Just installed the Skinnova OnePlus 5 skins. The textures on the skin look so realistic. You feel like holding a Wooden Oneplus 5.
It's a perfectly fitting skin that is literally covering every mm of my phone except the screen (Ordered a Orzly Tempered Glass for the screen).
They have two options of skins for the OnePlus 5 :
1) Full Back - That covers the back and entire side frame of the OP5.
2) Flat Back - That covers only the back of the OP5.
{Mod edit: Link removed!}
Went with the Full back - Ebony wood skin. My OnePlus 5 looks fabulous with these skins. I have attached some pictures for reference and shot some with the HDR mode to show the texture depth.
Hunkman said:
Just installed the Skinnova OnePlus 5 skins. The textures on the skin look so realistic. You feel like holding a Wooden Oneplus 5.
It's a perfectly fitting skin that is literally covering every mm of my phone except the screen (Ordered a Orzly Tempered Glass for the screen).
They have two options of skins for the OnePlus 5 :
1) Full Back - That covers the back and entire side frame of the OP5.
2) Flat Back - That covers only the back of the OP5.
{Mod edit: Link removed!}
Went with the Full back - Ebony wood skin. My OnePlus 5 looks fabulous with these skins. I have attached some pictures for reference and shot some with the HDR mode to show the texture depth.







Click to expand...
Click to collapse
That looks really great. You did great job installing that skin! Did install dbrand on my OnePlus 3 but it was pretty hard and not perfect. And I don't like imperfection on my phone so I take it off.
I have only OnePlus official carbon case on my OnePlus 5 now.
Looks nice! , I'll stick with my dbrand, any other skin company (bar dbrand and XtremeSkins) have been horrible after a few months. Generally some of the best quality too, they have been in the game for ages
nitramcek said:
That looks really great. You did great job installing that skin! Did install dbrand on my OnePlus 3 but it was pretty hard and not perfect. And I don't like imperfection on my phone so I take it off.
I have only OnePlus official carbon case on my OnePlus 5 now.
Click to expand...
Click to collapse
That's painful. But they would have sent you two sets. Have you used both the skins??
DarkExistence said:
Looks nice! , I'll stick with my dbrand, any other skin company (bar dbrand and XtremeSkins) have been horrible after a few months. Generally some of the best quality too, they have been in the game for ages
Click to expand...
Click to collapse
Yes, Dbrand is the best in the market. But I really love this texture that I couldn't find on the Dbrand. The skins still awesome on my OP5 and the texture feel, precision everything is fine for me. Even planning to get another set of skins after few months.:victory:
Hunkman said:
That's painful. But they would have sent you two sets. Have you used both the skins??
Click to expand...
Click to collapse
No, I didn't even tried to use other one. I just bought Kevlar OnePlus case and I was happy with that.
Hunkman said:
Yes, Dbrand is the best in the market. But I really love this texture that I couldn't find on the Dbrand. The skins still awesome on my OP5 and the texture feel, precision everything is fine for me. Even planning to get another set of skins after few months.:victory:
Click to expand...
Click to collapse
I am myself thinking of buying either this or bamboo skin from them. not at all able to pick between the two. how's the grip of the skin anyways? did you buy some other skin as well? any comparison between the skins you have owned?
I recommend using cases rather than skins.
Ashish.akc said:
I am myself thinking of buying either this or bamboo skin from them. not at all able to pick between the two. how's the grip of the skin anyways? did you buy some other skin as well? any comparison between the skins you have owned?
Click to expand...
Click to collapse
The grip is better than having it naked. I would prefer you to go with the zebra that gives you the Matte finish with some added grip imo. Or you can go with the Ebony itself.
Hunkman said:
The grip is better than having it naked. I would prefer you to go with the zebra that gives you the Matte finish with some added grip imo. Or you can go with the Ebony itself.
Click to expand...
Click to collapse
zebra doesn't appeal me much. ebony is what should I go with then. does Bamboo skin provide the same texture as ebony?
Ashish.akc said:
zebra doesn't appeal me much. ebony is what should I go with then. does Bamboo skin provide the same texture as ebony?
Click to expand...
Click to collapse
I have seen somewhere that the Bamboo skin also got the same textured feel. I hope all of their skins got the same texture effect on their skin. If you are getting the bamboo skin try posting the pictures of it.
Hunkman said:
I have seen somewhere that the Bamboo skin also got the same textured feel. I hope all of their skins got the same texture effect on their skin. If you are getting the bamboo skin try posting the pictures of it.
