TPU case - little review with photos - OnePlus 5 Accessories

I bought 3 pcs of these back cover from official Aliexpress daTTap Official Store. The deal was paid 30. 6. 2017 and today 27.6.2017 was delivered at the morning.
Simple case
2pcs are the same with different color. This cases fits good but not perfectly. Problem is around the camera. As you can see on photos top side of camera is covered. I was try make some photos with case on and no problem.
Simple case with hole
Third case is the best of them. No problem with covering some part of phones. Enought space around the DND switch. It looks like hard case, but not.
Good for this price. I recommend case with hole. Better material and good fits to hand. If you need more photos, reply
Photos on G-Photos

Thank you for your review.
I got the original Bumper Case. It is great except it doesn't protect the camera that much. It is right in line with the back cover. Laying it on it's back on a table, the camera glass touches the table as much as the cover.

Thanks for sharing! Love all the case reviews from you guys

Related

My review of the Sikai leather case

Hi all,
Here is my review of the Sikai leather/plastic case, as sold by Amazon. For comparison, I have had my Prime in the Poetic cover since I got it. It was okay, but didn't have a charging slot in the spine so it had to be open to be plugged in - plus the nearly-flat angle was nearly-useless because the cover kept slipping out of the tab you tucked it into. I had ordered the GreatShield folio case, but returned it because I didn't like the way the case gripped the tablet, plus I didn't like that to close the cover I had to put pressure on the screen to slide the clip past the edge.
Onto my review...
As mentioned in other reviews, it is a strange mix of black leatherette and dark brown plastic. The plastic back plate is great - the Prime snaps in and seems to be held quite securely. Similar to many iPad covers, it just wraps over the edge - enough to hold, but out-of-the-way enough to really reveal the sleek Prime look. The main portion of the back plate is the black leatherette material, with only the outer edge showing the brown plastic. It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
The leather-ish cover looks to be two pieces glued/sewn together, with two bends in the midde - allowing it to be folded up in a triangle shape. Both angles I tried seem to be reasonably stable while typing. About the two layers of the cover...they might have been able to get away with only one, giving it a sleeker appearance, but they had to account for the strap that slips over the sides to hold the cover against the screen. The strap is fine, and gives it an upscale look, but I would have preferred a more unobtrusive solution with magnets or something similar. Overall, the case is skinny enough - just about the same thickness as my Poetic case. That is actually a bit of a downer since I expected this to be thinner since the Poetic case has that layer around the bezel with the magnets in the corners.
There are a few tiny fit-and-finish things that I didn't expect to see in a $30 case. The leather part of the back plate doesn't always make a perfect fit with the plastic border. I'm really nitpicking here, but when this costs three times as much as my Poetic case, I was expecting Ferrarri-quality stuff. I know - it still only $30 so I won't beat them up (much) for it.
Overall, I really like the Sikai. It has a superior look to the Poetic - that one hid all of the nice features of the Prime underneath the protective layers of the front/back/cover. When all that is exposed is the center part of the screen, it almost doesn't matter anymore what Asus designed it to look like. The Sikai shows the Prime's lines and curves much better than the other cases I have seen. The plastic seems tough enough to not break or wear any time soon, so as long as the leatherette holds up, I say this is the best case available for the Prime under $30...
By the way, when ordering from Amazon, it ships from Hong Kong. I placed the order on June 18th, and got a confirmation within 24 hours that it had shipped. However, the confirmation email said my ETA was JULY 31st! Needless to say, I was very happy when it arrived today instead...
I figured there were already better pictures available than my crappy phone can provide, but I can take some close-ups of specific features if requested.
Thanks!
swordsman74 said:
It has all of the necessary cutouts - including (apparently) the ability to have the dock attached and still close the cover. That is because the "hinge" pieces that connect the cover to the back plate are elastic. I don't have a dock, so I can't comment much on that.
Click to expand...
Click to collapse
The dock works great with this case!
yeah I've had this case for a few weeks and its very functional. I really like how it doesn't cover the bezel on the prime like the sikai fiber case and you get multiple angles that actually work
My only complaints are that its a bit on the heavy side and because its designed to be put into the dock with the case on, the steepest angle isn't quite as steep as other cases because the flap slides out making the "hinge" not at the fold but an inch out
oh and the case is kind of ugly haha

Orzly wallet case - Review - Ask me anything!

