Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Nobody with info or help/link/having the same issue ?
Attempt to calibrate the proximity sensor and light sensor ... maybe help...
Hello !
I tried to access the proximity sensor test from the "CIT(?)" by pressing multiple time on "Kernel version "(about phone->kernel) but nothing opened (it's telling me "Launching cit" but nothing happened) ... the menu opened on the phone of my brother tho.
( en.miui.com/thread-110628-1-1.html instruction from here)
Uhmi said:
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Click to expand...
Click to collapse
Why there's no lockscreen when you wake up? Does the screen light up when shows black(try to verify in dark room)?
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
nasko_spasko said:
Why there's no lockscreen when you wake up?
Click to expand...
Click to collapse
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
nasko_spasko said:
Does the screen light up when shows black(try to verify in dark room)?
Click to expand...
Click to collapse
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
nasko_spasko said:
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
Click to expand...
Click to collapse
Yeah it appear as fast as any other redmi note 2 (i just tried now)
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
Click to expand...
Click to collapse
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Uhmi said:
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
Yeah it appear as fast as any other redmi note 2 (i just tried now)
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Click to expand...
Click to collapse
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
nasko_spasko said:
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
Click to expand...
Click to collapse
I followed these instruction from the seller (more than 2 weeks ago) :
Hi friend,
Please would you have a try to flash firmware to check?
Xiaomi_Redmi_Note_2_MIUI_7_PC_Lang_1009.zip
699.0 MB
mega.nz/#!yM9CnDqK!ntcKry0LliM_vfNFZmy3rXt3spbkT1Ueg8_eAyagdS4
Steps:
1. download the phone driver from this link:
androidxda.com/download-xiaomi-usb-drivers
2.install the driver to your PC.
3.turn off your phone,press volume down and power button at the same time until you enter fastboot mode.
4.double click "Redmi_Note_2_Flash_click_me.cmd" to run the flashing tool.
5.connect your phone to PC,the flashing will be processing automatic.
6.after flashing success,reboot your phone.
=====================
Redmi Note 2 Flashing Guide Video.mp4 280.6 MB
mega.nz/#!aJ1BxT7Z!cSE7FDvFk0snSni0R-TR7oQfh06KRyC0nwPOFe9E-Zc
Jenny
Click to expand...
Click to collapse
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Uhmi said:
I followed these instruction from the seller (more than 2 weeks ago) :
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Click to expand...
Click to collapse
this is fastboot method, not SP Flash Tool Download method.
I'll try to explain fast.
Download latest version of SP flash tool > Google search It
Install mediatek VCOM drivers to your Windows PC, if on Linux there's no need of driver. See this tutorial. For the redmi note 2 on step 4 you have to do it without the battery. The whole flash procedure is performed with removed battery.
After a successful driver installation proceed with loading the firmware in SP Flash Tool. Download the latest global stable rom, fastboot format -arround 1GB. Extract the folder that contains The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Disconnect your device and remove It's battery.
In SPFT Browse for mt6795androidscatter and all the partition should load automatically in the listbox bellow. On combo box download mode choose Firmware upgrade and hit the big Download button.
Now connect your device with battery removed. and all should go smooth.
I did It on Linux, because I don't really use Windows.
Feel free to ask further questions, will answer asap.
Choosing to do this is dangerous but this is the only method that flashes preloader and dsp and uboot parts. Take your own responsibility on this!
Bye!
nasko_spasko said:
The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Click to expand...
Click to collapse
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Uhmi said:
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Click to expand...
Click to collapse
Well, in this case It's either from the LCD or the PCB of the device not sure how to verify right now.. Do You have another one, i mean device or at least spare LCD screen?
Best option here is to return for service.
I have Touchscreen issue on my hermes and I won't send it back because I don't want to wait another 2 months, I'll fix it on my own. The screen costs me ~28USD, so I'll go with It.
What I fear is that in Your case might be a faulty PCB. That means even if you replace the LCD the problem may remain.
Yeah I don't know...
Juste noticed the flash/light don't work either...
mmmh.
Here. Link for 7.0.8.0 global ROM for SPFT, just in case.
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
darko150 said:
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
Click to expand...
Click to collapse
Sorry! Link updated.
Related
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??
