Galaxy S 5.0 WiFi won't boot after failed Odin flash - Android Q&A, Help & Troubleshooting

Hi people of the XDAdeveloper forum!
I should probably start off by saying that I'm a clueless noob when it comes to flashing custom ROM's and such. My device is not rooted and it is completely clean nothing on it whatsoever.
Now that I've gotten that off of my chest; I have a problem; after doing everything this guide told me: Can't post links yet so hopefully I can put them in the comments. I thought my first time flashing would be smooth sailing... Well no, now it is showing this image on my screen: Can't post links yet so hopefully I can put them in the comments. The image on my screen is, to the best of my descriptive capabilities; a phone with a dotted line to a monitor/desktop with an orange exclamation mark in the middle of the dotted line First I was still in the downloading boot thingy, and then I removed the USB cable, which I probably shouldnt've done. Odin v1.83 now keeps telling me the below:
(BTW before Odin v1.83 I first used Odin v1.87, but with that one the exact same thing happened.) This is what Odin looks like exactly for me as of writing: Can't post links yet so hopefully I can put them in the comments.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0) **second time pressing ''start''**
<OSM> All threads completed. (succeed 0 / failed 0) **third time pressing ''start''**
I'm absolutely clueless as to what to do now, can anyone please help me?
Many thanks.

