Hello guys, I am having a Moto E 1st Gen. I got up one morning and my phone's battery was at 3%. I started using it but before the battery went down to 1%, it got shut down automatically. I don't know what happened. Earlier I could use my phone up till 1% battery. Then I connected it to charging. The strange thing is that, after sometime, I saw its notification LED glowing continuously. This was very strange and it never happened before. I took the charger out and the LED went off. I tried to power it on but nothing happened. Now situation is it is not able to power on & whenver i connect the charger, its LED starts glowing continously..... Don't know what to do. This never happened to me before in any of my phone's PLEASE HELP
verma_ayush said:
Hello guys, I am having a Moto E 1st Gen. I got up one morning and my phone's battery was at 3%. I started using it but before the battery went down to 1%, it got shut down automatically. I don't know what happened. Earlier I could use my phone up till 1% battery. Then I connected it to charging. The strange thing is that, after sometime, I saw its notification LED glowing continuously. This was very strange and it never happened before. I took the charger out and the LED went off. I tried to power it on but nothing happened. Now situation is it is not able to power on & whenver i connect the charger, its LED starts glowing continously..... Don't know what to do. This never happened to me before in any of my phone's PLEASE HELP
Click to expand...
Click to collapse
clear cache from recovery and try again
It needs some time to reach optimum charge percentage for boot. Maybe you already figured that out. Well, good luck.
verma_ayush said:
Hello guys, I am having a Moto E 1st Gen. I got up one morning and my phone's battery was at 3%. I started using it but before the battery went down to 1%, it got shut down automatically. I don't know what happened. Earlier I could use my phone up till 1% battery. Then I connected it to charging. The strange thing is that, after sometime, I saw its notification LED glowing continuously. This was very strange and it never happened before. I took the charger out and the LED went off. I tried to power it on but nothing happened. Now situation is it is not able to power on & whenver i connect the charger, its LED starts glowing continously..... Don't know what to do. This never happened to me before in any of my phone's PLEASE HELP
Click to expand...
Click to collapse
Hi.. Did you figure out how to deal with this situation. My device also stuck in the same situation and is not turning on now. Continuous LED glow when connected to charger. The charger is connected for almost 3 hours now. I also tried the key combination Volume Down + Power for about 2 minutes. It didn't even go to bootloader screen.! Please help
nmthewarrior said:
Hi.. Did you figure out how to deal with this situation. My device also stuck in the same situation and is not turning on now. Continuous LED glow when connected to charger. The charger is connected for almost 3 hours now. I also tried the key combination Volume Down + Power for about 2 minutes. It didn't even go to bootloader screen.! Please help
Click to expand...
Click to collapse
Try connecting to pc and boot
Sent from my Moto E using XDA Free mobile app
-Adarsh- said:
Try connecting to pc and boot
Sent from my Moto E using XDA Free mobile app
Click to expand...
Click to collapse
Hi.. I connected it to PC for 5 minutes and then tried to boot which doesn't work. I also tried to go to bootloader screen by using the key combination Volume down + power but no luck
nmthewarrior said:
Hi.. I connected it to PC for 5 minutes and then tried to boot which doesn't work. I also tried to go to bootloader screen by using the key combination Volume down + power but no luck
Click to expand...
Click to collapse
better visit service centre
1. First Charge your device to optimum level (50% Minimum).
2. Then Press Vol Down and Hold it, now without releasing it, press and hold Power button too.
3. Now release both the keys.
4. You will enter into fastboot screen.
5. Now you have to connect to PC.
6. Select Recovery.
7. Now motorola logo will be shown, press and hold vol up for 15 seconds and after 15 seconds press Power once.
8. Now you will enter recovery mode, now you can release Vol up key.
9. Now select Factory Reset.
10. After reboot, your device will work without any problem.
I just solved the same problem to my friend's phone!!
