Related
After ROM upload my HTC Hero show only some logo like device out of box. Nothing else is going. Button combinations for bootloader access is not working. Any ideas?
I managed to skilfully brick mine too, is a there a way to get it to boot up via key combination or using USB from a computer?
We are three now.
I know (presumably) my error: I flashed an SPL zip package that could be of the wrong type (Dream).
The boot shows the phone logo (mine says G2 T-Mobile).
The home keydown at boot doesn't work.
Is there a possibility to unbrick it?
Hope someone tells you how to unbrick it as I was about to do the update the ROM, not sure I want to do it now.
Right this is very weird as i had the same picture on my phone and thought it was bricked too..
BUT i just did a soft reset call menu end together. Then i did a hard reset as i wasnt sure if the soft one had done anything. Battery out then in and start up phone whilst holding down house and back key and then it started to boot up. So not sure if this helps anyone i doubt it as its very random but i thought id share just in case!!!
I had just flashed my radio when mine did this..
friend of mine had tha problem too, he had to send his device to htc.. 50 bucks ;-)
hmmm ... i am one of u guys now ...
no matter what key-combo i press, it just show a BOX and an arrow and a phone ... 3 sec later, phone turns off, no matter hwat key u press, it is not doing anything until u unplug the batery ... then when u turn it on, it repeat the same thing again
check if you can access fastboot via back+power when the phone is off. if so install recovery image and then install correct rom. if not i guess you're screwed, not sure though.
This guy
http://forum.xda-developers.com/showthread.php?t=556038
seemed to have the same issue and resolved it.
Hope it helps/good luck!
sonatbey said:
i bricked very bad no screen no logo not booting. anyway any helps
Click to expand...
Click to collapse
Please be more explicit as to what exactly you did.
(for someone to help you)
Urgent help .. my phone is dead !
here is what happened exactly :
- i was running twitter normally as i used to do .. suddenly " Stopped working " error appeared
- tried to open twitter again or facebook app .. it keep says stopped working all the time
- i restarted the phone .. it stuck on the kernel screen .. tried to restart again , it stuck on the kernel screen again
tried to open in recovery mod .. once i opened the recovery mode it says :
Cant amount xxx.log
cant amount xxx.log
i don't remember exactly what the name
- tried to restore old recovery backup .. it keep says cant amount
- tried again to restore the backup .. this time the phone turned off forever !
now i cant even turn it on again
tried with 3 batteries but no way .. i cant turn it on again
tried to charge it .. but the charger light didn't appear
i am using RR JB 3.1.2 and dorimanx kernel v7.8
help please
MamomaN said:
Urgent help .. my phone is dead !
here is what happened exactly :
- i was running twitter normally as i used to do .. suddenly " Stopped working " error appeared
- tried to open twitter again or facebook app .. it keep says stopped working all the time
- i restarted the phone .. it stuck on the kernel screen .. tried to restart again , it stuck on the kernel screen again
tried to open in recovery mod .. once i opened the recovery mode it says :
Cant amount xxx.log
cant amount xxx.log
i don't remember exactly what the name
- tried to restore old recovery backup .. it keep says cant amount
- tried again to restore the backup .. this time the phone turned off forever !
now i cant even turn it on again
tried with 3 batteries but no way .. i cant turn it on again
tried to charge it .. but the charger light didn't appear
i am using RR JB 3.1.2 and dorimanx kernel v7.8
help please
Click to expand...
Click to collapse
Do you cant enter downloading mode?
If not. You phone get hard bricked.
Sent from my WT19i using Tapatalk 2
i cant even turn it on at any mode
no download mode .. no recovery mode !
it seems like i didn't press the power key
MamomaN said:
i cant even turn it on at any mode
no download mode .. no recovery mode !
it seems like i didn't press the power key
Click to expand...
Click to collapse
It's not a hard brick -_- if your phone shows any kind of activity, be it even battery charging animation when it's off.
Try to get a USB Jig, that'll take you to download mode and then flash anything via Odin.
if it is a Hard brick JTAG could be helpful. Also try to contact AdamOutler http://forum.xda-developers.com/showthread.php?t=1236273 He is develpoing a SDCard Recovery for hardbrick devices.
