Hi. I am rather new to this, so please keep this in mind when I tell you what I have done.
I have a Huawei Y6 Elite. I unlocked the boot loader successfully and then tried to flash TWRP via fastboot. Somehow in this process I have flashed it to the boot partition. Now it boots to TWRP - ONLY. I can enter the recovery mode in the phone but that doesn't offer much.
The phone is NOT rooted.
Please, can someone offer me some kind of solution...??
Is it possible to flash the original firmware via TWRP and start again? If so, can someone PLEASE point me to a link to download it.
The firmware version I need is Huawei Y6 Elite LYO-L02 C718B123.
Any help would be appreciated incredibly. Thank you.
Follow this link.. Hope.. you will find your stock rom..
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
---------- Post added at 04:48 PM ---------- Previous post was at 04:39 PM ----------
And if you find the stock rom...
Then
extract the zip file which contains the rom. you'll find a folder name dload
send this dload folder to your sdcard's root directory
put the sdcard in your phone
now power on your device by pressing Vol+, Vol- and Power button at the same time.
it will start installing the official rom
Note: It will only work with Stock Recovery.
If you don have stock recovery then
Download Huawei Update Extractor
Extract the Recovery from downloaded UPDATE.APP in dload folder
put the recovery in your fastboot folder
flash the Stock recovery using fastboot
Thanks for responding.
I did follow the link and use the firmware finder, however I can't work out how to download any firmware versions.
Also I did not have any luck with the update extractor.
Is there a slightly more simplified way you can explain it. I can't seem to get my head around it.
Again, thanks for any and all help. It is greatly appreciated.
heljoy said:
Thanks for responding.
I did follow the link and use the firmware finder, however I can't work out how to download any firmware versions.
Also I did not have any luck with the update extractor.
Is there a slightly more simplified way you can explain it. I can't seem to get my head around it.
Again, thanks for any and all help. It is greatly appreciated.
Click to expand...
Click to collapse
i only found this ota on firmwarefinder
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1228/g223/v88791/f1/full/update.zip
Edit: found full firmware this is for lyo-l02 b124
https://easy-firmware.com/index.php?a=browse&b=file&id=83095\
extract the zip and extract the update.app with huawei update extracter and then flash via fastboot
Is there a trick to downloading from easy firmware or do i have to subscribe.?
heljoy said:
Is there a trick to downloading from easy firmware or do i have to subscribe.?
Click to expand...
Click to collapse
I will check
---------- Post added at 09:30 AM ---------- Previous post was at 09:29 AM ----------
Amaan007 said:
I will check
Click to expand...
Click to collapse
Edit I think u have to
Here is a new Zealand firmware try it
http://gsm-firmware.com/index.php?a=browse&b=file-info&id=18199
Damn it... every time I get close something seems to stand in the way..
Will the hicloud option still work?
What do I need to do with it?
heljoy said:
Damn it... every time I get close something seems to stand in the way..
Will the hicloud option still work?
What do I need to do with it?
Click to expand...
Click to collapse
Hicloud is an ota not the full firmware
Did it work
Hey sorry for such a delayed response.
No it did not work.
Hi helijoy,
This might be quite late, but I can help you if you can give me your /system image. If you're certain you have TWRP on your boot partition, I can give you stock boot. To extract /system, go into TWRP>Mount, select System, make sure you have adb set up (google it if not) and do these commands (from adb):
adb shell
su
dd if=/dev/block/mmcblk0p22 of=/sdcard/system.img
exit
adb pull /sdcard/system.img C:/
(replace C: with where ever you want to save it to).
Then upload the file (system.img) to something like mega or google drive and post the link here.
Huawei y6 elite (LYO-L02) rooting problem
Hi all, I have a huawei y6 elite LYO_L02C718B123
Im new to all this so not quiet sure im doing it right. I followed the steps in the article (https://forum.xda-developers.com/android/general/root-root-huawei-y6-elite-australia-t3548204),And everything went well but when i use the root checker i get a
STAGE 3 - Root User Account : Error
Error: stderr: null, stdout: null,exit_value: 1.
So hope someone can help me cause im so lost.
Moonlighter
TWRP Huawei
Hey there,
So I have just got the phone charging and am about to start trying what you suggested.
What do I need to select here..?
Thanks, Andrew.
https://forum.xda-developers.com/picture.php?albumid=14604&pictureid=56629
heljoy said:
Hey there,
So I have just got the phone charging and am about to start trying what you suggested.
What do I need to select here..?
Thanks, Andrew.
https://forum.xda-developers.com/picture.php?albumid=14604&pictureid=56629
Click to expand...
