Android Pie and Oreo for z ultra!! But... - Sony Xperia Z Ultra

I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari

I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?

billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.

Yes, it is not working for me

Hello does the rom working? I cant install it because i cant have TWRP working in my device

Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check

Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again

Which Kernel to use with this Rom?

raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel

raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.

I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...

I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse

phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot

phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.

Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD

install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse

phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.

Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)

raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.

someone needs to compile a new twrp recovery for us, xperia z ultra orphans

Related

LineageOS 15.1 on P10

Project Treble made it possible to install LineageOS on a P10 running on Oreo (not mine, yet). More info on the Honor View 10 forum: https://forum.xda-developers.com/honor-view-10/development/rom-lineageos-15-1-t3753000/post75665202
This sounds amazing. Will have to try over the weekend if I get time.
if i have time later tonight ill give it a try but i don't think that'll work bc i'm on 7.1 and i haven't gotten the update for oreo on mine vtr-l09
D4XT3R said:
if i have time later tonight ill give it a try but i don't think that'll work bc i'm on 7.1 and i haven't gotten the update for oreo on mine vtr-l09
Click to expand...
Click to collapse
Yes that's what I'm also wondering because I have an VTR-L09 and haven't gotten an update for Oreo yet and I kinda wanna try this but don't wanna brick my device
P10 Plus can also be used
with no root BOOT, I was flashed the system.
Wahoooo said:
with no root BOOT, I was flashed the system.
Click to expand...
Click to collapse
Were you on EMUI 8 before you flashed this?
Is there a way to get the fingerprint gestures working as in emui?
i'm now on emui 8.0 and i haven't updated to lineage 15.1.. but i don't think that i'll be the first one to do it i don't want to brick my phone
I just installed AOSP version from 4PDA forum ist 64 bit version oreo 8.1 instalation trought adb fastboot,manual system.img flash.Working but have many bugs,fast charging not work,aosp camera crash external camera app working well,many apps crashing like facebook,wats app.Not able to use for daily device.Lineage and RR also avaible.I will test later.
Now tested lineage os,it work perfectly all apps working,camera working,I will use as daily phone now.
x1988 said:
Now tested lineage os,it work perfectly all apps working,camera working,I will use as daily phone now.
Click to expand...
Click to collapse
What about the camera quality?
It bad than stock rom,just because aosp camera not using second monochrome sensor,later i will try with default huawei camera app, from stock rom
x1988 said:
It bad than stock rom,just because aosp camera not using second monochrome sensor,later i will try with default huawei camera app, from stock rom
Click to expand...
Click to collapse
What system image did you use for the P10?
Friends I am a little new in this roms for huawei p10 but I would like to know if you can install linage os 15.1 for huawei p10 and how can I do it. Thank you
Does LTE works without problems?
DarkPJV said:
Friends I am a little new in this roms for huawei p10 but I would like to know if you can install linage os 15.1 for huawei p10 and how can I do it. Thank you
Click to expand...
Click to collapse
Follow the link in the OP. Basically you replace the system.img.
M1chiel said:
Follow the link in the OP. Basically you replace the system.img.
Click to expand...
Click to collapse
But it works correctly for my huawei p10. I do not want to ruin my phone You already proved it in huawei p10. Thank you very much for answering
So I have it installed and it boots. The issue I keep encountering is with Google Services Framework popping up all the time, so I can't get past the setup screen. Anyone have any ideas?
EDIT: Never mind. Just installed stock recovery and did a dalvik cache wide/format. Up and running!
MrDanMak said:
So I have it installed and it boots. The issue I keep encountering is with Google Services Framework popping up all the time, so I can't get past the setup screen. Anyone have any ideas?
EDIT: Never mind. Just installed stock recovery and did a dalvik cache wide/format. Up and running!
Click to expand...
Click to collapse
Can u show some screenshots please?
berka38 said:
Can u show some screenshots please?
Click to expand...
Click to collapse
Sure thing. Attached.