So whats the problem is that.... I like to work on other custom roms from xda developers.so I need to unlock my bootloader and the rest happened. Everything is fine for about a year, shifting from one custom rom to other like those,...but donna a few days back while flashing a rom, something gone wrong, so from then whenever I press the power button the mi logo used to come up for a sec and will force shuts down. Neither the recovery mode turns on.Then I thought I may ended up hard bricking my device. But whats stunning is that fastbood mode used to remain active if I press power + vol- key. I could have recovered that issue by flashing stock rom using mi flash tool and all that procedure but then I was in a case without internet and not even a computer to do so. So in a hurry burry situation I took that phone to a normal repair shop....not to the authorised MI care (this is where I made mistake).the technician there took abt 8 hrs to repair and finaly gave me the repaired phone. at that time I didnt check the phone thoroughly (this was my 2nd mistake). The next day morning when I was answering a phone call , I noticed that the phones display not turning off. So here the problem started...whole sensors are not at all detected on not even working. So here the issue I would like to bring to ur kind notice is that what could have been the reason for this to happen....is that a software issue made by that technician or any hardware issue (may be the technician might have damaged the IC or he must have intentionally damaged it to get some money so I would have turned up to him again) or any software issue.....
any sort of comments are highly encouraged here.....plz help me out of this situation.....
Just flash persist.img
(You will have to unlock bootloader)
From any of miui ROM fastboot version
Get persist.img then flash it through fastboot
Fastboot erase persist
Fastboot flash persist persist.img
Fastboot reboot
Ok.....will try that and let u know....
tkz bro #[email protected] is fine now....could u say...what would have been the issue made by that technician
Roopesh123 said:
tkz bro #[email protected] is fine now....could u say...what would have been the issue made by that technician
Click to expand...
Click to collapse
Oh :good: pressing thanks would be gr8
while flashing it might corrupted persist partition
[email protected] said:
Oh :good: pressing thanks would be gr8
while flashing it might corrupted persist partition
Click to expand...
Click to collapse
"done"....tkz once again bro
i have replaced the display and after that the phone not working anymore
everytime i try to turn on sony xperia z2 a red light flashes 3 time and nothing appear on display
then i have replaced the battery and the same problem still
is there any solution as i tried every solutin on youtube ?
TBS2002 said:
i have replaced the display and after that the phone not working anymore
everytime i try to turn on sony xperia z2 a red light flashes 3 time and nothing appear on display
then i have replaced the battery and the same problem still
is there any solution as i tried every solutin on youtube ?
Click to expand...
Click to collapse
I had that same issue I unlocked the bootloader and flashed a custom rom RR 7 via recovery TWRP, and it started working normally and flashed back the stock ROM and voila!! back to the glory again
killerjoy01 said:
I had that same issue I unlocked the bootloader and flashed a custom rom RR 7 via recovery TWRP, and it started working normally and flashed back the stock ROM and voila!! back to the glory again
Click to expand...
Click to collapse
but how to do that if the phone not working " 3 red lights of death" and nothing appears on the display?
TBS2002 said:
but how to do that if the phone not working " 3 red lights of death" and nothing appears on the display?
Click to expand...
Click to collapse
have you checked if fastboot and flashmode work ??? if they do try flashing because I think the part you changed have some kind of a serial code that the software installed doesn't recognize, and so fails to boot, so you have to flash a new ROM and reset the saved serials
Hi, Please can you send me the tools that you used in this process and tell me in step by step how you did it, Thank you very much
TBS2002 said:
Hi, Please can you send me the tools that you used in this process and tell me in step by step how you did it, Thank you very much
Click to expand...
Click to collapse
First, install Xperia Companion from here " http://www-support-downloads.sonymobile.com/Software Downloads/Xperia Companion/XperiaCompanion.exe " and click on Software Repair and follow the instructions, if this doesn't work, let me know I will assist you further. I am sorry I didn't answer sooner I was on vacation
Hello members,
i'm stuck in difficult situation.. i tried to flash VIVO Y83 (MT6765) (android 8.1) with STOCK ROM using (miracle thunder & SP Flash tool). I succeeded flashing stock rom (downgrading). i was happy but when i switched on my phone, display was black (it has white screen or shaky and distorted color display where i can see welcome screen, it was untill i flashed it with stock firmware, but as soon as i flash it with updated version of stock rom, the screen goes totally black)..
i also searched internet.. i learn about no rollback feature(no downgrade possible, might be the reason idk) , lockedbootloader (but, i unlocked the bootloader using miracle thunder, when i flashed it for the first time with stock rom) .. etc....