He need a device for it, and if he get it in time it will help you.
No .. my phone didn't show any kind of activity
no light .. no charging animation .. nothing at all
http://www.xda-developers.com/android/explaining-and-advancing-the-unbrickable-mod/
Hard Brick-The device is unresponsive and will not enumerate USB, a hardware based solution is the only method which will recover this type of brick
Soft Brick -The device shows something on the screen or possibly nothing at all, firmware download is possible because this is a “Download Mode”.
UnBrickable-The device has been modified to accept a debug-mode flash which cannot be altered.
Lucky Brick- The device ends up in UnBrickable debug mode and the Ultimate UnBrickable Resurrector can be used without a hardware modification to resurrect the device.
Click to expand...
Click to collapse
pull out the battery and waith 5 minutes. afther try to go on download mode.
Inviato dal mio GT-N7000 con Tapatalk 2
tried to remove the battery for 7 hours .. no way !
so , i should go to the repairing shop ?
no way ?
Seems like something got fried inside
Sent from my GT-I9100 using Tapatalk 2
^ oK , good
any help ?
What kind of help are you expecting ? Tho it's obviously not what you want to hear, it doesn't sound like it's a firmware issue that might mean it's (relatively) easily fixable.
If its under warranty, send it in to Samsung/authorised repairer & hope they don't care or don't notice you've been running non-stock firmware on the phone. You never know, they might fix it under warranty. If they won't, then you can look at having it JTAG'd or repaired locally by a 3rd party repairer given that will probably be cheaper than having Samsung/authorised repairer fix it if they do decide to charge you.
Anything anyone here tells you to try is just delaying having your phone fixed/depriving you of your phone for as long as you delay having it fixed.
i mean i need to make sure there still a hope !
based on a previews experience .. anyone saw this problem before ?
also it's the first time to know about the Hard brick
based on what i said , is my phone having a hard brick ?
so , it will be a software problem or something like that ?
Try this ^^ CLICKY
can't hurt by sounds of things :good: :fingers-crossed:
The repairing shop told me that the mother board burned !
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Nobody with info or help/link/having the same issue ?
Attempt to calibrate the proximity sensor and light sensor ... maybe help...
Hello !
I tried to access the proximity sensor test from the "CIT(?)" by pressing multiple time on "Kernel version "(about phone->kernel) but nothing opened (it's telling me "Launching cit" but nothing happened) ... the menu opened on the phone of my brother tho.
( en.miui.com/thread-110628-1-1.html instruction from here)
Uhmi said:
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Click to expand...
Click to collapse
Why there's no lockscreen when you wake up? Does the screen light up when shows black(try to verify in dark room)?
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
nasko_spasko said:
Why there's no lockscreen when you wake up?
Click to expand...
Click to collapse
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
nasko_spasko said:
Does the screen light up when shows black(try to verify in dark room)?
Click to expand...
Click to collapse
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
nasko_spasko said:
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
Click to expand...
Click to collapse
Yeah it appear as fast as any other redmi note 2 (i just tried now)
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
Click to expand...
Click to collapse
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Uhmi said:
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
Yeah it appear as fast as any other redmi note 2 (i just tried now)
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Click to expand...
Click to collapse
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
nasko_spasko said:
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
Click to expand...
Click to collapse
I followed these instruction from the seller (more than 2 weeks ago) :
Hi friend,
Please would you have a try to flash firmware to check?
Xiaomi_Redmi_Note_2_MIUI_7_PC_Lang_1009.zip
699.0 MB
mega.nz/#!yM9CnDqK!ntcKry0LliM_vfNFZmy3rXt3spbkT1Ueg8_eAyagdS4
Steps:
1. download the phone driver from this link:
androidxda.com/download-xiaomi-usb-drivers
2.install the driver to your PC.
3.turn off your phone,press volume down and power button at the same time until you enter fastboot mode.
4.double click "Redmi_Note_2_Flash_click_me.cmd" to run the flashing tool.