Touch screen is not working on custom ROMs and Kernels

I see more and more people had problem like this, touch screen on new phones is not working at all in custom ROMs and also in OrangeFox. Nobody changed display nor play with phone internals.
DarthJabba9 said:
Do I have an ebbg display? You will already know if you do, because your touchscreen will not work on most custom ROMs, and will not have worked on any earlier version of OrangeFox. So, if you have been using any earlier release of OrangeFox, then you clearly do not have an ebbg display. You can check by installing the "Device HW Info" app from the Play Store. When you run it, check the "LCM" on the start page. If you see "ebbg" appearing anywhere in that, then you do have an ebbg display.
Click to expand...
Click to collapse
Phones manufactured 05/2018 and later can face this issue.
Manufactured date is located at sticker at the back of the phone box.
Despcription:
Seems that kernel is responsible to make touch to work. Its not easy to make ebbg display touch work in custom GPL kernels, only ROM which use prebuilt kernel that comes with the device tree is working right now.
Big thanks to DarthJabba9 who is fix that in OrangeFox recovery. https://forum.xda-developers.com/re.../official-orangefox-recovery-project-t3807479
What is working:
Recovery:
- OrangeFox R7
- TWRP official
- RedWolf Unofficial
ROMs:
- Xiaomi roms global stable ROM 7.1, global dev beta 8.1,
- Dirty unicorns 7.1 posted here: https://forum.xda-developers.com/red...-plus-t3812630
- AOSP Extended 5.7
What is not working:
- OrangeFox 5.1, r6
- KERNEL: Dark ages Segundo, LH kernel
- Pixel experience https://forum.xda-developers.com/redmi-note-5/development/rom-pixel-experience-t3797696
- Liquid remix https://forum.xda-developers.com/redmi-note-5/development/rom-liquid-remix-t3809286
- AOSP Extended 5.6
---account closed
It's not a "feature". Xiaomi probably used a different screen for later batches of Vince. What month was your phone manufactured?
what works:
moved to main post
sigma392 said:
It's not a "feature". Xiaomi probably used a different screen for later batches of Vince. What month was your phone manufactured?
Click to expand...
Click to collapse
where I can find this, in CIT?
I found this App called Device info HW on the Appstore. When i open it on my redmi 5 plus it says: Touchscreen -> synaptics_dsx_i2c
But I'm not sure if thats what youre looking for ...
Btw my phone has the same problem too
Mine has same info in aida64 and device info hw and touch works in every rom, kernel and recovery.
jes0411 said:
Mine has same info in aida64 and device info hw and touch works in every rom, kernel and recovery.
Click to expand...
Click to collapse
can you please share what rom,kernel and recovery you using right now?
mik.y said:
can you please share what rom,kernel and recovery you using right now?
Click to expand...
Click to collapse
Recovery: orangefox r6
Rom: omnirom official
Kernel: default from the rom
I used previously resurrection remix and then havoc and used all kernel (DA, LH and Universe)
Also used TWRP and Red Wolf.
Edit:
Sorry, I missed that ebbg thing in aida64 screenshot.
I have all the same except ebbg.
I am having same issue. Touchscreen sometimes hang during regular use. Its annoying. DotOs
mubeenshahid said:
I am having same issue. Touchscreen sometimes hang during regular use. Its annoying. DotOs
Click to expand...
Click to collapse
sorry,you dont. we are talking about not working touch screen all the time,not just sometimes.
jes0411 said:
Recovery: orangefox r6
Rom: omnirom official
Kernel: default from the rom
I used previously resurrection remix and then havoc and used all kernel (DA, LH and Universe)
Also used TWRP and Red Wolf.
Edit:
Sorry, I missed that ebbg thing in aida64 screenshot.
I have all the same except ebbg.
Click to expand...
Click to collapse
can you please post your aida screenshot? thanks
mik.y said:
can you please post your aida screenshot? thanks
Click to expand...
Click to collapse
Here it is.
mik.y said:
where I can find this, in CIT?
Click to expand...
Click to collapse
It's located at sticker at the back of the phone and at the Box. Interesting to note that we share the same sensor yet your touch doesn't work. Mine was Manufactured last 12/2017
mubeenshahid said:
I am having same issue. Touchscreen sometimes hang during regular use. Its annoying. DotOs
Click to expand...
Click to collapse
For this, flash the baseband at the main post. If it fails, your FP sensor may be dirty. I had instances where a dirty FP causes some intermittent touch issues.
I just saw, and mine was manufactured on 06/2018
But anyways i got some progress ....
I tried installing various custom roms this afternoon, after some flashing i got one to work. It's the AOSP Extended mod for Vince. I think it worked cause the rom has a miui (Oreo 8.1) based bootloader, kernel or both ... I'm not sure what it is. The rom looks good (It's similar to the Pixel Experience). I had some bootloop problems at the beginning, but after i updated the bootloader it works fine.
Qu4k3_92 said:
I just saw, and mine was manufactured on 06/2018
But anyways i got some progress ....
I tried installing various custom roms this afternoon, after some flashing i got one to work. It's the AOSP Extended mod for Vince. I think it worked cause the rom has a miui (Oreo 8.1) based bootloader, kernel or both ... I'm not sure what it is. The rom looks good (It's similar to the Pixel Experience). I had some bootloop problems at the beginning, but after i updated the bootloader it works fine.
Click to expand...
Click to collapse
there are 4 versions, which one?
mik.y said:
there are 4 versions, which one?
Click to expand...
Click to collapse
This one, the v5.7: https://www.google.com/amp/s/forum....pment/rom-aospextended-rom-v4-6-t3752135/amp/
mik.y said:
I see more and more people had problem like this, touch screen on new phones is not working at all in custom ROMs and also in OrangeFox. Nobody changed display nor play with phone insides. Maybe some new "feature" introduced by Xaiomi? I would like to somebody help me investigate this.
Plase notice that this display is "ebbg".
what is working:
Recovery:
- TWRP official 3.2.2.0
- RedWolf Unofficial
ROMs:
Xiaomi roms global stable ROM 7.1, global dev beta 8.1,
Dirty unicorns 7.1 posted here: https://forum.xda-developers.com/red...-plus-t3812630
what is not working:
- TWRP official 3.2.2.0 + OrangeFox 5.1, r6
- Pixel experience https://forum.xda-developers.com/redmi-note-5/development/rom-pixel-experience-t3797696
Click to expand...
Click to collapse
I see the driver is not loaded in kernel
Will be fixed on next release
blacksuan19 said:
I see the driver is not loaded in kernel
Will be fixed on next release
Click to expand...
Click to collapse
in what kernell/rom?
blacksuan19 said:
I see the driver is not loaded in kernel
Will be fixed on next release
Click to expand...
Click to collapse
I saw there is a new release.... Did they fix it?
(I would try it by myself but i dont have enough connection a the moment)

