Adapted oficial ROM with @mparus kernel
Flash this recovery ( only work whit this)
https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
Flash rom
Flash adaptation zip
Flash navbar
Flash gapps
For update ThE shame operation with wipes cache and dalvik,system
Adaptation zip
Enable navbar
ROM
https://download.lineageos.org/cherry
Bugs
Nfc
Are you maintaining official builds of lineage for G7? Does this mean that we'll be getting updates?
Enviado desde mi Moto G4 Plus mediante Tapatalk
can i flash it to g7-l11 its on android 6.0.1 and i unlocked the bootloader and install twrp 3.0.0 and root with magisk
Can you please reupload Adaptation zip and navbar somewhere, where registration is not required?
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
luistro said:
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
Click to expand...
Click to collapse
One question bro... Does the rom support F2FS?
Sent from my Moto G4 Plus using Tapatalk
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
no problema here
can you plz redownload the navbar enabling ?
can i flash it using twrp cause i have problem with philz
Folueadeux said:
can i flash it using twrp cause i have problem with philz
Click to expand...
Click to collapse
of course
GessaNNN said:
of course
Click to expand...
Click to collapse
well actually, as op mentioned it works with philz only.
i tried installing with twrp, it failed and the error message was something like this rom is not compatible with your device.
then i tried the recovery op linked, worked a charm.
mhanp said:
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
Click to expand...
Click to collapse
Hi.first register on htcmania to download files and install rom and other tools and gapp and clean cach/delvik and restart...with philz recovery...
Excuseme my english not good..
Personally, I inject an install script made by me in which there's G760-L01 as compatible device everytime I download a new nightly, then it flashes with TWRP without problems.
updated firts post
Can someone help me with an issue i have?
my headphone jack stopped working and the only way it works again is with an app called SoundAbout but i'm very tired of switching modes everytime..
is my headphone jack damaged or is it the system not correctly routing the sounds?
I've flashed many ROMs and still no fix, have to use this stupid app please help!
Hello, I was trying to install this custom rom from TWRP 2.8.7.0 but when i try to flash this file i get the following error
E3004: This package is for device : c8817d,g620s,C8817D,C8817E,G621-TL00,G620S-UL00,G620-L01,Che1-CL20,Che1-L04:
this device is .
Click to expand...
Click to collapse
along with the following error messages (that i think they are related to twrp):
E: unknown command [log]
E:Error executing updater binary in zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Error flashing zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Click to expand...
Click to collapse
I don't have that much skills in rom flashing for android (I've only flashed almost successfully another rom for a lg g7-01), so can someone please help me with this?
Thanks in advance, Spinoni31.
Edit: I decided to switch to philz and it worked. The only things that don't seem to work are the NFC, and with it, my flip cover. If soemone can help me on this matter, i would really appreciate it. Thaks, Spinoni31
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Vodes said:
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Click to expand...
Click to collapse
Magisk link please :highfive:
Alanryav said:
Magisk link please :highfive:
Click to expand...
Click to collapse
Works perfectly fine with the official Magiskv14.0.zip
Related
Hi SM-T531 and SM-T535 owners .
I present for you Mod Deodex based 5.0 stock firmware . After using this mod you get deodex stock firmware . You can to install Xposed modules and other mods and improvements . You can deknox , debloat your firmware .
T531 mod based on T531XXU1BOE6 stock firmware .
T535 mod based on T535XXU1BOD8 stock firmware .
HOW TO INSTALL :
Mod installs on based firmware (prefered pure firmware). Firmware must have installed SuperSU and BusyBox . Also you must to install custom recovery (prefered Philz Touch ) . Mod-archiv put to ExtSDcard .
Then you go to recovery and install mod from ExtSDcard . After installation you need do wipe dalvik and cache . Reboot .
Not to do any wipe before installation .
Wait 6-12 min . Then will be optimization .
Mod have SDcard fix .
DOWNLOAD :
SM-T531 https://www.androidfilehost.com/?fid=24052804347799032
SM-T535 https://www.androidfilehost.com/?fid=24052804347799026
Thanks :
@wlryss @Sekes@klaus.ad
Reserved
Reserved
Please change the SMT535 link. When flashed in twrp bootloop. The problem is this rom is for smt530 no for smt535.......
Enviado desde mi SM-T535 mediante Tapatalk
isaakmg said:
Please change the SMT535 link. When flashed in twrp bootloop. The problem is this rom is for smt530 no for smt535.......
Enviado desde mi SM-T535 mediante Tapatalk
Click to expand...
Click to collapse
You must to use Philz touch recovery (read OP) https://www.androidfilehost.com/?w=files&flid=23537
If you want to use TWRP you need select him . I dont garranty it correct work
repey6 said:
You must to use Philz touch recovery (read OP) https://www.androidfilehost.com/?w=files&flid=23537
If you want to use TWRP you need select him . I dont garranty it correct work
Click to expand...
Click to collapse
With Phliz Recovery the same problem, bootloop after flash. The link for SMT535 isn't for this model.....
