My S6 edge takes around 6-7 hours to charge. When connected to the fast charger it only says its cable charging..................... Now I have changed cables, enabled USB debugging, checked the power brick but its the same one I use for the S7 edge and it works fine on my S7 but not S6. Its possibly due to software however i'm unable to change the software as my PC doesn't detect the phone. I have smart switch, kies etc installed and still no connectivity to the s6 edge but the PC reads my S7 edge fine. Tried an ADB update but that still didnt detect my phone. Does anyone know what else I can try ???
Hi, did you fix it?? I have the same problem with my S6 flat...
Xusko17 said:
Hi, did you fix it?? I have the same problem with my S6 flat...
Click to expand...
Click to collapse
May be related to the charging system
Related
For some reason my phone will not connect to my computer through my USB. I have tried everything and my debugging is on as well. yet still it does not connect. It charges the battery very slowly with USB, much faster with wireless charging. Adaptive fast charging does not work either.
No contact even with Odin via download mode. Have all the drivers and have tried different USB cords.
When you do not make contact with Odin, is it the hardware that is broken?
Have tried different roms in my phone.
boffi said:
For some reason my phone will not connect to my computer through my USB. I have tried everything and my debugging is on as well. yet still it does not connect. It charges the battery very slowly with USB, much faster with wireless charging. Adaptive fast charging does not work either.
No contact even with Odin via download mode. Have all the drivers and have tried different USB cords.
When you do not make contact with Odin, is it the hardware that is broken?
Have tried different roms in my phone.
Click to expand...
Click to collapse
I think it might be the USB port on the computer. I know my computer often has difficulty keeping a connection, even when I use a different cord.
Snowby123 said:
I think it might be the USB port on the computer. I know my computer often has difficulty keeping a connection, even when I use a different cord.
Click to expand...
Click to collapse
no, I have tried different phones and computers.
it's just my Galaxy S6 Edge that does not make contact.
boffi said:
no, I have tried different phones and computers.
it's just my Galaxy S6 Edge that does not make contact.
Click to expand...
Click to collapse
Another user posted a thread similar to yours.
Try reading through it.
http://forum.xda-developers.com/galaxy-s6/help/pc-connection-t3183818
boffi said:
For some reason my phone will not connect to my computer through my USB. I have tried everything and my debugging is on as well. yet still it does not connect. It charges the battery very slowly with USB, much faster with wireless charging. Adaptive fast charging does not work either.
No contact even with Odin via download mode. Have all the drivers and have tried different USB cords.
When you do not make contact with Odin, is it the hardware that is broken?
Have tried different roms in my phone.
Click to expand...
Click to collapse
hi dear .you still facing this problem or you been able to resolve this issue... i am facing exactly same problem on s6 edge..... try many thinks but no success...
very slow charging
not connected to computer
not connect with odin in download mode
not connecting on ADB mode
reactivation lock also not removed from phone...
not accepting any code from dial pad
.....................
plz help me if someone have soloution of this.......
Buy new cable because original samsung are defective. They work ok when charging, but usb data transfer is a hell. With new cable it works perfect but I am so disappointed with samsung. We have 2 s6 edge (32 and 64gb versions) in house with same cable issue ( I previously owned 3 S tabs and galaxy s, s2, s3 mini, s4, s5 mini and now s6 edge)...This is really really disappointing from Samsung. After S2 they started making lousy mobiles (s4 was ok)........Will not buy Samsung again!!!
Hi guys, I am getting an error on My Galaxy S7 Edge. This is the a "Moisture Detected Error". The error occurs when I plug my phone to the my car charger. Please notice that I only get this error with my car charger. I can plug my phone to my computer or any other USB charger and everything goes fine with no error. I bought another car charger and I still get the same error. Also even though this model is waterproof, I have never wet this phone. Do you guys have an idea on how to solve this problem? Thanks!
Would it be that these phones use other specific car chargers?
Anybody with the same problem?
AT&T S7 Moisture Problem
i'm having the same problem with my S7. the "moisture detected" problem only occurs when i'm using my car charger. i have 2 Motorola car chargers and they both have started giving me this error message. Any ideas on how to fix?
phone: Galaxy S7 - non rooted
provider T-Mobile
Just weighing in here as I also get the moisture error. I normally use blackberry cables to charge android phones as I find them to be of higher quality than the crap cable that normally comes with the phone, plugged into the samsung charger of course. Ever since tmobile pushed out android 8 to my phone I started getting this. Now let me state this very clearly:
THERE IS NO MOISTURE, ON OR IN MY PHONE.
This only started a week after the update. The only thing I have found to work is to use the samsung provided cable and charger. If I use a Samsung charger with a blackberry cable, the warning is triggered. I have tried clearing data and cache from the system app Usbsettings and then restarting. This did nothing. I also used a can of air. This did nothing. The only thing that works is using Samsung's cable and charger.
Update: Tried it again just now with non samsung cable and charger and I don't get the moisture error. Still no moisture on or in my phone. Weird.
Hello everyone,
I am having a problem with my phone for the past 6 months...
I own an S6 Edge and suddently stopped charging from usb ( not at all, it only charges at usb mode, sth like 200-400ma, when the charger is the official Samsung fast charger) plus any pc doesn't recognize my device (pops u a message like unknown device).
I didn't encounter any problem with the phone before those 6 months. I tried factory resets, dalvik cache wipes, safe mode also doesn't work, tried different charger-cable combination, plus I borrowed a new wall adapter and cable and still got the same results.