Click to expand...
Click to collapse
all right, I will. dBrand is also hosting a sale today, I might get a couple of skins from them today, or else gadgetshieldz are there...haha
Ashish.akc said:
all right, I will. dBrand is also hosting a sale today, I might get a couple of skins from them today, or else gadgetshieldz are there...haha
Click to expand...
Click to collapse
Waoow that's awesome but the problem is with their shipping time -_- And even if they are coming up with the offer, the price is now almost the same as the gadgetshieldz
Hunkman said:
Waoow that's awesome but the problem is with their shipping time -_- And even if they are coming up with the offer, the price is now almost the same as the gadgetshieldz
Click to expand...
Click to collapse
there dragon skin is what entices me. now the new black camo is also great. I 'MIGHT' get these with a wood skin combined. still, it would be heavy on pocket though
Ashish.akc said:
there dragon skin is what entices me. now the new black camo is also great. I 'MIGHT' get these with a wood skin combined. still, it would be heavy on pocket though
Click to expand...
Click to collapse
Even I love their Black and Red dragon skins. I wish that gadgetshieldz should bring up something like that.
Just now they released a video of their dragon skin in their social handles. I think it will be out in few days.
Hi, someone have bought new Dbrand Matrix skins? May i know if they add grip?
I love Dbrand dragon skin because of its major grip instead of nude phone but after many months i'm a little bored.
Before Dragon skin i have leater Skins, it's better than nude phone but in my opinion it's however too slippery
Just bought the Camo skin, just waiting for it !
furious.builder said:
Just bought the Camo skin, just waiting for it !
Click to expand...
Click to collapse
gadgetshieldz or dbrand ?
Dbrand
Related
Hello there!
I am looking for a leather case for my yet to be bought OnePlus 5. Not a flip case, but something like this Apple leather case.
Has anybody seen something like this for the OnePlus 5?
Thanks!
I am also looking for something like this. I loved my OnePlus 3T leather case, to bad that they discontinued it.
From noreve.com there will be such a case available in future.
Für example the OnePlus 3:
https://www.noreve.com/en/3/3386-oneplus-3-leather-cover.html
https://www.noreve.com/en/5/3556-oneplus-5-leather-cover.html
That looks promising! Thanks for sharing!
If you want leather, what I did was buy a small roll of real leather and then just sew it to fit the phone perfectly, like a sleeve. I just hand sewed it. You can put your thread color to contrast with the leather, or to match it. Then you can also cut a small hole for the notification slider or they things (like the notification light).
I've tried many cases, but none are quite as good as just a perfectly fitting leather sleeve.
Almost no added bulk. Plus it cleans your screen every time you take it in and out.
And you can just scrunch the leather back into your pocket when you are using the phone.
DropBOB.ca for my blog!
I ordered 2 @ Aliexpress. One from MOFi and one from KEZiHome. I hope they are not the greatest crap. I think they will be ok until something better is available :laugh:
@Walhalla, once you get them, please post back a few impressions.
Thanks!
Walhalla said:
I ordered 2 @ Aliexpress. One from MOFi and one from KEZiHome. I hope they are not the greatest crap. I think they will be ok until something better is available :laugh:
Click to expand...
Click to collapse
I have both, KEZiHOME is from genuine leather, MOFi is not. The first one looks more luxurious than the mofi one.
Sent from my ONEPLUS A5000 using Tapatalk
How tight do they fit? Is there a difference in fitting?
How long did shipping take?
bobby260 said:
If you want leather, what I did was buy a small roll of real leather and then just sew it to fit the phone perfectly, like a sleeve. I just hand sewed it. You can put your thread color to contrast with the leather, or to match it. Then you can also cut a small hole for the notification slider or they things (like the notification light).
I've tried many cases, but none are quite as good as just a perfectly fitting leather sleeve.
Almost no added bulk. Plus it cleans your screen every time you take it in and out.
And you can just scrunch the leather back into your pocket when you are using the phone.
DropBOB.ca for my blog!
Click to expand...
Click to collapse
I use this https://www.amazon.co.uk/fitBAG-tailored-integrated-microfibre-cleaning-Beat-Blue/dp/B01MRLV9KS/
Works fine for the OP5 as well. Really nice soft leather feel to it and as you mention, easy to just scrunch up in the pocket.
This looks similar but it won't be real leather:
https://www.gearbest.com/cases-leather/pp_688096.html
Walhalla said:
I ordered 2 @ Aliexpress. One from MOFi and one from KEZiHome. I hope they are not the greatest crap. I think they will be ok until something better is available :laugh:
Click to expand...
