash-restore-stock.zip from here in CWM
and then using acclaim_update.zip to restore the tablet back to 1.4.0
I guest I may change the boot data and get mess up with it
Finally, thanks again for all help:laugh:
Yeah, for everyone else out there:
You must have stock recovery in order for the acclaim_update.zip to work.
hello guys,
i am a new android user and it is second time for me to root/flash room, my nook tablet was rooted and when i tried to flash cm 10.2, tablet won't boot from sd card, so i press n + power bottom(as someone said it can help tablet go to cwm recovery 6.0) i believe i hold 10-15 second, and i accidentally replease one of the bottom, n or power, i am not sure.. so my nook become as brick. every time i turn it on, it says i need to reboot again, if doesn't work i need to contact to nook customer service.
now, i have used two method so far, ubantu and cwm recovery, they seem not working at all(the tablet won't let me in to cmw v6.x when it was not bricked),and i tried the last one and only one that was use repary.img to recover(which is newest method in 2012,i am not sure if there a way way other than this) repart.img won't unzipped on my computer, my computer is win7 64 bit,the zip said,"unexpected ending of this archive"
what that mean?it means i am only one cannot unzipped the file in that thread.
by the way, i can still go to cwm 5.0 for my root-format sd card, but not the recovery sd card or anything else, HELP!!! it has been whole day!
kelloco said:
hello guys,
i am a new android user and it is second time for me to root/flash room, my nook tablet was rooted and when i tried to flash cm 10.2, tablet won't boot from sd card, so i press n + power bottom(as someone said it can help tablet go to cwm recovery 6.0) i believe i hold 10-15 second, and i accidentally replease one of the bottom, n or power, i am not sure.. so my nook become as brick. every time i turn it on, it says i need to reboot again, if doesn't work i need to contact to nook customer service.
now, i have used two method so far, ubantu and cwm recovery, they seem not working at all(the tablet won't let me in to cmw v6.x when it was not bricked),and i tried the last one and only one that was use repary.img to recover(which is newest method in 2012,i am not sure if there a way way other than this) repart.img won't unzipped on my computer, my computer is win7 64 bit,the zip said,"unexpected ending of this archive"
what that mean?it means i am only one cannot unzipped the file in that thread.
by the way, i can still go to cwm 5.0 for my root-format sd card, but not the recovery sd card or anything else, HELP!!! it has been whole day!
Click to expand...
Click to collapse
Hi,
you need a clean copy of the repart.image.
http://d-h.st/5vJ
instruction thread here: http://forum.xda-developers.com/showthread.php?t=1663836
the repart.img sd card has been the most dependable way for me to reset any nook tablet , 8 or 16gb to stock.
I'd say get the latest copy of the img file, and burn it to a CLASS 4 Sandisk card
my experience is higher or lower class cards are often not as good for booting from NOOK tablets
if you erased the /system folder accidentally and di not reinstall an operating system, then the tablet will try to boot into recovery
if you erased the /factory partition accidentally, then even with a good recovery partition, the recovery will fail
mikeataol said:
Hi,
you need a clean copy of the repart.image.
http://d-h.st/5vJ
instruction thread here: http://forum.xda-developers.com/showthread.php?t=1663836
the repart.img sd card has been the most dependable way for me to reset any nook tablet , 8 or 16gb to stock.
I'd say get the latest copy of the img file, and burn it to a CLASS 4 Sandisk card
my experience is higher or lower class cards are often not as good for booting from NOOK tablets
if you erased the /system folder accidentally and di not reinstall an operating system, then the tablet will try to boot into recovery
if you erased the /factory partition accidentally, then even with a good recovery partition, the recovery will fail
Click to expand...
Click to collapse
i have no idea which situation i am now..i hope not second one,yesterday i just could not unzip the repart.img... the winrar keeping saying the archeive has expect ending. i downloaded several times with ie firefox chrom.i think the .zip has something wrong with the win 7 64bit .i finally download and unzipped it on my cell phon(thank you google phone),i will try to move the img to my computer and burn it..see you latter
kelloco said:
i have no idea which situation i am now..i hope not second one,yesterday i just could not unzip the repart.img... the winrar keeping saying the archeive has expect ending. i downloaded several times with ie firefox chrom.i think the .zip has something wrong with the win 7 64bit .i finally download and unzipped it on my cell phon(thank you google phone),i will try to move the img to my computer and burn it..see you latter
Click to expand...
Click to collapse
i just tried to use the repart.img. it says the software is install successfully(green mark on the top) i remove the sd, but failed in rebooting .screen says contact the nook...thank you any way..
mikeataol said:
Hi,
you need a clean copy of the repart.image.
http://d-h.st/5vJ
instruction thread here: http://forum.xda-developers.com/showthread.php?t=1663836
the repart.img sd card has been the most dependable way for me to reset any nook tablet , 8 or 16gb to stock.
I'd say get the latest copy of the img file, and burn it to a CLASS 4 Sandisk card
my experience is higher or lower class cards are often not as good for booting from NOOK tablets
if you erased the /system folder accidentally and di not reinstall an operating system, then the tablet will try to boot into recovery
if you erased the /factory partition accidentally, then even with a good recovery partition, the recovery will fail
Click to expand...