Click to collapse
Hi helijoy,
system is already selected so you do not have to do anything else. Just follow the rest of the instructions from your computer with your phone plugged in and booted to TWRP.
Thanks~
---------- Post added at 04:49 PM ---------- Previous post was at 04:41 PM ----------
m00nlight3r said:
Hi all, I have a huawei y6 elite LYO_L02C718B123
Im new to all this so not quiet sure im doing it right. I followed the steps in the article (https://forum.xda-developers.com/android/general/root-root-huawei-y6-elite-australia-t3548204),And everything went well but when i use the root checker i get a
STAGE 3 - Root User Account : Error
Error: stderr: null, stdout: null,exit_value: 1.
So hope someone can help me cause im so lost.
Moonlighter
Click to expand...
Click to collapse
Hi moonlighter,
Can you please link to which root checker app you used? Did you remember to open SuperSU first and upgrade binaries? If not, please do so. After that's done, clear data of the root checker and try again. Also, if possible, try another root checking app.
Awaiting your response,
CyanicSword
Cyanic Sword said:
Hi helijoy,
system is already selected so you do not have to do anything else. Just follow the rest of the instructions from your computer with your phone plugged in and booted to TWRP.
Thanks~
---------- Post added at 04:49 PM ---------- Previous post was at 04:41 PM ----------
Hi moonlighter,
Can you please link to which root checker app you used? Did you remember to open SuperSU first and upgrade binaries? If not, please do so. After that's done, clear data of the root checker and try again. Also, if possible, try another root checking app.
Awaiting your response,
CyanicSword
Click to expand...
Click to collapse
Thank you for getting back to me so qquick i used root checker basic and 4 other root checkers but i didnt think of flushing the data out. ill try that
m00nlight3r said:
Thank you for getting back to me so qquick i used root checker basic and 4 other root checkers but i didnt think of flushing the data out. ill try that
Click to expand...
Click to collapse
Hi moonlights,
As I already have said, ensure your SU binaries are up to date by opening SuperSU. And, if it's not too much to ask for, can you please go to TWRP, backup system and upload it somewhere? I was messing around with system and now I'm kind of stuck. It would be greatly appreciated if you could do this, as I have an an unusable phone.
Thanks again,
CyanicSword
Cyanic Sword said:
Hi helijoy,
This might be quite late, but I can help you if you can give me your /system image. If you're certain you have TWRP on your boot partition, I can give you stock boot. To extract /system, go into TWRP>Mount, select System, make sure you have adb set up (google it if not) and do these commands (from adb):
adb shell
su
dd if=/dev/block/mmcblk0p22 of=/sdcard/system.img
exit
adb pull /sdcard/system.img C:/
(replace C: with where ever you want to save it to).
Then upload the file (system.img) to something like mega or google drive and post the link here.
Click to expand...
Click to collapse
Ok... I think I must be doing something wrong.
I am sure I have ADB setup correctly though.
How exactly do you "do those commands" from ADB?
Sorry for the dense questions.
Cheers.
heljoy said:
Ok... I think I must be doing something wrong.
I am sure I have ADB setup correctly though.
How exactly do you "do those commands" from ADB?
Sorry for the dense questions.
Cheers.
Click to expand...
Click to collapse
Hi helijoy,
You said you have already used fastboot to flash TWRP. Now all you need to do is boot into TWRP, plug it in to your computer and run the commands I gave you exactly like how you ran fastboot flash recovery ......
heljoy said:
Ok... I think I must be doing something wrong.
I am sure I have ADB setup correctly though.
How exactly do you "do those commands" from ADB?
Sorry for the dense questions.
Cheers.
Click to expand...
Click to collapse
Hi again helijoy,
Another thing you can do is go to TWRP>Backup and backup everything (if you don't have any space left, just do recovery, boot and system; does are the important ones). Take this backup, upload it to something like MEGA or Google Drive and post the link here. To get this backup, do the steps in TWRP, and then connect it to your computer. Open explorer, go to the phone in This PC, ang check both Internal Storage and MicroSD Card. It will be in the TWRP>Backups folder, and the folders name will have a date and time.just upload this entire folder and post the link here.
Thanks,
CyanicSword
Related
http://phandroid.com/2012/08/13/t-mobile-springboard-getting-android-4-0-4-this-wednesday/
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
How about mediapad?
Is it has a ics 4.0.4 too?
ZEII said:
How about mediapad?
Is it has a ics 4.0.4 too?
Click to expand...
Click to collapse
Huawei had released ICS for media pad a while ago. Check the development section.
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
but only 4.0.3, not 4.0.4
441Excelsior said:
but only 4.0.3, not 4.0.4
Click to expand...