Click to collapse
Would love to see how it looks like!
Walhalla said:
I ordered 2 @ Aliexpress. One from MOFi and one from KEZiHome. I hope they are not the greatest crap. I think they will be ok until something better is available :laugh:
Click to expand...
Click to collapse
ejsoliveros said:
Would love to see how it looks like!
Click to expand...
Click to collapse
+1
Ashish.akc said:
+1
Click to expand...
Click to collapse
I ordered one btw! But from a different store. Will update once received on Feb 15-March 10. Ordered the Alcantara fabric case and calf leather case for OnePlus 5t and iPhone X.
Sorry guys I totally forgot to post the pictures I shot.
Here you go: Gallery
To be honest, I never used them, because I didn't liked them.
MOFi - The color is more gray than black and the texture is very smooth and somehow slippery. The in hand feel is definetly not leather. Opticaly the thick edges were not eye-pleasing.
KEZiHome - Nice textured feeling. I never had the feeling that the device would slip out of my hand, but I didn't liked the color in person. Another bummer was that it was very hard to use the alert slider and the volume buttons.
Too bad that OnePlus canceled the leather case after the OnePlus 3T. I f**** loved that case.
On Jul 3rd I pre-ordered two dBrand skins for my OP5 and they arrived on Jul 6th. The two skins were the Mahogany wood (back and camera lens cover) and the Hyperblack Titanium (back with red camera lens cover and red 1+ logo). Even though I wanted to add the front Mahogany skins the fact that I've also ordered the Ozly tpsp screen protector made me realized I'd have issues whenever I needed to replace the screen cover.
Attached are pictures of both skins with accessories un-applied and the Mahogany skins applied including the camera lens cover. Notice that the two Mahogany skins have different wood patterns. Running your finger over each skin I realized that the Mahogany adds almost no additional grip to the slippery naked OP5 while the Hyperblack Titanium skin has more texture which I believed would add more grip. This is not to say that once applied the Mahogany skin did not reduce the overall slipper feel of a naked OP5, as it did. In the future I'll likely try the Hyperblack Titanium but right now I really like the Mahogany's overall look the best.
I still bought a cheap clear plastic case which is currently on a slow boat from China. I'll use it when I'm going someplace where accidents are more likely such as camping or a party. These skins are so thin that I don't anticipate putting the case on to be an issue.
This is the first time I've every bought or applied a skin as I've previously only gone with bumper cases. Over all I think the application went well but I certainly don't have the corner flaps applied as well as seen on dBrand's OP5 application video. Most definitely you need a hairdryer during application as I had a bubble under the skin and heating that section and the bubble's path to the outside saved having to peal the skin off to start again. It works much like you push bubbles out from a clear plastic screen protector. Getting the initial bottom alignment applied properly is the key to the rest of the application. Mess that up and you alignment issues multiply. Heating and stretching the skin is dangerous and only helps with the tiniest of misalignment.
The dBrands fit overall and specifically around the buttons is as perfect as a mass produced item can be. In conclusion, if you choose to use a skin you'd be hard pressed to find a brand with a more accurate fit.
P.S. For grip the Carbon Fiber would likely be your best bet but I thought it was butt ugly so went another way.
Edit: Added top, bottom, right and left side pictures.
Hyperblack comes along with the white 1+ logo? Or is it just the packaging design?
I am thinking of buying Black Dragon.
Usually, when is the Dbrand Sale? Any idea?
Thanks
observingi said:
Hyperblack comes along with the white 1+ logo? Or is it just the packaging design?
I am thinking of buying Black Dragon.
Usually, when is the Dbrand Sale? Any idea?
Thanks
Click to expand...
Click to collapse
No, what appears on the Hyperblack picture as a white 1+ logo is just the skin's backing tape. The Hyperblack I picked has a cut out of the 1+ logo then I ordered the red colored logo cut out to fill in the skin's logo cut out. On the Mahogany skin I chose not to have any 1+ logo so the skin was solid (no logo cut out at all). The Black Dragon skin was already available when I purchased my skins. I was tempted to get that instead of the Hyperblack.
I have no idea when there will be a sale. I didn't feel the price was too excessive. In fact I would have only bought the Mahogany at this time but the added $5 for shipping meant that a second skin only cost me an extra $6 and the shipping on both skins became free. That's much like how Amazon prices small items to be just under the free shipping costs to get you to buy one more item. In this case I went for it as a Hyperblack skin also tempted me.
