Hi
Ok, So I have this generic local branded 10.1" tablet. When it was working, i installed cpu z on it for info. The chipset showed up as rk3066.....however when I had opened the tablet, the writing on the main chip was rk3188..... up until then I had been searching for rk3066 roms with the screen resolution of 1280x800 and quad core which I was unable to find seeing as all the 3066 roms I came across were for dual core and with a lower resolution.
So I then searched for rk3188 roms, found many which matched the screen resolution and being quad core. Used rkbatch tools to flash many firmwares, all of which failed, they flash successfully but the tablet just stays on a black screen. After a while I tried a 3066 rom just to see if it worked.....it didn't even get to the flashing part coz it failed to match the chip when the device was connected.
Is there anyone out there that can help me with a stock rom for this tablet. I also have a cwm backup for it
Related
Hello people,
My tablet is supposedly an import from China with the manufacturing name as Chuwi v7 nuclear and rebranded in our country by a company named Milagrow as TabTop 7.16. It has the following specs:
1.2 GHz, ARM Cortex A8
512 DDR3
Dual Mali - 400 MP[/QUOTE]
My problem is that I successfully rooted the tablet. And I haven't touched the firmware yet. Since the stock rom wasn't good enough, I went ahead with attempting to find a suitable CWM (Clockworkmod recovery). Turns I couldn't find a compatible version with my tablet, but I went ahead and tried some others. In this processes I flashed an incorrect CWM, the tablet is now stuck at the android boot logo.
Any pointers on how I could fix this?
Good day
Common guys. I need your help :crying:
Flash Stock..
sabergeek said:
Hello people,
My tablet is supposedly an import from China with the manufacturing name as Chuwi v7 nuclear and rebranded in our country by a company named Milagrow as TabTop 7.16. It has the following specs:
1.2 GHz, ARM Cortex A8
512 DDR3
Dual Mali - 400 MP
Click to expand...
Click to collapse
My problem is that I successfully rooted the tablet. And I haven't touched the firmware yet. Since the stock rom wasn't good enough, I went ahead with attempting to find a suitable CWM (Clockworkmod recovery). Turns I couldn't find a compatible version with my tablet, but I went ahead and tried some others. In this processes I flashed an incorrect CWM, the tablet is now stuck at the android boot logo.
Any pointers on how I could fix this?
Good day [/QUOTE]
I don't know about this tablet but try to find / download stock firmware and install it i thing via odin .. should fix your issue , worked for me on other tablet
I suppose It get solved if PC detects your device .I mean ADB detects.Then try other cwm recovery versions.
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
same problem sansui etab 801 vp
curlyjoe123 said:
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
Click to expand...
Click to collapse
Hi,
I am now facing same problem withmy tablet sansui and I can't find a way to solve it.
Some of my friend recommended to use UBEROID but Iha ve my douts about it.
Did you found a solution?
Dear fellow members. I'm exhausted trying to find my tablet ROM. I hope someone can give me a hand, thanks beforehand -
my tablet is 7 "(1024x600) ALPS brand, m874 model MTK6582 Cortex A7 CPU dual core (according Z-CPU when the tablet was walking) but the physical chip on the motherboard is a MT8312v, Mali 400 GPU, 1GB of RAM, 8GB ROM, Dual Sim 3G.
Printed in the mother says M874MB v1.3 A
I tried to flash with flash tool SP but get errors 4008 and 4010).
Apparently not match the addresses of the user data partitions in emmc.
Try several roms that claim to be for 874, but nothing. The tablet PC recognizes the COM port, makes the red bar and stays there for a while and jump mistake minute 4010 or 4008
If anyone can help or offer any proof is appreciated.
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
I've got mine stacked to MEDIATECK LOGO and.........
Skelmy said:
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
Click to expand...
Click to collapse
Hi! I've got mine stacked to MEDIATEK LOGO!. I try to connect it to my PC (Win 7) but the driver installs but when I connect the tablet with the usb cable it connects at first and disconnects imediately!.. So I CANNOT USE ANY IMAGE PROGRAMME!. What is the steps you did to connect it to your pc?.
Thanks!
Skelmy said:
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
Click to expand...
Click to collapse
Hey, sorry for the long reply. I haven't been on here in years. I cannot remember now. I sent the tablet back in the end, as he gave me the file to flash to the tablet. I just got my money back, he gave me the file and the instructions on what to do, from the actual manufacturer in China, and this happened. So they are not good.
Currently looking for anything other than M-Rom for a Sony Xperia Z3+ Dual (Z4 in Japan rest of the world Z3+, very odd thing for Sony to do).
Regards
About a year back I bought this tablet second-hand, No box, no cords, no manual, nothing.
All I have to go on is what is written on the backcase and inside the actual tablet.
The thing is that this specific model seem to be spoken of very lightly on the internet and there's been alot of missinformation regarding the actual model name, the CPU and the kernel...
Long story short, I misstook my tablet for the "momo11 Bird" and downloaded CM10 from this link http://forum.xda-developers.com/showthread.php?t=1821398
I flashed it, and as you can figure out, seeing I misstakenly downloaded a ROM for Rockchip when in reality I'm on a Allwinner A31s, I accidently bricked my device.
The key combination for recovery or fastboot does no longer work, and as I turn the tablet on it just shows the "ployer" logo and stays there.
It doesn't even reboot itself, it just shows the logo until the battery is dead.
After digging on the internet for what feels like forever, I now am almost entirely certain that I have successfully found the ACTUAL model in my possession.
Most important specs:
Product Type Tablet PC
Brand Ployer
Model MOMO11-III
Color Silver back cover
Shell Material Aluminum alloy
Operating System Stock Android 4.2 (Currently CM10 for momo11 Bird)
CPU Allwinner A31S Cortex-A7 quad-core 1.2GHz
GPU PowerVR SGX544 MP2
RAM 1GB DDR3
ROM (Nand Flash) 8GB
Now, in a desperate attempt to restore my tablet, I'm trying to locate either a stock firmware or a custom one, I don't really care aslong as it works.
The problem is that like previously mentioned, there's not alot of information regarding the "ployer momo11 iii"(momo11-3), and I have also not yet managed to find a ROM for it.
Another issue that I'm also faced with is that I can't seem to get my hands on any USB drivers for the tablet.
Is there anyone here who's got any experience with this tablet, or could help find the proper firmware, respectively the proper USB driver?
Someone please help as this is making me really sad....