5.connect your phone to PC,the flashing will be processing automatic.
6.after flashing success,reboot your phone.
=====================
Redmi Note 2 Flashing Guide Video.mp4 280.6 MB
mega.nz/#!aJ1BxT7Z!cSE7FDvFk0snSni0R-TR7oQfh06KRyC0nwPOFe9E-Zc
Jenny
Click to expand...
Click to collapse
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Uhmi said:
I followed these instruction from the seller (more than 2 weeks ago) :
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Click to expand...
Click to collapse
this is fastboot method, not SP Flash Tool Download method.
I'll try to explain fast.
Download latest version of SP flash tool > Google search It
Install mediatek VCOM drivers to your Windows PC, if on Linux there's no need of driver. See this tutorial. For the redmi note 2 on step 4 you have to do it without the battery. The whole flash procedure is performed with removed battery.
After a successful driver installation proceed with loading the firmware in SP Flash Tool. Download the latest global stable rom, fastboot format -arround 1GB. Extract the folder that contains The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Disconnect your device and remove It's battery.
In SPFT Browse for mt6795androidscatter and all the partition should load automatically in the listbox bellow. On combo box download mode choose Firmware upgrade and hit the big Download button.
Now connect your device with battery removed. and all should go smooth.
I did It on Linux, because I don't really use Windows.
Feel free to ask further questions, will answer asap.
Choosing to do this is dangerous but this is the only method that flashes preloader and dsp and uboot parts. Take your own responsibility on this!
Bye!
nasko_spasko said:
The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Click to expand...
Click to collapse
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Uhmi said:
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Click to expand...
Click to collapse
Well, in this case It's either from the LCD or the PCB of the device not sure how to verify right now.. Do You have another one, i mean device or at least spare LCD screen?
Best option here is to return for service.
I have Touchscreen issue on my hermes and I won't send it back because I don't want to wait another 2 months, I'll fix it on my own. The screen costs me ~28USD, so I'll go with It.
What I fear is that in Your case might be a faulty PCB. That means even if you replace the LCD the problem may remain.
Yeah I don't know...
Juste noticed the flash/light don't work either...
mmmh.
Here. Link for 7.0.8.0 global ROM for SPFT, just in case.
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
darko150 said:
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
Click to expand...
Click to collapse
Sorry! Link updated.
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Use test point mathod it will be back in life easily. Tested myself
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
can you boot to fastboot if yes then flash via fast boot or search for FASTBOOT TO EDL MODE IN guide news section and flash via EDL that might help
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Buy a deepflash cable for 5$ in Aliexpress.
Deep flash https://www.youtube.com/watch?v=uXai6PMmM7s
How to make deep flash cable https://www.youtube.com/watch?v=hmdrj4uX7gY
ebrehemx said:
Dear Redmi Note 3 experts,
I have totally hard bricked my Redmi Note 3 trying to unlock unofficially. No hardware damage, only hard brick.
I was wondering if it is possible to bring it back to life by changing it's motherboard.
Is there a recommended place online to buy a mother board or a service center I can ship this to replace the mother board?
Does this even make any sense? or is it even possible?
Appreciate any guidance
Click to expand...
Click to collapse
If you're unable to boot to fastboot and edl or the pc shows 9008E, get the deep flash cable from Alixpress. It's cheap and easiest way to recover your phone. This cable works fine.
https://www.aliexpress.com/item/New...rts-all-BL-locks-Engineering/32785943419.html
Or you can make the cable yourself with some Youtube tutorials posted above.
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Wait a bit more and if nothing happens try rebooting to fastboot.
If fastboot is accessible try flashing the latest dev rom.
ebrehemx said:
I can see 9008E. So I just bought a deep flash cable and was able to flash global stable rom with success message.
When I pressed power button, nothing happened.
When I pressed -vol+power, nothing.
when I pressed +vol+power, nothing.
Then I pressed -vol +vol +power together and the screen showed mi logo and android logo at the bottom. Attached picture. It's been like this for 30mins already. It doesn't seem to finish booting. Should I wait?
Click to expand...