Enviado desde mi SM-T535 mediante Tapatalk
isaakmg said:
With Phliz Recovery the same problem, bootloop after flash. The link for SMT535 isn't for this model.....
Enviado desde mi SM-T535 mediante Tapatalk
Click to expand...
Click to collapse
Strictly implement the recommendations of the OP and succeed . May be you have another version stock firmware or forgot busy box or else .
I reformat my sm-t535. Then flash stock rom that wifi doesnt work. After that i flashed this mod. After the installation it says that i dont have supersu and if i want to install. So i install it. Then it reboot and optimize. When it reboot it has an app "supersu installer". and i have to install the gui of super user. where do i hace to find it?
NHOman14 said:
I reformat my sm-t535. Then flash stock rom that wifi doesnt work. After that i flashed this mod. After the installation it says that i dont have supersu and if i want to install. So i install it. Then it reboot and optimize. When it reboot it has an app "supersu installer". and i have to install the gui of super user. where do i hace to find it?
Click to expand...
Click to collapse
More detales please . What is the superSU ? How you installed it ? Were Busybox and superSU installed before flashing mod?
repey6 said:
More detales please . What is the superSU ? How you installed it ? Were Busybox and superSU installed before flashing mod?
Click to expand...
Click to collapse
I reformat my tablet. So no busybox and supersu installed
NHOman14 said:
I reformat my tablet. So no busybox and supersu installed
Click to expand...
Click to collapse
How you install this mod if you dont read OP? I dont know for sure how i can help you . Reflash superSU again and install busybox
repey6 said:
How you install this mod if you dont read OP? I dont know for sure how i can help you . Reflash superSU again and install busybox
Click to expand...
Click to collapse
Ok ill try.
Thanks.
This mod doesnt let you on the wifi. I tried it by myself. I flash stock rom and flash this mod and it happened. Does this thing happened to you?
NHOman14 said:
This mod doesnt let you on the wifi. I tried it by myself. I flash stock rom and flash this mod and it happened. Does this thing happened to you?
Click to expand...
Click to collapse
At first you need install your stock firmware and start it .Then check your wifi and etc. Then install supersu and busybox . And only then install mod .
repey6 said:
At first you need install your stock firmware and start it .Then check your wifi and etc. Then install supersu and busybox . And only then install mod .
Click to expand...
Click to collapse
Ok sir, ill try. Coz i flashed it without root.
Thanks.
I did all you said, but my installer could no longer install apps.
emassy said:
I did all you said, but my installer could no longer install apps.
Click to expand...
Click to collapse
Very little info .
You say we must flash SD card mod. Then you say SD mod is in rom.
Must I flash SD mod?
Where is SD mod flash file?
Sorry just confused...thanks
UPDATE:
When the install is finished can I install TWRP 3.0 recovery?
Finefeather said:
You say we must flash SD card mod. Then you say SD mod is in rom.
Must I flash SD mod?
Where is SD mod flash file?
Sorry just confused...thanks
UPDATE:
When the install is finished can I install TWRP 3.0 recovery?
Click to expand...
Click to collapse
The first is full nonsense .
And yes , you can install .
repey6 said:
Very little info .
Click to expand...
Click to collapse
What i meant was that my default installer was corrupt and auto stops each time i boot my phone as such i cant install apps even from googleplay store. Again i had to reflash my stock rom in order to fix it back error.
emassy said:
What i meant was that my default installer was corrupt and auto stops each time i boot my phone as such i cant install apps even from googleplay store. Again i had to reflash my stock rom in order to fix it back error.
Click to expand...
Click to collapse
My mod is absolute correct . All your issues from your incorrect istallation
For SM-G530H / 5.0.x Lolliopop ONLY!!!
DEODEXED OR ODEX!
ADDITIONAL NOTE: (Nov 2020 update) Hey, Sorry I've been gone for a long time and I don't have the phone in me now. I don't think I can help you guys in any way as I don't have the phone anymore. DO IT AT YOUR OWN RISK AND ALWAYS DO A FULL BACKUP.
INTRO:
You can now install TWRP recovery and Chainfires' SuperSU without using a PC! All you need is your Android Device and a stable internet connection.
REQUIREMENTS:
• Internet Connection
• Flashify (Download it from GOOGLE PLAY)
• Mega (Download it from GOOGLE PLAY)
• Kingroot [Latest] (Search it on GOOGLE)
• TWRP.img | Download link (MEGA)-> https://mega.nz/#!YB9RiJza!Acn3L1Js7JyLUK3im8vwvTs6CIkak01uarVC-opOihk
TUTORIAL:
• Root Your Device using KINGROOT.
• Now you're rooted! Move ''TWRP.img'' to ExternalSdCard
• Open ''Flashify'' app, Find ''RECOVERY IMAGE'' and you'll be prompted... Choose 'CHOOSE FILE' and locate the 'TWRP.img' on your ExternalSdCard.
• You'll be ask to reboot. Restart Your phone and it will automatically go to twrp recovery! Done!
EXTRA TUTORIAL: KINGROOT TO SUPER SU!!!