Click to collapse
True.
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
From tmonews, it's 4.0.3 and not 4.0.4. I think 4.0.3 is the correct one. Anyway, we will know it soon enough.
Would somebody be so kind and try to keep the update.zip for those of us who have problems getting back to stock?
ICS is now released and my Springboard is downloading the update!
Here is the ZIP file update for anyone that want to grab it to extract and play...
http://www.gamefront.com/files/22180781/Springboard-ics-update.zip
Update:
OTA failed for me right away. I got the update to manually install with the following steps:
1) Created a folder on root of my SDcard, dload
2) Copied the update ZIP file above into dload and renamed it to update.zip
3) Created a zero length file unlmt.cfg in the dload folder
Rebooted with normal VOL+ key held down to start a SD install.
Note: After upgrade completed the Launcher would not start and kept repeating "Unfortunately Launcher has stopped".
To fix, click Ok and quickly bring up the Statusbar menu by swiping it at the bottom of the screen and click on the clock/date, next enter Settings->Apps->All->Launcher, then clear data.
Looks like a full update So everyone who flashed the Springboard to MediaPad could go back now, if wanted.
Best feature in this update for me is, the startup T-mobile sound is about 1/4 the old volume!
:fingers-crossed:
Does this T-mobile ICS seem to support the phone function?
vicfuze said:
ICS is now released and my Springboard is downloading the update!
.......
Click to expand...
Click to collapse
Thanks for the info and link vicfuze!
Update worked great, and I got it rooted without problems.
Have been eagerly awaiting this.
vicfuze said:
Here is the ZIP file update for anyone that want to grab it to extract and play...
Click to expand...
Click to collapse
Much appreciated but it would have been even nicer if you could have posted the original URL from Google
I'm downloading it now. I think I might try to flash just the radio files and see if that improves things for me. I'm otherwise satisfied with the international ICS firmware.
---------- Post added at 10:36 PM ---------- Previous post was at 10:35 PM ----------
vicfuze said:
Best feature in this update for me is, the startup T-mobile sound is about 1/4 the old volume!
:fingers-crossed:
Click to expand...
Click to collapse
You can remove that sound with root. I think it's:
/cust/tmobile/us/media/animationsounds/bootSound.ogg
Rename or delete it.
---------- Post added at 10:51 PM ---------- Previous post was at 10:36 PM ----------
Question: What's the baseband version post-update?
Hi,
does anybody know, if I can run this update on the German Version of the Mediapad or shall I better refrain from trying?
Thank you
Made some Mirrors...
Mirror 1
Mirror 2
Happy Flashing !
springboard root
Does the springboard have to be rooted before the update to get root? I used the update but it is not rooted now nor was it before and I would like to get root.
whgarner said:
Does the springboard have to be rooted before the update to get root? I used the update but it is not rooted now nor was it before and I would like to get root.
Click to expand...
Click to collapse
Nope the update is a full wipe. So you will need to root after the update.
http://www.modaco.com/topic/354579-...-mediapad-t-mobile-springboard-orange-tahiti/
nightanole said:
Nope the update is a full wipe. So you will need to root after the update.
http://www.modaco.com/topic/354579-...-mediapad-t-mobile-springboard-orange-tahiti/
Click to expand...
Click to collapse
Here is a mirror of the SU installer pkg from that post for US folks.
http://www.gamefront.com/files/22185176/Huawei+MediaPad+ROOT+ICS+Android+4.0.x.rar
vicfuze said:
Here is a mirror of the SU installer pkg from that post for US folks.
http://www.gamefront.com/files/22185176/Huawei+MediaPad+ROOT+ICS+Android+4.0.x.rar
Click to expand...
Click to collapse
Have you actually got this root method to work for the non-Mediapad Springboard with the T-Mobile firmware? I run Linux and so the command script in this package will not exactly execute on my machine. I tried manually sequentially entering the adb commands contained in the command script, and got stuck at a 'permission denied' error within the first several commands. If this does work for the Springboard, and not just the Mediapad, then there might be something about the embedded windows drivers and software for the device that allows it to work...because I sure can't get it to fly on Ubuntu.
xdajunkman said:
Have you actually got this root method to work for the non-Mediapad Springboard with the T-Mobile firmware? I run Linux and so the command script in this package will not exactly execute on my machine. I tried manually sequentially entering the adb commands contained in the command script, and got stuck at a 'permission denied' error within the first several commands. If this does work for the Springboard, and not just the Mediapad, then there might be something about the embedded windows drivers and software for the device that allows it to work...because I sure can't get it to fly on Ubuntu.
Click to expand...
