Related
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
I used the Incipio Feather for a few months. I really liked the "low-profile" but it was very fragile. I ended up cracking two of them just from taking them off to do battery pulls. As far as grip goes, it was generally nice to hold but doesn't offer that much more grip then the phone by itself. I've also used the Ballistic SG and while it was too bulky for me it had excellent grip. I was able to put it on my lap, back facing down, while driving and it never moved.
Currently I use the Speck Candyshell and it holds up pretty well. Grip can become an issue if your palms get sweaty as the exterior is all hard plastic.
Maringer said:
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
Click to expand...
Click to collapse
I had the feather. After two drops on different corners, the case had cracks. I expected as much and the case did its job. I got the Incipio silicrylic case as a replacement, which has a silicon cover AND a hard cover. It's slightly bulkier than the feather, but it still looks good and is definitely more sturdy. Case is grippy but not overly grippy where you have a tough time putting the phone in your pocket. I can remove the case without fear of cracking it, unlike the feather.
I had one of the Incipio Feather's also. It lasted about 2 months before it completely fell apart. Is is a nice case and I really liked the feel and look of it and it will fit in the car dock with a little modification. But it is not rugged enough for me to recommend. I am using a TPC case now. Does the job. Easy to remove to put in my Car Dock, LapDock or Standard Dock. It feels much better than the Atrix does by itself. But it is kinda ugly. But I have dropped it a few times and it keeps my Atrix safe.
The Seidio Active was my choice and I like it a lot. Two pieces - rubber with hard shell skeleton protects it nicely.
I can remove it (to dock) in seconds and replace it quickly too. Got it at Amazon: http://www.amazon.com/gp/product/B004WKIEF2/ref=oh_o03_s00_i01_details
That's the sapphire blue one, but they have other colors.
I'm using the otterbox commuter case. I got it off of Amazon.com for only 20 bucks on Saturday. So far it's been amazing
Sent from my MB860 using XDA App
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Of all the experiences I have read about cases and their compatibility with docks, the only one that I have heard that works is the Incipio Feather (or somehting similar) when taking in the consideration of actually not removing the case.
troycarpenter said:
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Click to expand...
Click to collapse
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Yes, I have read that people just simply remove the insert that is in the docks and it fits just fine. I have seen pics before too but can't remember where I saw them. Maybe I can try to find them.
troycarpenter said:
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Click to expand...
Click to collapse
---------- Post added at 11:29 AM ---------- Previous post was at 11:16 AM ----------
Here is a thread about a mesh cover (which is essentially the Feather but with a mesh look) and the second link is a post of someone in that thread showing the Atrix in the car dock with the case on.
Thread:
http://forum.xda-developers.com/showthread.php?t=1194096
Post with pics:
http://forum.xda-developers.com/showpost.php?p=16704009&postcount=27
Here is another thread discussing (and maybe confirming) the Feather working with docks:
http://forum.xda-developers.com/showthread.php?t=982574
The Incipio feather will fit in the car dock with the cardock insert removed, but the latch wont close. It has a ridge that comes over the face of the phone, but sits on top of the feather case. It will work if you make sure you have it inserted firmly all of the way in. I take corners pretty fast and had it fall out a couple of times. I modified mine to make the latch close pretty easily. Put it in the cardock and marked the outline with a X-acto knife. Used diagonal cutters to cut the 2 short vertical cuts. Scored the Horizontal mark with the X-acto knife and snapped the piece off with some lineman pliers. Now that these are $10 apiece I am tempted to get another one (or 2). Just was not worth the 25 bucks I paid 6 months ago.
Thanks for the various comments about cases.
I've looked at the various recommended cases and think I'll probably have to give the Incipio Feather a miss if it is as fragile as others have mentioned. I'm based in the UK so I'd have to order the case from the US (can't locate a UK seller) and this would cost me the equivalent of around US $ 45.00 which is a bit too much for something which won't last long!
Various other hard cases aren't available in the UK either (or not at decent prices) and, for me, the most important thing is to have a case lacking in bulk.
The Otterbox Commuter is the only one I get can get reasonably cheaply from within the UK (about US $ 20) but I'm not taken by the look of this.
Therefore, I think I've settled on the Seidio Surface which looks to have good reviews and will hopefully be the sort of slimline case I can deal with. I can obtain this via Amazon UK from a US seller for a mere US 36.00!