Hey guys!
So my orzly stuff is starting to arrive in bulk now, ordered a lot of their cases while they were on presale as the other companies didn't have anything up yet!
My latest case to arrive from them is the wallet case. I had this case for my OP3 last year, and used it for about a week before I decided it wasn't for me. Flip cases just weren't really my thing, besides their use as a stand! I decided to get this one again and see if they changed anything!
First things first, the case feels like real leather, but it also feels like faux leather, but either way it still feels nice which is the main thing. I got the black colour of the wallet case. On the front on the case, there is the magnetic strap, which is very strong so you shouldn't worry about the case opening accidently The only other thing at the front is in the bottom right of the case, which is the 'Orzly' branding, which isn't too intrusive at all!
Next, around the back, all you can see if a hole for the camera. The camera is protected by the case and the camera will not touch any surfaces if you have the case on
Inside, on the left, is the wallet section. There is slots for cards and a pocket for money aswell, which is useful for some people, and not useful for others. On the right hand side is where the phone would sit. It is a different design then last years case. Last year, the phone used to kind of clip in to the case which was very awkward. This year, it is more like an actual flexicase inside of the wallet case, which is a much better design, and makes the phone a lot easier to take in and out of the wallet case!
The case also turns into a stand, which is one of the main reasons why I would use it. It is very useful if you want to watch videos on your phone, or need to show somebody something. Just flip the case into a triangle at the back and boom, you have a stand!
Overall, I prefer the case then last years walelt case. I still do not believe wallet cases are for me, as I like having quick access to my phone, but I do love the fact that it protects your phones screen without the need of a screen protector, and it can become a stand! I've attached some pictures of the case in the imgur link below, and if you are interested in buying the case follow this link!
http://imgur.com/a/QCNWv
Dark

Any case that better protect the Camera?

