Content removed
Good work. Any chance you'll support other versions?
paulo boë said:
Good work. Any chance you'll support other versions?
Click to expand...
Click to collapse
yea as soon as i have all other variant files i will
my j5 is j5oof thats why i have all the files si its the first one
ankitv6 said:
yea as soon as i have all other variant files i will
my j5 is j5oof thats why i have all the files si its the first one
Click to expand...
Click to collapse
Awesome:good::laugh:
This can be run on j500h lollipop version ?
Keancarl said:
This can be run on j500h lollipop version ?
Click to expand...
Click to collapse
no man just MM
ankitv6 said:
no man just MM
Click to expand...
Click to collapse
Thanks bro no solution about this or i need to system update before i seen this message but system says its modified maybe I could flash again my stock rom and proceed to software update
Keancarl said:
Thanks bro no solution about this or i need to system update before i seen this message but system says its modified maybe I could flash again my stock rom and proceed to software update
Click to expand...
Click to collapse
you must have installed a custom recovery or have rooted your official rom that is why it doesn't download updates
you have to flash your stock rom through odin first then you can receive updates
if you are doing this just for installing stock MM then download latest firmware or MM firmware for your variant and flash it
enjoy MM
Greetings man Is this a built from source? If it is I can't see any link to the sources...
How to install .img file through recovery
.img file
sivakrishnanj said:
.img file
Click to expand...
Click to collapse
download this img go to twrp and in bottom right hand corner select install image and install image then flash wifi fix as a zip
do let me know how it works out
In cpu governs - no, impluse
In io - no, zen
Suggestions: please make as zip file, after flashing my recovery has gone in this img file
sivakrishnanj said:
In cpu governs - no, impluse
In io - no, zen
Suggestions: please make as zip file, after flashing my recovery has gone in this img file
Click to expand...
Click to collapse
There are two options: flash img in recovery partition and boot partition, I suppose you chose recovery instead of boot..
updesh94 said:
There are two options: flash img in recovery partition and boot partition, I suppose you chose recovery instead of boot..
Click to expand...
Click to collapse
Its my fault i should have mention it in instructions
Sry its my first post so had no idea
Btw i will be removing this thread as soon as i have access to my laptop
sivakrishnanj said:
In cpu governs - no, impluse
In io - no, zen
Suggestions: please make as zip file, after flashing my recovery has gone in this img file
Click to expand...
Click to collapse
Yea you are right i probably should have
Bulgaricus said:
Greetings man Is this a built from source? If it is I can't see any link to the sources...
Click to expand...
Click to collapse
its stock kernel without any changes :laugh:
SpamMachine said:
its stock kernel without any changes :laugh:
Click to expand...
Click to collapse
Yeah cuz having adreno idler is pure stock feature lmao
SpamMachine said:
its stock kernel without any changes :laugh:
Click to expand...
Click to collapse
I never said its not a stock kernel man i just said that you cannot use your wifi with it which i tried and fixed on mine and wanted to share thats it
ankitv6 said:
I never said its not a stock kernel man i just said that you cannot use your wifi with it which i tried and fixed on mine and wanted to share thats it
Click to expand...
Click to collapse
I have no idea what are you talking about:laugh:
Related
hey guys here is a custom bootimg for the L5 II (e450).
What has Changed?
ro.secure set to 0
added init.d support
What is to come?
Underclock CPU
Overclock CPU
a few people may have noticed that by unlocking the bootloader you can still get a security error is you changed a system file that LG doesnt want you playing with, in other words if you try port Lewa or MIUI you still get a security error. that is because there are a few additional things that need to be changed on the bootimg. I thought changing ro.secure to 0 would fix this but it didnt.
Download
E450
E460
Happy Flashing
Thanks for this, great job as always
Beershake said:
Thanks for this, great job as always
Click to expand...
Click to collapse
working on e460?
jamase787 said:
working on e460?
Click to expand...