Incidentally, in the monster "Ruggedized battery cover" thread, there was mention that the Seidio Surface fits the lapdock and can be easily removed for the car dock:
http://forum.xda-developers.com/showpost.php?p=16600986&postcount=379
I don't own either dock so this isn't really of relevance to me!
I started looking for a discrete case for the same reason (battery door is way too slippery.)
There were some Chinese-made rubberized battery door replacements that seemed popular a while back. Most of the mobile accessory sites that carried them sold out, though I found and ordered one on eBay. The seller seems to have more:
http://www.ebay.com/itm/Back-Cover-...ltDomain_0&hash=item415bd6c69c#ht_2880wt_1085
I just got my yesterday. Fitment is surprisingly accurate, no misaligned cutouts or anything, and the added bulk is acceptable. Feels much better in hand now, too, when typing in landscape mode. It takes a deliberate effort to free the phone from the case, as it has a couple of tabs that clip into the retaining slots used by the factory battery door. Haven't noticed it snagging or coming loose as it goes in and out of my pocket either.
edit:
I just noticed the "dock fitment" discussion going on in this thread. I can't say anything about this case + docks since I don't own any docks.
I fashioned a case out of 3M carbon vinyl wrap. Keeps that Carbon Fibre effect on the back case whilst making it much more grippy (never dropped it since) and much more aesthetically pleasing as it gives off a 3D carbon fibre effect.
I can post pics if you like
Also worth mentioning you can pick this stuff up dead cheap off eBay - http://www.ebay.co.uk/itm/30x20cm-G...arParts_SM&hash=item4cf189dd66#ht_1792wt_1163
This sheet will give you a few attempts at it. It took me 2 to get mine the way I liked it
If you are just looking for grip without affecting aesthetics the Zagg Total protection is a great option. Clear is nearly impossible to tell it is on there. It is the same material and install as the screen protector. So no residue when removed. Make sure you read/watch the install tips from Zagg. I have been using it since April without a drop.
I have; however, decided to get a case and am trying the Seidio Active. The wife got the Incipio Silicrylic. both indeed fit in the HD/Standard Dock with the insert removed, I'm curious about whether there is enough support from the back of the dock though. As mentioned, I'm guessing the car dock will not close due to the extra couple millimeters, but will try it out and reply if it does indeed work.
Well, the Seidio Surface winged its way across the Atlantic reasonably quickly and I received it earlier this week.
It is very slightly bulkier than I expected but it is still very slimline so this isn't a problem as it still fits in my pocket easily. A little more difficult to take the phone out of my pocket than previously but again, not really a problem.
The surface of case itself isn't as 'grippy' as I expected, either, but it is a great improvement to the usual slick battery cover and I haven't juggled with it yet this week! I can now operate the phone using one hand if necessary without fear that I will lose my grip and drop it.
There are a few small imperfections on the back of the case - it would seem as though there were a few specks of dust or some other substance on the case before it was covered with the rubberised coating as a few tiny bumps can be felt. Not enough of a problem for me to bother returning it all the way to the US, however!
It is slightly tricky to take the Seidio Surface off the phone - it seems to come off easily sometimes but remain stubbornly in place at others. I think I'll need to practice taking it on and off the phone a bit more until I get the knack.
Overall, I'm reasonably impressed with the case and would give it an 8/10. It would have received a higher score had it not been so ridiculously expensive for me to buy here in the UK - Amazon.com are selling it at approximately half the price I paid!
Purchased the SiKai MicroFiber case for the Lenovo IdeaPad K1 Tablet. Delivery was within the UK and didn't take too long, about 5 days including the weekend.
I paid £15.19 delivered from Ebay UK Item number: 200647561882
The case is made from a strange type of plastic material, it's quite soft and flexible. Am kind of glad rather than faux leather. It is very thin and light, but seems sturdy enough to protect the tablet around the house. I have a 10" netbook bag that I keep it in when travelling to add extra protection.
I like it since it makes it easy to carry around with you and doesn't add bulk to it. I would say the case is lighter than my official HP Touchpad case and similar in strength, although a different material. I can only compare it to the ROOCASE Multi-Angle Leather Case and can say it is much thinner and lighter than that.
There is only one angle that the case allows for, but since it is an Android tablet you can flip the whole thing round and get a lower angle. Its fine for watching at night when streaming video so its not an issue for me.