Are there any case in the wild that offers better protection around the camera? Currently using the TPU case that came in the box and while I like it, i am not able to place the phone on a flat surface as I believe the edges of the camera is exposed and would like to keep that from scratches and damages. If anyone has or knows of a case which better protects the camera, I ll be interested.
Thanks in advance.
not yet, got the spigen Rugged Armor, the lens is too flush with the case. a drop on the back and the lens will crack
I was thinking the same thing. The lens sticks out at the back and the case that comes with the phone just sits flush with this. I'm concerned about just lying the phone on to the table with the lens rubbing on something and getting scratched
Interested to see what other people are going with. For now i'm using the in box clear case. Mobilefun seem to be the only place (UK) that have some options. Olixar brand have a few options but without reviews it's hard to tell how they'll fit. I know many case manufactures design cases before phones are released and working from a phone size spec doesn't always result in a good fitting case. Many of the case stock photo's i've seen have a mock P20 pro with a flat camera such as this one https://www.amazon.co.uk/Flexible-A...8&qid=1523214240&sr=8-7&keywords=p20+pro+case As previous posts have mentioned ideally I want the case to protect the protruding camera while still be slim.
got the Olixar FlexiShield from amazom too https://www.amazon.co.uk/gp/product/B07BL27WMJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
sent it back, a bit better than the huawei case, there is a lip around the camera, but its very minimal, about half millimeter, so as long as you palce the phone on a flat surface you should be ok, but not if dropped and the overall protection is very bad too, screen is pretty much unprotected,
I've got this one arriving tomorrow. From the photos it looks like it should have good camera protection.
I found a few interesting cases on eBay. It'll be a week or two before they arrive. They're cheap and look like they offer better protection for the camera. I'll save spending big bucks for when something reliable shows up
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/112914026578
landerson07 said:
I've got this one arriving tomorrow. From the photos it looks like it should have good camera protection.
Click to expand...
Click to collapse
some pics would be great
I Ordered the Rugged Spigen Case and some Outdoor Case when i Ride with the Bike... arktis.de/arktispro-huawei-p20-pro-outdoor-armor-case-silber (Delivery 17.04.)
landerson07 said:
I've got this one arriving tomorrow. From the photos it looks like it should have good camera protection.
Click to expand...
Click to collapse
I'd be a bit concerned with that one, the images are clearly mock-ups as they show all 3 cameras flush with the phone's rear which obviously isn't the case with this phone.
It arrived today and protection is good. Great fit, good grip, easy press buttons, good cut outs for speakers etc, nice lip to protect the screen and the rear lens is not quite flush so doesn't touch when placed back down on a table etc.
Bargain for the price and I'm very happy
I just got this case. I think AliExpress selling it for few USD... The camera lens is only slightly lower but will do for the time being while hunting for a better one like uag.
landerson07 said:
It arrived today and protection is good. Great fit, good grip, easy press buttons, good cut outs for speakers etc, nice lip to protect the screen and the rear lens is not quite flush so doesn't touch when placed back down on a table etc.
Bargain for the price and I'm very happy
Click to expand...
Click to collapse
can also confirm this, much better than the spigen rugged armour
landerson07 said:
It arrived today and protection is good. Great fit, good grip, easy press buttons, good cut outs for speakers etc, nice lip to protect the screen and the rear lens is not quite flush so doesn't touch when placed back down on a table etc.
Bargain for the price and I'm very happy
Click to expand...
Click to collapse
Yeh I randomly ordered it as I didn't realise there was going to be a case inside the box. However am glad I did as its pretty sturdy and will absorb some of the impact. Also like how the gaps are not too large against the ports.
Usually i bought Spigen thin fit for all my phones, but, until now, they don't have for p20 pro.
I´m looking for something light and thin.
I bought some tempered glass protectors for the three lenses on aliexpress but they haven't arrived yet. Will post an update after I try them.
Vogal said:
Usually i bought Spigen thin fit for all my phones, but, until now, they don't have for p20 pro.
I´m looking for something light and thin.
Click to expand...
Click to collapse
I received this one today and tbh it seems pretty good, nice fit and protects the lenses nicely round the back, only negative would be it doesn't have raised sides to protect the screen when face down
Anccer Huawei P20 Pro Case [Serie Matte] Resilient Shock Absorption and Ultra Thin Design Cover (Smooth Black) https://www.amazon.com/dp/B07BPGHDJS?ref=yo_pop_ma_swf
I'm currently using the case that came with the phone, but I'm after the smart view case (have it on my Mate 10 Pro) and also after a screen protector as unlike the Mate 10 Pro, you don't get one
I received my MOFI hard case and while it fits beautifully , it offers 0 protection for the dual cameras they are flush with the case. i also grabbed the MOFO full screen tempered glass and that also fit great but has left a "oil slick" look to the middle of the screen, i'm hoping this goes away after a few day. But if not i would shy away fro the MOFI stuff. ill post up if the screen spot goes away.
I'm looking for a slim case with holes for a lanyard/wrist cord.
Any suggestions?
Thanks