Click to collapse
Oh yeah
Beershake said:
Oh yeah
Click to expand...
Click to collapse
good to see that you guys are doing your best to get some custom roms on this device . so you can confirm this works on e460??
porozex said:
good to see that you guys are doing your best to get some custom roms on this device . so you can confirm this works on e460??
Click to expand...
Click to collapse
I am Guessing its a Yes. I dont see much difference between the two devices. but I would suggest making a back up first. when building this I flashed faulty bootimg 's and it didnt brick my device I was able to boot into recovery and flash back stock.
slipsystem said:
I am Guessing its a Yes. I dont see much difference between the two devices. but I would suggest making a back up first. when building this I flashed faulty bootimg 's and it didnt brick my device I was able to boot into recovery and flash back stock.
Click to expand...
Click to collapse
so i succesfully flashed it on e460 and it works but the led buttons dosent light up and i didnt find the initd folder in system/etc. so i think there are some differences between these devices and this kernel cannot be compatible. can you build one with the e460 source?
porozex said:
so i succesfully flashed it on e460 and it works but the led buttons dosent light up and i didnt find the initd folder in system/etc. so i think there are some differences between these devices and this kernel cannot be compatible. can you build one with the e460 source?
Click to expand...
Click to collapse
It was a problem with my updater script. I forgot to create the init.d folder. I will upload it not.
you can send me your stock bootimg if you want and i will add the same features.
slipsystem said:
It was a problem with my updater script. I forgot to create the init.d folder. I will upload it not.
you can send me your stock bootimg if you want and i will add the same features.
Click to expand...
Click to collapse
http://www.mediafire.com/download/ufaxd12d32arq68/boot.img thanks
Updated Bootimg
fixed init.d not creating folder and calling on wrong sh
porozex said:
http://www.mediafire.com/download/ufaxd12d32arq68/boot.img thanks
Click to expand...
Click to collapse
Give me 10 min Just got to download it quick
slipsystem said:
Give me 10 min Just got to download it quick
Click to expand...
Click to collapse
ok. i will test it and report back
porozex said:
http://www.mediafire.com/download/ufaxd12d32arq68/boot.img thanks
Click to expand...
Click to collapse
try this
https://mega.co.nz/#!f4gTXCqS!81EL0YNJ4883OeZj8ZJSgwaCkvSb5yRTqIrITD4_nPw
slipsystem said:
try this
https://mega.co.nz/#!f4gTXCqS!81EL0YNJ4883OeZj8ZJSgwaCkvSb5yRTqIrITD4_nPw
Click to expand...
Click to collapse
now works perfectly thanks . i also check the data/local/tmp to see if there is a log about init.d
everything is ok
i also will appreciate if you check this app: http://forum.xda-developers.com/showthread.php?t=2401988
im interested about the modules dynamic fsync etc.
im using this app and i can contol alot of things like zram and lowmemorykiller
Hi all,
Made this flashable zip with a DRM fix that seems to work on our X f5121. It's the kernel from the latest 34.2.A.0.273 firmware but the fix should also work on 34.2.A.0.266 firmware
The DRM fix is essentially a copy of the DRM fix used in the Genesis kernel for the XC made by @ggow so all credits go out to him and his work!
Flash with TWRP or Flashfire
Download links in following post, thanks to @lubik1 :
lubik1 said:
Xperia X и Xperia X Dual Stock kernel FW_292 Nougat with:DRM-fix, RIC-off, DM-verity off, Encryptable, Debuggable, UnsecureHow To Install:
Flash via FlashTool in Fastboot mode or run ADB and us fastboot flash boot <boot.img name> command
Many Thanks to tobias.waldvogel for his tool
Single Sim F5121 FW 292 kernelDual Sim F5122 FW 292 kernel
Click to expand...
Click to collapse
To add root flash SuperSU
for 311 firmware:
F5121:
kistigun said:
for f5121
https://1drv.ms/u/s!AlGc5S9rgkBTtnwOy4fWi0mM6jUs
Click to expand...
