Motto: Vox populi, vox dei !
Updated on July 3, 2018:
(reason in post #636)
Mod Edit :- Links Removed
As per popular request, the OpenGApps(o), Xposed(x), Rooted(s) Kit-Kat 4.4.4 firmware version for MTCB/C rk3188 units, based on JY's images from 16/03/28.
You will have the pleasure of installing the Xposed framework yourselves (the xposed installer is pre-installed). That's a relief! (for me)
The "usual suspects" are also pre-installed: mtcservice-2.60 & mtcxp-4.3, ttxp-3.3, mtc-sound-2.0.5 (but even the official version will work anyway).
Don't forget to enable the xposed modules&reboot.
Note that the included recovery, of slightly newer version (albeit still a KK one), once installed, does indeed execute the "clear all" part - it formats data and cache at the end, so the subsequent express "wipe all" seems unnecessary.
TT GO spoofing is in post #392.
Blank kernels, with no KK logo, are in post #44.
For fun&fans, kernels with dsa logo in post #53!
Developer Mode in post #332.
===
The "new" (actually old, but updated) /system/etc/install-recovery.sh is: install-recovery.sh, just in case you'd have to restore it after a(n unintended) SuperSU upgrade.
===
BTW, in principle, unless an unlikely bug is reported, I don't reply in this thread to users who are not listed as saying thank you to this post.
===
Mod Edit :- Content Removed
Thank you very much
Will test it out and report...
Best regards
EagleSoldier said:
Thank you very much
Will test it out and report...
Best regards
Click to expand...
Click to collapse
Thanks, this time I have checked it out in advance...
Many thanks. I think a lot of people will appreciate it for you.
ghoter said:
Many thanks. I think a lot of people will appreciate it for you.
Click to expand...
Click to collapse
Yeah, and counting... the thanks?!
So here a update....
Ive installed the rom twice, and after that I wiped all data.
The Rom is still perfect, it run so fast.....unbelievably
Its stable and its clean.
In my opinion this is the best Rom for 1 GB RAM devices....and trust me, Ive tryed all Roms for mtcb devices
High recommended
Thank you very much @dsa8310
dsa8310 said:
Yeah, and counting... the thanks?!
Click to expand...
Click to collapse
People can not believe that it finally happened.
Sumtin else to play with.. TY dsa8310
EagleSoldier said:
So here a update....
Ive installed the rom twice, and after that I wiped all data.
The Rom is still perfect, it run so fast.....unbelievably
Its stable and its clean.
In my opinion this is the best Rom for 1 GB RAM devices....and trust me, Ive tryed all Roms for mtcb devices
High recommended
Thank you very much @dsa8310
Click to expand...
Click to collapse
I have just updated it, with DPI 210, in the OP post.
The launcher preserves all proportions, unlike the 5.1.1 (KLD) one.
What else - Google has restored an older KK phone of mine (?), and I got the animated wallpaper from then - not bad, thanks Google! (rather a lot of "anonymous" data maintained by it...)
Though it may be a simple coincidence.
I can guess that networking is handled differently from LP, so it seems that changes to services.jar are not required.
It also appears that pretending, in mtcservice (2.39), that the wired network is of type WIRELESS is wrong because KK may then ignore it when wifi is switched off in Settings (unlike LP).
I will have to postpone all tests until I recharge my car battery, it has just failed, mid summer... After 7 hours of charging, the voltage dropped under 12V? It's a goner, isn't it?
Now under 11V... and I've got a new battery!
The fixed version of
mtcservice-2.40.apk
good only for KK (not LP, v2.38 is for LP), which spoofs only two items and leaves the wired network alone. Because KK has no problem in handling dual networking, wired&wireless, and behaves exactly as I had mended networking for LP!
Just upgrade mtcservice, there is no need to reinstall the entire firmware. The OP has been updated as well, to include it in firmware.
I believe this KK version is now done, and perfect as the LP version is.
Entre les deux, mon cœur balance...
dsa8310 said:
The fixed version of
mtcservice-2.40.apk
good only for KK (not LP, v2.38 is for LP), which spoofs only two items and leaves the wired network alone. Because KK has no problem in handling dual networking, wired&wireless, and behaves exactly as I had mended networking for LP!
Just upgrade mtcservice, there is no need to reinstall the entire firmware. The OP has been updated as well, to include it in firmware.
I believe this KK version is now done, and perfect as the LP version is.
Entre les deux, mon cœur balance...
Click to expand...
Click to collapse
@dsa8310,
I'm have to tell you that this works amazing. I have yet to finish setting up apps, but Wifi and installing apps are amazing fast..
Decided to try this out, very nice so far. Only one issue, with 'Here We Go' navigation...the app exits immediately after the splash screen with a toast error about the SD card that goes by too fast to read.
Anyone using 'Here We Go' with any success?
Andromeda_Station said:
Decided to try this out, very nice so far. Only one issue, with 'Here We Go' navigation...the app exits immediately after the splash screen with a toast error about the SD card that goes by too fast to read.