Spigen Rugged Armor for Huawei P20 Pro - Review

Spigen has been my go to case maker for the last 5 years and once again I was not dissapointed with the quality. The case is a perfect fit for my Huawei P20 Pro and looks stylish. All buttons and ports are easily accessible (there are cutouts for cameras, speakers, USB C port, IR blaster and microphone). The case doesn't add too much bulk and the buttons are easy to press. There is a lip on the front surrounding the display that should protect it from drops face down.Would definitely recommend. The camera on the back doesn't stick out and the phone lies flat on the table.
For 9.99£ it's a bargain imo. Link to Amazon.
I've decided to live dangerously with this phone, I've ordered a KitBag from Amazon and will have no case or screen protector on it, unless a DECENT full coverage one comes along
I got the same thing but unbranded for £3.99 on ebay. literally exactly the same.
jaju123 said:
I got the same thing but unbranded for £3.99 on ebay. literally exactly the same.
Click to expand...
Click to collapse
Would you happen to have a link and some photos of the one you found?
shem2409 said:
Spigen has been my go to case maker for the last 5 years and once again I was not dissapointed with the quality. The case is a perfect fit for my Huawei P20 Pro and looks stylish. All buttons and ports are easily accessible (there are cutouts for cameras, speakers, USB C port, IR blaster and microphone). The case doesn't add too much bulk and the buttons are easy to press. There is a lip on the front surrounding the display that should protect it from drops face down.Would definitely recommend. The camera on the back doesn't stick out and the phone lies flat on the table.
For 9.99£ it's a bargain imo. Link to Amazon.
Click to expand...
Click to collapse
Thank you for posting this review. I was about to buy one too but was concerned If any of the camera bump stuck out or was nicely tucked in. Spigen rugged armour is the best phone case I've ever had. incredible shock protection yet doesn't scratch funny enough. They clean up great and look new throughout (or at least mine does).
Damn, just got this case. Really slick, I'm a little worried about the camera it's rather flush but better than nothing haha
Gravol said:
Damn, just got this case. Really slick, I'm a little worried about the camera it's rather flush but better than nothing haha
Click to expand...
Click to collapse
Try the Slim Armor, gives a good 2mm or so protection to the camera
nibs777 said:
Try the Slim Armor, gives a good 2mm or so protection to the camera
Click to expand...
Click to collapse
I can vouch for the Slim Armor case. Just picked up a P20 Pro yesterday and Spigen was my go-to brand and it's really nice and not super bulky.
The rugged armor is good but the glass screen cover that Spiegen offers is crap! I've had it on the phone for 2 days, just took it out of my pocket and theres a crack right across the screen cover! This is with the Rugged Armor on the phone too, so theres a nice big lip above the screen cover to protect the edges. Nothing else in my pockets either, I'm very careful with my phones.
I have to disagree with the above ref the Spigen screen protector, I have had one on for 3 weeks and am really impressed with it. My phone has been with me everywhere in that time and has taken a couple of drops and knocks and the cover is holding up really well, also it looks and feels far better than the others I have tried. I'm using with the Slim Armor and together it's very well protected
I'd be surprised if the screen protector just magically broke on it's own. Probably just took some minor impact at a fateful angle. Maybe ask Spigen for a warranty and see what happens.
I returned my spiegen tough armour because of the lack of camera protection.
went with this instead... purchased 3 of them(different colors)
great case with camera protection
Dooqi Huawei P20/P20 Pro/P20 Lite Ring Stand Holder Shockproof Rugged Case Cover
I got the Spigen case before I picked up the P20 Pro. Never had an issue with it; I even stuck an iRing to the back of the case so that it gives me some added security if I somehow lose grip of the case.
It's true that the camera hump is close to the plastic spigen back. But it is enough to protect the camera. There is no doubt that it could be better. Spigen have recognised this and brought out a new case. See the spigen website
Anime had experience with Mark Armor Case from Spigen?