Price wise the only options available to me at the time were the faux leather ones for about £9.99 or the official case from the Lenovo website coming in at a hefty £34.99 once you add the crazy £10 delivery charge! Not many options in the UK unfortunately but am glad I did some research and found this case.
Other things that you might notice in the photos (sorry poor camera phone ones) there is a place to put a pen, all cut outs seem correct and I love the fact that I can charge it without having the case open, also the hdmi port is free.
Not sure how long it will last but considering the few days usage of it, the minor things like the tablet can slide a tiny bit inside the case so would have preferred a tighter fit (although will try and adjust the velcro again that closes once you slip the tablet inside), the cut out by the front facing button could be a bit lower, and the magnetic clasps to be quite weak I will give this case an 8/10 and can recommend it.
http://www.ebay.co.uk/itm/SiKai-MicroFiber-case-Lenovo-IdeaPad-Tablet-K1-case-/200647561882
great case! I bought this sikai case too and actually prefer it more than the original lenovo K1 case.
This covers all ports, and also has a great microfiber texture that is slightly grippy, while remaining smooth to the touch. does not attract dust at all and keeps the K1 snug (if it feels loose, readjust the velcro tighter).
recommended!
Yeh have tightened it a bit more, doesn't move as much.... Glad I chose this over the cheaper cases and the official one which was more than double the cost here in the UK.
Can't believe how dead this forum is for this tablet, going to see if there are anymore forums with more support....
Just got this tab last week and love it so far. Looking for a good case but hate the leather, faux leather look.
Please let me know if you find more forums as I have looked and am surprised how little I've found....
I know of one other decent one, google "lenovo community K1"
viggs74 said:
Just got this tab last week and love it so far. Looking for a good case but hate the leather, faux leather look.
Please let me know if you find more forums as I have looked and am surprised how little I've found....
I know of one other decent one, google "lenovo community K1"
Click to expand...
Click to collapse
Cool will do.
This case is pretty good if you want something thin and light, there are stronger/more protective cases out there but they add bulk and I don't want that since I use this round the house...... Still glad I bought this case and find it better in that respect to the Roocase.....
Thanks, will google what you said.....
Got the SiKai for my TPT. Everyting else looks bulky in comparison. It is extremely thin (I''ve tried a lot of gadget cases over the years), and although it's screamingly vinyl, it doesn't look really cheap since it fits so well. Leather like this might come off as over-the-top (not that I wouldn't probably sucker into that if I could find it). It's got the seam around the edge where it cushions a drop, and the magnetic closure on the flap is a great touch, not too powerful, but it stays closed well enough.
My gripes are with the screen cover flap: it leaves two stripes on my matte screen protector where the fold places rub off the grease I thought I cleaned off last night, it doesn't hold the tablet vertical enough to really use, and it's busy looking on the front. If I had a choice in the design, I would leave off the "stand" capabilities and leave it flat. If it's open, it's really floppy; it would be easier to manage if it were entirely rigid. I might add a hide-able tether & a knob/button so you could stand it up on its other edge more vertically instead.
All in all, for the price I paid (US$26-ish), I'm very happy with it. If Piel Frama comes up with something, though, I might check that out, if only to drool. I still love my old Wizard case, and my Advantage case from them, too. Very lovely, solid product, and they've been keeping customers happy for a long time.
Addendum: After a couple of months with it, mine is holding together just fine. I had to trim a bit of vinyl fringe, butvall vinyl does that ( it frays a bit after it's freshly cut, but after you trim it once, unless it's cut really crooked, you're done). I have noticed that after a bit of stretching from the daily+ in & out I do to use the dock, it's loose enough to partially obscure the rear camera, not to mention trying to take pics with the flap cover is a huge PITA. If I used this camera a lot, I'd be totally fed up with this case. I may also be melting a bigger hole for the speaker (whch is hard-core disappointing to begin with). All in all, though, that's it for my complaints, which is pretty rare for me.I plan on cloud storage sync and a great cam on my next phone to use the tab for pviewing,
To be fair the official HP Touchpad case does the same thing to my Touchpad so it's one of those things.
I use the same case for my Thinkpad Tablet, and it's the best I've encountered so far, albeit with some flaws of it's own: Some of the stitching on the inside of the cover is already beginning to fall apart after ~1 Month of usage :-/
Stitching has been fine on mine, maybe tell the reseller to exchange it?