Bump
Bump I need help

Related

[Q] NOOB with an Galaxy S4 stuck on OC1 lollipop

Hey there guys.... Please read this first so I don't get flamed for taking a OTA update on a non rooted phone.
Heres the skinny.... My buddy gave me his old Galaxy S4 (Verizon I545). When I got it from him, it had KIt Kat on it. His phone was not hooked up with Verizon, since he just got a S5 and switched to AT&T. So I popped in my Tmobile sim card and away I went I had NO problems what so ever for three days. I wake up, and BAM it's Lollipop.
NOW, when it's on 4G, I can't send sms messages (but I can recieve them). I CAN send however send and recieve MMS messages. Internet, and phone work perfect. I have tried everything (wipe cached partition, reboot, clear data for messaging app, etc...), no luck
MY GOAL: Being that I live on a rural area (about 20 minute drive to get cell service), I have been using my wifi calling on my Tmobile phone (prior to taking the S4). My master plan was to root and flash a rom (like insane Kit kat) that would enable the wifi calling..... BUT it went to Lollipop before I could do so.
Now I cant send SMS, NOR can I flash it either.... OR could I??? Any help would be appreciated guys (and girls)..
NOTE: I have tried KingoRoot, and Towelroot... none supported my phone...
Thanks for your input in advance
fricci4993 said:
Hey there guys.... Please read this first so I don't get flamed for taking a OTA update on a non rooted phone.
Heres the skinny.... My buddy gave me his old Galaxy S4 (Verizon I545). When I got it from him, it had KIt Kat on it. His phone was not hooked up with Verizon, since he just got a S5 and switched to AT&T. So I popped in my Tmobile sim card and away I went I had NO problems what so ever for three days. I wake up, and BAM it's Lollipop.
NOW, when it's on 4G, I can't send sms messages (but I can recieve them). I CAN send however send and recieve MMS messages. Internet, and phone work perfect. I have tried everything (wipe cached partition, reboot, clear data for messaging app, etc...), no luck
MY GOAL: Being that I live on a rural area (about 20 minute drive to get cell service), I have been using my wifi calling on my Tmobile phone (prior to taking the S4). My master plan was to root and flash a rom (like insane Kit kat) that would enable the wifi calling..... BUT it went to Lollipop before I could do so.
Now I cant send SMS, NOR can I flash it either.... OR could I??? Any help would be appreciated guys (and girls)..
NOTE: I have tried KingoRoot, and Towelroot... none supported my phone...
Thanks for your input in advance
Click to expand...
Click to collapse
Never heard of something like this before... I'd think that there is no way back...
i have the same problem. if there is a rollback to kitkat
If the build number ends with OC1, then there is no going back. If it ends with something else... Possibly hope
XxD34THxX said:
If the build number ends with OC1, then there is no going back. If it ends with something else... Possibly hope
Click to expand...
Click to collapse
Can we do something to fix the sms issue?
eliah1 said:
Can we do something to fix the sms issue?
Click to expand...
Click to collapse
Yes 100%.
http://forum.xda-developers.com/gal...w-lollipop-t3099930/post60868269#post60868269
We are on stock rom and can t root the OC1.
Sent from my SAMSUNG-SM-G900AZ using XDA Free mobile app
XxD34THxX said:
Yes 100%.
http://forum.xda-developers.com/gal...w-lollipop-t3099930/post60868269#post60868269
Click to expand...
Click to collapse
That's awesome.... being a noob and you a senior member, I have a noob question, if we have a non rooted OC1, how can we get into the rom to do it? I thought we couldn't root it yet?
OC1 does not have root or ROM availability. Nothing can me nodded on OC1.
Repair your Device to Match T-Mobile!!
So, this is a Bit risky.....!!!!!!!
The reason is Because the device is trying to Connect to a Verizon APN. If you factory restore the Device to the T-Mobile Variant, It will Work Flawlessly!
BACKUP ALL YOUR DATA!!! This will WIPE EVERYTHING!!!!
These files are intended to be used with ODIN ONLY!! If at any time ODIN FAILS, pull battery, re-insert battery, go back to "ODIN Mode" and try again.
Here are the Two files you will need to Repair the Device to Be a T-Mobile Device!
These packages are Direct from Samsung and includes the PIT for partitioning!!
ODIN v.3.10:
https://drive.google.com/file/d/0B4RU_ZH5QUASSWhaMmdiaFJ1Tm8/view?usp=sharing
SGH-M919 Service Files:
https://drive.google.com/file/d/0B4RU_ZH5QUASbk5TMU9rdGtwTlU/view?usp=sharing
Extract the Two (2) Downloaded Zips
Right-Click on the "ODIN v.3.10.exe" and "Run as Administrator" on your Windows PC.
Click on each of the 4 buttons below and browse to find matching file in extracted image folder:
BL = BL_****.tar.md5
AP = AP_****.tar.md5
CP = CP-MODEM-****.tar.md5
CSC = CSC-****.tar.md5
Check the following boxes:
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Put 100% charged device into ODIN Mode, and connect to PC USB with Original Cable.
Check there two boxes in ODIN:
Phone Bootloader Update
Clear EFS Partition
Hit the "Start" button
Once the Device reboots, Wait Ten minutes for Programming to occur.
Perform Two [2] FDR (Factory Data Reset), Just bskip thru the Wizard.
Phone is back to complete stock!!
Just to confirm, and not to doubt you (KaosMaster), have you done this, and can you point me to people who have? I know there is risk involved with any of this, but even a small problem can seem like a huge problem to a cell phone noob like me lol... Honestly, I have a lot of experience logging, and reflashing the ecm computer on my Mistsubishi Evo... Although its not a cell phone, it's the same premise in theory. :laugh: :laugh:
@KaosMaster
Also just to be clear, this will work with a NON rooted phone, that CANT be rooted at this time??
This is the STOCK Method! NO ROOT
fricci4993 said:
@KaosMaster
Also just to be clear, this will work with a NON rooted phone, that CANT be rooted at this time??
Click to expand...
Click to collapse
this will Completely reprogram your device to T-Mobile, yes it has been done before by others if you wanna Google Search!!
Worst case is that ODIN Fails To flash and we have to reload the Verizon Software!
You can reach me on Hangouts if you need any Personal help, being a NOOB!! XD
KaosMaster said:
Click on each of the 4 buttons below and browse to find matching file in extracted image folder:
BL = BL_****.tar.md5
AP = AP_****.tar.md5
CP = CP-MODEM-****.tar.md5
CSC = CSC-****.tar.md5
Check the following boxes:
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Put 100% charged device into ODIN Mode, and connect to PC USB with Original Cable.
Check there two boxes in ODIN:
Phone Bootloader Update
Clear EFS Partition
Hit the "Start" button
Once the Device reboots, Wait Ten minutes for Programming to occur.
Perform Two [2] FDR (Factory Data Reset), Just bskip thru the Wizard.
Phone is back to complete stock!!
Click to expand...
Click to collapse
Every file I try to open with ODIN i'm getting a md5Error! Binary is invalid
here is the message box within ODIN
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> BL_M919UVUFNK2_2437203_REV06_user_low_ship.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> AP_M919UVUFNK2_2437203_REV06_user_low_ship.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CP_M919UVUFNK2_2437203_REV06_user_low_ship.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CSC-TMB_M919TMBFNK2_2437203_REV06_user_low_ship.tar.md5 is invalid.
<OSM> End...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> BL_M919UVUFNK2_2437203_REV06_user_low_ship.tar.md5 is invalid.
<OSM> End...
OPPS!! Sorry!! ;/
Please rename the file, and just delete the ".md5" portion, and the files should work! I will re-upload shortly!!
KaosMaster said:
Please rename the file, and just delete the ".md5" portion, and the files should work! I will re-upload shortly!!
Click to expand...
Click to collapse
Removed those md5 file extensions but now heres the next issue i have
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
on the ODIN MODE (on phone screen) shows this:
ODIN MODE
PRODUCT NAME : SCH-I545
CURRENT BIANARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: Off
CSB-CONFIG-LSB: 0X30
SECURE DOWNLOAD: ENABLE
WRITE PROTECTION: Enable
eMAC BURST MODE: Enabled
START (224,1440)
ERASING USERDATA PARTITION
SECURE CHECK FAIL : PIT
So I clicked on the PIT button within the ODIN v3.10 and selected the PIT_JFLTE_USA_TMO.pit file andthis was the result
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dragon1018 said:
Removed those md5 file extensions but now heres the next issue i have
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
on the ODIN MODE (on phone screen) shows this:
ODIN MODE
PRODUCT NAME : SCH-I545
CURRENT BIANARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: Off
CSB-CONFIG-LSB: 0X30
SECURE DOWNLOAD: ENABLE
WRITE PROTECTION: Enable
eMAC BURST MODE: Enabled
START (224,1440)
ERASING USERDATA PARTITION
SECURE CHECK FAIL : PIT
So I clicked on the PIT button within the ODIN v3.10 and selected the PIT_JFLTE_USA_TMO.pit file andthis was the result
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I had the same error on my veriso I5454
Ok. Try no repartition, and skip the pit file
KaosMaster said:
Ok. Try no repartition, and skip the pit file
Click to expand...
Click to collapse
Same thing
Ok. I need to find the lollipop version for tmobile. Give me a few