I just got the black dragon skin with orange logo and camera cutout. I previously used the titanium and the hyperblack on my Nexus 6p and I can say that the dragon skin has a very similar texture than the hyperblack. IN terms of looks, I have to say that it looks similar to the hyperblack except for the cracked look/texture and the slight silver highlights in certain areas. All in all, I think it looks amazing on this device.
Im looking to grab one of the Mah Wood one and having it under my Orzly flexi case. It looks pretty amazing with the wood skin. Would you be able to show off the sides of the phone? I would love to see the fit on the sides
dBrand sure do make some precision skins! Let us know once you installed them!
Here is mine! Just finished. Marble with cement logo
A Guy Called Revive said:
Im looking to grab one of the Mah Wood one and having it under my Orzly flexi case. It looks pretty amazing with the wood skin. Would you be able to show off the sides of the phone? I would love to see the fit on the sides
Click to expand...
Click to collapse
I added pictures of both side and top and bottom to the original post. Don't be too harsh of my corner imperfections, I was a rookie
hmph @3DSammy don't I know you from my tab s threads?
Yep, new device new forum visits
Not Dbrand, but Gadgetshieldz. This is a carbon Flat Back.
HueleSnaiL said:
I just got the black dragon skin with orange logo and camera cutout. I previously used the titanium and the hyperblack on my Nexus 6p and I can say that the dragon skin has a very similar texture than the hyperblack. IN terms of looks, I have to say that it looks similar to the hyperblack except for the cracked look/texture and the slight silver highlights in certain areas. All in all, I think it looks amazing on this device.
Click to expand...
Click to collapse
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
wedgess said:
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
Click to expand...
Click to collapse
From what dBrand have been saying, the dragon skins look to be quite grippy. I'd love to use skins over cases but don't trust myself enough
DarkExistence said:
From what dBrand have been saying, the dragon skins look to be quite grippy. I'd love to use skins over cases but don't trust myself enough
Click to expand...
Click to collapse
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
wedgess said:
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
Click to expand...
Click to collapse
Just be careful with that combo on a Rhino Shield. they can rip off Tempered glass and the cases lately have been so tight getting them on with even a skin on is really hard and taking it off is even worse. I damaged my OP3 trying to get the Rhino Shield off when using a skin. best results is to cut the skin so it doesn't go up and down the sides or corners of the phone.
I still remember ordering that case there was no warning on the prouduct page about it not working with tempered glass and when I complianed and got nowhere a sudden disclaimer went up :/
wedgess said:
Looking good!! I've ordered mine but with red logo cutout. Is there good grip with the black dragon skin? My only quirk with this device so far is how slippy the back is and was hoping the black dragon skin would sort that out for me..
Click to expand...
Click to collapse
It definitely has some texture that helps the phone be less slippery but not as much as I expected. But it certainly help add a decent amount of grip, especially on the sides of the phone which are very thin and rounded.
Roxas598 said:
Just be careful with that combo on a Rhino Shield. they can rip off Tempered glass and the cases lately have been so tight getting them on with even a skin on is really hard and taking it off is even worse. I damaged my OP3 trying to get the Rhino Shield off when using a skin. best results is to cut the skin so it doesn't go up and down the sides or corners of the phone.
I still remember ordering that case there was no warning on the prouduct page about it not working with tempered glass and when I complianed and got nowhere a sudden disclaimer went up :/
Click to expand...
Click to collapse
Ye my mate was saying the RhinoShield on his OP3t is way too tight and difficult to get off. I saw one on a S8 and looks a fair bit looser, hoping it's a bit looser on the OP5 and fits.
Thanks for the heads up though:good:
HueleSnaiL said:
It definitely has some texture that helps the phone be less slippery but not as much as I expected. But it certainly help add a decent amount of grip, especially on the sides of the phone which are very thin and rounded.
Click to expand...
Click to collapse
Thanks, so long as it adds some amount of grip I'll be happy. If not I might just end up getting a case:good:
wedgess said:
I don't trust myself either!! Thinking of getting one of the rhinoshield bumpers so I can keep it looking nice, on the back at least :victory: Hopefully that along with the tempered glass SP I have one will protect it.. and so long as the skin is grippy I hopefully shouldn't drop it.
Click to expand...
Click to collapse
never had a bumper but always heard rhinoshield were the best, saw some youtube videos of them being dropped from 10 ft and surviving haha
I went with the dragon back myself...