Ignore the stupid comments.
ariftwister said:
1. First Charge your device to optimum level (50% Minimum).
2. Then Press Vol Down and Hold it, now without releasing it, press and hold Power button too.
3. Now release both the keys.
4. You will enter into fastboot screen.
5. Now you have to connect to PC.
6. Select Recovery.
7. Now motorola logo will be shown, press and hold vol up for 15 seconds and after 15 seconds press Power once.
8. Now you will enter recovery mode, now you can release Vol up key.
9. Now select Factory Reset.
10. After reboot, your device will work without any problem.
I just solved the same problem to my friend's phone!!
Click to expand...
Click to collapse
Just try to understand what the actual problem is, and stop posting stupid stuff. This has nothing to do with clearing cache, and recovery. How stupid are you people?
Anyway, it just a problem of over discharged battery when the battery drops below the 3.8Volts, which is the minimum voltage. When the battery reaches less than 0%, the phone will not allow it to turn on, as it is harmful for the battery and it might burst. So for security reasons, the phone stops the battery from charging. I faced the same problem many times. Try jump starting the battery anyway, or consider replacing the battery. Go to a electrician , and them him what the problem is. He will fix it. It is advisable, to never let the battery fall below 10 %. Below 0 % , the internal resistance of the battery increases, and sometimes, a direct DC charge , which is above 3.8 V , might bring the battery up to 0 %. This is a very difficult thing to fix.
I am facing the same problem too on my moto g 4 plus after using my power bank(power ace) I used it continuously for 3hours yesterday and i kept charging full night but morning i saw just 54%. In the evening again i used power bank for 3 hours. I didn't find what is the solution!! I charged it for few hours but it is not crossing 15%. I am scare about how to deal. I request the experts to help us.
Moto E 1st Generation
I am not used my phone for the past 2 months since my display broken. My friend also have a Moto E 1st generation phone that phone has software issue hence he didn't used that mobile for 2 months. I decided to change the display from her phone to my phone. Both phone are not used for a last 2 months. I changed the display from my friend's mobile in the nearest service center. After that I tried to charge my phone. when I connecting the charger my LED blinking 3 times but not able to switch on the mobile. I put the phone in the charger for more than 10 hours. still am not able to on my phone. I tried to Hold Power key for 2 minutes then my LED blinks in the Green & yellow color not red color. I don't want to lose my phone. Can you help me from this Issue
---------- Post added at 06:54 AM ---------- Previous post was at 06:51 AM ----------
-Adarsh- said:
clear cache from recovery and try again
Click to expand...
Click to collapse
I am not used my phone for the past 2 months since my display broken. My friend also have a Moto E 1st generation phone that phone has software issue hence he didn't used that mobile for 2 months. I decided to change the display from her phone to my phone. Both phone are not used for a last 2 months. I changed the display from my friend's mobile in the nearest service center. After that I tried to charge my phone. when I connecting the charger my LED blinking 3 times but not able to switch on the mobile. I put the phone in the charger for more than 10 hours. still am not able to on my phone. I tried to Hold Power key for 2 minutes then my LED blinks in the Green & yellow color not red color. I don't want to lose my phone. Can you help me from this Issue
aravindpream said:
I am not used my phone for the past 2 months since my display broken. My friend also have a Moto E 1st generation phone that phone has software issue hence he didn't used that mobile for 2 months. I decided to change the display from her phone to my phone. Both phone are not used for a last 2 months. I changed the display from my friend's mobile in the nearest service center. After that I tried to charge my phone. when I connecting the charger my LED blinking 3 times but not able to switch on the mobile. I put the phone in the charger for more than 10 hours. still am not able to on my phone. I tried to Hold Power key for 2 minutes then my LED blinks in the Green & yellow color not red color. I don't want to lose my phone. Can you help me from this Issue
---------- Post added at 06:54 AM ---------- Previous post was at 06:51 AM ----------
I am not used my phone for the past 2 months since my display broken. My friend also have a Moto E 1st generation phone that phone has software issue hence he didn't used that mobile for 2 months. I decided to change the display from her phone to my phone. Both phone are not used for a last 2 months. I changed the display from my friend's mobile in the nearest service center. After that I tried to charge my phone. when I connecting the charger my LED blinking 3 times but not able to switch on the mobile. I put the phone in the charger for more than 10 hours. still am not able to on my phone. I tried to Hold Power key for 2 minutes then my LED blinks in the Green & yellow color not red color. I don't want to lose my phone. Can you help me from this Issue
Click to expand...