Wow cool.... but its little bit expensive
Hello
Have any of you tried the TRIDENT AEGIS case for the ATRIX 4G. It surely looks great and functional, but I'm not sure abut the build quality as it can be docked along with the phone. Please post your review and pictures
Sure!
Just ordered from their site, and look very promising, JUS THE WAY I WAS EXPECTING A CASE TO BE for the Atrix! (And let me tell you I own at least 6 cases each one 30+ f*** bucks)
Once I get it delivered, will upload a modest review and some pictures attached in HD dock and Lapdock, (´cause of course, it won´t fit car dock)
My primary case is an Active Case from Seidio (such a fantastic combo) along with its Holster Clip. However, taking my Atrix out of the case for car dock navigation or simply hd dock is a pain to the a-....
OK! I remember! (this mojitos won´t help that out... however, mmmmm!) The point of this case for me is to get it fit in the holster clip from seidio active without the case for sure, using trident´s.
Will let you know!
ok, let us know, i just felt in love with the nice "man solid appeal"of the case
Think it twice
Hey guys,
As you know I ordered this case some time ago, and just received it. And you know what? I´m not in the mood to make a review of it, at the second attempt to open the flap to engage the media/dock mode, one of the strings just broke up, the bottom one, so easy (and I´m a very careful person regarding these matters) without forcing it at all or aplying so much pressure.
So if you want to try for yourself, go for it BUT PLEASE, excercise the most delicate usage if don´t wanna go my way.
So sad...
trident aegis
First, this case is on sale at Amazon for $10 including shipping!!
I am impressed with the quality and feel. This origionally sold for around $35 and you get what you pay for. It comes with a screen protector (a dry one) also a covering for the camera lens. I have a plastic plug for the earphone jack I got off ebay for $1.
This is a hard polycarbonite case, not the soft flimsy type, and it is thin yet sturdy and feels and looks great. So far I love it.
If you place your thumb on the center back logo when opening, it opens easily.
If I find any problems or any disappointments I'll post here. But for $10 you can't go wrong.
I'm sorry to hear about your bad experince with the case but so glad you are telling about.
There seems to be mixed thoughts on the case. Decided to get the seidio surface as I only hear positive feedback on this.
CK
Yeah mine broke at the hinge after a couple of weeks too.
best case
I've had almost every case made for the Atrix. The Aegis is by far definitely my favorite because it is small, neat, nice materials, feels good, looks great. Yes the hinge is a bit delicate, but if you CAREFULLY open the case you can avoid breaking the hinge. And even if you break it you can still use the case depending on how bad it breaks. The case is made from a hard polycarbonite material, not a soft rubbery silicone which I got very tired of over time. These cases are on sale on Amazon for $10, down from the regular $30.....cheap. I bought 2 of them just in case. Comes with a dry screen protector and a cleaning micro fiber cloth. Also comes with a camera lens cover but that added fog to the picture when using the flash so I don't use that. This case put new life into my Atrix so I am happy for the time being. I bought silicon covers for the ports off Ebay for a few bucks to keep out dust. Anyway just my opinion on things.
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
Disclaimer : I do not benefit in any way for saying anything good or bad about these products. I am giving you guys my honest opinion on these cases to help provide some assistance on buying a case.
Let’s start with the first case I bought from them.
Orzly Flexicase (Clear)
Link to the case: https://www.amazon.co.uk/dp/B072MZCQB6/ref=cm_sw_r_cp_dp_T1_v8mFzb704M66R
Price :£12.99
Things I like: Simple case, adds much need grip to the OnePlus5. Doesn't detract from the overall phones aesthetic or feel. , Good lip around the camera bump and the front.
Things of concern: It's a simple case, it's mainly there to prevent scratches. Not going to protect your phone from anything major
Comments: I really like this case, there is a craft to a making something simple and effective and this is it. No fancy features it just protects your phone from scratches, adds grip and protects from small drops. It doesn't over stay it's welcome and I congratulate on that.
I was happy with my purchase at the price I paid but since it has gone down. I think anyone wanting a simple case you can't really go wrong with this.
Also like to note, I haven't had problems with any holes in the case. Some people on other forums have asked me about the quality of the finish. No evident problems with the finish of my case.
Photos: http://imgur.com/a/c8eOF
Orzly Wallet Case (Black)
Link to the case : https://www.amazon.co.uk/dp/B072QV1VRT/ref=cm_sw_r_cp_dp_T1_qInFzbCVEWP0X
Price: £14.99
Things I like: Protects the screen while it’s closed, Magnet keeps the wallet closed well, Effective card slots and pocket slot, Effective stand, I like the case that holds the phone in the wallet, not too bulky.