error flashing with Odin3

I get this error when trying to flash my phone with Odin3:
[oops it appears I'm not allowed to post a screenshot!?]
...
<ID:0/012> NAND Write Start!!
<ID:0/012> BcmCP.img
<ID:0/012> FAIL!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads complete. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After hours of searching I often find these 3 anwsers:
- odin3 needs to be started as admin, not as normal user
- micro usb card needs to be removed from phone
- the firmware download from sammobile is not compatible with Odin3
I did the above, flashed with the 3 different versions I could find, but keep getting this error. How to fix this?
Samsung galaxy y young GT - S5360
5 lollipop cyanogenmod 7 android L mod by Duca
no one got an answer? :crying:

*** Impossible to access to Recovery mode ***

I am using a Samsung Galaxy Grand 2 smartphone series SM-G7102
The smartphone is rooted and it's already working on a Cyanogen ROM , using ROM of this thread : https://forum.xda-developers.com/galaxy-grand-2/orig-development/dev-preview-lollipop-galaxy-grand2-sm-t2949693
I am having troubles with some functionnalities using my phone, so I decided to install a new ROM (https://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrectionremix-v5-8-0-t3534403)
The problem is : I can never access to recovery mode, have used used : VOL UP+MENU+POWER || VOL DOWN+MENU+POWER
But it always goes to downloading mode
I have tried to install a CWM like included in this thread https://forum.xda-developers.com/showthread.php?t=1837605
It goes well and the phone reboots normally. Here's the Odin log :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when trying to boot into recovery mode, it always goes to download mode
Text included in Download mode :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
UDC START
EDIT
The reason behind this wanted change is because the annoying appearance of these messages :
android.process.acore has stopped
Unfortunately, the process com.google.process.gapps has stopped.
I have disabled "Google Play services" & "Google Play Store" to prevent these messages from appearing again : I used substitutes instead like Yalp & F-droid : I have had a good time with my phone for months, but lately there appeared other annoying problems :
1- I can not activate WiFi !!
2- Whenever I use Camera there's : photos taken are black AND/OR not saved
3- I can never access galery
4- I can only go through the File Manager but I can no longer manipulate files : create directories ..
Any solutions for any of these problems please ??
ahmed_aek said:
I am using a Samsung Galaxy Grand 2 smartphone series SM-G7102
The smartphone is rooted and it's already working on a Cyanogen ROM
I am having troubles with some functionnalities using my phone, so I decided to install a new ROM (https://forum.xda-developers.com/ga...lopment/rom-resurrectionremix-v5-8-0-t3534403)
The problem is : I can never access to recovery mode, have used used : VOL UP+MENU+POWER || VOL DOWN+MENU+POWER
But it always goes to downloading mode
I have tried to install a CWM like included in this thread https://forum.xda-developers.com/showthread.php?t=1837605
It goes well and the phone reboots normally. Here's the Odin log :
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
ODINRecovery.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
RQT_CLOSE !!
RES OK !!
Removed!!
Remain Port .... 0
All threads completed. (succeed 1 / failed 0)
But when trying to boot into recovery mode, it always goes to download mode
Text included in Download mode :
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A2, P2
UDC START
Click to expand...
Click to collapse
Try holding vol+, home, and power. Let off of power once the splash image shows up.
Sent from my KYOCERA-C6745 using Tapatalk
RealWelder said:
Try holding vol+, home, and power. Let off of power once the splash image shows up.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
I DID , but nothing changed
Ha. Sorry, just posting because RealWelder's sig cracked me up - the Kyocera C6745 is what I totally expected this thread to be about when I saw the title, not a Samsung. (I swear it doesn't actually have a recovery, I don't care what the handful of people claiming to be able to boot the C6745 into it say...)
lugnut2099 said:
Ha. Sorry, just posting because RealWelder's sig cracked me up - the Kyocera C6745 is what I totally expected this thread to be about when I saw the title, not a Samsung. (I swear it doesn't actually have a recovery, I don't care what the handful of people claiming to be able to boot the C6745 into it say...)
Click to expand...
Click to collapse
I know this isn't the right place for this, but, the Hydro Air does have recovery... It's just stock though. The only way to get to it is to adb reboot recovery. The lack of root and recovery is why I use it as my daily... I don't know how many times I've soft-bricked my daily and had to be without a phone until I figured it out. Lol.
Sent from my KYOCERA-C6745 using Tapatalk