Anyone using 'Here We Go' with any success?
Click to expand...
Click to collapse
There are navigation alternatives, e.g. TomTom GO (unlimited miles, latest version, floating around), with express firmware support, as detailed in post #45.
dsa8310 said:
I believe this KK version is now done, and perfect as the LP version is.
Entre les deux, mon cœur balance...
Click to expand...
Click to collapse
Well, KK is able to switch seamlessly between wired and wifi, with no intervention of mine, when I get home, while LP perhaps still needs more mending in this area.
So KK it is, for now. On revient toujours à son premier amour...
Tested and approved ... faster than the 5.1.1..but (I have no luck I always have a small problem) I had big problem with the music player, but after two startup, It's ok (for the moment), impossible to put the car logo on startup
very good job thank you
Ok man, I love your LP ROM, but Sygic runs like an absolute dog on it. I guess it's memory intensive and I only have 1GB cos I'm no good at soldering
Guess I'll have to do another reflash with this version.
Can I flash from your current LP version to this KK without wiping all data, or does it only work going the other way (KK->LP)?
thivamero said:
Tested and approved ... faster than the 5.1.1..but (I have no luck I always have a small problem) I had big problem with the music player, but after two startup, It's ok (for the moment), impossible to put the car logo on startup
very good job thank you
Click to expand...
Click to collapse
Settings/Factory Settings(password 126)/CAR LOGO: Logo Type: LOGO Animation one ?!
dsa8310 said:
Settings/Factory Settings(password 126)/CAR LOGO: Logo Type: LOGO Animation one ?!
Click to expand...
Click to collapse
it's not working.. it's not very important
elyl said:
Ok man, I love your LP ROM, but Sygic runs like an absolute dog on it. I guess it's memory intensive and I only have 1GB cos I'm no good at soldering
Guess I'll have to do another reflash with this version.
Can I flash from your current LP version to this KK without wiping all data, or does it only work going the other way (KK->LP)?
Click to expand...
Click to collapse
See post #14 above, for the "recommended" navigation solution.
Do the flashing, and immediately after reboot, just before the first start-up, reenter recovery and do the wipe all.
But if you happen to already have flashed the July 23rd LP image, then the slightly newer KK recovery is already there, and so it is enough to do the installation entry with "clear all" because it also wipes all at the end, thanks to the better recovery.
Related
Hi,
I´m writing this post to notify that there is a new official update from toshiba.
I cannot give more information, because my folio is in SAT, but the version number might be "18/02/2011 (2.2.5.0131)". I have no info about changes yet, but I´ve red something about preparation for the new flash player and more utilities.
My source:
htcmania.com/showthread.php?p=1874046&posted=1#post1874046
(Sorry, I can´t still post urls, you may add the usual www to check the adress)
Maybe we have new materials for our favourite mods (for me, Folionotion and foliomod, I can´t decide).
Any additional info will be wellcome, thanks
herozote said:
Hi,
I´m writing this post to notify that there is a new official update from toshiba.
I cannot give more information, because my folio is in SAT, but the version number might be "18/02/2011 (2.2.5.0131)". I have no info about changes yet, but I´ve red something about preparation for the new flash player and more utilities.
My source:
htcmania.com/showthread.php?p=1874046&posted=1#post1874046
(Sorry, I can´t still post urls, you may add the usual www to check the adress)
Maybe we have new materials for our favourite mods (for me, Folionotion and foliomod, I can´t decide).
Any additional info will be wellcome, thanks
Click to expand...
Click to collapse
New update is fantastic, touchscreen is super sensitive, battery lenght really improve, And rotation od screen is super fast and smooth. Flash work perfectly. Really a great update. Finally I can say thanks Toshiba.
Impressive the laggs are completly removed
MCLP said:
Impressive the laggs are completly removed
Click to expand...
Click to collapse
Is there support to market place?
Will we have it in mods ???
I have installed it.
It seems to be more performance in 3D games.
Flash plugin preinstaled, and it can run the flash animation in Toshiba's web page .
It solves some bug about brong accelerometer axis in some games.
But no Android Market, only the same *sigh* Toshiba Market.
The question is whether we can install FolioMod on top of this update or not. For me,it's not worth updating this without DexterMod, which is already very good imo
xitrumch said:
The question is whether we can install FolioMod on top of this update or not. For me,it's not worth updating this without DexterMod, which is already very good imo
Click to expand...
Click to collapse
if you wantt custom mods, you avoid the update!!!!
THIS UPDATE WILL BLOCK YOUR UPDATE OPTIONS, AND BYE BYE CUSTOM ROMS
I confirm that the root of 5.0131 is ok yessssssss !
I'm guessing this updates the recovery kernel, and the recovery kernel is the only place that the recovery kernel is visible from to write? So root access is not enough for a simple way of updating the whole OS partition.
tshoulihane said:
I'm guessing this updates the recovery kernel, and the recovery kernel is the only place that the recovery kernel is visible from to write? So root access is not enough for a simple way of updating the whole OS partition.