Click to collapse
Don't use moto charger, use any other charger for now
you solved this problem ? here is same problem
This happend with me once, I just let my phone keep charging overnight and it worked the next day, this has nothing to do with cache and recovery, your battery is discharged way too low, it might take 2-3 hours to charge 1 percent
Sent from my Potato 21 years ago
@Mr.pdx and all those of you who still face Moto E issues, check my XDA DevDB project here: Unbrick hard bricked Motorola Moto E - Aravind V. Nair (XDA)
I have a FAQ along with some troubleshooting and unbricking (soft and hard) which might be of help.
I got update to my Moto e 2014 4.4.2 to 4.4.4. I downloaded and when mobile installing this update.... automatically mobile was off.....from that time it is not swtchng on.....just blinking LED when I connect to charger....
Pls give a solution..
After flashed newer firmware of xperia E3 (D2203) by flashtool (bootloader unlocked) my phone goes heat up .
Then i turned off the phone for get normal tempreture
But after some time i trying to turn On the phone but it was no response of power button.
I also try (Vol+) +(power) but its no any sign of vibration. After that I connect to charger but its not showing red led of charging .
only blinking red led 3 times after some minutes
I also try the force power off button but its no responding .
Please ..Please help me to fix this problem
Because sony service centre is not available in my town.
hi
first time getting like this trouble i need some help please
my customer alcatel one touch fire c 4019x wont turn on seem is dead
but when i pick out the battery and plug in the charger the phone bring up for few sec and keep restart ... that mean need a power i think
i set back the battery while the charger already pluged they showing the charging persontage bar and
when holding power button the phone off and didnt turn on again
there is no recovery or downloading mods access
alcatel phones are not sweetable with android
any help please
My tablet model is iwork10 (i15-T). At first, it can be turned on, but there is only windows install. I want dual os (Android & Windows) inside this table, so I try to install the dual os. I started by flashing the bios, but unfortunately after I flashed the bios, it become bricked and wont turn on, even no light when charging or blue light when pressing the power button. It does not give any response. Can anyone help? I will very appreciate for your helping.
tommyvca said:
My tablet model is iwork10 (i15-T). At first, it can be turned on, but there is only windows install. I want dual os (Android & Windows) inside this table, so I try to install the dual os. I started by flashing the bios, but unfortunately after I flashed the bios, it become bricked and wont turn on, even no light when charging or blue light when pressing the power button. It does not give any response. Can anyone help? I will very appreciate for your helping.
Click to expand...
Click to collapse
:good:
I would try opening and checking all cable connections. And, also, cut the red battery wire. Press power button to discharge all components. Leave it one night. Fix the cutted wire, and plug on charger. Wait 10 minutes at least, to charge the battery. Press power button, again and again and keep pressing, it will late a little, and will work. This is how I fixed mine... :fingers-crossed:
Hi everyone so i have a 10.or G mobile,almost a year old.I havent done anything to the mobile-no root not custom roms not even updates.So a month ago the mobile was working perfectly like s new one ,but all of sudden the mobile turned off.At that time the battery was also pretty low around 15% so i thought that power was low and started charging it.
After an hour when i switch on the mobile it was blank.So after pressing the power button for a minute it powered on(normally pressing the button for 5 sec would power on)
but while powering on it would load till the 10.or logo halfway and then get stuck for around 3 seconds and then powers off.No matter how many times you power on the same thing happens.
So it loads till the logo,gets stuck,and shuts down again
But we can open recovery mode by pressing the volume up and power button
P.S:It is a non removable battery model
So please help me with what could have happened to the mobile
Also the official website has released the official kernal source code at
10or . com
So please help me with solving this issue