Galaxy S7 downgrade fails!

hello!it's a pleasure to be here!i'm here to ask your help!i try to downgrade my S7 from Android 7 Nougat to Android 6.0.1,but when i try to do the operation,for the first time downgrade fail,i unlock OEM and USB debugging,i think it's something with CSC maybe?however:
<id:0/004>Odin engine v(ID:3.1207)..
<id:0/004>File analysis
<id:0/004>SetupConnection..
<id:0/004>Initialzation
<id:0/004>Set PIT file..
<id:0/004>DO NOT TURN OFF TARGET!!
<id:0/004>get pit for mapping..
<id:0/004>complete(write) operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
this is what Odin say,any idea?thanks!(i unlock OEM and USB debugging.)

Stuck on Samsung Logo, No Recovery, No charge..(SM-G955U)

I have a Galaxy S8+ (SM-G955U).
After a few days it was working just fine, then suddenly after I let it die out of charge, it did not turn on. During this state, the phone was rooted.
First, the Issue was loading into Download mode (still happening), it loads but the screen is black. I use Odin so it tells me when the Pc recognize it, and it does. I tried flashing stock ROM with Odin but it stays on setup and if not it stays on Initializing forever, now the problem is a bit easier to solve because it just stays stuck on the Samsung Logo. Odin Recognizes my device but doesn't flash anything. It says on analysis forever and if it continues to setup connection it stays there for 15-20 minutes . It fails. <OSM> All threads completed ( succeed 0 / failed 1).
I can only boot to Download Mode nothing else. Not even Recovery Mode.
Not sure if this matters but this is my full model
SM-G955UZKATMB ( Tried finding this exact firmware but no luck.
I don't have a recovery mode for some reason it won't boot to this mode only Download mode.
Not sure if this matter but it doesn't charge either, it stays on the charging state, a blank circle with a thunderbolt symbol inside.
IF anyone has any idea or hint of what I can do, please comment.
Thanks again.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis.. (TAKES A WHILE)
<ID:0/009> skip file list for home binary
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> persist.img.ext4
<ID:0/009> Home Binary Download
<ID:0/009> SetupConnection.. (TAKES DOUBLE THE WHILE)
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe more expertise is available here: https://forum.xda-developers.com/galaxy-s8+
zen2o1 said:
I have a Galaxy S8+ (SM-G955U).
After a few days it was working just fine, then suddenly after I let it die out of charge, it did not turn on. During this state, the phone was rooted.
First, the Issue was loading into Download mode (still happening), it loads but the screen is black. I use Odin so it tells me when the Pc recognize it, and it does. I tried flashing stock ROM with Odin but it stays on setup and if not it stays on Initializing forever, now the problem is a bit easier to solve because it just stays stuck on the Samsung Logo. Odin Recognizes my device but doesn't flash anything. It says on analysis forever and if it continues to setup connection it stays there for 15-20 minutes . It fails. <OSM> All threads completed ( succeed 0 / failed 1).
I can only boot to Download Mode nothing else. Not even Recovery Mode.
Not sure if this matters but this is my full model
SM-G955UZKATMB ( Tried finding this exact firmware but no luck.
I don't have a recovery mode for some reason it won't boot to this mode only Download mode.
Not sure if this matter but it doesn't charge either, it stays on the charging state, a blank circle with a thunderbolt symbol inside.
IF anyone has any idea or hint of what I can do, please comment.
Thanks again.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis.. (TAKES A WHILE)
<ID:0/009> skip file list for home binary
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> persist.img.ext4
<ID:0/009> Home Binary Download
<ID:0/009> SetupConnection.. (TAKES DOUBLE THE WHILE)
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to use latest firmware for example this one :
https://samfrew.com/download/Galaxy__S8+__/hsjp/TMB/G955USQU5DSD3/G955UOYN5DSD3/
Use slow download and IDM manager ...
After that extract firmware and flash with Odin ...

Categories

Resources