Click to collapse
F5122:
algnerd said:
So I just made a 311 boot.img for F5122
DM-Verify Disabled;
DRM-Fix: Yes;
RIC: not disabled;
Recovery: None;
BusyBox: None;
You can download it from here
Click to expand...
Click to collapse
Wow ! Awesome man, i'm downlaoding right now and i'll test it later. Thanks !
Awesome man!!!! For those (like me) that lost these keys, this is very welcomed!
Any idea if it would work on dual F5122?
Think I'll flash 273 just in case.
Cheers and tks again!
bauboni said:
Awesome man!!!! For those (like me) that lost these keys, this is very welcomed!
Any idea if it would work on dual F5122?
Think I'll flash 273 just in case.
Cheers and tks again!
Click to expand...
Click to collapse
Not sure it will work for the f5122, Thank it has a different kernel. But test it, if it doesnt work send me the stock boot.img and i'll make it work
Yo @kistigun, f5121 here, the kernel does not work. The phone just stay stuck on the sony logo.
moutonnoireu said:
Yo @kistigun, f5121 here, the kernel does not work. The phone just stay stuck on the sony logo.
Click to expand...
Click to collapse
oke, thanks for testing. Can you try the following for me:
Unpack boot.img from zip
Connect in bootloader mode
Flash boot.img in fastboot command(fastboot flash boot boot.img)
reboot
kistigun said:
oke, thanks for testing. Can you try the following for me:
Unpack boot.img from zip
Connect in bootloader mode
Flash boot.img in fastboot command(fastboot flash boot boot.img)
reboot
Click to expand...
Click to collapse
That's what i already did before as i have no ther way to flash a kernel (not rooted).
moutonnoireu said:
That's what i already did before as i have no ther way to flash a kernel (not rooted).
Click to expand...
Click to collapse
ah, well you need to flash the zip with twrp or flashfire. Only flashing the boot.img wont work.
here is the stock boot.img to get you back on your feet: https://1drv.ms/u/s!AlGc5S9rgkBTtVDaJWb6bzvnG_Yw
moutonnoireu said:
That's what i already did before as i have no ther way to flash a kernel (not rooted).
Click to expand...
Click to collapse
kistigun said:
ah, well you need to flash the zip with twrp or flashfire. Only flashing the boot.img wont work.
here is the stock boot.img to get you back on your feet: https://1drv.ms/u/s!AlGc5S9rgkBTtVDaJWb6bzvnG_Yw
Click to expand...
Click to collapse
Is it working on f5121? I will send you F5122 boot.img when I get home from work. Would you be able to repack it with RIC & DM-V as well?
tanago said:
Is it working on f5121? I will send you F5122 boot.img when I get home from work. Would you be able to repack it with RIC & DM-V as well?
Click to expand...
Click to collapse
try this for f5122: https://1drv.ms/u/s!AlGc5S9rgkBTtVEpfrCVPH7UtcOA
kistigun said:
ah, well you need to flash the zip with twrp or flashfire. Only flashing the boot.img wont work.
here is the stock boot.img to get you back on your feet: https://1drv.ms/u/s!AlGc5S9rgkBTtVDaJWb6bzvnG_Yw
Click to expand...
Click to collapse
How can i use twrp or flashfire on my f5121 running the latest nougat ? They both need Root and i don't know how to root my phone under nougat
moutonnoireu said:
How can i use twrp or flashfire on my f5121 running the latest nougat ? They both need Root and i don't know how to root my phone under nougat
Click to expand...
Click to collapse
Download this recovery:http://www.infectedbuilds.net/downloads/suzu/omni_mm/twrp/
Connect device in bootloader mode
Flash recovery with command: fastboot flash recovery recovery.img
Turn on device while holding down volume Down untill twrp boots
kistigun said:
Download this recovery:http://www.infectedbuilds.net/downloads/suzu/omni_mm/twrp/
Connect device in bootloader mode
Flash recovery with command: fastboot flash recovery recovery.img
Turn on device while holding down volume Down untill twrp boots
Click to expand...
