This is a new issue, it used to work fine, but now, whenever I plug a USB cable into my phone and PC, nothing happens on the PC(No usb found sound) and the phone just shows that it is charging. I opened Device Manager and plugged the phone in and it did not refresh or find anything new. No Unknown Devices in DM either. Currently I am working with a Windows 7 x86 laptop.
Things I have tried:
-Different PC
-Different USB cable
-Factory Reset
-Uninstall/reinstalled HTC drivers
I dont know what the issue is, do I have a bad USB port? Any suggestions?
same problem
bump
So the ota screwed up my phone. I was able to connect and intstall the stock eoh3 for xda the phone now starts up but I am unable to connect USB to root or flash any new rooms with Odin I can only connect Odin if the phone is booted up and debug and mock locations are on. If I pull the battery and put it in download mode it will not connect to the pc it just shows as an unknown device. I have reloaded drivers ect but not getting anywhere. Any ideas?
Try another cable if you have one, and try putting the drivers on another PC. For reasons I still haven't figured out, my home desktop PC quit connecting a couple of ROM's ago, and it won't even let me reinstall the drivers. I have a laptop that works fine (so I haven't gone into major troubleshooting) and my work PC also connects fine.
If the same issue repeats on other PC's and cables, there may be something wrong with your mini USB port. I had to have mine replaced a few months back.
Hi, i have a THL5000 with the following problem: usb connection to PC’s doesn’t work.
Although, charging from USB port works and USB OTG works.
But for some reason connecting the phone via usb cable to the pc won’t recognise the phone…
A sort history of phone mods and things I have done…
1. USB connection to pc worked fine with the original stock rom.
2. I rooted the phone with SP Flash Tools and installed a custom recovery and rom, again the USB connection to the PC worked just fine and everything else worked.
3. Afterwards I wanted to return to stock rom so I used SP Flash Tools and selected the option “Format All + Download”… everything went just fine, but when the phone rebooted the IMEI info were gone (rom working fine) and also I couldn’t connect via USB cable no more!
Charging the phone and USB OTG works fine, but I have tried connecting the phone to varius pc with varius os (linux, windows XP/Vista/7/10) but no PC recognizes the phone…
I have also tried downloading Android phone drivers to the PC’s but nothing, tried different usb cables and usb ports but nothing…
I have also tried using SP Flash Tools again but the pc doesn’t recognizes the phone so I’m stuck.
Any suggestions in fixing the mess I have made???
Hi,
maybe one of the experts can help...
I have a LEMAX2 with X820_20S_ROW_CUOCO92 ROM.
Since half a year or so the USB-Connection to the PC does not work anymore. Tried several cables and several PCs, no change.
I can boot the phone in RECOVRY Mode, but it It shuts itself off immediately.
I can enter fastboot mode, but the phone is still not recognized by the PC.
When I connect the phone via MyPhoneExplorerClient, WLAN works, but MyPhoneExplorerClient says 'USB-Cabel 'Not conneced.'
When I unplug and re-plug the USB-Cable, for a short time MyPhoneExplorerClient says 'USB-Cabel 'conneced', but no setting option for USB configuration can be found and after a second or so MyPhoneExplorerClient shows 'USB-Cabel Not conneced' again.
I tried to find out how to change or repair the firmware but all howtos require a USB Connection.
Mayby I accidentaly removed some system software responsible for the USB Connection?
Any idea?
:crying:TWSMS
Hi all,
I tried to flash the latest TWRP but for some reasons it's messed up. Now I can't enter recovery mode and just wondering if there is a way to re-install it.
I tried to do it via Fastboot mode but my PC(windows 10) can't recognize the phone when in Fastboot mode. I tried several ways(e.g. reinstall USB driver, remove / install driver via device manager, etc.) but no luck.
Any help/suggestion is appreciated.
Try with the original cable. It will work for sure. I had almost the same issue, tried various drivers, etc. Once I've connected the phone with its original cable, it was recognized instantly.
Strange, other people say, the original cable is bad quality??
I would use a different cable but an usb port on the mainboard no a front usb port.
Also i do all the adb und fastboot stuff on a linux machine, it's less struggeling with drivers then.
The original cable still works though, I'm not so sure what bad quality can that be... And yes, I haven't used it in these 3 years more than half of the time. In the past year I was using a 3m Ugreen cable which didn't do the trick for drivers, still working well.
However, with some changes in the kernel or whatsoever, the original cable doesn't charge the phone anymore while connected to the computer, but it ensures a good data transfer.
PS: USB type-C is more complex and not standardized for all manufacturers, which is a bit surprising, but that's it.
eqt2010 said:
Hi all,
I tried to flash the latest TWRP but for some reasons it's messed up. Now I can't enter recovery mode and just wondering if there is a way to re-install it.
I tried to do it via Fastboot mode but my PC(windows 10) can't recognize the phone when in Fastboot mode. I tried several ways(e.g. reinstall USB driver, remove / install driver via device manager, etc.) but no luck.
Any help/suggestion is appreciated.
Click to expand...
Click to collapse
you need to format whole phone in oder to be recognized by pc.try first deleting all drivers for x2.go to windows in device manager,reboot pc and reconnect phone to pc by using usb type c cable
thank you for all the recommendations. I will try original cable and other PC using Linux and see if that works.
Update: My windows 10 PC installed the wrong driver when phone is in fastboot mode. Working fine now after deleting it from Device Manager and reinstalling.