Click to expand...
Click to collapse
they might have blocked it on the new update as well, making it really hard to get revert.. but on previous editions you can easily write a new recovery.
the partition is visible at partition 7, but this might have changed.
i have not had the luxury to look at the actual update, so what is inside, is for me to find out.. then we get all the nasty details.
ok guys... anyone having installed this update pls kindly report the following:
1. stability status
(crashes freezez sod)
2. software issue - can sideloaded applications be installed and used?
3. root ability ?
4. 3d games like dangeon defenders working ?
5. custom flashing ability?
sader0 said:
ok guys... anyone having installed this update pls kindly report the following:
1. stability status
(crashes freezez sod)
2. software issue - can sideloaded applications be installed and used?
3. root ability ?
4. 3d games like dangeon defenders working ?
5. custom flashing ability?
Click to expand...
Click to collapse
1. no craches or freezing
2.3d games like the one mentioned should work has a charm
3.root ability yes
4.ability to sideloads apps not tested but should be fine since you can root its easily
5 custom flashing ability yes using adb to instal first the old kernel
basicly the tablets works has it was ment to be i think that toshiba might even suprise everyone by realeasing honeycomb for this tablet in future
When I go to Toshiba Service Station, there is no update available(using Dexters wonderful foliomod). How do I get to see it and if I want to install how do I keep all the wonderful stuff on it already. This is my wifes and not mine so she will get pissed off if she loses everything on it again?
Thanks.
go back to stock rom and update it should work
MCLP said:
2.3d games like the one mentioned should work has a charm
Click to expand...
Click to collapse
you will need build.prop changes to some games working, and gameloft is still the same as CPU has not changed..
MCLP said:
4.ability to sideloads apps not tested but should be fine since you can root its easily
Click to expand...
Click to collapse
So you can use market now
MCLP said:
5 custom flashing ability yes using adb to instal first the old kernel
Click to expand...
Click to collapse
guess how many users will ask how do it i think its a step backwards, and too complex for regulars...
MCLP said:
basicly the tablets works has it was ment to be i think that toshiba might even suprise everyone by realeasing honeycomb for this tablet in future
Click to expand...
Click to collapse
unless it got market, gmail and syncing support, its not like its meant to be yet..
and honeycomb will not appear as display is just 1024x600, so no chance of a google certification for folio100 here, same as with gapps support. so forgot toshiba solving that..
Saw people got honeycomb running on nook color with the same resolution screen... no certification does not mean that is not possible...so we still can have our fingers crossed on that
sader0 said:
Saw people got honeycomb running on nook color with the same resolution screen... no certification does not mean that is not possible...so we still can have our fingers crossed on that
Click to expand...
Click to collapse
i wrote: Toshiba do not deliver, that does not mean i can't
I don't doubt you can. But I guess this screen resolution difference could cause troubles in some apps again
Just read about the new update and the issues with it. I have my Folio sent in for repair and they always update to the latest firmware before sending back to customer, so it looks like im in deep ****. I know how to use adb and fastboot, use them all the time on my desire hd and my VEGA. Maybe someone could write a good guide on how to flash this old recovery and which of all the rooting procedures that works with the new firmware. I also dont know how to get Folio in fastboot. But if we have a working root we can flash the old recovery or clockwork recovery, is that right? Because if not i might as well throw it away. No use in trying to sell it, no one will buy a useless tablet anyways. HOPING FOR A GUIDE CALLED: HOW TO RESTORE YOUR FOLIO WITH FLASHABLE RECOVERY
Arkas 0.4- Ganymede released
Removed almost all bugs .
Searching for some to patch.
Many new features .
Searching for more to add.
Check my Blog for details
Edit :- The PDA is fine but the KD1 amss_phone is not
Flash with any older amss_phone like JL1
Arkas 0.401 - Ganymede 2
http://galaxy551.wordpress.com/2011/07/24/arkas-0-401-ganymede-2/
Welcome to the new era !!
Installation Instructions :- http://androidforums.com/enigma/370845-n00b-rom-installation.html
Arkas 0.5 Dark Mercury
780 Mhz and more
http://galaxy551.wordpress.com/2011/07/25/0-5-dark-mercury-public-release/
Arkas 0.6 Dark Energon
................................
Gearloose ADB Manager
http://galaxy551.wordpress.com/gearloose/
Good Work people!. I flash it later. Cheers
EDIT: I have the i5510L phone. Don't flash the CSC or you will loss 3G. I loss the GPS with the KD4 FW but i saved the 3G.
kraka23 said:
Good Work people!. I flash it later. Cheers
EDIT: I have the i5510L phone. Don't flash the CSC or you will loss 3G. I loss the GPS with the KD4 FW but i saved the 3G.
Click to expand...
Click to collapse
Dont flash CSC,amss_phone .That way you could save your radio as well .!!!!