Click to collapse
Thank you ! TWRP is installed and i'm flashing the kernel right now
Cant install with TWRP, Error 255...?
kistigun said:
Hi all,
Made this flashable zip with a DRM fix that seems to work on our X f5121
Click to expand...
Click to collapse
Ha-ha, Good Job man!
I make this kernel week ago, but it wont boot up, my mistake was in link system/vendor/lib
https://forum.xda-developers.com/showpost.php?p=70306412&postcount=28
Now i have modded kernel and can confirm that DRM work fine, and if U want i can share with You My edited kernel with Ric-off, DRM-fix and SuperSu included.
So @kistigun, it did not work. My phone won't boot & act dead. Found a way to put it in flashmode and i'm restoring it to stock with Emma. @[email protected]
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
lubik1 said:
Ha-ha, Good Job man!
I make this kernel week ago, but it wont boot up, my mistake was in link system/vendor/lib
https://forum.xda-developers.com/showpost.php?p=70306412&postcount=28
Now i have modded kernel and can confirm that DRM work fine, and if U want i can share with You My edited kernel with Ric-off, DRM-fix and SuperSu included.
Click to expand...
Click to collapse
It would be awesome !
moutonnoireu said:
It would be awesome !
Click to expand...
Click to collapse
View attachment PoisonKernel-v2.0.zip for Single Sim
and for Dual Sim
View attachment 3989317
lubik1 said:
View attachment 3989312 for Single Sim
and for Dual Sim
View attachment 3989317
Click to expand...
Click to collapse
Thanks you my friend! Will putt these links in the OP!
kistigun said:
Thanks you my friend! Will putt these links in the OP!
Click to expand...
Click to collapse
Finally some dev action for Nougat. I almost regretted not buying X Performance because of their decent dev support.
Can't wait to get Xposed for N and then root, n, DRM fix.
Thank you!!
f5122, flashed recovery, immediately after that f5122 kernel -> device stuck on sony logo
Deleted
<Mod Edit>
Thread closed by OP request.
Deleted
Does it work on j510fn?
Can I flash LOS with this recovery?
ClassicMike said:
Can I flash LOS with this recovery?
Click to expand...
Click to collapse
Yes
?
If you have compiled this recovery from the source code, then it would also be possible to compile the Cm. In addition to operating the f2fs file system
Sent from my Samsung SM-G955F using XDA Labs
Demicro said:
?
If you have compiled this recovery from the source code, then it would also be possible to compile the Cm. In addition to operating the f2fs file system
Sent from my Samsung SM-G955F using XDA Labs
Click to expand...
Click to collapse
HI.
What's up?
What do you think about CM 11(Android 4.2.2) on our device?
Where I can get drivers and modules for it?
From A5 2015 it will compatible?
ClassicMike said:
Does it work on j510fn?
Click to expand...
Click to collapse
Yes ofc, read the OP
Demicro said:
?
If you have compiled this recovery from the source code, then it would also be possible to compile the Cm. In addition to operating the f2fs file system
Click to expand...
Click to collapse
F2FS recovery already under development
ClassicMike said:
Can I flash LOS with this recovery?
Click to expand...
Click to collapse
Yes. It has support for Standalone installers and Aroma installers I will fix the MTP soon enough.
Thanks! Working on j510FN Dual Sim.
ClassicMike said:
Thanks! Working on j510FN Dual Sim.
Click to expand...
Click to collapse
Just updating with fixed MTP
Good recovery, but is it available also with .tar, so I can flash it with odin?
Johnba98 said:
Good recovery, but is it available also with .tar, so I can flash it with odin?
Click to expand...
Click to collapse
Just download this file and archive it to a .tar file.You can do that with 7zip,i don't think you can do that with Winrar.