• Download This SuperSU~> https://mega.nz/#!8VVTjBwL!MmLt-iJZ79kYlZo6bOW0chVQxG90cAR0fdppar-E-fQ
• Move it to EXTERNALSDCARD
• Flash Via TWRP
• DONE! Congratulations, Kingroot is gone and you now have SuperSU!
Did it work for you? Tell us in the comments!
Hit like if this tutorial helped you :3
NOTE: every time you restart ypur phone it will automatically go to TWRP recovery, Don't worry it's normal.
On latest samsung firmwares(I'm using xxu2bok3 for 350h)im using cwm and flash it with flashfire and don't have the reboot in to recovery bug, before the firmware update(xxu...BI0)have that bug, think Sammy fix the kernel b/c I'm also notice that my phone is faster keep more ram free, even with a lot of app open in the back and the best is not aggressive on managing the ram any more closing the apps when you open another and let it in the back.
Good tutorial ?
Also you could mention that if anyone wants to use Xposed, now is not necessary deodex the ROM, with version xposed v79 beta from artec, just need to free some space and flash it through TW or cwm.
Enviado desde Tapatalk!!
Is it working on g530h xcu?
nicochristian04 said:
Is it working on g530h xcu?
Click to expand...
Click to collapse
Yes! We are using the SAME phone so I'm sure this will work for you
Added SuperSU tutorial.. Isn't that great? Ypu can now do anything without PC!
... Except for flashing a stock rom tho, hahaha
Keitaro1999 said:
Yes! We are using the SAME phone so I'm sure this will work for you
Click to expand...
Click to collapse
If anything goes wrong i can fix it by flashing stock rom right?
nicochristian04 said:
If anything goes wrong i can fix it by flashing stock rom right?
Click to expand...
Click to collapse
Of course! but again, Your on ur own now... If anything happens I'll be glad to assist you but that's all I can do.
Hey if i installed the twrp then i flash stock rom, will the recovery back to stock or still twrp recovery?
Will this work on my SM-G530AZ running 5.1.1 lollipop? Keep in mind I already rooted my phone using the same method without the twrp.
-Thanks in advance
Illyakulinych said:
Will this work on my SM-G530AZ running 5.1.1 lollipop? Keep in mind I already rooted my phone using the same method without the twrp.
-Thanks in advance
Click to expand...
Click to collapse
Nope.
nicochristian04 said:
Hey if i installed the twrp then i flash stock rom, will the recovery back to stock or still twrp recovery?
Click to expand...
Click to collapse
It should go back to stock recovery. But I'm not sure~ haven't tried that yet.
thanks
Is it working for g530h xcu kitkat? Thanks for response
Please someone give me alternate link to download twrp.img
Excuse me, i'm using SM-G530H XCS lollipop now. Where can i get the latest TWRP recovery? (3.2.3.xx isn't it?)
I used to search it on google but i can't found it.
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
Rooted my redmi Note 3 kenzo with supersu. Even after granting root access es file explorer Pro & similar apps are unable to install, uninstalll multiple apk files in 1 click.thought problem is with supersu so replaced it with magisk but the problem persists.my friend can install multiple apk in 1 click on his moto g2. Please help me to solve this problem
please help somebody
I think ur system is not properly rooted... let us know how did u root the system 1st..
evansourav said:
I think ur system is not properly rooted... let us know how did u root the system 1st..
Click to expand...
Click to collapse
I used both magisk & supersu but nothing works.titanium backup works.
it works on ported miui nougat roms&viper also
but in all other runs it fails.
borsemayur2 said:
I used both magisk & supersu but nothing works.titanium backup works.
it works on ported miui nougat roms&viper also
but in all other runs it fails.
Click to expand...
Click to collapse
Which rom you are on currently, Which twrp are you using?
evansourav said:
Which rom you are on currently, Which twrp are you using?
Click to expand...
Click to collapse
iam using dual boot patcher.have 5 roms.miuipro nougat is primary.es install is working in it.but not working in nitrogen nougat,oreo & miuipro mm & rr.using red wolf recovery
borsemayur2 said:
iam using dual boot patcher.have 5 roms.miuipro nougat is primary.es install is working in it.but not working in nitrogen nougat,oreo & miuipro mm & rr.using red wolf recovery
Click to expand...
Click to collapse
Dual Boot is logical to me but running 5 roms at a time simply shows you want to be Coc$y not Geeky .. you asked for problems now you should know to find the way too.. Good luck!
evansourav said:
Dual Boot is logical to me but running 5 roms at a time simply shows you want to be Coc$y not Geeky .. you asked for problems now you should know to find the way too.. Good luck!
Click to expand...
Click to collapse
I have tried all roms without dual boot patcher but(1 at a time) but the problem exists
Clean Fastboot Miui..
working in ported roms like epic,miuipro nougat
not working in most of the roms
I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.
Yes, it is not working for me
Hello does the rom working? I cant install it because i cant have TWRP working in my device
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again
Which Kernel to use with this Rom?
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse
phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.
Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.
someone needs to compile a new twrp recovery for us, xperia z ultra orphans