Yes!. I flash the phone. Sorry kara but the rom is still too green. In the first hour, the phone reboot one time and freez two times. It is more fast than the official KD4. Very smooth. Recently freez when i copying my music to the phone.Anyway...the phone run like forrest.I feel sorry return to the previous rom but the phone reboot and freez too much.
I hope new versions guys!. Tell me where i can help. Cheers.
OK .But you were too hasty to revert back . **** I wanted to run some tests .Do you have Set CPU .Change governor to Conservative that fixes the reboot cycle.
USB transfer has hitches you say .Hmm very interesting ,but it's a start and we need people to point out bugs .
How you can help : --
1.)Just use this ROM for four hours .
2.)Use SetCPU,Ti backup , and any other busybox based app together .
3.)Shut down the phone and check whether the screen switches off.
4.)Use Link2SD/dta2SD on ext4 partition of SD card
Ok!. I will use the rom more time in the name of justice!!!. Let me install the setcpu and test the "conservative" setting. Thank Kara!!
kraka23 said:
Ok!. I will use the rom more time in the name of justice!!!. Let me install the setcpu and test the "conservative" setting. Thank Kara!!
Click to expand...
Click to collapse
Well the more bugs we find ,the more will be patched . use the SEt CPU on boot to avoid further loops.
is it just me or does bluetooth not work?
semaj<3har said:
is it just me or does bluetooth not work?
Click to expand...
Click to collapse
Thank You for flashing our ROM and pointing the bug.Yes Bluetooth doesnt work,Just checked it .Appreciate your efforts.
I will not try it yet ! But i got to say thanks to put your work into this im sure i will use a stable version! Try making a tutorial on how to flash our phone! Once again
Tks a lot for the effort
yup. been using it for a day. many thanks.
aside from bluetooth, ive experienced d phone resetting itself after uninstalling a system app thru ti-b. didnt do that before the switch. the same thing goes when i do a group install using easy installer. you also hve to install setcpu first before running easy installer since the phone will hang and reset if you dont.
will give more updates once available.
Sent from my GT-I5510
sindamc said:
I will not try it yet ! But i got to say thanks to put your work into this im sure i will use a stable version! Try making a tutorial on how to flash our phone! Once again
Tks a lot for the effort
Click to expand...
Click to collapse
I specifically created it for people who know to use Odin.
I can post a tutorial but there are serious legal issues involved in publishing the tutorial without the permit of samsung.
Odin is used as Level 1 repair tool in samsung !!!
You can head to samfirmware.com and they have flash guide specifically for 551.
We cant make a stable version if dont know what makes this version unstable.
MajinkenSword said:
yup. been using it for a day. many thanks.
aside from bluetooth, ive experienced d phone resetting itself after uninstalling a system app thru ti-b. didnt do that before the switch. the same thing goes when i do a group install using easy installer. you also hve to install setcpu first before running easy installer since the phone will hang and reset if you dont.
will give more updates once available.
Sent from my GT-I5510
Click to expand...
Click to collapse
Thank you for using our ROM.
It will nice of you to mention which system app .
Does easy installer use busybox ?
-----
Double post
Im not sure if Easy Installer uses busybox, sorry.
On the other hand, system apps would include Market, Bookmark and Messaging apps. I normally remove TW and exchange it with ADW Launcher EX.
Hope we can resolve the bluetooth issue soon. Im still stress testing ur rom. Will upd8 1s I see more. I really like the 667 feature.
What freq did u uas default? It seems a little unstable imho.
Thanks again and regards.
Sent from my GT-I5510
MajinkenSword said:
Im not sure if Easy Installer uses busybox, sorry.
On the other hand, system apps would include Market, Bookmark and Messaging apps. I normally remove TW and exchange it with ADW Launcher EX.
Hope we can resolve the bluetooth issue soon. Im still stress testing ur rom. Will upd8 1s I see more. I really like the 667 feature.
What freq did u uas default? It seems a little unstable imho.
Thanks again and regards.
Sent from my GT-I5510
Click to expand...
Click to collapse
667 Mhz since three days . Never crashed and lets be honest .I have a standard 30 app test(I use only 30-40 apps regularly ).If those 30 apps work then the phone seems to work for me.I cant test all 100000 apps on the phone you know !!!
As a matter of fact I just uninstalled Twlauncher and Samsung apps .No hitch noticed !!!
Understood.
I wonder why mine occasionally resets when I perform those I mentioned earlier.
Overall, I'm happy and satisfied save for the bluetooth feature. Thanks again
Sent from my GT-I5510
MajinkenSword said:
Understood.
I wonder why mine occasionally resets when I perform those I mentioned earlier.
Overall, I'm happy and satisfied save for the bluetooth feature. Thanks again
Sent from my GT-I5510
Click to expand...
Click to collapse
I have a rough idea of what has happened.It is a serious bug ..WIll have to push the release of 0.4 forward .
I'll try to perform a data/cache wipe once I get home and redo my system app settings.
Will report as soon as possible.