Gent' said:
Just download this file and archive it to a .tar file.You can do that with 7zip,i don't think you can do that with Winrar.
Click to expand...
Click to collapse
Winrar can only extract tar files : )
Thanks!
Works well on J510H
Gent' said:
Just download this file and archive it to a .tar file.You can do that with 7zip,i don't think you can do that with Winrar.
Click to expand...
Click to collapse
Ok thanks. I tried to do this in the past with winrar and dindn't quite work.
File from first post packed to a tar for direct flashing through odin. Tested and working fine.
Updated this recovery with red variant, Upgrade to TWRP 3.1.1-0, Removed cursor like before and Odin flashable now aswell . Enjoy
PS: I will update Orange Amoled to 3.1.1-0 soon aswell
ClassicMike said:
Does it work on j510fn?
Click to expand...
Click to collapse
work
I asked this question because of the downloads are more than 200 but I was not able to boot that Android P dp1.
I'm curious about this too. I tried flashing it via the latest Redwolf recovery but it came up with an Invalid zip error.
Me toó i can flash but i think this .zip is for proyect treable
dustmalik said:
I'm curious about this too. I tried flashing it via the latest Redwolf recovery but it came up with an Invalid zip error.
Click to expand...
Click to collapse
drmuruga said:
I asked this question because of the downloads are more than 200 but I was not able to boot that Android P dp1.
Click to expand...
Click to collapse
urus277 said:
Me toó i can flash but i think this .zip is for proyect treable
Click to expand...
Click to collapse
That's because it's a zip. Remember how in the beginning we needed to update twrp to flash oreo roms or it would give error 7. It's same here. And also treble roms are system.img file which we have to flash, and not any .zip file. Unless and until someone updates our twrp to support android p dev preview. It would be a hard time installating here.
Has anyone tried the new uploaded builds?
dustmalik said:
Has anyone tried the new uploaded builds?
Click to expand...
Click to collapse
Can you link them?
MyNameIsRage said:
Can you link them?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=673956719939829481
https://androidfilehost.com/?fid=673956719939829477
Read this:
https://forum.xda-developers.com//redmi-note-4/help/android-9-0-rom-t3766361/post75963703
Helo guys come again with me,
before say thanks to @Arteush share his ota-update of beta Q Note9.
I just wanna share the System Dump of the Galaxy Note9 (N960F) with Android 10 Beta1 free for dev to use this with credit of course.
this is include system, vendor, odm, and boot.
Have fun with Android Q.
link download
https://drive.google.com/file/d/1W8MFTk7Pdm0WnwquChwMf7mDAfS0VWX7/view
If we have twrp can we just flash this as a zip? Or will it not work
Drizzy xS said:
If we have twrp can we just flash this as a zip? Or will it not work
Click to expand...
Click to collapse
no its dump only.. but wait i work on flashable. just a moment
ridwan.sn said:
no its dump only.. but wait i work on flashable. just a moment
Click to expand...
Click to collapse
Okay waiting
ridwan.sn said:
no its dump only.. but wait i work on flashable. just a moment
Click to expand...
Click to collapse
Thank you!!!!!
Any possibility you could share an ODIN flashable firmware or an OTA file for those who dont have their phone rooted?
UltraEra said:
Any possibility you could share an ODIN flashable firmware or an OTA file for those who dont have their phone rooted?
Click to expand...
Click to collapse
I'd also like to use rooted Q. Seems that it is impossible at this stage. It bootloops after installing TWRP and Magisk 20.1
charackthe said:
I'd also like to use rooted Q. Seems that it is impossible at this stage. It bootloops after installing TWRP and Magisk 20.1
Click to expand...
Click to collapse
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
charackthe said:
I'd also like to use rooted Q. Seems that it is impossible at this stage. It bootloops after installing TWRP and Magisk 20.1
Click to expand...
Click to collapse
yeah need patch for magisk.
because now has new system_root
Arteush said:
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
Click to expand...