ThaFranchize15 said:
I went with the dragon back myself...
Click to expand...
Click to collapse
So it does actually look as good in real life as in the renders then eh? How does it feel?
I know DBrand are big state side but with the phone not being available for our American counterparts it'd doubtful they'll do a skin for the P20 Pro so I've order a brushed slate skin via xtreamskins. Cost me £6.50 which I didn't think was too bad. I can post picture and give an overview of how easy/difficult it is to fit and photo's of how it looks if there's much interest from folks on here? https://www.xtremeskins.co.uk/products/huawei-p20-pro-skins?variant=8065942650908
Deano1889 said:
I know DBrand are big state side but with the phone not being available for our American counterparts it'd doubtful they'll do a skin for the P20 Pro so I've order a brushed slate skin via xtreamskins. Cost me £6.50 which I didn't think was too bad. I can post picture and give an overview of how easy/difficult it is to fit and photo's of how it looks if there's much interest from folks on here? https://www.xtremeskins.co.uk/products/huawei-p20-pro-skins?variant=8065942650908
Click to expand...
Click to collapse
I was just looking at this today. Instead I ordered a few cases off eBay. They look like they better protect the cameras. https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/112914026578
I'd appreciate that
Got my skin from these guys today. It's not that great of a product but works for the price. Application is pretty straight forward but a pain getting it to align with the cameras and flash. The good part is that you can peal and reapply and it doesn't affect the stickiness of the skin. The edges don't stick down at the rounded corners so you definitely need a case over this or it will peal off
Ereckson said:
Got my skin from these guys today. It's not that great of a product but works for the price. Application is pretty straight forward but a pain getting it to align with the cameras and flash. The good part is that you can peal and reapply and it doesn't affect the stickiness of the skin. The edges don't stick down at the rounded corners so you definitely need a case over this or it will peal off
Click to expand...
Click to collapse
Looks kinda cool with the case, but then again I got the blue colour so don't think I want to cover that up anyway.
DaveP2611 said:
Looks kinda cool with the case, but then again I got the blue colour so don't think I want to cover that up anyway.
Click to expand...
Click to collapse
The only issue I have with this is the edges not sticking down. Let me know your thoughts on the blue skin.
Heat it on with a hairdryer dude
Ereckson said:
The only issue I have with this is the edges not sticking down. Let me know your thoughts on the blue skin.
Click to expand...
Click to collapse
Ah sorry I meant I picked up the Midnight Blue P20 so wouldn't put a skin over it anyway.
Damn, was hoping to get a skin so i can use it without a case and keep the back scratch free
The edges not sticking down is unfortunately a deal breaker there
Check out https://www.xtremeskins.co.uk
I'm currently running their carbon Fibre skin on my S8+ and it sticks great. Even around the edges. No issues whatsoever and good scratch protection. Can only recommend them. Just ordered a black camo one for my P20 pro.
Heat it
Neo_Sk8eR said:
Damn, was hoping to get a skin so i can use it without a case and keep the back scratch free
The edges not sticking down is unfortunately a deal breaker there
Click to expand...
Click to collapse
You need to heat skins on if the edges are curved.....get your mums hairdryer on it
I had same ssue with mine. Emailed Xtream Skins who offered to send out a replacement (I've gone for camo this time as slate doesn't look as good as on photo render).
They sad that they've changed the design and after looking back at their website you can see that the the skins now wrap around the sides of the phone.
Regards the sides not sticking. I put the case on over the skin and over night the skin stuck completely due to pressure from case. Beats the hairdryer technique that didn't work for me.
Thewarroom said:
You need to heat skins on if the edges are curved.....get your mums hairdryer on it
Click to expand...
Click to collapse
I'm a grown ass man.....
I'll get the Mrs hairdryer
Got a skin from them, fits and sticks perfectly. Definitely reccomended. Black camo looks great...
Neo_Sk8eR said:
I'm a grown ass man.....
I'll get the Mrs hairdryer
Click to expand...
Click to collapse
Any photo that I can take a look and decide to buy one? I interested in the black camo
I have got this one from 7layerskinz.com. Fits very nice.
Got my black camo skin from Xtreme in the UK. Came within 2 days. The video instructions are really straight forward, I got the back glass one only.
Would take a pic, don't have a spare phone at the minute to do so! Was cheap too. £6.99
Fitting was easy, the key is to activate the glue by using some gentle heat and pressure. No lifts on any corners or sides. No bubbles as it's got air release channels in the back, but you gotta push the air out before you seal the sides! Made that mistake on my iPhone seven last year.