Click to collapse
i just tried to use the repart.img. it says the software is install successfully(green mark on the top) i remove the sd, but failed in rebooting .screen says contact the nook...thank you any way..
kelloco said:
i just tried to use the repart.img. it says the software is install successfully(green mark on the top) i remove the sd, but failed in rebooting .screen says contact the nook...thank you any way..
Click to expand...
Click to collapse
sorry to hear that.
I have a similiar tablet, something has triggered the flash ram to not accept any writes
see: http://forum.xda-developers.com/showthread.php?t=2663470
I have seen the problem on other devices (gps's) , but only once on 100 NOOK tablets
I am a complete newbie to rooting. I followed the kingoroot guidelines and rooted my Idea Aurus 3 phone. Root was success. The next step I did was downloading custom recovery and cyanogenmod ROM from here to my memory card
I flashed the custom recovery with flashify. The next step I did was wiping all data from the device by entering in to recovery mode (including cache and everything)
I was hoping I could simply install zip from sd card. But when i click on this option, I cannot find my sd card nor zip file (I checked most folders including emmc, etc, sd-ext and couldn't find SD card. The custom recovery name is Phylz touch 6
Now basically I have a phone without OS and all I can do is accessing custom recovery. I don't have a back up too
I can also see an error log "Cannot mount custom path"
I formatted the memory card to exFAT from FAT 32 hoping that would work, it didn't help as well.
Also tried to connect phone to pc using USB (thinking I can move rom to system memory), but wouldn't detect phone memory
Now, is there any way to get this fixed? Any help would be awesome
Thanks!!!
Mount USB option is how you see phone from computer if I remember correctly I haven't used cwm in awhile I always use twrp
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
kumarj said:
I am a complete newbie to rooting. I followed the kingoroot guidelines and rooted my Idea Aurus 3 phone. Root was success. The next step I did was downloading custom recovery and cyanogenmod ROM from here to my memory card
I flashed the custom recovery with flashify. The next step I did was wiping all data from the device by entering in to recovery mode (including cache and everything)
I was hoping I could simply install zip from sd card. But when i click on this option, I cannot find my sd card nor zip file (I checked most folders including emmc, etc, sd-ext and couldn't find SD card. The custom recovery name is Phylz touch 6
Now basically I have a phone without OS and all I can do is accessing custom recovery. I don't have a back up too
I can also see an error log "Cannot mount custom path"
I formatted the memory card to exFAT from FAT 32 hoping that would work, it didn't help as well.
Also tried to connect phone to pc using USB (thinking I can move rom to system memory), but wouldn't detect phone memory
Now, is there any way to get this fixed? Any help would be awesome
Thanks!!!
Click to expand...
Click to collapse
download ur rom again.
put it on another sd card and flash the rom from sd.
or there's always a way to flash stock
If u were on philz 6, u cud just hit 'clean
to install a new rom ' and flash ur rom without wiping extra anything.
[email protected] said:
Mount USB option is how you see phone from computer if I remember correctly I haven't used cwm in awhile I always use twrp
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Click to expand...
Click to collapse
Mount USB option is not there in the Mount section
Do you mean external sd card or internal SD card if you have a external sd card pop it out of your phone and use an SD card adapter on a pc and place the ROM and appropriate gapps on it
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
[email protected] said:
Do you mean external sd card or internal SD card if you have a external sd card pop it out of your phone and use an SD card adapter on a pc and place the ROM and appropriate gapps on it
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Click to expand...
Click to collapse
I mean external sd card. The ROM is in external sd card, but i cannot see it in recovery mode.
Also, I just tried to sideload rom by using sdk tools.
The result i got was:
C:\Program Files (x86)\platform-tools>adb sideload cm-12-20150320-OFICIAL-5020.z
ip
loading: 'cm-12-20150320-OFICIAL-5020.zip'
* failed to write data 'protocol fault (couldn't read status): Connection reset
by peer' *
Remove sd card and reinsert it while in cwm and in twrp you mount partitions do the equivalent for cwm for your SD card and make sure your SD card is not corrupted
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Resolved!! Yay!!
Finally, all fixed.
Let me explain what I did:
I was not able to see zip or sd card in recovery mode. So I pushed the zip file to data/media/0 and installed zip by browsing to that path.
I was not able to flash Cynogenmod, because during the process the reboot was in to my old logo, So I assume it was failure. Then I downloaded a stock rom of my phone model and pushed it to the same location and installed it.
Now, is working fine so far.
Thanks everyone!
[email protected] said:
Remove sd card and reinsert it while in cwm and in twrp you mount partitions do the equivalent for cwm for your SD card and make sure your SD card is not corrupted
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Click to expand...
Click to collapse
I have to remove battery to insert card, so I cannot do that while in recovery mode. However I was able to push the zip to system memory with adb (sdk tools). Cynogen mod didnt work for me, so I used a stock one again
I will still search for a new version as this one is JB 4.1
Well glad you got it fixed
Sent from my iPhone 4s using Tapatalk I also own a g900v