Is there anything else I can try except taking the phone apart and try replacing the usb module?
Thanks a lot !
pr3d4t0r1993 said:
Hello everyone,
I am having a problem with my phone for the past 6 months...
I own an S6 Edge and suddently stopped charging from usb ( not at all, it only charges at usb mode, sth like 200-400ma, when the charger is the official Samsung fast charger) plus any pc doesn't recognize my device (pops u a message like unknown device).
I didn't encounter any problem with the phone before those 6 months. I tried factory resets, dalvik cache wipes, safe mode also doesn't work, tried different charger-cable combination, plus I borrowed a new wall adapter and cable and still got the same results.
Is there anything else I can try except taking the phone apart and try replacing the usb module?
Thanks a lot !
Click to expand...
Click to collapse
Change the usb port I would say. Strange that the pc isn't recognising it though
Hi all! Tried searching for an answer to this but couldn't see it. I currently own a Galaxy S8 and I normally charge it overnight via a USB cable from my laptop while it is off, as the USB still delivers power to the phone even when it is turned off. Using the same cable+laptop+port as before, this does not seem to work for the Galaxy S21 that I have recently been given - it starts the charging process but then stops after 3 seconds or so. Does anyone know why this might be the case? I have not changed any configurations within Windows/BIOS at all. The S8 still charges fine via the same cable. Is there a setting in the phone I need to change? Thanks in advance!
Try changing the USB cable to an emarked cable. It may not want to charge because the cable is missing the chip.
Hello, I own Galaxy Tab S6 WIFI, with android 12. I had some problems with connection via usbc-hdmi cable before. I had to plug the usbc at first, and secondly had to plug the hdmi into external monitor. This was the only way, how to make my tab s6 start dex with ext. monitor. But now, I am not able to connect the monitor at all. The tablet's just keep saying "USB connected"/"USB disconnected" over and over.
This message appears only if I try to connect external monitor.
Charging and data transfering are without problems.
If I try to connect S21 (exynos) with the same cable and same external monitor, the connection is established immediately.
Any ideas how to fix it?
PS: If I selected wrong thread, I am sorry. In that case I will delete this post.
Arobase40 said:
Don't have such a problem with mine.
Just ordered and received today new adaptor USB-C to HDMI plus 2 m HDMI cable and I plugged my Galaxy tab S6 to an external monitor and I don't have such a problem as DEX appears immediately.
Edit : Forgot to say I also own a USB-C hub with 3 USB type A slot, 1 USB-C slot, with HDMI and VGA slots, Ethernet 1 GB so I could plug a mouse and and a keyboard and there are also working fine with my Galaxy Tab S6 DEX.
I also have an old Galaxy Note 9 and I can do wireless DEX with my external monitor with a Amazon FireTV Stick in pushing the DEX option from drop down "menu" but wireless DEX won't work with my Galaxy Tab S6.
Could probably be fixed with a next update...
For what I know wireless DEX is also working with a Galaxy Tab S7 and/or Tab S7+....
Click to expand...
Click to collapse
Thanks, does DeX work with hub connected to tablet? And does the hub charging your TS6 simultaneously?
That is my second problem, I am looking for a hub, that might charge tablet via USBC and share the screen at the same time. Any suggestions?
Thank you.
Johny_Wo said:
Hello, I own Galaxy Tab S6 WIFI, with android 12. I had some problems with connection via usbc-hdmi cable before. I had to plug the usbc at first, and secondly had to plug the hdmi into external monitor. This was the only way, how to make my tab s6 start dex with ext. monitor. But now, I am not able to connect the monitor at all. The tablet's just keep saying "USB connected"/"USB disconnected" over and over.
This message appears only if I try to connect external monitor.
Charging and data transfering are without problems.
If I try to connect S21 (exynos) with the same cable and same external monitor, the connection is established immediately.
Any ideas how to fix it?
PS: If I selected wrong thread, I am sorry. In that case I will delete this post.
Click to expand...
Click to collapse
Unfortunately, that is due to the port being USB 2.0, not 3.0. The S6 Lite's USB C port literally doesn't have enough bandwidth to transfer video over cable.
The S21 however has a much higher bandwidth USB 3.0 port that can.
All you can do is wirelessly stream Dex/Smartview over Wifi
FloLeef said:
Unfortunately, that is due to the port being USB 2.0, not 3.0. The S6 Lite's USB C port literally doesn't have enough bandwidth to transfer video over cable.
The S21 however has a much higher bandwidth USB 3.0 port that can.
All you can do is wirelessly stream Dex/Smartview over Wifi
Click to expand...
Click to collapse
Hi, thank you for your answer. But i have Tab S6, not the LITE version.
I am successfully using this HDMI adaptor on my S6 which allows charging at the same time (sorry for the UK Amazon link) - https://www.amazon.co.uk/gp/product/B07Z8XYLKS
Johny_Wo said:
Hi, thank you for your answer. But i have Tab S6, not the LITE version.
Click to expand...
Click to collapse
I have a hdmi adapter and my Tab S6 wont output any video without it being charged at the same time. If it is connected to a charger it works perfectly fine
Pinguin2001 said:
I have a hdmi adapter and my Tab S6 wont output any video without it being charged at the same time. If it is connected to a charger it works perfectly fine
Click to expand...
Click to collapse
Hi, which hub do u use? ty
Johny_Wo said:
Hi, which hub do u use? ty
Click to expand...
Click to collapse
Sure, https://uniaccessories.com/products/usb-c-3-in-1-hub-30hz-60hz