Fingerprint is not working on any custom rom mido

I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
krishna.rag said:
I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
Click to expand...
Click to collapse
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
kamalder said:
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
Click to expand...
Click to collapse
Yeah, I am just using a single user still not able to add even a single fingerprint.
amnher said:
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
Click to expand...
Click to collapse
I tried latest global beta and latest stable but still facing the same.
If you tell me which one worked for you then I'll be very thankful. ?
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
Tried not working.
But one thing that I have observed is whenever I add another user it works for the other user and in guest mode as well but only not working for admin user.
I had the same issue. I downloaded older version of the gapps and I fix the issue.
flash this file from twrp i think your problem will be solved
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks buddy, it worked
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
REALLY GOOD JOB. THANKS A LOT! I spend more than a week looking for a solution.
It's working. Thank you very much. My was working partially, now this perfect, rom AOSP Extended Pie.
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thank you sir! It is working again (Arrow-v9.0-mido-OFFICIAL-20190327)
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
really thanks dude. It works. thanks again!
Thank you so much
Thank you so much, fingerprint scanner now works
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a ton
Worked for me . Iam using the CAF version of pixel experience (15/06)
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
I'm sorry I'm new to this, may I know how to change the firmware
Update,, I found the answer, I can flash it after the Rom
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a lot working perfectly.:laugh::laugh:
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks alot brother
was searching for this for the last 3 days
thank you soo much
i tested many ways , many Roms and kernels , with encryption and without!
just with flashing this , it solved

Pixel Experience Poco F1 Touch/Stuck Issue

I installed pixel experience (not caf) rom today on my poco F1 and the look and feel is great..but when I'm using it the touch isnt working sometimes it stucks. Only fix is to lock and unlock phone again ..then after couple minutes the issue will appear again need help
I have the same issue
If anyone knows how to fix this please help me!! Much appreciated
What version of the vendor did you flash?
It needs to be higher than 9.2.15
riseofsand said:
What version of the vendor did you flash?
It needs to be higher than 9.2.15
Click to expand...
Click to collapse
beryllium-9.4.1-9.0
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
This happens for me too whenever I have TWRP recovery installed, with any ROM (both stock *and* custom ones). I only get this behaviour when entering my SIM cards PIN code or when booting TWRP (I can't swipe so I must turn the screen off, wait for about 5 seconds, then turn it in again)
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
vamshikailasa said:
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
Click to expand...
Click to collapse
Did u use aosp version? What is the most stable ? Most battery efficient? More smooth? Can u tell me answers for each questions? Thanks alot
Mooatreides said:
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
Click to expand...
Click to collapse
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
u wont face any touch issues if u use 9.3.28 kernel, only stock kernel has no issues with touch, idk if pe will boot with it or not... try it yourself, bt i am sure that 9.3.28 has the best touch drivers.
gigishan said:
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
Click to expand...
Click to collapse
Well try man and see, go for aosp
U can just take the boot.img from miui also only. On PE
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Hahaha yeah man thank u so much for the help
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Mariorio said:
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Click to expand...
Click to collapse
Just flash the kernal alone you will be fine
Will just leave it here. Hope someone finds it useful.
I fixed the screen freeze issue using the vendor-firmware and kernel fix on the links below:
Files:
beryllium-9.4.12-9.0-vendor-firmware.zip
kernel-beryllium_global_9.4.12-ak2.zip​
Links here.
Also, I am on Lineage OS, latest build.
Thank you for this thread!
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Edu Lezcano said:
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Click to expand...
Click to collapse
Will these vendor and kernel combo work for the latest Pixel Experience update(05082019)?