Click to collapse
thanks for info and ure ota. i fix them too with disable encrypt
now flashable is ready
ridwan.sn said:
thanks for info and ure ota. i fix them too with disable encrypt
now flashable is ready
Click to expand...
Click to collapse
Can't wait for you to share a flashable version
ridwan.sn said:
no its dump only.. but wait i work on flashable. just a moment
Click to expand...
Click to collapse
Do you have a flashable file ? thakyou
Arteush said:
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
Click to expand...
Click to collapse
Trying that out right now, will let you all know if I run into a bootloop. (It gave an ODM mounting error, don't know its significance but that's why I'm worried.)
Actually while I was writing this the phone turned on.
EDIT: After a reboot, the phone doesn't boot at all it sends me to the download mode.
ridwan.sn said:
yeah need patch for magisk.
because now has new system_root
Click to expand...
Click to collapse
ridwan.sn said:
thanks for info and ure ota. i fix them too with disable encrypt
now flashable is ready
Click to expand...
Click to collapse
:good:
Yep new system as root stuff! Which need some build changes to get a fully compatible twrp.
I will upload new one
Arteush said:
Thanks to @Zackptg5 you shoud take look at his Universal DM-Verity, ForceEncrypt, Disk Quota Disablers
It fixed the bootloop for me
Click to expand...
Click to collapse
For everyone's information, this works and you can use root nicely, however, most magisk modules will destroy the system and throw you out to the download mode and you will have to wipe the data to boot again. I presume this is because most of the modules I have tried aren't Android 10 compatible yet. If anybody is able to get V4A work or install current magisk modules and run them reach out to me because I'd like to hear how.
EDIT: I somehow got it working but now I see that the Bluetooth devices aren't kept after reboot not even with the proper module to keep them.
How do you install this / System dump android 10 n960fxxu4zsk5 // I'm on the recovery twrp
patensas said:
Can't wait for you to share a flashable version
Click to expand...
Click to collapse
not now. i need fix something in system.. its give me error.
costinghe said:
Do you have a flashable file ? thakyou
Click to expand...
Click to collapse
sorry not now brother..
Arteush said:
:good:
Yep new system as root stuff! Which need some build changes to get a fully compatible twrp.
I will upload new one
Click to expand...
Click to collapse
right now.. its need new twrp also patch too from magisk to get wor.
good luck mate we wait ure twrp.
alhgan2014 said:
How do you install this / System dump android 10 n960fxxu4zsk5 // I'm on the recovery twrp
Click to expand...
Click to collapse
this just for dump.. maybe u can extract to ure phone and flash single .image by twrp. not recomended but u can try :good:.
ridwan.sn said:
not now. i need fix something in system.. its give me error.
sorry not now brother..
right now.. its need new twrp also patch too from magisk to get wor.
good luck mate we wait ure twrp.
this just for dump.. maybe u can extract to ure phone and flash single .image by twrp. not recomended but u can try :good:.
Click to expand...
Click to collapse
Trwp with q support is here
charackthe said:
For everyone's information, this works and you can use root nicely, however, most magisk modules will destroy the system and throw you out to the download mode and you will have to wipe the data to boot again. I presume this is because most of the modules I have tried aren't Android 10 compatible yet. If anybody is able to get V4A work or install current magisk modules and run them reach out to me because I'd like to hear how.
EDIT: I somehow got it working but now I see that the Bluetooth devices aren't kept after reboot not even with the proper module to keep them.
Click to expand...
Click to collapse
Can you elaborate how you manage to get V4A to work? I'm desperate, lol.
Arteush said:
Trwp with q support is here
Click to expand...
Click to collapse
great work mate :good::highfive:
so my flashable is can flashed without issue now.
lets me to check now
AxelCocaine said:
Can you elaborate how you manage to get V4A to work? I'm desperate, lol.
Click to expand...
Click to collapse
it.
ah u need ask viper dev to add it sammy Q driver for support