Click to collapse
Did you flash all partition including storage? If I remember correctly, this shouldn't take more than 10-15 mins to boot up or even less. If it's still stuck, you should select 'flash all including storage' in Mi flash.
Or
Since your phone can boot into fastboot now, I would suggest to unlock it unofficially and flash zcx twrp recovery and than flash the rom through recovery after formatting all data.
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
Just get a permission from xiaome and unlock your device and then flash custom recovery change the rom(sorry for bad english)
ebrehemx said:
Device booted after flashing Chinese developer rom. However, another issue seems to have sprouted from this.
There is a prompt saying "Cant Get Valid Device ID"
Click to expand...
Click to collapse
You lost your IMEI and Modem. Try this -> https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Does the "Radio: OFF" status mean it's being kept forcibly off by the system. i looked for an option to turn it on with no success...
aizen_souske said:
Something like this happened with me...thankfully my device was under warranty and my motherboard was changed in 2 hrs..now I unlocked officially after taking permission and using custom rom now
Click to expand...
Click to collapse
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Yogendra Kher said:
Same thing is happened with me.
No recovery,No fastboot.
Took my phone to service center & they changed motherboard.
Now bootloader is locked & IMEI changed.
Tried to unlock using old account but now it shows error at 50%
How to unlock it again?
Click to expand...
Click to collapse
50% error is prety common..bothibg to do with your device..thabkfully i never had such issues..but u can find plenty of youtube videos adressing this issue
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
ebrehemx said:
My phone box has only one IMEI code. I was able to restore that imei to the sim 2 slot. sim 1 slot has some unknown imei1.
However, after much effort flashing many roms trying many methods for efs/imei restore, i was not able to get the sim cards working. none of the sim slots work.
Click to expand...
Click to collapse
U did somethibg wrong..u have to use imei fixer and input your own imei given at the back of box..dont.input some random imei..imei spoofing is illegal
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
apriores said:
I have also lost IMEI, sent to service and motherboard was changed with IMEI. The problem is the new motherboard, which keeps rebooting, suddenly and randomly. When starts to reboot, it never stops and keeps rebooting on Mi logo - never get to loading MIUI. Even if I flash the MIUI (global) again through EDL, same thing happens. After some time, it will revive again by itself and starts booting. My fault is I didn't backup nvram with the build came from service, but with global stable after I have updated.
It sounds as a hardware issue, or it could be resolved by some software flashing/modification?
@Yogendra Kher Do you have any issues with new motherboard?
Click to expand...
Click to collapse
No
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
StormTrooper89 said:
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
Click to expand...
Click to collapse
Does touch work in twrp?
sotosgolf said:
Does touch work in twrp?
Click to expand...
Click to collapse
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
have you tried reflashing miui through mi flashtool in fastboot mode?
If you can fast it to fastboot perhaps flash the original miui. Maybe you flash a 75hz kernel that some pocophone is not compatible I already did that but twrp is sure working for me though.
StormTrooper89 said:
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
Click to expand...
Click to collapse
If you have kept a vendor image backup of after you unlocked the phone, flash it. Differently, your only option is flashing your original miui via fastboot (not an update).
StormTrooper89 said:
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
Click to expand...
Click to collapse
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
D1stRU3T0R said:
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
Click to expand...
Click to collapse
I flashed Lawrun K. But don't worry I didn't blame him the dev for the cause of my phone.
I already flash stock miui using miui flash tool. Even flash the outdated version in hope that it will back to normal but it's not.
What bad is that in any screen, either home, stock recovery nor twrp the touchscreen won't work. The rest work perfectly. It can boot, can flash via adb, flash tool whatsoever.
Right now i cant replace my screen yet due to covid19 restrictions order to stay at home and all shops closed. If any of you guys have idea please do share. For the dev of Lawrun Kernel, it's not your fault. I already understand the risk of flashing all this tweaks.
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
stinka318 said:
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
Click to expand...
Click to collapse
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
StormTrooper89 said:
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
Click to expand...
Click to collapse
It is ashame that there not some sort of way to modify Samsung's remote system that you plug it in to your laptop and can control it without the use of the touch screen.......