It's definitely less slippy now with a skin on.
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
ajamils said:
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
Click to expand...
Click to collapse
Check out the SlickWraps man, they offer naked wrap with gloss and matte options, I am planning on getting the twilight color next month as well!! Quick question for yall, anyone has screen latency issue on this device? seems to be a common issue.
ajamils said:
Are there any clear skins available state side? I got the Twilight color so would prefer not to hide it but still need some protection.
Click to expand...
Click to collapse
Do remember that the application for clear skins will be problematic if it is not a wet install. With skin installation, generally you would have to handle the adhesive with your fingers and that means imparting fingerprints on it. With non-clear skins that isn't an issue as you will not be able to see the smudges. With clear skins you will and the only way to prevent this is to perform a wet install.
https://dbrand.com/shop/huawei-p20-pro-skins
Apparantly Dbrand has p20 pro skins. Anyone tried one yet? They look SICK. May have to get one myself.
I tried one of them on my Nexus 6p. After more than one year wearing it, it never separate even slightly from the back of my phone. Very good quality skins!
dbrand rocks. the quality is superb. had it on every phone till now.
Always used dbrand for skins. They are great quality.
I tend to use a case on phones with a camera bump though as a skin doesn't offer protection and it still wobbles on a table.
Sent from my CLT-L09 using Tapatalk
slayer214 said:
https://dbrand.com/shop/huawei-p20-pro-skins
Apparantly Dbrand has p20 pro skins. Anyone tried one yet? They look SICK. May have to get one myself.
Click to expand...
Click to collapse
Yes here is my dbrand camo skin on my black P20 pro
ramheer said:
Yes here is my dbrand camo skin on my black P20 pro
Click to expand...
Click to collapse
Does is wrap up the sides also? so you would not see the plasticky looking metal on the side...
ramheer said:
Yes here is my dbrand camo skin on my black P20 pro
Click to expand...
Click to collapse
I've got one on the way. Love your reviews on Youtube btw!
danvsima said:
Does is wrap up the sides also? so you would not see the plasticky looking metal on the side...
Click to expand...
Click to collapse
No it doesn't
danvsima said:
Does is wrap up the sides also? so you would not see the plasticky looking metal on the side...
Click to expand...
Click to collapse
If you are in UK XtreamSkins also do camo. I have the full wrap around black camo and am very impressed. It wraps around the sides and top and bottom with cut outs of IR blaster, buttons etc...
I went to their page, and the skins looks sweet
just applied the camo back skin. finally the phone is not slippery anymore.
Do they offer any extra grip? Do they have any rubberized versions?
Hi all
Dropped my phone earlier and the rear glass smashed - obscuring the lovely shimmery purple!
I want to cover it up to stop it breaking any more and to cover the chunk of glass it took out.
Any suggestions as to what might work best? Should I try and fill the hole with something before putting a skin on it?
Any suggestions much appreciated!
Just get a dbrand. I did that same thing with my old Nexus 4 and it looked great considering the mess I had made.
henrypootel said:
Hi all
Dropped my phone earlier and the rear glass smashed - obscuring the lovely shimmery purple!
I want to cover it up to stop it breaking any more and to cover the chunk of glass it took out.
Any suggestions as to what might work best? Should I try and fill the hole with something before putting a skin on it?
Any suggestions much appreciated!
Click to expand...
Click to collapse
Skins are the right solution for that. Skins doesn't feel bulky when applied and feels solid in hand. Just apply a skin from GadgetShieldz which covers the glass crack and give a stylish look to your phone. And Even GadgetShieldz is now providing some special edition skins, In which one special edition skin looks like the McLaren edition.
https://www.gadgetshieldz.com/oneplus-6t-skins-covers-wraps.html
Here are some images of my 6T with special edition skin called Bumblebee
VenkatNishanth said:
Skins are the right solution for that. Skins doesn't feel bulky when applied and feels solid in hand. Just apply a skin from GadgetShieldz which covers the glass crack and give a stylish look to your phone. And Even GadgetShieldz is now providing some special edition skins, In which one special edition skin looks like the McLaren edition.
https://www.gadgetshieldz.com/oneplus-6t-skins-covers-wraps.html
Here are some images of my 6T with special edition skin called Bumblebee
Click to expand...
Click to collapse
Oh that looks really nice! Thanks!
https://www.cellspare.com/oneplus-6t-rear-housing-battery-door-module-purple?search=Oneplus 6t
I am wait for mine to come