Click to collapse
I actually used the below method to install root again on ICS. I believe there is a fastboot for Linux if you cannot find a DOS/Windows machine.
Only issue I was my Springboard was recovery booting off of "recovery2" partition so I needed to flashboot that partition to get CWM recovery to boot. Since the Official Springboard ICS zip package contains the stock recovery.img file you really can flash both recovery/recovery2 partitions and revert back later if needed.
http://forum.xda-developers.com/showthread.php?t=1850367
And to clarify, for booting into Fastboot, you hold the power button and the VOL closest to it down at the same time.
To boot recovery/CWM hold the power button and VOL key furthur away from the power button (its VOL Up) for some reason.
Also, don't try to use the Touch recovery (TWM) package, it froze up on me when trying to run the root zip installer, but luckily reverting to the basic CWM recovery, I was able to re-install and fix my boot looping.
The title says it all. My M8 has the bootloader unlocked, it's S-off and rooted with Teamwin recovery installed. I started dicking around with it, and messed it up. I went to HBOOT and factory reset. I now have no OS, so obviously, my phone won't start up. I appear to be really stuck. If you guys help me and talk me through this, I'll stop dicking around. :-/
Also, I would like to load my stock bootloader, 1.12.502.18 (CID CWS__001). I've found the kernel source code as well as a 1.3 GB file from here http://forum.xda-developers.com/showthread.php?t=2701376 that supposedly houses this Nandroid backup, but I have no idea how to use it. God, I feel stupid.
Ok. I got the Nandroid backup recovery.emmc.win file pushed to the phone. Now, I have a red triangle in the middle of the screen and I can't get to recovery or fastboot.
Flash twrpCopy the rom to where your adb and fastboot are located connect phone via twrp run this command
adb push nameofrom.zip /sdcard/. exactly as shown here change nameofrom.zip to the name of the rom your trying to flash...this will put a rom on your internal storage and it then can be flashed via twrp
Wonders_Never_Cease said:
Flash twrpCopy the rom to where your adb and fastboot are located connect phone via twrp run this command
adb push nameofrom.zip /sdcard/. exactly as shown here change nameofrom.zip to the name of the rom your trying to flash...this will put a rom on your internal storage and it then can be flashed via twrp
Click to expand...
Click to collapse
I was able to get into TWRP just fine. When I pushed the file, it moved the file, but I can no longer get to TWRP. So the ROM is there, I just can't access it. Thoughts?
Ok, I got Recovery going. I'm now in TWRP. Where did adb stick the file I pushed?
take out sdcard if using one and only use internal storage..Have to push a flashable rom zip not nand backup.once is pushed it should take awhile,youll go to install like any other custom rom from the install menu. Or if you cant get that going use adb sideload command
Make sure command is correct
adb push nameofrom.zip /sdcard/.
Dumb question. Where in the world do I find the stock recovery zip? I can't find any zip...only img, etc.
You dont need stock recovery right now follow instructions to get a rom back on the device first...download any custom rom and follow what i said
---------- Post added at 12:56 AM ---------- Previous post was at 12:54 AM ----------
Guy in my rom thread had basically same issue hes back up and running by following what ive told you
Wonders_Never_Cease said:
You dont need stock recovery right now follow instructions to get a rom back on the device first...download any custom rom and follow what i said
---------- Post added at 12:56 AM ---------- Previous post was at 12:54 AM ----------
Guy in my rom thread had basically same issue hes back up and running by following what ive told you
Click to expand...
Click to collapse
Thanks for the help. Downloading your ROM now.
If you can get in recovery choose the option "adb sideload" put the ROM on your desktop and name it rom. Then in a command window type adb sideload rom.zip , TWRP will automatically recognize the update script and flash it for you.
Sent from my HTC One_M8 using Tapatalk
I took the direction of Wonders_Never_Cease and followed it to the letter. FUBAR no longer. Though I did panic a little, I learned a lot from this direction going forward. Thanks, Wonders_Never_Cease. Thanks also to everyone else who offered help.
Glad it all worked out for you...
ImNraged said:
I took the direction of Wonders_Never_Cease and followed it to the letter. FUBAR no longer. Though I did panic a little, I learned a lot from this direction going forward. Thanks, Wonders_Never_Cease. Thanks also to everyone else who offered help.
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Glad it all worked out for you...
Click to expand...
Click to collapse
Not so much. I've run into another problem while trying to get it back to where I want it. SD Card will not mount. What can I do?
Aaaaand, nevermind. Youtube was my friend in this case.