Things of concern: It’s a wallet case, people either love them or hate them.
Comments: I had this case for my HTC 10 and they have improved this case immensely. Now having three card slots instead of two allows me to take my bank card, ID and my public transport card without having to double up in the slots (That can create further issues). The main issue with last years was the case that held the phone in place. Last year was a hard shell, now throughout my time working with phones, more than half of wallet cases I have seen have broken inner shells because they use a hard shell inside. This year they have basically taken the great Flexicase design and used it as the holder for the wallet case. That was a great move and make the wallet case great.
For a wallet case, this is a solid wallet case. You can’t really go wrong with it.
Photos: http://imgur.com/a/j1FFv
Orzly Slim Stand Case
Link to the case : https://www.amazon.co.uk/gp/product/B073S7BWQQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Price:£12.99
Things I like: THIS THING IS SLIM, the case itself may be the lowest profile case I have used on the OnePlus5, The stand can withstand a lot, stand can be rotated in different ways.
Things of concern: This case may not work with some in-car phone holders, the stand bulges out and made it hard for my vent holder to hold it.
Comments: I picked up this case because I was intrigued. I didn’t think I would like it but I really did! The case has a really nice soft touch finish and provides protection for the camera bump which is surprising as the case is really low profile , it provides a very small lip on the front so it may or may not protect the phone from if you put your phone screen down. The case doesn’t really take much away from the buttons which is nice.
The ring stand is really handy, A couple of times I’ve used it. I do find myself playing with the ring stand itself and hanging my phone off my finger, the case fits very well I can trust that my phone will stay there hanging. The stand really is quite strong. I can put a lot of force on the stand and it didn’t feel like it would break, (I have posted a video demoing that) The things I would say is that I would like the stand to have different standing points, it would be nice to have the phone to stand at different angles, while this isn’t a major thing, I thought I’d point it out.
I really like this case, nuff said.
Photos: http://imgur.com/a/kHBlm
Video:
Orzly Fusion Case
Link to the case : https://www.amazon.co.uk/gp/product/B072MPYX9Y/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Price: £9.99
Things I like: Not bulky, feels like it would protect the case.
Things of concern: Can’t think of anything…
Comments: This is the case I have on my OnePlus5, I really like it. It’s like the FlexiCase but better. This honestly feels like this case has been designed by someone who’s wanting a make a case for themselves. There is extra grip points around parts of the case which your hand is in contact with. That’s a smart move. There is some little feet on the back around the clear back, this is a expert level move from Orzly, clear plastic scratches easily by doing this the plastic clear back from the ground. The clear back is quite hard and seems like it could withstand a drop, this is the motto of this case: it’s solid.
Photos: http://imgur.com/a/CqoVz
Comments About Orzly
One thing I have noticed is Orzly has revamped their packaging. It’s more like you would see in a shop and has nice little touches to them. Having a little tab to pull to open the box and having nice information (To read on the toilet obviously) adds to the over. Here is some photos : http://imgur.com/a/vZ4eu
Please ask any questions and if this helped someone, if you liked it I may do more.
Thanks so much for this. I agree with the flexicase and slim case, both have been great for me and I have already used the stand on the slim case for a train journey. Worked out great. I am looking forward to receiving my fusion bumper case from the reviews both you and niijonodhg have been giving!
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
If it helps, my favourite case so far has been the Fusion!
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
abe2912 said:
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
Click to expand...
Click to collapse
Getting both of them might be a good option. My favorite is the fusion but the slim case is really good. The slim case adds grip to the phone without much bulk or extraprotection where as the fusion is really grippy as well as adding more protection.
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
AnabolicAndroidz said:
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
Click to expand...
Click to collapse
Any stand is nice really, what I like about the slim stand case though is that you can put your finger in the ring and it will mean your phone cant drop, very useful actually
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
abe2912 said:
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
Click to expand...
Click to collapse
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
Looks really good with that dbrand skin! Glad to know you had the same sort of material that didn't yellow
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
That is beautiful!
Finally got my video up:
niijonodhg said:
That is beautiful!
Finally got my video up:
Click to expand...
Click to collapse
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
ab7casper said:
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
Click to expand...
Click to collapse
Thanks!