Flip cases for the 6T

Hey everyone,
Since I typically use a flip case (a regular case with a protective cover for the screen that flips open) with all the phones I've owned, I thought I'd open a thread to start a discussion about people's experiences and recommendations with flip cases for the 6T.
Share something and help someone with what product to use!
Reserved
I'm currently using this one:
Foluu Compatible OnePlus 6T Case,... https://www.amazon.com/dp/B07K2S5DFC?ref=yo_pop_ma_swf
Pros:
+ magnetic edge on flip cover afixes the flip cover to the back, neatly preventing flapping
+ the sides of the phone are completely covered by a transparent bumper, with cutouts only for usb, alert slider, and speakers
+ relatively screen protector friendly
Cons:
- not a smart cover
- back cover is not a single piece with the sides, adding to bulk
Again, the pro/con list reflects my personal preferences and of course, may not apply at all to you.
Orzly Wallet Flip Case looks decent enough. I am currently using the oneplus 6t flip case with card slot, and its okay. Doesnt flap much, but it does not compare to my last otterbox strada case for the iphone 8 plus. Still looking for something similar.
I've also purchased some ringke 3m card slots, both the plastic and the nylon to add to the tpu cover that was included with the phone. Although not a flipcase, the downside with not having a solid magnet or full edge protection gives higher probability of the phone landing face down when dropped.
Exholeus said:
Orzly Wallet Flip Case looks decent enough. I am currently using the oneplus 6t flip case with card slot, and its okay. Doesnt flap much, but it does not compare to my last otterbox strada case for the iphone 8 plus. Still looking for something similar.
I've also purchased some ringke 3m card slots, both the plastic and the nylon to add to the tpu cover that was included with the phone. Although not a flipcase, the downside with not having a solid magnet or full edge protection gives higher probability of the phone landing face down when dropped.
Click to expand...
Click to collapse
I second the motion -- the Otterbox Strada on my Samsung S7 Edge is the gold standard for me. Most expensive case I've bought but has lasted many multiples longer than any other case. It's still a tank and still in use nearly three years later.
Closest case for OnePlus to that standard was the Tech21 flip case for my 6. Don't think they make it for the 6T though.
I'm using the flip case that I got from OnePlus when it's working fine.I've had better and I've had worse but pretty good I'm happy. No issues,, thinking about getting a OtterBox when they come out just for safety. But they're so big and bulky and ugly.,,,,,,,, I guess we'll see
I like cases.
My wife thinks that I have a fetish for phone cases.
I change them when I go out depending on what I feel like.
Here are the flip cases that I have purchased so far;
https://www.ebay.ca/itm/For-OnePlus...var=472229251615&_trksid=p2060353.m2749.l2649
The traditional brown leather flip case.
https://www.ebay.ca/itm/For-OnePlus...var=591631248320&_trksid=p2060353.m2749.l2649
Dr. Who TARDIS because....every phone needs to be inside a Tardis...
https://www.ebay.ca/itm/For-OnePlus...var=572979395291&_trksid=p2060353.m2749.l2649
Blue leather scroll work for when I'm feeling like Jazz.
https://www.ebay.ca/itm/PIN-1-Art-C...var=472327549790&_trksid=p2060353.m2749.l2649
Old School fun right here... I have purchased so many freaking cassettes over the years.. ugh. Why not put my phone in one...
I chose the white and green tape.
https://ca.mobilefun.com/olixar-xtome-leather-style-oneplus-6t-book-case-brown-70015
Old brown leather bound book.
I think that this book one will be my favorite flip case.
Only the Cassette tape case has come in so far.
It's a bit larger then a real cassette tape and it's a big large for the phone.
Then I've purchased another half dozen or so hard cover cases/non flip.
geeksquad2 said:
I like cases.
My wife thinks that I have a fetish for phone cases.
I change them when I go out depending on what I feel like.
Here are the flip cases that I have purchased so far;
https://www.ebay.ca/itm/For-OnePlus...var=472229251615&_trksid=p2060353.m2749.l2649
The traditional brown leather flip case.
https://www.ebay.ca/itm/For-OnePlus...var=591631248320&_trksid=p2060353.m2749.l2649
Dr. Who TARDIS because....every phone needs to be inside a Tardis...
https://www.ebay.ca/itm/For-OnePlus...var=572979395291&_trksid=p2060353.m2749.l2649
Blue leather scroll work for when I'm feeling like Jazz.
https://www.ebay.ca/itm/PIN-1-Art-C...var=472327549790&_trksid=p2060353.m2749.l2649
Old School fun right here... I have purchased so many freaking cassettes over the years.. ugh. Why not put my phone in one...
I chose the white and green tape.
https://ca.mobilefun.com/olixar-xtome-leather-style-oneplus-6t-book-case-brown-70015
Old brown leather bound book.
I think that this book one will be my favorite flip case.
Only the Cassette tape case has come in so far.
It's a bit larger then a real cassette tape and it's a big large for the phone.
Then I've purchased another half dozen or so hard cover cases/non flip.
Click to expand...
Click to collapse
Damn, your wife's probably right..!
But it could be worse: you could have a phone fetish instead of a phone case fetish, and that would be much more expensive.
The flip cases that I have ordered so far have come in.
Also, two of the hard cases have arrived as well. (As an aside, I don't like any of those yet. We will see if the rest of the hard cases are any better)
I like the oneplus oem flip case because it is the only one that has a magnetic feature that turns the screen on and off.
That is nice.
But I find it too small and it doesn't offer much protection.
And it only has one debit card slot.
Not useful as a wallet.
The oneplus, cassette tape and book flip cases do not have a magnetic clasp to keep them closed.
I kind of like that feature.
It gives me a fidget to play with.
And it makes it more noticeable if someone opens the case to take my debit card? Dunno.
Lol
Taking a look at the back side of these cases, some of them are not like the others.
Some of the cutouts look off.
I haven't checked them to see if it affects function or not.
Honestly I don't use the camera much anyways.
If anyone has any questions about these cases, let me know and I will do my best to answer them.
If anyone has a suggestion of another flip case for me to try out, then I am all ears!
P.S. And yes. The book is my favorite case so far. Followed by the Tardis.
Hi, I am looking for the same, but it is so hard... I know exactly what I want but all of the good looking cases are plastic inside and all the silicone ones are not-so-good looking.
Anyone found so far a sleek and elegand flip case with silicone inside?

Categories

Resources