Wonders_Never_Cease said:
You dont need stock recovery right now follow instructions to get a rom back on the device first...download any custom rom and follow what i said
---------- Post added at 12:56 AM ---------- Previous post was at 12:54 AM ----------
Guy in my rom thread had basically same issue hes back up and running by following what ive told you
Click to expand...
Click to collapse
I don't think he was asking that. I am pretty sure he was asking where he managed to find the stock recovery, which is why the red exclamation, probably because he didn't pull or nand the recovery as a raw or img file before flashing something custom (the user that asked, that is).
I doubt is is a stock AT&T ship recovery from an RUU dump or ota, since there haven't been any for AT&T that I know of yet, so it's likely just a raw dump or was part of the nand backup he restored.
Already been sorted thank you fot you insight
GSLEON3 said:
I don't think he was asking that. I am pretty sure he was asking where he managed to find the stock recovery, which is why the red exclamation, probably because he didn't pull or nand the recovery as a raw or img file before flashing something custom (the user that asked, that is).
I doubt is is a stock AT&T ship recovery from an RUU dump or ota, since there haven't been any for AT&T that I know of yet, so it's likely just a raw dump or was part of the nand backup he restored.
Click to expand...
Click to collapse
I want to keep this thread short.
So lets get to work.
Everything here is about Huawei y-625xx phones.
Don't try this on any other phone or u gonna get ur phone bricked.
I will not be responsible if anything happens to ur phone.
This things works perfectly as it was tested by many user's.
I don't have this phone,my cousin does and I did it for him.
So it should work for u too.
ROOT
Get the latest kingroot app from here
Turn on data
click root
wait until it reboots ur phone and shows its rooted.
U can easily root using '360 root app' now!
And its completely safe
See reply #50 for details
RECOVERY
here's a video tutorial from The Best about installing T.W.R.P on y-625.
Here's the steps that r shown in this video.
Written by xda member @AkaruiTenshi
First of all, you will need to install abd and fastboot drivers if you're on a windows pc, if you use linux, just install abd and fastboot packages and dependencies for your distro.Connect the phone in the computer using an usb cable, and activate the debug in the phoneNext step, on windows open the command line...
In linux, just open the terminalNow call the abd, just type this (whitout quotes):
"abd -start-server"
Wait a little bit, in your phone will apear a mensage to validare the abd acess to the phone, just say yes...Again in the terminal or command line,
type:"abd reboot bootloader"(do not wait until the phone reboot).
type
"fastboot boot recovery.img".
After this, the twrp will boot in your phone, without installation (if you install the twrp, your warranty is void),
you can use twrp for backup your stock rom for exemple...
If you want to install the twrp, just change the last comand to:
"fastboot flash recovery recovery.img"
Method two---
Simply grab flashify or mobile uncle tool app and flash the recovery.img with those.
These 2 app needs root access.
ROMS
Sorry guys.
No luck for rom yet.
But my friend is trying to port Carbon kk on this device.
If he finishes it,I will post here...
Here's stock rom--
http://forum.xda-developers.com/general/xda-assist/stock-rom-huawei-y625-u43-t3288104
Regards,BatDroid
reserved
no huawei user's??!! :-/
now that's really disheartening
I need stock recovery.img for y625-u51 Please help!
BabaPena said:
I need stock recovery.img for y625-u51 Please help!
Click to expand...
Click to collapse
Here's stock rom.
Get it from here.
http://forum.xda-developers.com/general/xda-assist/stock-rom-huawei-y625-u43-t3288104
bump
Thank you for making this tread! I am very excited to hear that someone is trying to port a ROM for our device! :fingers-crossed:
matevt said:
Thank you for making this tread! I am very excited to hear that someone is trying to port a ROM for our device! :fingers-crossed:
Click to expand...
Click to collapse
Actually my friend stopped for his exam.
And there isn't any reply from user's.
Glad to see someone replied to this thread.
BatDroid said:
Actually my friend stopped for his exam.
And there isn't any reply from user's.
Glad to see someone replied to this thread.
Click to expand...
Click to collapse
Yep. Our device ins't very popular hence the low user activity here :\ but I've seen people asking for ROMs/EMUI updates.
Hope your friend continues development! Fingers crossed!
Btw I have a y625-U51 firmware. I'm not exactly sure what is with the "Uxx" versions.
https://drive.google.com/file/d/0B4mU_jy0onxoV0E0RlBmSFhYeEk/view?usp=sharing
matevt said:
Btw I have a y625-U51 firmware. I'm not exactly sure what is with the "Uxx" versions.
https://drive.google.com/file/d/0B4mU_jy0onxoV0E0RlBmSFhYeEk/view?usp=sharing
Click to expand...
Click to collapse
xx means supported for all.
BatDroid said:
xx means supported for all.