Welcome to ThiaiZ V0.2
I saw that a lot of people out there would like a stock,stable,fast and rooted ROM, so i decided to make one on my own, keeping it as much as stock as possible.This is my first SGS2 ROM (got the device for 3 days ago), coming from HTC Desire which i have always developed my own ROMs.Be patient and I do really want to help this community to grow and find the best for this incredible peace of engineering called Samsung Galaxy S II.Suggestions are always welcome.
Here is how it looks:
http://www.youtube.com/watch?v=BgWJcjYbJVA
Features:
-Base: XWKF3.
-Kernel: CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.(Thanx ChainFire)
-Deodexed,Zipaligned and Signed.
-Some extra tweaks for speed and memory.
-Camera tweak.
-Everything from Samsung is still there.
-Gtalk 1.3 with video
-Native android SIP stack for Wifi AND 3G calls
-No themes (as I said, I want it stock).
-The only change is startup wallpaper.
-CRT animation. "Sorry for that guys,but u can disable it anyways"
-Desktop as Browsers UA as default. "Ops, sorry for that too, but i said i would do".
Changelog V0.2
-Apk tweaks for speed (it seem to have worked).
-Phone.apk bug from v0.1 is fixed here.
-Changed to this Kernel CF-Root-SGS2_XW_OJV_KF1-v4.0-CWM4.zip - Come on guys, choose the kernel that fits your Rom better, the one here works better for my needings, so feel free, there are lots out there.
Known bugs:
-You tell me, please.
How you Install it:
http://www.multiupload.com/1DAB68308S
-Download and copy the .ZIP file onto your SD or Phone.
-Restart device in CWM (Vol up + Home + power)
-Backup your old Rom
-Wipe data + cache (All your data will be gone)(V0.2 itself will wipe your data)
-Choose "Install Zip from SD card"
-Browse the .ZIP file and install it.
-Boot device and ENJOY.
-I'm not responsible for your mistakes you should know what you are doing.
**I do really recommend the use of Tegrak Overclock**Buy it from Market.
-I do play a lot and we know that some games like (Asphalt 6) are made to not use the whole GPUs power , it means lower FPS.But at the same time I want a longer battery life the screens to move smoothly and i don't want the device to overheat, so what I did is.
-Install Tegrak Overclock
-Load the modules
-Go to GPU optmization and change values to:
-267 - 975 and 200 - 950, if it works for me should work for you too.
Old Versions.
V0.1
http://www.multiupload.com/ZU48COCMUJ
Updates to V0.1 ,don't flash it to V0.2.
1st update is out.
-Green status icons
-CRT animation
-Desktop as browsers default user agent
Download and flash via CWM
http://www.multiupload.com/IW2MF43AHO
More is coming perhaps tomm.
For those with FC after calling, download the update below and flash it via CWM.
http://www.multiupload.com/XRF621J1RI
Looks good ...I like the idea..
Good work, thanks man
Sent from my GT-I9100 using XDA Premium App
one must use a kernel matching the ROM right? KF3 kernel for a XWKF3 ROM . I see that you have used a KE2 kernel. I am still new to android..
!
nothing new !
netcitizen said:
one must use a kernel matching the ROM right? KF3 kernel for a XWKF3 ROM . I see that you have used a KE2 kernel. I am still new to android..
Click to expand...
Click to collapse
You can actually use the Kernel you think fits better,at least for now when all the Roms out there are based on official samsung bases and so are the kernels.When I first excrated the Base, a KF1 kernel came together, but i decided that this one just works better.I'm gonna start doing a research about kernels, cause i don't think any of those out there matchs my expectations 100%.
mirot said:
nothing new !
Click to expand...
Click to collapse
Just the latest Nordic base.If u ask me if this Rom is better than the others ? I would answer that all the Roms out there are pretty much the same, have tried all of them.But this is stock and has no bugs that i have found.
wow swedish op thanks gone try this when i come home.
tackar tackar.
malavan said:
wow swedish op thanks gone try this when i come home.
tackar tackar.
Click to expand...
Click to collapse
You are welcome .
I have not switched yet, but I like what you are doing! Thumbs up!
Nice
So Far ive been running it since last nite and its running smooth. Everything is working good and i noticed browser lag is gone compared to other roms. Although Extended power options would be nice
Im grabbing this one, tackar
deimos86 said:
So Far ive been running it since last nite and its running smooth. Everything is working good and i noticed browser lag is gone compared to other roms. Although Extended power options would be nice
Click to expand...
Click to collapse
Thanx man, good to hear that. I'm now working on a update with (crt,green status icons,extended power option and a few more tweaks).Hope to be ready with everything tonight.As i said before, gonna try to keep as closest as possible to stock.Could change collors and fonts and everything in this ROM, but i'm not gonna do that.
ThiaiZ said:
Thanx man, good to hear that. I'm now working on a update with (crt,green status icons,extended power option and a few more tweaks).Hope to be ready with everything tonight.As i said before, gonna try to keep as closest as possible to stock.Could change collors and fonts and everything in this ROM, but i'm not gonna do that.