Xiaomi Redmi Note 2 Pie Rom (9.0)

Has anyone already tested this rom?
RR-P-v7.0.0-20190227-hermes-Unofficial
https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg
Noob9496 said:
Has anyone already tested this rom?
RR-P-v7.0.0-20190227-hermes-Unofficial
https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg
Click to expand...
Click to collapse
If it's from this thread then it bootloops
coolikar said:
If it's from this thread then it bootloops
Click to expand...
Click to collapse
Maybe after flashing by new recovery this rom will work.
New recovery https://eu.dl.twrp.me/hermes/twrp-3.3.0-1-hermes.img.html
Flashed the new twrp but hadn't had the time to flash the ROM.
Will try it out later today. Did you try flashing it? I don't know how the twrp version is tied to the ROM not booting, hovewer.
coolikar said:
Flashed the new twrp but hadn't had the time to flash the ROM.
Will try it out later today. Did you try flashing it? I don't know how the twrp version is tied to the ROM not booting, hovewer.
Click to expand...
Click to collapse
I will try to flash this rom this weekend. In the new recovery they introduced changes, maybe something will work.
Noob9496 said:
I will try to flash this rom this weekend. In the new recovery they introduced changes, maybe something will work.
Click to expand...
Click to collapse
Okay, flashed it with the new TWRP to no avail. Blank screen, didn't debug it or something to find out why, not experienced with this.
Didn't boot at all, so I think we should wait for the developer to go back to this and try fixing it.
coolikar said:
Okay, flashed it with the new TWRP to no avail. Blank screen, didn't debug it or something to find out why, not experienced with this.
Didn't boot at all, so I think we should wait for the developer to go back to this and try fixing it.
Click to expand...
Click to collapse
My log after flashing.
Noob9496 said:
My log after flashing.
Click to expand...
Click to collapse
no work
edited build.prop
New flashable zip with edited build.prop file. I didn't tested it.
It also adds the unpacked system.new.dat.br file for those more familiar with the topic of creating custom roms.
https://drive.google.com/open?id=1vq7jXHlRt21ag8k9UWe3j1b79Sq334P8 RR-P-v7.0.0-hermes-Unofficial
https://drive.google.com/open?id=1qaE1Du5QJMwAXKrme7eS2ikF4hU4Yazi system.zip
Working?
KimLeh said:
Working?
Click to expand...
Click to collapse
I try flash it via twrp3.3.0.1 today. Not working.
Where did u find these pie roms?
https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg!pAw0lYiA
So has anyone got this flashed and booting yet???
What recovery did you actually use?
Whats working and whats not?
Can you provide photos of the rom working?
What bugs did you find?
lohtse said:
So has anyone got this flashed and booting yet???
What recovery did you actually use?
Whats working and whats not?
Can you provide photos of the rom working?
What bugs did you find?
Click to expand...
Click to collapse
READ this post!!!
This ROM no booting
link error!
I think android pie is not able to run on this device.
intel_outside said:
I think android pie is not able to run on this device.
Click to expand...
Click to collapse
Yes, android pie does not work on this smartphone, just like android oreo. Only androids from version 5 to 7.1.2.
Noob9496 said:
Yes, android pie does not work on this smartphone, just like android oreo. Only androids from version 5 to 7.1.2.
Click to expand...
Click to collapse
This is android oreo fully working.
https://forum.xda-developers.com/re...o-lineageos-15-1-xiaomi-redmi-note-2-t4087575

Categories

Resources