Click to expand...
Click to collapse
Oh I meant it like "U+number" like U21, U32, U48, U51
Can i install version u51 to y625-u21?
nighthawk84 said:
Can i install version u51 to y625-u21?
Click to expand...
Click to collapse
I have asked Huawei support for a simmilar question here's the reply:
"...Given that your device is manufactured for Bulgaria, you may refer to http://consumer.huawei.com/bg/support/index.htm to select your country region of support to be assisted accordingly.
Kindly be inform that Huawei strongly do not suggest the customers to download upgrade from a different region as it will affect the device performance and void the warranty. "
Anyone know how to get into fastboot without pc?
Thank You for creating this thread.Is there any way to port Lollipop Roms to this device?
---------- Post added at 06:13 PM ---------- Previous post was at 06:12 PM ----------
boxter7 said:
Anyone know how to get into fastboot without pc?
Click to expand...
Click to collapse
Remove battery, place it back in and press all physical buttons till phone shows boot logo.
I try this but phone frozen after show logo...
boxter7 said:
I try this but phone frozen after show logo...
Click to expand...
Click to collapse
That's because it is on fastboot?
Tadael said:
That's because it is on fastboot?
Click to expand...
Click to collapse
Hey tadael, I try but always says that devices not connect. But when I try form recovery adb sideload work.
Below you will find instructions how to root this device.
The following procedure has been tested up to firmware MMB29K.J320AUSC2AQA1
KNOX should remain 0x0
However you undertake this at your own risk.
(NOTE: This procedure will also work for the SM-J320AZ (Cricket))
Issues:
Wifi passwords not remembered (fix below)
Stock Flashlight app not working.
Model number may be missing from build.prop (fix below)
Instructions
1.Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
(See below for how to recover)
ENG_BOOT_J320A_PG1
2. Flash the boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the ENG_BOOT_J320A_PG1.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
3. Install and run Kingroot:
http://www.apkmirror.com/apk/kingro...-release/kingroot-5-0-5-android-apk-download/
You may need to run Kingroot several times to gain successful root.
4. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
Alternative (free) method to replace Kingroot:
Follow Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Don't flash the boot partition with Flashfire, uncheck.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware. Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
5. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
6. Model number fix:
http://www.techgainer.com/change-fake-android-device-model-number-and-brand-name/
7. To fix “Unauthorized actions have been detected”
disable 'Security log agent'
Enjoy your rooted device.
Recovering from a soft brick:
Flash the stock firmware provided below wirh ODIN in the AP slot.
https://www.androidfilehost.com/?fid=745425885120713788
J3 forum link: https://forum.xda-developers.com/t/galaxy-j3-2016
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Thanks bud. Your post in the other thread convinced me to purchase this device... so far so good
To everyone else, I had to use the patched version of supersu me to remove kingroot
Bugs in the system
So i reflashed the stock rom, everything was great. when i reflashed the file you gave us, debugging has failed to work as well as the flashlight. other than that no issues so far
bobbyp1086 said:
So i reflashed the stock rom, everything was great. when i reflashed the file you gave us, debugging has failed to work as well as the flashlight. other than that no issues so far
Click to expand...
Click to collapse
What do you mean debugging does not work? Adb is enabled by default, it's an engineering boot image.
ashyx said:
What do you mean debugging does not work? Adb is enabled by default, it's an engineering boot image.
Click to expand...
Click to collapse
instead of it asking if i want the computer to read i get this
bobbyp1086 said:
instead of it asking if i want the computer to read i get this
Click to expand...
Click to collapse
What response do you get for
adb devices
In adb?
Think the dous firmware has issues on our devices.
I'll upload j320aucu2apj2 shortly
DamienMc said:
Think the dous firmware has issues on our devices.
I'll upload j320aucu2apj2 shortly
Click to expand...
Click to collapse
How is an older firmware going to be better when most people will already be running AQA1 firmware?
ashyx said:
What response do you get for
adb devices
In adb?
Click to expand...
Click to collapse
The generic. But then i set the directory to sdk/platformtools and it worked.
But flashlight gone. Keyboard,google services and cell gone. Cant uninstall kingroot with every method out there and my phone is glitching
---------- Post added at 10:04 PM ---------- Previous post was at 10:02 PM ----------
DamienMc said:
Think the dous firmware has issues on our devices.
I'll upload j320aucu2apj2 shortly
Click to expand...
Click to collapse
Mine is stock duos, i love the stock rom, but my conputer died this morning,no hopes of odin
bobbyp1086 said:
The generic. But then i set the directory to sdk/platformtools and it worked.