Click to expand...
Click to collapse
will wait for the update.If not already can you add battery percentage mod too?
-The only change is startup wallpaper.
-An update with (CRT,Green status icons,advanced power menu and some extras is comming soon), but that's it, I want it stock
Click to expand...
Click to collapse
you spelt coming wrong; anyway nice rom, i like the idea though ill be sticking to a barebones ROM (cognition) and ill switch to CM7 when its done
netcitizen said:
will wait for the update.If not already can you add battery percentage mod too?
Click to expand...
Click to collapse
It's going to be in the update as well.
blickmanic said:
you spelt coming wrong; anyway nice rom, i like the idea though ill be sticking to a barebones ROM (cognition) and ill switch to CM7 when its done
Click to expand...
Click to collapse
Hehe, thanx for the english lesson mate.
I hope you have increase ringtone on this rom.
Grymt!
Looking forward to that updated version!
Q&A for [DEV][ROM] - Pantech Burst - CM-11.0 portinghttp://forum.xda-developers.com/android/development/dev-pantech-burst-cm11-0-porting-t2938360http://forum.xda-developers.com/android/development/dev-pantech-burst-cm11-0-porting-t2938360
Please use this thread to all questions not related with develop.
Greetings.
I didn't want to spam this thread with a useless "thank you" post but it's pretty quiet around here anyway so what the hey. THANK YOU SO MUCH!!! This is seriously freaking awesome. I was convinced development for the Burst was going to die with that final build of SlimBean. It feels so nice to be running KitKat (way to go, 4.4.4!) on this tiny little guy who refuses to die. That bug with the test build where opening SnapChat caused a kernel panic seems to be completely gone, so thanks for taking away my excuse for ignoring my SnapChat account lol. The battery life leaves much to be desired but I'm pretty sure that's the phone and not the ROM. Thank you so much again, this is excellent work :highfive:
thisisapoorusernamechoice said:
The battery life leaves much to be desired but I'm pretty sure that's the phone and not the ROM.
Click to expand...
Click to collapse
We must not forget that the device has a battery of 1600mA, for this reason it is normal that the the device have a short battery life.
There is always the possibility of purchasing an extra battery with external charger.
Greetings.
You're right of course and this is a great rom. I apologize if it came off like I was complaining or criticizing, this is great work and I'm utterly grateful to have cm11 on my old Burst.
Thank you mifl for cm11.
First of all thanks to all devs for cm11.
I am loving it by far.
Now on topic. I have two questions-
1). Is there any app that can control vibration intensity of phone, nothing from playstore works.?
DU rom from marduk have it inbuilt and works flawlessly but rom has bugs of wifi tethering, Bluetooth and random restart. I rely on tethering heavily so i am on cm11. Is there anyway i could get it on cm11?
2). Anyone facing any random restarts.?? I faced some random restarts recently when using multiple tabs of UCbrowser. Though i wasnt able to catch anything from log. I will post if it happens next time.
3). It is taking too much time to charge if handset is kept on usage.?? Well mine does. But charger is of samsung (.7A)..
Thanks for sharing this great Rom.
God bless you.
Thanks.
herecomesmaggi said:
First of all thanks for cm11. I am loving it by far.
Now on topic. I have two questions-
1). Is there any app that can control vibration intensity of phone, nothing from playstore works.? DU rom from marduk have it inbuilt and works flawlessly but rom has bugs of wifi tethering, Bluetooth and random restart. Is there anyway i could get it on cm11 of mifl.?
2). Anyone facing any random restarts.?? I faced some random restarts recently when using multiple tabs of UCbrowser. Though i wasnt able to catch anything from log. I will post if it happens next time.
3). It is taking too much time to charge if handset is kept on usage.?? Well mine does. But charger is of samsung (.7A)..
Thanks for sharing this great Rom.
God bless you.
Thanks.
Click to expand...
Click to collapse
First the rom is not my property. It is compiled from PantechDevTeam repositories.
If you want to get the DU version, you must wait to be released this compilation or you compile DU from marduk191 repositories.
Of the mistakes you've written would be important you will provide a log, to study errors.
Greetings.
Find a 1.0 A charger, it still won't be ideal but I think you'll notice improvement
Thank you for replying. I tried using Asus zenphone 5 charger of 1.25A it worked great.
Glad I could help. If I remember correctly it was your comments on the old CM 10 thread that originally led me to Slim Bean, which was a great improvement back on jelly bean. So thank you too lol
I have found a way to lower the intensity of vibration feedback of buttons..
You will need to decompile framework-res.apk and have to look for values. Xml in res folder some where at last there will be line <integer-array name="config_keyboardTapVibePattern"> Just change its value to suitable. Recompile and flash. Btw i am using value "2" instead of 40.
Thanks.