After turning the device ON, it was stuck on welcome screen with shaky display (or black screen with different version of stock rom) and it doesn't turn OFF even after pressing the power button for sometime or boot in fastboot mode, i can click screenshot( i hear the sound of camera clicking) or adjust volume by using volume buttons and power button... i switch off my device manually by removing battery..
One more thing.. i can flash the phone with spflash tool but with miracle thunder it shows "error0_0" while flashing.. I also came to know that when i tried to write perloader from stock rom using miracle thunder it says "BADFILE.. does not write to phone" so, i tried to read the preloader file from the device and save it.. and use it to write and i got no error.. but phone was still stuck on BLACK SCREEN..
CAN ANYONE HELP ME FIX IT... or Any Suggestions ? ...
[i can also provide logs of miracle thunder(let me know that)..]
i also want to know that Is the problem cuz of the da file because i used a da and auth file from a thread post saying, "special da and auth for MTK devices like y83, y81, e.t.c..
i can only flash with these special da and auth file, cuz the da file from sp flash tool(tried different versions) or miracle thunder or from stock rom doesn't work ( i got brom errors)..
P.S.- I have no old or previous backup & it's a secure boot mediatek device...
Sorry about the stupid poll, i'm a noobie.. i'm still learning about the forum.
Y83Bricked said:
Hello members,
i'm stuck in difficult situation........P.S.- I have no old or previous backup & it's a secure boot mediatek device...
Click to expand...
Click to collapse
sad that no one replied. is that device in warranty? at this point it would be best to replace it from the company itself if that's in warranty.
Sudeep Duhoon said:
sad that no one replied. is that device in warranty? at this point it would be best to replace it from the company itself if that's in warranty.
Click to expand...
Click to collapse
Thanks for replying
Actually, i fixed it and its working fine now..
though i'm still finding a way to root it
Y83Bricked said:
Thanks for replying
Actually, i fixed it and its working fine now..
though i'm still finding a way to root it
Click to expand...
Click to collapse
Can you make a guide to unlock bootloader
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
WoW2ndJob said:
Hello ,
My friend has issue with his huawei p20 lite (ANE LX1).
He poked needle in earphones connector and his screen went black.
When the phone is booted to the android os, I can see for a split second (less than 5ms) screen on what is it, which is impossible to naviage since i have to press power button multiple times to show once.
But the Fastboot&Rescue mode as well as download mode works fine.
Soo How can i flash rom+firmware on it, since mostly what I find on google is "Exit from Rescure&Fasboot mode
Click to expand...
Click to collapse
Hi,
IMO the best solution is searching for the Service rom on https://androidhost.ru/ (type ANE- or ANNE- , the correct FW depends on the current version of Android and your region - Cxxx), and doing the dload method from SD card. Process will erase all the data from your device !
Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader.
Funky enough will download tomorrow, since my network speed is crap.
Another thing while holding vol+ with vol- and power button it gives me in ADB recovery, since i cannot see the screen i dont know what it shows.
Also to mention I've pulled from fastboot all info
product model ANE-LX1
build ANE-LX1 9.1.0.306
hw/eu
And the Cxxx is matching except the last 2 T8 for example.
I think I've found culprit. Seems like the backlight is dead for some apparent reason or totally turned down, not even In dark i can see the screen, except on the lock screen where i see the warning the phone has been recently turned off then on input password.
But why is then working absolutley fine in fastboot&rescue mode?
If you do not belive me ill upload pictures.
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
WoW2ndJob said:
https://ibb.co/MML06Vb - normal
https://ibb.co/ZL3wtJn -rescue mode.
Click to expand...
Click to collapse
I believe you , but if it's HW problem (damaged motherboard, short circuit etc.), I can't help you anymore. Have you tried dload method with Service ROM?
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
AmorPower said:
I have my Huawei p20 lite ANE-LX2 stuck on logo, bootloader is lock at the same time. Can i perform DLOAD method through system Recovery? to flash stock firmware? thanks
Click to expand...
Click to collapse
Yes, You can (process will erase all Your data) . Use Service ROM only!
bozka1 said:
Yes, You can (process will erase all Your data) . Use Service ROM only!
Click to expand...
Click to collapse
Thank you! gotta do this later and give an update. God bless
AmorPower said:
Thank you! gotta do this later and give an update. God bless
Click to expand...
Click to collapse
my phone can't enter recovery mode, it only booting constantly