But flashlight gone. Keyboard,google services and cell gone. Cant uninstall kingroot with every method out there and my phone is glitching
---------- Post added at 10:04 PM ---------- Previous post was at 10:02 PM ----------
Mine is stock duos, i love the stock rom, but my conputer died this morning,no hopes of odin
Click to expand...
Click to collapse
King root can be replaced with supersu me or the script. It can also be easily uninstalled via its settings.
What did you actually install?
My system went haywire. I need a command thru terminal on android to factory reset, can't boot into recovery.
bobbyp1086 said:
My system went haywire. I need a command thru terminal on android to factory reset, can't boot into recovery.
Click to expand...
Click to collapse
Just hold POWER + HOME + VOL DOWN until the device reboots then immediately change to POWER + HOME + VOL UP to get in to recovery mode or in Terminal type
su
reboot recovery
.
Thats a no go, can't boot up. kingroot seems to have killed my phone i just get "unfortunatley System UI has Stopped" when i power up. I will reflash withwork comp and update in a few hours...
bobbyp1086 said:
Thats a no go, can't boot up. kingroot seems to have killed my phone i just get "unfortunatley System UI has Stopped" when i power up. I will reflash withwork comp and update in a few hours...
Click to expand...
Click to collapse
You can't possibly have lost the recovery, nothing has touched it. It does take a short while for stock recovery to boot.
ashyx said:
Just hold POWER + HOME + VOL DOWN until the device reboots then immediately change to POWER + HOME + VOL UP to get in to recovery mode or in Terminal type
su
reboot recovery
.
Click to expand...
Click to collapse
ashyx said:
You can't possibly have lost the recovery, nothing has touched it. It does take a short while for stock recovery to boot.
Click to expand...
Click to collapse
Iam lost as to how it happened as well lol but its ok, just a tester phone for fun 3rd time i have done something wrong :laugh:
---------- Post added at 04:33 PM ---------- Previous post was at 04:12 PM ----------
Reflashed Stock Firmware, regained access to recovery, factory reset and back up and running. i actually noticed some new features in recovery. i can actually apply update from sd now, whereas before i could not access files on sd, looks like dm-verity is also gone, or at least not showing up in recovery as before (maybe because it was a failed test) also the start up of the phone has skipped the initial set up (no add account or set up password) and the main screen is way more crisp and clear than what i had on before, even with the other 3 reflashes i have previously done. so far so good though
DamienMc said:
Thanks bud. Your post in the other thread convinced me to purchase this device... so far so good
To everyone else, I had to use the patched version of supersu me to remove kingroot
Click to expand...
Click to collapse
How did the patch work? mine keeps opening saying licence validated and closing....going to try script version
bobbyp1086 said:
How did the patch work? mine keeps opening saying licence validated and closing....going to try script version
Click to expand...
Click to collapse
The model number missing is a known issue. You just need to edit the build.prop and put it back.
See this link for more info: http://www.techgainer.com/change-fake-android-device-model-number-and-brand-name/
bobbyp1086 said:
How did the patch work? mine keeps opening saying licence validated and closing....going to try script version
Click to expand...
Click to collapse
Used an old version, 9.7.4P
And I only got the script to work once :/
DamienMc said:
Used an old version, 9.7.4P
And I only got the script to work once :/
Click to expand...
Click to collapse
ok so the script is working but there is a different way
1. install kingroot 4.5 from apk mirror
2. Run script
3. update Su
4. update Binary
(i had to reinstall kingroot and deny kingroot root permission before binary would update and uninstall and keep root)
it seems denying kingroot root permission keeps the root on the device, letting su take over for root permission and uninstall of kingroot.
i know it seems weird but it works, the hang up was updating su, which you can do from google play
---------- Post added at 05:14 PM ---------- Previous post was at 04:56 PM ----------
Anyone have a stock "Build.prop" for this model
bobbyp1086 said:
Anyone have a stock "Build.prop" for this model
Click to expand...
Click to collapse
I'll upload it later.
Just whant to share dd backup I did who are test and working for at least BND-L21.
dd rip of official OTA 8.0.0.330.
If someone have need.