If u need a proper guide ping me...
whatsapp camera : black screen
i am using cm11 latest build. when ever i open camera in whatsapp application i see black screen.. but if i click the snap is taken.. same with bar code scanner app as well.. tried to check the log but there is no error registered for this.. i thing i have missed some setting..
Issues Installing Custom Firmware
First of all, thanks for all your work on Burst development. Here's my issue. I installed ICS from the Pantech website and then rooted my phone a year or two ago with "The Burst Hack Tools" mentioned in the instructions. I found the instructions to install custom firmware and tried installing CM11. Everything seemed to be going fine until I restarted my phone. I upgraded CWM to 6.0.2.7 touch version and retried. Same result. The third time I thought I may have forgot to wipe the cache so I was sure to do that. Same result. Question: Do I need to do a clean install of stock 4.0.4 Ice Cream Sandwich before intalling CM11? Thanks for your help.
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
mifl said:
We must not forget that the device has a battery of 1600mA, for this reason it is normal that the the device have a short battery life.
There is always the possibility of purchasing an extra battery with external charger.
Greetings.
Click to expand...
Click to collapse
I've had good luck with this battery: Onite 1800mAh Battery for Pantech Burst P9070. Found on Amazon. I do notice the 200 mAh difference.
SparkyMcfly said:
First of all, thanks for all your work on Burst development. Here's my issue. I installed ICS from the Pantech website and then rooted my phone a year or two ago with "The Burst Hack Tools" mentioned in the instructions. I found the instructions to install custom firmware and tried installing CM11. Everything seemed to be going fine until I restarted my phone. I upgraded CWM to 6.0.2.7 touch version and retried. Same result. The third time I thought I may have forgot to wipe the cache so I was sure to do that. Same result. Question: Do I need to do a clean install of stock 4.0.4 Ice Cream Sandwich before intalling CM11? Thanks for your help.
Click to expand...
Click to collapse
Please see PDT Wiki page to install a new recovery to cm-11.0. After make this you must follow the Guide to Installing Custom Firmware in Pantech Burst Wiki Page.
Greetings.
mifl said:
Please see PDT Wiki page to install a new recovery to cm-11.0. After make this you must follow the Guide to Installing Custom Firmware in Pantech Burst Wiki Page.
Greetings.
Click to expand...
Click to collapse
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
SparkyMcfly said:
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
Click to expand...
Click to collapse
I have no answer to this, but I would also like to know if there is a work around or fix to this
SparkyMcfly said:
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
Click to expand...
Click to collapse
This is a known bug in the code of Android 4.4. I think this can be solved with Xposed Module:
* http://www.xda-developers.com/fix-external-storage-handling-with-xposed-module/
Greetings.
Help with Xposed
mifl said:
This is a known bug in the code of Android 4.4. I think this can be solved with Xposed Module:
* http://www.xda-developers.com/fix-external-storage-handling-with-xposed-module/
Greetings.
Click to expand...
Click to collapse
So I installed Exposed from here: http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v33_36570c.apk
Then I installed HandleExternalStorage from the Play store: Play Store: http://tinyurl.com/nnajr7f
I went into Exposed and enabled HandleExternalStorage. Then rebooted. Icons dissapeared.
I uninstalled a couple of apps that were on the SD and reinstalled. Rebooted. Still missing
Icons. Any help would be greatly appreciated. Thanks.
Volume wake
Please excuse my ignorance but how can one set wake on volume keys? Its a small detail that is driving me crazy.
Gapps for Cm11 pantech burst
Is there another link to Gapps for cm11 on pantech burst? the link at github si giving a 404 error. plzzz help
First I would love to say thanks to everyone who helped put this ROM together :good:
Second, I'm having a problem with my storage. When I go to apps, my internal storage and external SD storage got mixed up, now I can't download entering from the play store. Please help!!
Disclaimer. I am not responsible for anything that happends to you, your phone or dog. Im not responsible for anything that may happen if you flash this rom on your device. Flash at your own risk. First time me modding anything in life. You take full responsibility for your actions and consequences.
ROM DATE 11-12-2016 ANDROID 6.0.1 V4
UPDATED ROM 1/22/17 to V5
1. Darklord N5 modded with N7 apps. July Security patch. Sprint VVM Working and no FC on hangup!!! This rom is Universal for most carriers
2. Xposed included but not system wide must install files needed thru twrp I will provide the file.
3. Latest Viper included with adaway and some updated N7 apps.
4. Debloated as much as i could.
5. UBER Battery life
6. Latest VVM For Sprint
7. Super Smooth no lag
8. 6x5 Dock with 5x5 page
9. Hotspot
10. Themes
DOES NOT INCLUDE A KERNEL!!!!!
MUST FLASH USING TWRP 2.8.7.0!!!!
I RECOMMEND DARKLORD UX 2.0 hltespr its super smooth i get 15 hours Battery life without powersaving!!! about 40 on max settings 33 on mid. With white color theme. Black out device get up to 85 hours on max power save and 25 hr without power save.
Id like to thank the Darklord for his hard work and for letting me use his rom as a base.
Thank Audax for his kernel cleaner
Thank Buzbee for his Apns MNVO
I personally worked on this for months as you see the base is from july and that was the base i took.
I also included a MM Fix for SD card as some apps have an issue writing to SD you must install xposed to use it.
There will not be any updates for this rom unless i get some help please do not use my work without asking first.
I need someone who can help update the security patches as well as some of the base apps.
MUST USE LATEST BASEBAND AND FIRMWARE FROM SPRINT!!! which is PH1 if not upgrade to it reroot and then flash this rom.
Rom Video Installation Link
https://youtu.be/A3AbQHEjkRo
1. Watch Video (if downloaded old rom before V5)
1A. If downloaded V5 install as any other ROM use XAS or SPR CSC in aroma, reboot into recovery, clean kernel with cleaner, then install kernel of choice, reboot to system, wait 15 min. Profit.
2. Activate VM [email protected]
3. Give thanks or donate thanks for any donations
4. Enjoy
Note. Regular Message app wont work fully please use Textra or another alternate to the base one as it can send text and receive but cannot send Multimedia text. I recommend Textra Its beautiful and it automatically picks up Sprint APN Settings
PH1 Download
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
Rom Link below
New Link 1/22/2017 ALL In One Rolled UP TY @taijidude For This V5!
https://mega.nz/#!kYgzxZCT!YjDcaNfK4ec-1PNs3glWFU4NHFrNOxdaGVSfiBXjbXA
V5 Changelog
Here are the changes included:
- updated apns-conf.xml for both SPR and XAS so the network connects
- updated build.prop to include some Sprint specific configurations
Added
FlipboardBriefing (I like this app and use it daily... saw where others made comment so added it)
VVM
Miscellaneous Downloads Section
Kernel Cleaner
https://mega.nz/#!UMRFia6T!oU0uPaaTEdenkICyEoZZApfHa1-posmfzZFLL-0v8Ms
MVNO APNS
https://mega.nz/#!oEAjXLhI!bI1-MVMDOCpELXrRCMmLJ7O_ApK0kCTz-yfKLeCpqA8
Sprint VVM Version 8.0
https://mega.nz/#!RAgymRZA!e6kXAcwuL_q5der64E07Z6XPBRfgtky0El9Xr1jPzlE
3minit flashable by @Sczar Thank you so much for your help (use gravity box to get rid of the regular battery icon) also clear cache after installing the mod
https://mega.nz/#!0EVg0Cjb!gI_xodtl_MwfUKfkA5f89XIdqIe4W_8Rz7OhSmSVJQI
*Download Latest Adreno Drivers for 30% Increase in graphics here*
https://forum.xda-developers.com/galaxy-note-3/orig-development/adreno-330-drivers-note-3-t3523915
where do i get PH1 firmware
quietmode01 said:
where do i get PH1 firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
HERE =)
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
12gage said:
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Click to expand...
Click to collapse
Please read the original post. This is not like sacs. I dont have that kind of time to have that correctly fixed but its in there I just dont know how to activate those feature (PRL, Profile Update). SMS works but again not fully for Multimedia. Use alternate app for text like Textra if you want full capabilities. I did reach out to Sac23 for advice but he stated and i quote "Its not as simple as copy and paste" "Plus i no longer have a note 3 with Sprint to be able to test" Yet if any other developer has the time to help me fix it id gladly welcome it. It does not have FC on hangup
quietmode01 said:
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
Click to expand...
Click to collapse
NP. Let me know what you think.
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.
binaryimage said:
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.[/QUOTE
it takes about 15-20 minutes to boot did you flash specifically as i instructed? I just reflashed it myself and it worked. Ill try and post a video of going thru the flashing process. Sorry it didnt work out for you
Click to expand...
Click to collapse
What recovery did you use to install this rom?
When I tried installing it, it sat for well over 20 minutes on the Samsung Splash Screen.
TWRP 2.8.7.0
I have made a video of the installation boot up time was 9 minutes after the install of rom. ill post the video tomorrow after i edit it it has my phone number and i need to block it
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
binaryimage said:
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
Click to expand...
Click to collapse
Sits on Samsung for about 10 min on mine first boot. Not when it says Samsung galaxy note 3 it just says Samsung by itself
Mine might just take a little longer then normal ill give it another shot.
binaryimage said:
Mine might just take a little longer then normal ill give it another shot.
Click to expand...
Click to collapse
I added the video on the OP. Enjoy
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Maybe its a bad upload. I will upload v4 and after I make sure it work it will be uploaded tonight sorry for the inconvience
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Same thing happened to me using Darklord kernel, tried the other kernel and would get to samsung screen and just sit, i left it alone for 40 min. Had to pull battery to shut it off, glad to know its not just me. It was driving me nuts especially after watching the video and knew i did it right.
Guys i figured out it was bad coding in the build prop i have fixed and retested on 2 different note 3s its working now im re-uploading the rom. I apologize for all the inconvenience @spaceshipunicorn @binaryimage