Cust.img : https://mega.nz/#!q9tn2C6T!JMMSDYN5qc4BQrmKwtjifGqg26Je8SjiToPBM7wktp4
Kernel.img : https://mega.nz/#!Kg8AADgJ!PmBFU4vM1nTvcJnT-AttXBvV7IIh93xdEPgSY9kE0BE
Product.img : https://mega.nz/#!zk8glLyJ!HIKFQoEMuShRYYvm3SWeIfmpLa3LrOI_ahpJ2PDFQXc
Ramdisk.img : https://mega.nz/#!WokUmYZJ!zusLmvamHNUfEVkzn-oEg3rescsnuPG29iRUlQM3E8M
Vendor.img : https://mega.nz/#!H5VnUJxZ!rSI4rg2Hy-cNn9-I1-dMt2y0MHq45ypu2MqL_OP7SZY
Version.img : https://mega.nz/#!q0d2ASiK!20PPaQcjevG_3Hzu1qeBS3ye6FnfG9pL6htA6vy5E8c
System.img : https://mega.nz/#!ShVTHRYJ!-Ha-K9UgKahc7KkRRSRHPkpuLSC4Yr0sZ_kCzEumRs0
If you don't use BND-L21 then use this files at your own risk.
it would have been nice
if files were on some other filehost.
plz share oeminfo too
kdark said:
plz share oeminfo too
Click to expand...
Click to collapse
Wiil try and do
U think it will work on L24?
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Had to put them in a separate post if I didn't wanna go through the trouble of moving the screenshots to my PC and uploading them there
Thanks man, it's great..:good::good::good::good::good:
XandeR180 said:
A bit of context here - my device model is BND-L34 (Mate SE) and I had tried using a method that a user posted in a Mate SE specific thread that detailed how to manually update to Oreo.
Well, that failed miserably and I ended up with a bricked device. I had tried numerous different things to try and revive it (some that I had come up with on my own) and none of them worked. Then I thought to use Multi-Tool to unbrick it with a backup I had lying around but unfortunately it was a Nougat backup.
I had almost lost hope until stumbling upon this thread. I figured I had nothing else to lose so I decided to try to restore my phone with Multi-Tool and your backup files - all except for the system image because MEGA decided to **** block me due to it being a large file (you should definitely upload them elsewhere, by the way), so what I did was use a stock system image someone uploaded in the OpenKirin RROS thread along with the rest of your backup files.
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
SO all in all, even if you didn't intend for L34 users to use these files, I want to thank you!
System image I used (see post #2)
[url]https://forum.xda-developers.com/honor-7x/development/rom-t3765201[/URL]
(Screenshots below in a separate post)
Click to expand...
Click to collapse
plz share your ramdisk img file i tried to find it but didn't get it
XandeR180 said:
I had also gotten a stock ramdisk_recovery.img file from somewhere else (forgot where but if anyone has trouble finding a stock recovery for Oreo I can upload mine). And VOILA (hope I spelled that right)! My device is back to life on Oreo and I couldn't be more happy.
Click to expand...
Click to collapse
I would be very interested in the stock ramdisk_recovery, could you send me the link?
Is that L21 version Indian variant?
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Sonny1732 said:
can i please get some help with unbricking my l24 variant. i have twrp installed but it says frp is locked. twrp says i have no os
Click to expand...
Click to collapse
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
mrmazak said:
If twrp works, there is a patch file that you can use to unlock frp.
MOD EDIT: LINK REMOVED
Would be helpful to understand what caused this problem though.
Click to expand...
Click to collapse
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Sonny1732 said:
ive had installed twrp and magisk the night before and had the app call lspeed downloaded, the next morning i deleted the lspeed app and restarted the device and got stuck on a bootloop so i factory reseted and now i just get the first honor screen then it reboots to the hauwei erecovery
Click to expand...
Click to collapse
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
mrmazak said:
Ok. Some reason twrp does not good a good job with factory resets.
I suggest flash that frp unlock.zip
Then flash stock ramdisk.img and stock kernel.img.
That will remove magisk, for now anyway.
Then try to boot. If still not, then flash stock recovery and do factory reset. But if reset again locks frp. You will be stuck.
If you dont mind resetting from fresh system maybe just reflash with hurupdater or hwota, instead of flashing stock recovery.
Click to expand...
Click to collapse
i dont mind at all resetting from fresh system how do i do that
Sonny1732 said:
i dont mind at all resetting from fresh system how do i do that
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
Sonny1732 said:
thank you, ill give it a try
Click to expand...
Click to collapse
i cant download the frp unlock.zip
Sonny1732 said:
thank you, ill give it a try
---------- Post added at 09:03 AM ---------- Previous post was at 08:50 AM ----------
i cant download the frp unlock.zip
Click to expand...
Click to collapse
Ok hold on
Should be this
https://mega.nz/#!nw0wAYoA!hYtf78s0AjwRCpPo_NQ2F4LYclngNBNurJNETypSNKQ
From @KingOfMezi
mrmazak said:
Ok hold on
Click to expand...
Click to collapse
i did the HuRUpdater_0.3.zip and now i can get to the just a sec screen after i select wifi during setup but now its stuck there